| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| B-TOUGH A1, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A1 is recommended for use in liquid type epoxy systems (lowest polarity grade). | |
| B-TOUGH A2, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A2 is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). | |
| B-TOUGH A3, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A3 is recommended for use in solid type epoxy formulations (medium polarity grade). | |
| Brij™ C2 | Croda Coatings & Polymers | Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ C20 | Croda Coatings & Polymers | Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L23 | Croda Coatings & Polymers | Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L4 | Croda Coatings & Polymers | Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O10 | Croda Coatings & Polymers | Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O2 | Croda Coatings & Polymers | Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ O20 | Croda Coatings & Polymers | Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S10 | Croda Coatings & Polymers | Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S100 | Croda Coatings & Polymers | Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S2 | Croda Coatings & Polymers | Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S20 | Croda Coatings & Polymers | Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S721 | Croda Coatings & Polymers | Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...view more Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| CRODACOR BE | Croda Coatings & Polymers | Water-soluble corrosion inhibitor compatible in a wide range of formulations, particularly aqueous based formulations contained within tin plated steel aerosol cans. | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...view more Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| Crodamide S | Croda Coatings & Polymers | Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pre...view more Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures. This product is used to prevent adhesive granulates from sticking together during storage at moderate and low temperatures. Crodamide S also prevents adhesive film layers to attract dirt or stick together before application by reactivation or melting. It can be incorporated directly into polymers to prevent any unwanted adhesion. The amide migrates fast to the surface of the material on cooling to form a non-sticking ‘release’ layer. It may be used in conjunction with organic additives such as talc to enhance performance. view less | |
| Eco Soluryl 124 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 124 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is glycol ether free, provides good pigment dispersion, good ink transfer and printability, and is suita...view more Eco Soluryl 124 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is glycol ether free, provides good pigment dispersion, good ink transfer and printability, and is suitable for highly viscous inks. view less | |
| Eco Soluryl 72 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 72 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is ideal for use as a pigment grinding vehicle for glycol ether free ink, polymer surfactant for glycol e...view more Eco Soluryl 72 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is ideal for use as a pigment grinding vehicle for glycol ether free ink, polymer surfactant for glycol ether free emulsion, and coating materials for glycol ether free water base OPV. view less | |
| Eco Soluryl 824 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 824 is a glycol ether free grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, and excellent ink transfer and printability. | |
| Hypermer A70 | Croda Coatings & Polymers | Hypermer A70 is a polymeric O/W emulsifier and dispersant in non polar liquids for superior colloidal stability and minimum impact on coating properties. | |
| LoVOCoat Form 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Form 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in Exxsol D80. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| LoVOCoat Stable 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Stable 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in water. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| Maxemul 5010 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 5011 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6106 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and el...view more Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6112 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6112 - Copolymerizable Anionic Surfactant is a non-migratory, anionic surfactant for superior emulsion stability in latex systems and excellent moisture resistance or adhesive properties in coatings or psa's. | |
| Maxemul™ 7000 Series | Croda Coatings & Polymers | Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory dir...view more Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory directives will dramatically change the coatings market in the coming years and solvent-borne resins could disappear. One use of these polymeric non-migratory or reactive emulsifiers is to produce zero VOC resin emulsions to overcome these regulatory issues. view less | |
| Maxemul™ 7201 | Croda Coatings & Polymers | Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range o...view more Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. This product is used for industrial coatings and decorative coatings and paints. view less | |
| Maxemul™ 8201 | Croda Coatings & Polymers | Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has impro...view more Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| Maxemul™ 9107 – A Versatile Emulsifier for VOC Free Epoxy Emulsions | Croda Coatings & Polymers | Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film ...view more Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film properties. Its versatility makes it suitable for floor coatings, wall paints and direct-to-metal applications. view less | |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ Multifunctional Wetting Agents Sample Kit | Croda Coatings & Polymers | Multiwet™ Multifunctional Wetting Agents Sample Kit offers a range of functionalities to suit any aqueous formulation. The kit contains 5 Multiwet products. | |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| Myrj™ S100 | Croda Coatings & Polymers | Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applica...view more Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Myrj™ S40 | Croda Coatings & Polymers | Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicat...view more Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| Myrj™ S8 | Croda Coatings & Polymers | Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicati...view more Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. view less | |
| No. 1 Zinc Chromate | NiCHEM CORP. | No. 1 Zinc Chromate is an excellent corrosion inhibiting pigment meeting federal specification No. TT-P-465 Type I & II and ASTM D-444. It has a color index name of Yellow 36, and a color index number of 77955. | |
| No. 11 Strontium Phosphate | NiCHEM CORP. | No. 11 Strontium Phosphate is a non-toxic anti-corrosive, lead free, chrome free, pigment exhibiting outstanding resistance to salt spray, rust creepage and flash rusting in water systems as well as solvent type primers. It is a fine white powder that has...view more No. 11 Strontium Phosphate is a non-toxic anti-corrosive, lead free, chrome free, pigment exhibiting outstanding resistance to salt spray, rust creepage and flash rusting in water systems as well as solvent type primers. It is a fine white powder that has a particle size between 10 to 20 μm. view less | |
| No. 2 Basic Zinc Chromate | NiCHEM CORP. | No. 2 Basic Zinc Chromate is a corrosion inhibiting pigment with low solubility. It is especially suited for pretreatment primers (wash primers) and meets government specifications. | |
| No. 2Y Basic Lead Silico Chromate | NiCHEM CORP. | No. 2Y Basic Lead Silico Chromate is an excellent corrosion inhibitor that is easy dispersing basic silicon lead chromate and extremely stable. It is used in metal protective coatings and is specified for use in metal primers and finishes by state transpo...view more No. 2Y Basic Lead Silico Chromate is an excellent corrosion inhibitor that is easy dispersing basic silicon lead chromate and extremely stable. It is used in metal protective coatings and is specified for use in metal primers and finishes by state transportation departments and federal agencies. It has excellent color permanency and may be used in a variety of anti-corrosive finishes. view less | |
| No. 3 Strontium Chromate | NiCHEM CORP. | No. 3 Strontium Chromate is a corrosion inhibiting pigment for use in solvent and water based primer systems. | |
| No. 5 Magnesium Chromate | NiCHEM CORP. | No. 5 Magnesium Chromate is a partially soluble, rhombic, yellow, crystalline pigment offering oustanding corrosion resistance for epoxy, polyurethane and polysulfide systems. It has good chrome release on contact with water permitting the deposition of ...view more No. 5 Magnesium Chromate is a partially soluble, rhombic, yellow, crystalline pigment offering oustanding corrosion resistance for epoxy, polyurethane and polysulfide systems. It has good chrome release on contact with water permitting the deposition of a molecular protective film on the substrate. view less | |
| No. 6 Barium Chromate | NiCHEM CORP. | No. 6 Barium Chromate is low salt and meets Military specification MIL-B550A Grade A. | |
| No. 7 Zinc Phosphate | NiCHEM CORP. | No. 7 Zinc Phosphate is a coorosion resistant pigment for application where other metals and colors are not desired. It offers a low hiding white pigment to the industrial user. This product is generally considered non-toxic and requires no special prote...view more No. 7 Zinc Phosphate is a coorosion resistant pigment for application where other metals and colors are not desired. It offers a low hiding white pigment to the industrial user. This product is generally considered non-toxic and requires no special protective measures upon application. view less | |
| No. 8842 Calcium Chromate | NiCHEM CORP. | No. 8842 Calcium Chromate is a chromate primer poigment that is easy dispersing. It is soluble in diluted acids and slightly soluble in water. | |
| Priamine™ 1073 | Croda Coatings & Polymers | Priamine™ 1073 is for high end polyamide applications, for which it offers the highest purity and di-functionality. | |
| Priamine™ 1074 | Croda Coatings & Polymers | Priamine™ 1074 is for high end polyamide applications, for which it offers the highest purity and di-functionality. | |
| Priamine™ 1075 | Croda Coatings & Polymers | Priamine™ 1075 is for high molecular weight polyamides for high-end applications. This dimer diamine grade has a high purity, high difunctionality and low color. | |
| Priplast™ 1838 Polyester Diol | Croda Coatings & Polymers | Priplast™ 1838 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substra...view more Priplast™ 1838 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plastics. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 1839 Polyester Diol | Croda Coatings & Polymers | Priplast™ 1839 Polyester Diol is a polyester diol with an acid value of 1. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, an...view more Priplast™ 1839 Polyester Diol is a polyester diol with an acid value of 1. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 2101 | Croda Coatings & Polymers | Priplast™ 2101 is an epoxy toughened resin that brings flexibility. It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 2102 | Croda Coatings & Polymers | Priplast™ 2102 is an epoxy toughened resin that enhances hydrophobicity, weatherability and compatibility with organic matrices (tar etc.). It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 2103 | Croda Coatings & Polymers | Priplast™ 2103 is an epoxy toughened resin and adhesive. It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 2104 | Croda Coatings & Polymers | Priplast™ 2104 is an epoxy toughened resin made from natural raw materials. It's a dimer acid traditionally used in epoxy resins. | |
| Priplast™ 3162 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3162 Polyester Diol provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. | |
| Priplast™ 3172 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3172 Polyester Diol is a polyester diol with a hydroxyl value range of 35 to 41. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins...view more Priplast™ 3172 Polyester Diol is a polyester diol with a hydroxyl value range of 35 to 41. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3186 Polyester Polyol | Croda Coatings & Polymers | Priplast™ 3186 Polyester Polyol is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. It provides resistance to hydrolytic attack, alkal...view more Priplast™ 3186 Polyester Polyol is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3187 | Croda Coatings & Polymers | Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent w...view more Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent water resistance, hydrolytic stability, and good flow and wetting properties. This product is used for adhesives & sealants and elastomers applications. view less | |
| Priplast™ 3190 | Croda Coatings & Polymers | Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali ...view more Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3192 | Croda Coatings & Polymers | Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidati...view more Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3196 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3196 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatability for polymer blends. It has possible use in s...view more Priplast™ 3196 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatability for polymer blends. It has possible use in soft touch applications. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3198 Polyester Polyol | Croda Coatings & Polymers | Priplast™ 3198 Polyester Polyol is a low MW, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols and excellent hydrophobicity. It provides resistance t...view more Priplast™ 3198 Polyester Polyol is a low MW, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols and excellent hydrophobicity. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3286 | Croda Coatings & Polymers | Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow an...view more Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow and wetting properties. This product is used for adhesives & sealants, foams, and industrial coating applications. view less | |
| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative ...view more Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Pripol 1006 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Pripol 1006 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and exc...view more Pripol 1006 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Pripol™ 1006 F | Croda Coatings & Polymers | Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wettin...view more Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1006 F also is approved for food contact applications. view less | |
| Pripol 1009 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Pripol 1009 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. It provides water repellency,...view more Pripol 1009 Dimer Acid Hydrogenated is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. It provides water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Pripol™ 1010 | Croda Coatings & Polymers | Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, im...view more Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, advanced ceramics, and industrial coating applications. view less | |
| Pripol™ 1010 F | Croda Coatings & Polymers | Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, ...view more Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1010 F also is approved for food contact applications. view less | |
| Pripol™ 1013 | Croda Coatings & Polymers | Pripol™ 1013 is a high purity dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysi...view more Pripol™ 1013 is a high purity dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1017 | Croda Coatings & Polymers | Pripol™ 1017 is a dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemic...view more Pripol™ 1017 is a dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1025 | Croda Coatings & Polymers | Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow an...view more Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1025 F | Croda Coatings & Polymers | Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chem...view more Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product also features good flow and wetting properties and is approved for food contact applications. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Pripol™ 1027 | Croda Coatings & Polymers | Pripol™ 1027 is a low color grade, dimer acid building block for epoxy, polyurethane, as well as polyester and polyamide coatings and adhesives. It is used for resin modification that brings extreme water repellency, improved flexibility, excellent hydrol...view more Pripol™ 1027 is a low color grade, dimer acid building block for epoxy, polyurethane, as well as polyester and polyamide coatings and adhesives. It is used for resin modification that brings extreme water repellency, improved flexibility, excellent hydrolysis and chemical resistance, hydrolytic stability, as well as good flow and wetting properties. view less | |
| Pripol 2033 Dimerdiol | Croda Coatings & Polymers | Pripol 2033 Dimerdiol is a dimer diol building block with high difunctionality for polyurethane and polyester coatings, adhesives and elastomers. It provides good colour, water repellency, flexibility, thermo-oxidative stability and outstanding hydrolysis...view more Pripol 2033 Dimerdiol is a dimer diol building block with high difunctionality for polyurethane and polyester coatings, adhesives and elastomers. It provides good colour, water repellency, flexibility, thermo-oxidative stability and outstanding hydrolysis / chemical resistance. view less | |
| Pycal® 94 | Croda Coatings & Polymers | Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thi...view more Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thickening agents. view less | |
| SHD-852 Ammonia | Hanwha Chemical (Thailand) Co., Ltd. | SHD-852 Ammonia is a water-based resin solution for high performance dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink and offers improved dispersion and ink stability compared to conventional dispersion...view more SHD-852 Ammonia is a water-based resin solution for high performance dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink and offers improved dispersion and ink stability compared to conventional dispersion resin solutions. view less | |
| SHD-852 MEA | Hanwha Chemical (Thailand) Co., Ltd. | SHD-852 MEA is a Water-based resin solution for High performance Dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink, and offers improved dispersion and color strength compared to conventional dispersion r...view more SHD-852 MEA is a Water-based resin solution for High performance Dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink, and offers improved dispersion and color strength compared to conventional dispersion resin solutions. view less | |
| Soluryl 121W | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 121W is a low acid number solid resin for water-based products, and is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wood coating, and a coating materials for water-based OPV. | |
| Soluryl 160 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 160 is a high molecular weight for high performance water-based products and is compatible with most common emulsions. It is a high performance grade, provides excellent pigment dispersion, excellent ink transfer and printability, and good film fo...view more Soluryl 160 is a high molecular weight for high performance water-based products and is compatible with most common emulsions. It is a high performance grade, provides excellent pigment dispersion, excellent ink transfer and printability, and good film forming ability and adhesion. view less | |
| Soluryl 20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 20 is a low molecular weight styrene-acryl resin for water-based products. It is a gloss improving additives in water based overprint varnishes to produce a high gloss finish product. | |
| Soluryl 60L | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 60L has a low acid number and Low Tg solid resin for water-based products. It is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wall paper, blister pack, wood coating and graphic arts, coating m...view more Soluryl 60L has a low acid number and Low Tg solid resin for water-based products. It is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wall paper, blister pack, wood coating and graphic arts, coating materials for water base OPV, and solvent base ink and OPV. view less | |
| Soluryl 70 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 70 is a grinding vehicle and polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and good viscosity stability and high gloss. | |
| Soluryl 80 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 80 is a grinding vehicle & polymer surfactant for water-based products, and is compatible with most common emulsion. It is ideal for use as a pigment grinding vehicle, polymer surfactant for emulsion, and coating materials for water base OPV. | |
| Soluryl 802 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 802 is a resin solution for high performance water-based products. It provides excellent pigment dispersion, ink transfer and printability, good film forming property and adhesion, and has good compatibility with Soluryl emulsions. | |
| Soluryl 812 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 812 is a resin solution for water-based products. It provides good pigment dispersion, excellent ink transfer and printability, and good compatibility with Soluryl emulsions. | |
| Soluryl 90 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 90 is a grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and is suitable for mid viscous inks. | |
| Soluryl 902G | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 902G is a resin solution for pigment grinding. It provides good pigment dispersion, excellent ink transfer and printability, and good compatibility with Soluryl emulsions. | |
| Soluryl 94 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 94 is a glycol ether free grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, good ink transfer and printability, and is suitable for mid viscous inks. |
