NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol.
NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more
NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less
FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more
FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less
NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol.
NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more
NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less
NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more
NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less
BRB Siloen® DA 290 is solvent solution of a fluorosilicone fluid. It can be used as a silicone defoamer for solvent-free, solvent-borne, printing inks and ambient curing plastic system (epoxy and PU).
BRB Siloen® LA 271 is a glycol-modified silicone fluid. It is an additive for ink and coating applications, especially suitable for solvent and radiation curing with good substrate wetting.
BRB Siloen® PDA 222 is an alkyl modified siloxane. It can be used as a dispersant processing aid for pigments, fillers and additives used in paints or plastic applications.
BRB Siloen® SMA 280 is a 50% Polyether-modified siloxane solution in Di-propylene Glycol Methylether. It is a silicone additive for waterborne and solvent coatings with excellent slip and smoothness.
BRB Siloen® SMA 283 is a Polyether-modified siloxane. It can be used as a silicone additive for waterborne and solvent coatings with excellent slip, smoothness and anti-crater effect.
BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect.
BRB Siloen® SMA 285 is a 30% active emulsion of a high molecular weight silicone urethane resin. It can be used as a silicone additive for water-based coatings.
BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coating...view more
BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coatings. It can also act as an intermediate for polymers modification. view less
BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints.
BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints.
BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...view more
BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. view less
BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints.
BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc.,...view more
BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc., as well as non-stick coatings for toaster, grills, BBQs, etc. view less
BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used...view more
BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used for ambient curing heat resistant paint. (Automotive parts, industrial coatings, ovens, stoves and barbecues). view less
BRB Siloen® TA 394 is a solvent based high molecular weight polydimethylsiloxane formulation, designed as a hammertone finish additive. It provides a hammertone finish effect to paints and coatings.
BRB Siloen® WA 261 is a modified trisiloxane that provides outstanding surface tension reduction and super spreading properties. It is a surface wetting additive for coatings and inks.
BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint...view more
BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint varnishes. view less
Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in ...view more
Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in water and has a boiling point of approximately 320 degrees Fahrenheit. view less
Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This prod...view more
Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This product is insoluble in water and has a mild odor. Its boiling point is approximately 320 degrees Fahrenheit, and contains 22-23% solids. view less
Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product h...view more
Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH of 7.0 +/- 1.0. It is designed for pigment dispersion in water-based coatings. view less
Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has ...view more
Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH of 9.0 +/- 0.5 and a boiling point of 100 degrees Celsius. It is designed for pigment dispersion in water-based coatings. view less
Flexisperse™ 225 is a methacrylic acid polymer (9000 M.Wt.) which is a highly effective dispersant, anti-scalant, deflocculent, and rheology modifier. Produces stable dispersions and suspensions at high concentrations, with lower viscosities.
Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- ...view more
Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- 1.0. It has a boiling point of 100 degrees Celsius and contains 46-48% solids. view less
Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent,...view more
Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent, and emulsifying agent. Uses include hard surface cleaners, household and industrial cleaners, concentrated detergent, and textile applications. 50% actives. Acceptable for alkaline, acidic, and neutral pH formulations. view less
Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, h...view more
Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, hard surface cleaning, concentrated liquid, low foaming detergent, carpet care and maintenance, industrial cleaning, clean-in-place detergent, dry cleaning and car wash applicaitons. . view less
Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This ...view more
Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This product has a pH of 7.0 +/- 1.0 in a 10% aqueous solution and a boiling point of 100 degrees Celsius. view less
Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiw...view more
Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiwet™ NF is used in floor polish and stipper, carpeet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. view less
Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used...view more
Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used in floor polish and stripper, carpet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. view less
Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 ...view more
Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 and 8.0 and is soluble in water. Its boiling point is approximately 100 degrees Celsius. view less
No. 1 Zinc Chromate is an excellent corrosion inhibiting pigment meeting federal specification No. TT-P-465 Type I & II and ASTM D-444. It has a color index name of Yellow 36, and a color index number of 77955.
No. 11 Strontium Phosphate is a non-toxic anti-corrosive, lead free, chrome free, pigment exhibiting outstanding resistance to salt spray, rust creepage and flash rusting in water systems as well as solvent type primers. It is a fine white powder that has...view more
No. 11 Strontium Phosphate is a non-toxic anti-corrosive, lead free, chrome free, pigment exhibiting outstanding resistance to salt spray, rust creepage and flash rusting in water systems as well as solvent type primers. It is a fine white powder that has a particle size between 10 to 20 μm. view less
No. 2 Basic Zinc Chromate is a corrosion inhibiting pigment with low solubility. It is especially suited for pretreatment primers (wash primers) and meets government specifications.
No. 2Y Basic Lead Silico Chromate is an excellent corrosion inhibitor that is easy dispersing basic silicon lead chromate and extremely stable. It is used in metal protective coatings and is specified for use in metal primers and finishes by state transpo...view more
No. 2Y Basic Lead Silico Chromate is an excellent corrosion inhibitor that is easy dispersing basic silicon lead chromate and extremely stable. It is used in metal protective coatings and is specified for use in metal primers and finishes by state transportation departments and federal agencies. It has excellent color permanency and may be used in a variety of anti-corrosive finishes. view less
No. 5 Magnesium Chromate is a partially soluble, rhombic, yellow, crystalline pigment offering oustanding corrosion resistance for epoxy, polyurethane and polysulfide systems. It has good chrome release on contact with water permitting the deposition of ...view more
No. 5 Magnesium Chromate is a partially soluble, rhombic, yellow, crystalline pigment offering oustanding corrosion resistance for epoxy, polyurethane and polysulfide systems. It has good chrome release on contact with water permitting the deposition of a molecular protective film on the substrate. view less
No. 7 Zinc Phosphate is a coorosion resistant pigment for application where other metals and colors are not desired. It offers a low hiding white pigment to the industrial user. This product is generally considered non-toxic and requires no special prote...view more
No. 7 Zinc Phosphate is a coorosion resistant pigment for application where other metals and colors are not desired. It offers a low hiding white pigment to the industrial user. This product is generally considered non-toxic and requires no special protective measures upon application. view less
Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous s...view more
Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. Its melting point is below 55 degrees Celsius. view less
Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial ...view more
Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial or architectural paints and coatings. This product is soluble in water and has a pH of 5.5 +/- 1.0 in a 5% aqueous solution. view less
Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This produ...view more
Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This product is soluble in water and has low-foaming properties. It has a pH of 4.5 +/- 1.5 in a 5% aqueous solution. view less
Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1...view more
Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1.0 in a 1% aqueous solution, and a boiling point of approximately 100 degrees Celsius. view less
Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution...view more
Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a melting point under 55 degrees Celsius. view less
Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aq...view more
Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a boiling point of approximately 100 degrees Celsius and is designed for use in VOC-sensitive systems. view less
Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contai...view more
Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contains 100% active ingredients. It has a pH of 2.5 to 4.0, and a melting point between 55 and 65 degrees Celsius. view less
Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in w...view more
Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in water and contains 28% active ingredients. It has a pH of 9.0 +/- 1.0 and a boiling point of 100 degrees Celsius. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.