| 1,4-Cyclohexanedimethanol (CHDM) | Yantai Suny Chem International Co., Ltd. | 1,4-Cyclohexanedimethanol (CHDM) is miscible with water and alcohol, soluble in ketone, and insoluble in ether and aliphatic hydrocarbon. It is both hard and flexible, with high TG, and offers excellent heat stability, good solubility, and good weather re...view more 1,4-Cyclohexanedimethanol (CHDM) is miscible with water and alcohol, soluble in ketone, and insoluble in ether and aliphatic hydrocarbon. It is both hard and flexible, with high TG, and offers excellent heat stability, good solubility, and good weather resistance. This product is mainly used in polyesters, such as polyester fibers, and unsaturated polyester resins like PETG, PCT, PCTG, PCTA, and more. It can enhance the reactivity in polyester compounds, and improve the hydrolytic stability, plasticity, gloss, transparency, printability, and processing ability of the polymer. CHDM can also be used in powder coating applications, which could enhance low temperature resistance and weather resistance of coatings, and improve the gloss of the coating surface. view less | |
| 15% POTASSIUM HEX-CEM | Borchers, A Company of OMG | 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is...view more 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is also capable of stabilizing the rheological and the pot life behaviour of waterborne 2-components PUR systems, and it can positively affect the haze-values of these paint systems. view less | |
| 21% COBALT HYDROXY TEN-CEM | Borchers, A Company of OMG | 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, ...view more 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint. view less | |
| Acrylic Resin Sacryl 2044 | Yantai Suny Chem International Co., Ltd. | Acrylic Resin Sacryl 2044 is a thermoplastic solid acrylic resin with excellent weather ability, unique hardness, and flexibility. | |
| Additive OF | Borchers, A Company of OMG | Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally co...view more Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally compatible with polyol and isocyanate products. However, storage stability is not assured in all combinations. Its suitability for individual applications must be tested carefully. It is suitable for solventborne polyurethane coatings and can be added both to the polyol component and to the isocyanate component. view less | |
| Additive TI | Borchers, A Company of OMG | Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI ...view more Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing. Application of Additive TI in a polyurethane coating formulation, prevents moisture-related problems such as gloss reduction, haze, yellowing and reaction foam. It can also react with other active hydrogen compounds, such as alcohols, phenols, amines, amides and so on. This product eliminates moisture introduced with solvents, pigments, and fillers in 1-component as well as in classical 2-component PU systems. view less | |
| Aldehyde Ketone Resin SN-206 | Yantai Suny Chem International Co., Ltd. | Aldehyde Ketone Resin SN-206 has a wide application in ink industry in Europe, American and Japan. It has a good name of “universal resin” in plastic gravure printing ink. This product features light color, transparent, non-toxic, non-saponified hardened ...view more Aldehyde Ketone Resin SN-206 has a wide application in ink industry in Europe, American and Japan. It has a good name of “universal resin” in plastic gravure printing ink. This product features light color, transparent, non-toxic, non-saponified hardened resin, soluble in all coating solvents except aliphatic hydrocarbon and water, with good compatibility with most resins and plasticizers. view less | |
| Aldehyde Ketone Resin SN-221 | Yantai Suny Chem International Co., Ltd. | Aldehyde Ketone Resin SN-221 has a wide application in ink industry in Europe, American and Japan. It has a good name of “universal resin” in plastic gravure printing ink. Aldehyde Ketone Resin SN-221 features light color, transparent, non-toxic, non-sapo...view more Aldehyde Ketone Resin SN-221 has a wide application in ink industry in Europe, American and Japan. It has a good name of “universal resin” in plastic gravure printing ink. Aldehyde Ketone Resin SN-221 features light color, transparent, non-toxic, non-saponified hardened resin, soluble in all coating solvents except aliphatic hydrocarbon and water, with good compatibility with most resins and plasticizers. view less | |
| Aldehyde Resin SN-81 | Yantai Suny Chem International Co., Ltd. | Aldehyde Resin SN-81 is soluble in almost all paint solvents and compatible with practically all coating raw materials. It can increase the solid content in coating and improve the film thickness, gloss, hardness and aging resistance with low viscosity an...view more Aldehyde Resin SN-81 is soluble in almost all paint solvents and compatible with practically all coating raw materials. It can increase the solid content in coating and improve the film thickness, gloss, hardness and aging resistance with low viscosity and good fluidity. It can also be used in baking paint as it will not decompose to send off peculiar smell or influence the luster. In addition to universal pigment paste, baking paint, metal, wood and paper coating, this product can also be used for UV, shoe polish, adhesive and pencil lacquer applications. view less | |
| Aldehyde Resin SN-81-1 | Yantai Suny Chem International Co., Ltd. | Aldehyde Resin SN-81-1 is a pale, yellowing-resistant aldehyde resin that is soluble in almost all paint solvents and compatible with most coating raw materials. Its main uses are in combination with other resin binders and the production of all-purpose p...view more Aldehyde Resin SN-81-1 is a pale, yellowing-resistant aldehyde resin that is soluble in almost all paint solvents and compatible with most coating raw materials. Its main uses are in combination with other resin binders and the production of all-purpose pigment pastes. view less | |
| Anti-blocking agent ER | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent ER is a white waxy solid, which is including long-chain carbon and polar amide group in molecular structure. It is not soluble in water, but can be soluble in ethanol, ether, acetone, and xylene, etc. | |
| Anti-blocking agent SR | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent SR is a neutral white waxy solid, which is produced through short-range molecular distillation and purification. It can be miscible with paraffin, dissolved in ethanol, chloroform, ether but not in water. | |
| Ascinin® Anti Skin 0444 | Borchers, A Company of OMG | Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special...view more Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided. Ascinin® Anti Skin 0444 contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is suitable for all solventborne and solvent-free oxidatively drying coatings. It might be used in clear-coats as well as in pigmented systems. This product is solved in a non-VOC solvent, so it contains a very low VOC portion and is of low odour. Hence it is especially recommendable for VOC-reduced coatings, High-Solids-paints, printing inks and for use in environmentally friendly coatings. view less | |
| Ascinin® Anti Skin 0445 | Borchers, A Company of OMG | Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and...view more Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is a clear, low viscous, colorless to yellowish liquid. This product is solved in a high flashpoint alcoholic solvent. It is suitable for common solventborne coatings as well as for polar and waterborne formulations. Ascinin® Anti Skin 0445 might be used in clearcoats as well as in pigmented systems. view less | |
| Aspartic Ester Resin Sunaspar SN220 | Yantai Suny Chem International Co., Ltd. | Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light cor...view more Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light corrosion protection, bubble landscape coating, fan blade coating and concrete water proofing materials. view less | |
| Aspartic Ester Resin Sunaspar SN420 | Yantai Suny Chem International Co., Ltd. | Aspartic Ester Resin Sunaspar SN420 is a solvent free amine-functional aspartic ester resin, as a reactive partner for polyisocyanates. It is similar to NH 1420 and high solid content and low viscosity. | |
| Aspartic Ester Resin Sunaspar SN520 | Yantai Suny Chem International Co., Ltd. | Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent ha...view more Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent hardness, fullness, leveling and gloss properties. It also has good resistance to weather, solvents, acids and alkalies and saline water. This product is widely used in automobile, industrial, and anti-corrosion paints. view less | |
| Aspartic Ester Resin Sunaspar SN524 | Yantai Suny Chem International Co., Ltd. | Sunaspar SN524 is a solvent-free amine-functional aspartic ester resin, as a reactive partner for polyisocyanates. It has high solids content, low viscosity, and high reactivity. This product offers excellent hardness, fullness, leveling, and gloss. It i...view more Sunaspar SN524 is a solvent-free amine-functional aspartic ester resin, as a reactive partner for polyisocyanates. It has high solids content, low viscosity, and high reactivity. This product offers excellent hardness, fullness, leveling, and gloss. It is widely used in high grade industrial paint such as car paint and high grade wood paint, as well as anti-corrosive coatings and bubble landscape coatings. view less | |
| Borchers® AF 0670 | Borchers, A Company of OMG | Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during produ...view more Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during production/application of water based paints and coatings, inks and adhesives. view less | |
| Borchers® AF 0871 | Borchers, A Company of OMG | Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable ...view more Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable with water and efficient in most polymer dispersions. It is particularly suitable for highly filled pigmented systems and pigment pastes grinding. The efficiency is independent of the curing mechanism. Borchers® AF 0871 increases density during manufacturing process and application. It provides homogenous film built after application. It has been designed for use in water based emulsions and water-thinnable systems. The efficiency is proven in chemically curing systems based on polyurethanes (including acrylate modification) and acrylates (also hydroxyl bearing polyacrylates). view less | |
| Borchers® AF 1171 | Borchers, A Company of OMG | Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This ...view more Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This product improves the film gloss, substrate wetting, colour strength in pigmented systems and avoids microfoam formation. It is easily emulsified in water and easy to incorporate. Borchers® AF 1171 is characterized by good binder compatibility and needs little shear force to incorporate. view less | |
| Borchers® AF T | Borchers, A Company of OMG | Borchers® AF T is a highly effective silicone-free defoamer for emulsion paints, paper coatings, glues, adhesives, textile auxiliaries and concrete additives. It both destroys foam and prevents its formulation. | |
| Borchers® Dry 0411 HS | Borchers, A Company of OMG | Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an orga...view more Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clear coats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® LH 10 | Borchers, A Company of OMG | Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. Thi...view more Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. This product improves the drying of chemically curing systems, such as aqueous two-component polyurethane coatings. At the same time, scratch resistance, hardness and mechanical persistence are positively influenced. In higher concentrations Borchers® LH 10 has a matting effect, and therefore should not be used in high gloss formulations. view less | |
| Borchi® Coll 10 | Borchers, A Company of OMG | Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it af...view more Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. Borchi® Coll also improves adhesion to wood, plastic and metal surfaces. It reduces the tendency towards under-rusting as a result of improved film quality and more uniform distribution of barrier properties on the substrate. view less | |
| Borchi® Coll 20 | Borchers, A Company of OMG | Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior pain...view more Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior paints based on polymer dispersions, such as copolymers of vinyl acetate, ethylene and vinyl chloride, have been achieved by the addition of Borchi® Coll 20. An addition rate of approximately 5 % increases film hardness and makes the films dirt-repellent. view less | |
| Borchi® Coll 20 M | Borchers, A Company of OMG | Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicat...view more Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. It also improves adhesion to wood, plastic and metal surfaces. This product is particularly suitable for use in waterborne isocyanate-modified alkyd resins and accelerates drying of the films. It also improves film strength and final film hardness. This product appears an opalescent turbid liquid view less | |
| Borchi® Coll 30 | Borchers, A Company of OMG | Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film ...view more Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film strength and hardness. At addition rates of up to 2 %, hiding power is increased without any adverse effect on gloss. It affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. view less | |
| Borchi® Gel 0434 | Borchers, A Company of OMG | Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optima...view more Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optimal viscosity in all waterborne coatings for application by brush or roller, especially under higher-shear conditions (> 1000 s-1). It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0435 | Borchers, A Company of OMG | Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. B...view more Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. Borchi® Gel 0435 is characterized by its extraordinary efficacy in most coating systems under high-shear conditions, which makes the product particularly well suited for setting the optimal viscosity in all waterborne coatings for application by roller or brush. It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0620 | Borchers, A Company of OMG | Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with bind...view more Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with binder particles and pigments a pronounced shear-thinning flow behavior. This product is suitable as thickening agent for all waterborne systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0621 | Borchers, A Company of OMG | Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other compon...view more Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other components of the system a shear-thinning flow behavior. It is well suited as thickening agent for all waterborne painting systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0625 | Borchers, A Company of OMG | Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity...view more Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity stability mainly in the range between 1000 s-1 - 10000 s-1. This product is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel 0626 | Borchers, A Company of OMG | Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high...view more Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high-shear range (1000 - 10000 s-1). It is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel ALA | Borchers, A Company of OMG | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| Borchi® Gel L 75 N | Borchers, A Company of OMG | Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of...view more Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of dispersed particles formed as a result of emulsion polymerisation. lt is characterised by good efficiency. lt improves the rheological properties of emulsion paints, making the end-products easier to apply with a roller or a brush despite a considerable increase in viscosity. The product can be combined with other thickeners to achieve special effects. Since it improves the flow properties of emulsion paints, Borchi® Gel L 75 N has proved particularly useful for thickening acrylic gloss paints and anti-corrosion coatings. view less | |
| Borchi® Gel LW 44 | Borchers, A Company of OMG | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and c...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| Borchi® Gel PN | Borchers, A Company of OMG | Borchi® Gel PN is an aqueous solution of an organic ammoniacal zirconium compound. Borchi® Gel PN is a thixotropic additive for use in water based coating systems, as well as in solvent-free systems. Borchi® Gel PN can be used in all water based coatin...view more Borchi® Gel PN is an aqueous solution of an organic ammoniacal zirconium compound. Borchi® Gel PN is a thixotropic additive for use in water based coating systems, as well as in solvent-free systems. Borchi® Gel PN can be used in all water based coatings containing hydroxyl and carboxyl groups able for interaction. Borchi® Gel PN works through a reaction of association of the active part of the Zirconium complex with reactive groups on the polymer in emulsion or thickener. view less | |
| Borchi® Gel PW 25 | Borchers, A Company of OMG | Borchi® Gel PW 25 is a non-ionic, polyurethane-based thickener dissolved in a 4:6 solution of water / propylene glycol. lt is particularly suitable for increasing the viscosity of ready-mixed textured finishes, decorative and industrial coatings. This pro...view more Borchi® Gel PW 25 is a non-ionic, polyurethane-based thickener dissolved in a 4:6 solution of water / propylene glycol. lt is particularly suitable for increasing the viscosity of ready-mixed textured finishes, decorative and industrial coatings. This product is characterised by exceptionally good thickening properties in most dispersion binders. It has a very high water retention capacity, so the coating can be applied over long periods. view less | |
| Borchi® Gen 0451 | Borchers, A Company of OMG | Borchi® Gen 0451 is a solvent-free polyurethane oligomer with excellent wetting and deflocculation properties. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization, which helps...view more Borchi® Gen 0451 is a solvent-free polyurethane oligomer with excellent wetting and deflocculation properties. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization, which helps achieve excellent color strength and high gloss. Borchi® Gen 0451 is especially recommended for high quality industrial, automotive and automotive refinishing paints as well as for preparing universal pigment pastes. It is suitable for both solvent based and water based systems. view less | |
| Borchi® Gen 0650 | Borchers, A Company of OMG | Borchi® Gen 0650 is an anionic, solvent- and APEOs-free wetting and dispersing agent for aqueous and solvent-borne systems, as well as for solvent-free formulations. Due to its anionic structure, this product is suitable for dispersing and stabilisation o...view more Borchi® Gen 0650 is an anionic, solvent- and APEOs-free wetting and dispersing agent for aqueous and solvent-borne systems, as well as for solvent-free formulations. Due to its anionic structure, this product is suitable for dispersing and stabilisation of pigments having polar surface. The additive produces an equal charge on the pigments surface and thus effectively prevents re-flocculation of pigments having various surface charges. view less | |
| Borchi® Gen 0755 | Borchers, A Company of OMG | Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabi...view more Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments, excellent color strength and high gloss is achieved. This product prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. view less | |
| Borchi® Gen 0851 | Borchers, A Company of OMG | Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blac...view more Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blacks and organic pigments, this product significantly reduces the viscosity of the mill base, enabling the production of highly concentrated pigment pastes. lt effectively inhibits pigment reflocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. Borchi® Gen 0851 enhances the gloss and reduces the haze of finishing paints. view less | |
| Borchi® Gen 1051 | Borchers, A Company of OMG | Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use...view more Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use in high-grade industrial coatings such as automotive-OEM and repair coatings, as well as in pigmented furniture finishes. Its main area of use is in two-component polyurethane-based systems and it shows optimal compatibility in medium-polar binder systems. view less | |
| Borchi® Gen 12 | Borchers, A Company of OMG | Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This pr...view more Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This product improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive effectively prevents a reflocculation of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. view less | |
| Borchi® Gen 1251 | Borchers, A Company of OMG | Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through steri...view more Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1251 is especially recommended for high quality industrial, automotive and automotive refinishing paints as well as for preparing pigment pastes. view less | |
| Borchi® Gen 1252 | Borchers, A Company of OMG | Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for prep...view more Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous and solventborne pigment concentrates with and without grinding resin. view less | |
| Borchi® Gen 1253 | Borchers, A Company of OMG | Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applica...view more Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applications. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1253 prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. In addition, this product contains no organic solvents whatsoever and is completely VOC-free. view less | |
| Borchi® Gen 1350 | Borchers, A Company of OMG | Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins...view more Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous pigment concentrates. Borchi® Gen 1350 reveals high dispersing and stabilizing capability for transparent iron oxide pigments as well as organic and inorganic pigments. view less | |
| Borchi® Gen 911 | Borchers, A Company of OMG | Borchi® Gen 911 is a wetting and dispersing agent dissolved in hydrocarbons for paints and pigment pastes containing solvent. It is specially recommended for alkyd resin based systems. This product consists of a combination of active ingredients with very...view more Borchi® Gen 911 is a wetting and dispersing agent dissolved in hydrocarbons for paints and pigment pastes containing solvent. It is specially recommended for alkyd resin based systems. This product consists of a combination of active ingredients with very good wetting and dispersion-promoting properties and also anti-settling properties during storage. It inhibits both re-agglomeration of the pigments and formation of hard sediment. Borchi® Gen 911 brings about rapid wetting and thus shortens the grinding process. The extremely fine pigment grind also leads to improved pigment yield, greater color intensity and better hiding power. It can be used in virtually all conventional lacquers and oil paints and is particularly suitable for systems containing pigments with a tendency to settle. view less | |
| Borchi® Gen DFN | Borchers, A Company of OMG | Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens...view more Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive - even when added afterwards - effectively prevents floating of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. This product is suitable for air-drying and baking emulsion paints and lacquers. The main areas of application are in pure acrylic, styrene-acrylic and styrene-butadiene dispersions. view less | |
| Borchi® Gen HE | Borchers, A Company of OMG | Borchi® Gen HE is an additive to used improve adhesion of baking paints and primers on metal substrate. It is also used to improve the fixation of metallic pigments in coatings. This product is completely silicone-free. Borchi® Gen HE shows good compatibi...view more Borchi® Gen HE is an additive to used improve adhesion of baking paints and primers on metal substrate. It is also used to improve the fixation of metallic pigments in coatings. This product is completely silicone-free. Borchi® Gen HE shows good compatibility with various resins; nevertheless a compatibility check is recommended. view less | |
| Borchi® Gen PB 60 | Borchers, A Company of OMG | Borchi® Gen PB 60 is excellently suited to the manufacture of stock pastes from powdered inorganic gelling agents in organic solvents, such as white spirit, xylene, butyl glycol. Borchi® Gen PB 60 can be used in styrenated alkyd resins; epoxy ester resins...view more Borchi® Gen PB 60 is excellently suited to the manufacture of stock pastes from powdered inorganic gelling agents in organic solvents, such as white spirit, xylene, butyl glycol. Borchi® Gen PB 60 can be used in styrenated alkyd resins; epoxy ester resins; alkyd / nitrocellulose; alkyd / urea / melamine silicone resins; chlorinated and cyclized rubber; vinyl resins PVC organosols / plastisols Unsaturated polyesters (UPR). view less | |
| Borchi® Gen SN 95 | Borchers, A Company of OMG | Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re...view more Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re-flocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. This product enhances the gloss and reduces the haze of finishing paints, contains no organic solvents whatsoever and is completely VOC-free. view less | |
| Borchi® Gol 0011 | Borchers, A Company of OMG | Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid ...view more Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid epoxy and polyurethane resins. This product acts as a flow promoter in such systems, destroying bubbles appearing during application and preventing crater formation. Borchi® Gol 0011 can be used in all conventional solvent-containing and solvent-free, liquid 2-component epoxy resin and polyurethane systems.. view less | |
| Borchi® Gol 1375 | Borchers, A Company of OMG | Borchi® Gol 1375 is a solution of non-ionic and amphoteric surfactants as active ingredients for the promotion of substrate wetting of hydrophobic or dirt/oil contaminated surfaces, VOC- and APEO-free. Borchi® Gol 1375 is a highly efficient additive with...view more Borchi® Gol 1375 is a solution of non-ionic and amphoteric surfactants as active ingredients for the promotion of substrate wetting of hydrophobic or dirt/oil contaminated surfaces, VOC- and APEO-free. Borchi® Gol 1375 is a highly efficient additive with strong surface affinity and low-foaming properties. It can be used in waterborne and solventborne systems. view less | |
| Borchi® Gol 3451 | Borchers, A Company of OMG | Borchi® Gol 3451 prevents levelling / flowing resulting in surface structures, used for creating special effects such as hammer-finish. Recoatability is not recommended with this product. It can be used in virtually all binder systems. | |
| Borchi® Gol 3467 | Borchers, A Company of OMG | Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi®...view more Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi® Gol 3467 can be used in waterborne and solvent borne. view less | |
| Borchi® Gol 3739 | Borchers, A Company of OMG | Borchi® Gol 3739 is a substrate wetting agent for aqueous paints. It improves wetting of critical supports like oil or grease contaminated steel, plastics and resinous wood. This product is highly efficient and has an excellent compatibility with most kin...view more Borchi® Gol 3739 is a substrate wetting agent for aqueous paints. It improves wetting of critical supports like oil or grease contaminated steel, plastics and resinous wood. This product is highly efficient and has an excellent compatibility with most kinds of water based binder systems. view less | |
| Borchi® Gol E2 | Borchers, A Company of OMG | Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-fre...view more Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-free and can be used in all solvent-containing and solvent-free, single- and multi-component paints. Factors affecting the efficacy of the surface-active substances, besides the type of binder used, are application and mixing conditions. view less | |
| Borchi® Gol H 250 | Borchers, A Company of OMG | Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with...view more Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with the solvent n-butanol may occur. view less | |
| Borchi® Gol LA 1 | Borchers, A Company of OMG | Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used ei...view more Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl-functional polyacrylates and polyesters, primarily polyester melamine or polyester isocyanate systems. In physically drying systems like water-soluble alkyds, polyurethane and acrylate dispersions, this product improves scratch, levelling and slip behaviour. view less | |
| Borchi® Gol LA 10 | Borchers, A Company of OMG | Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used eit...view more Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters , primarily polyester melamine or epoxy systems. Borchi® Gol LA 10 furthermore controls surface levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
| Borchi® Gol LA 2 | Borchers, A Company of OMG | Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension r...view more Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. Borchi® Gol LA 2 is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints like hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine or epoxy systems. It also supports levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. This product is especially recommended in systems where solvent-free additives or certain solvents are required. To facilitate incorporation ability it may be helpful to dissolve Borchi® Gol LA 2 in solvents glycol-, aliphatic-, aromatic-, or ester-based. view less | |
| Borchi® Gol LA 20 | Borchers, A Company of OMG | Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compati...view more Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine, epoxy and certain UV systems. It also controls surface effects in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
| Borchi® Gol LA 200 | Borchers, A Company of OMG | Borchi® Gol LA 200 is a solventless modified polysiloxane which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmen...view more Borchi® Gol LA 200 is a solventless modified polysiloxane which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmented industrial (including OEM, car repair) and all types of decorative coatings. It also positively influences optical film properties. view less | |
| Borchi® Gol LA 232 | Borchers, A Company of OMG | Borchi® Gol LA 232 is a solventless combination of modified polysiloxane and alcohol alcoxylated, which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be...view more Borchi® Gol LA 232 is a solventless combination of modified polysiloxane and alcohol alcoxylated, which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmented industrial (including OEM, car repair) and all types of decorative coatings. It can be also used in systems for the production of radiation-curable coatings for wood, wood-based materials, plastic, paper and printing inks. view less | |
| Borchi® Gol LA 30 | Borchers, A Company of OMG | Borchi® Gol LA 30 is a pre-diluted, highly efficient organo-modified silicone compound used to improve surface properties during and after application. This product will positively influence flow and levelling properties and formation of pin holes and cra...view more Borchi® Gol LA 30 is a pre-diluted, highly efficient organo-modified silicone compound used to improve surface properties during and after application. This product will positively influence flow and levelling properties and formation of pin holes and craters will be reduced. It can be used either for clearcoats or for pigmented coating systems. view less | |
| Borchi® Gol LA 50 | Borchers, A Company of OMG | Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the...view more Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the interfacial tension differences between the liquid and the substrate. This product reduces cratering and pin hole tendency and is compatible in most binders. It can be used for high quality clears and pigmented industrial and decorative coatings. view less | |
| Borchi® Gol LA 6 | Borchers, A Company of OMG | Borchi® Gol LA 6 is a pre-diluted, highly efficient organo-modified silicone compound to improve wetting ability on critical substrates. Furthermore, flow and leveling properties will be positively influenced.This product develops a strong surface tension...view more Borchi® Gol LA 6 is a pre-diluted, highly efficient organo-modified silicone compound to improve wetting ability on critical substrates. Furthermore, flow and leveling properties will be positively influenced.This product develops a strong surface tension reduction and can be used either for clearcoats or for pigmented coating systems. This product favourably controls optical film appearance with reduced haze and increased gloss. view less | |
| Borchi® Gol M 51 | Borchers, A Company of OMG | Borchi® Gol M 51 is a leveling and anti-floating agent. It is a very effective flow-promoter and appreciably reduces surface tension. lt acts as an anti-floating agent and can be used as an "anti-silicone", i.e. it counteracts defects in the surface of pa...view more Borchi® Gol M 51 is a leveling and anti-floating agent. It is a very effective flow-promoter and appreciably reduces surface tension. lt acts as an anti-floating agent and can be used as an "anti-silicone", i.e. it counteracts defects in the surface of paint films which may be caused by silicones in polishes. This product can be used both in systems which dry physically and in chemically curing systems, but its binder compatibility is limited. view less | |
| Borchi® Gol MA | Borchers, A Company of OMG | Borchi® Gol MA is a leveling and anti-floating agent. lt reduces surface tension and prevents horizontal floating of pigments. This product is very well suited to use in polymers which dry physically. lt acts as a very effective flow-promoter in numerous ...view more Borchi® Gol MA is a leveling and anti-floating agent. lt reduces surface tension and prevents horizontal floating of pigments. This product is very well suited to use in polymers which dry physically. lt acts as a very effective flow-promoter in numerous alkyd paints. In unsaturated polyester paints containing paraffin, it promotes uniform floating of the paraffin and de-aeration. However, the binder compatibility of this product is limited. view less | |
| Borchi® Gol OL 17 | Borchers, A Company of OMG | Borchi® Gol OL 17 is an additive used to improve flow properties and surface smoothness. This product eliminates spray structures, orange-peel and prevents the formation of craters. It is characterised by good binder compatibility and a high degree of eff...view more Borchi® Gol OL 17 is an additive used to improve flow properties and surface smoothness. This product eliminates spray structures, orange-peel and prevents the formation of craters. It is characterised by good binder compatibility and a high degree of efficiency in many binders. This product is water-soluble but its use in such solutions should always be preceded by extensive trials on account of their limited stability in waterborne binders. view less | |
| Borchi® Gol OL 31 | Borchers, A Company of OMG | Borchi® Gol OL 31 is an additive used to improve slip and leveling properties. This product is a very effective levelling agent. lt eliminates craters, spray structures and surface defects that may be caused by silicone products (e.g. in polishes). This p...view more Borchi® Gol OL 31 is an additive used to improve slip and leveling properties. This product is a very effective levelling agent. lt eliminates craters, spray structures and surface defects that may be caused by silicone products (e.g. in polishes). This product is usable in paints which dry physically as well as in chemically curing paints. lt is characterized by good binder compatibility and is particularly suitable for use in silicone resins. view less | |
| Borchi® Gol OL 44 | Borchers, A Company of OMG | Borchi® Gol OL 44 is an additive used to improve slip and leveling properties. It is an effective levelling agent. This product eliminates craters and spray structures and increases slip properties. It is very versatile and is characterized by good to ver...view more Borchi® Gol OL 44 is an additive used to improve slip and leveling properties. It is an effective levelling agent. This product eliminates craters and spray structures and increases slip properties. It is very versatile and is characterized by good to very good efficiency in baking paints based on alkyd resin, alkyd / amino resin combinations and in acrylic resin and acrylic / amino resin combinations. view less | |
| Borchi® Gol PL | Borchers, A Company of OMG | Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reductio...view more Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primers and undercoats. This product is particularly effective in unsaturated, paraffin-free polyester resins, epoxy resins and combinations of epoxy resins with phenolic resins or amino resins. view less | |
| Borchi® Kat 0243 | Borchers, A Company of OMG | Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. Borchi® Kat 0243 accelerates the chemical reaction between the alcohol and isocyanate component of polyurethane coating systems, thus allowing optimum steering of the drying properties, both during force-drying and curing at room temperature. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Borchi® Kat 0244 | Borchers, A Company of OMG | Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. The use of Borchi® Kat 0244 ensures fast blocking stability of polyurethane coatings. It also improves solvent resistance, high film hardness and early sandability of the coating. This product is suitable for automotive refinishing. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Borchi® Kat 0245 | Borchers, A Company of OMG | Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyuret...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less | |
| Borchi® Kat 24 | Borchers, A Company of OMG | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less | |
| Borchi® Kat 315 | Borchers, A Company of OMG | Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® Kat 320 | Borchers, A Company of OMG | Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be ...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® OXY - Coat | Borchers, A Company of OMG | Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent resul...view more Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in all coatings which dry by oxidation, such as Alkyd, vegetable oils, epoxy esters, polybutadiene etc. view less | |
| Borchi® OXY - Coat 1101 | Borchers, A Company of OMG | Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results...view more Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in any coating drying by oxidative crosslinking, e.g. alkyds, vegetable oils, epoxy esters, polybutadiene etc. view less | |
| Borchi® Set 134 | Borchers, A Company of OMG | Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action...view more Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action, Borchi® Set 134 is an excellent suspending agent for pigments and fillers. lt is also highly effective when used with heavy pigments and metal powders, offering particular advantages in zinc-rich paints for example. This product is an effective thixotropic agent and thickener for paints based on cold-curing epoxy resins,epoxy resin esters, alkyd resins, chlorinated and cyclised rubber, DD systems, vinyl resin polymers and copolymers. view less | |
| CEVA | Yantai Suny Chem International Co., Ltd. | CEVA is soluble in toluene and xylene. It has elasticity like rubber, good solubility and fluidity at room temperature. In addition, it has good weather resistance, chemical resistance, oil resistance, ozone resistance and flame resistance property. | |
| Chlorinated Polyolefin | Yantai Suny Chem International Co., Ltd. | Chlorinated Polyolefin is an adhesive resin used for coatings, adhesive to plastics, and hot melt adhesives. | |
| Chlorinated Polypropylene - Ink Type | Yantai Suny Chem International Co., Ltd. | Chlorinated Polypropylene - Ink Type is an effective adhesive for BOPP and effective binder for printing inks used on BOPP films. | |
| Fumed Silica | Yantai Suny Chem International Co., Ltd. | Fumed Silica is used widely in silicon rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. It is insoluble in all kinds of solvents and li...view more Fumed Silica is used widely in silicon rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. It is insoluble in all kinds of solvents and liquids except hydrofluoric acid and concentrated bases. view less | |
| Light Stabilizer (HALS) Sunuvin 400 | Yantai Suny Chem International Co., Ltd. | Sunuvin 400 is a liquid hydroxyphenyl-triazine(HPT) UV absorber which provides excellent performance in coatings. It is designed to fulfil the high performance and durability needs of waterborne, solvent borne and 100% solids automotive and industrial fin...view more Sunuvin 400 is a liquid hydroxyphenyl-triazine(HPT) UV absorber which provides excellent performance in coatings. It is designed to fulfil the high performance and durability needs of waterborne, solvent borne and 100% solids automotive and industrial finishes. view less | |
| MCEVA | Yantai Suny Chem International Co., Ltd. | MCEVA (Modified Chlorinated EVA) is mainly used with MCPP to make gravure plastic lamination ink and adhesive. This product is used to produce wear resistant, heavy corrosion resistant and self extinguishing coatings, high class adhesives, high quality pr...view more MCEVA (Modified Chlorinated EVA) is mainly used with MCPP to make gravure plastic lamination ink and adhesive. This product is used to produce wear resistant, heavy corrosion resistant and self extinguishing coatings, high class adhesives, high quality printing ink and plasticizer of PVC films. It is widely used in ship coating, road marking paint, swimming pool paint, chemical equipment and decoration paint for wood and cement. MCEVA can improve the adhesive property of paint for plastic film, and can also be used to produce tube, insulation cables, wires and shoes. view less | |
| MCPP | Yantai Suny Chem International Co., Ltd. | MCPP (Modified CPP) is an ester soluble Chlorinated PP supplied as a white to light yellow granular solid. It is more environmentally friendly without containing toluene and MEK. It will easily dissolve in weak polar solvents such as ethyl acetate, aceton...view more MCPP (Modified CPP) is an ester soluble Chlorinated PP supplied as a white to light yellow granular solid. It is more environmentally friendly without containing toluene and MEK. It will easily dissolve in weak polar solvents such as ethyl acetate, acetone, MEK, etc. It is not soluble in ethanol or IPA. This product is suitable for gravure plastic ink and is an effective adhesive for BOPP, PE, industrial coating, and toy coating. view less | |
| MHPT: 2-(N-Methyl-p-Toluidino) Ethanol | Yantai Suny Chem International Co., Ltd. | MHPT is an accelerant for unsaturated polyester resins. Benefits include fast curing speed and high purity. | |
| PE Wax Sunax 316 | Yantai Suny Chem International Co., Ltd. | PE Wax Sunax 316 is a kind of polyethylene wax. It has uniform particle size, with very good dispersability and gloss control, and is an excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can impro...view more PE Wax Sunax 316 is a kind of polyethylene wax. It has uniform particle size, with very good dispersability and gloss control, and is an excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. view less | |
| PE Wax Sunax 375 | Yantai Suny Chem International Co., Ltd. | PE Wax Sunax 375 is a kind of polyethylene wax. It has uniform particle size, is easy to disperse, and is an excellent additive for high performance coatings. Sunax 375 is suitable for offset printing ink, and solvent based flexo printing ink, and gravure...view more PE Wax Sunax 375 is a kind of polyethylene wax. It has uniform particle size, is easy to disperse, and is an excellent additive for high performance coatings. Sunax 375 is suitable for offset printing ink, and solvent based flexo printing ink, and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. It makes the ink of the benzene soluble and alcohol-soluble ink to have good ester adaptability. view less | |
| Phenyl Silane Oligomer Sunicon 6141 | Yantai Suny Chem International Co., Ltd. | Phenyl Silane Oligomer Sunicon 6141 can provide heat resistance, cold resistance, radiation resistance, weather resistance, rigidity, flame retardant. As an adhesion promoter, it is especially suitable for oil-based systems. It can be used as hydrophobic ...view more Phenyl Silane Oligomer Sunicon 6141 can provide heat resistance, cold resistance, radiation resistance, weather resistance, rigidity, flame retardant. As an adhesion promoter, it is especially suitable for oil-based systems. It can be used as hydrophobic treatment agent and lubricant for powder. More applications in adhesives, powder coatings, building materials coatings, modification. view less | |
| Polyisocyanate Sunicure 75 | Yantai Suny Chem International Co., Ltd. | Polyisocyanate Sunicure 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Sunicure 75 can increase the resistance of the bonds to heat, oil, plasticisers and many solvents. It also offers ...view more Polyisocyanate Sunicure 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Sunicure 75 can increase the resistance of the bonds to heat, oil, plasticisers and many solvents. It also offers good adhesion to many materials, especially plastics. This product is used in producing coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It can be used to bond many materials, such as wood, metal and plastic. The pale inherent color of Sunicure 75 permits its use in bonding transparent plastic films for packaging. view less | |
| PTFE Wax Sunax PTFE204 | Yantai Suny Chem International Co., Ltd. | PTFE Wax Sunax PTFE204 is a kind of PTFE wax. It has color white appearance, is ultra fine with evenly distributed particles, more delicate texture, and dispersed in good case for great scratch resistance properties. In coating application, it can make th...view more PTFE Wax Sunax PTFE204 is a kind of PTFE wax. It has color white appearance, is ultra fine with evenly distributed particles, more delicate texture, and dispersed in good case for great scratch resistance properties. In coating application, it can make the product have a very low coefficient of friction, and provides excellent abrasion and scratch resistance. Its main role on coating is to improve the lubrication of the paint, as well as the abrasion and corrosion resistance. view less | |
| Regulator ZL | Borchers, A Company of OMG | Regulator ZL is a stabilizer for solvent-free 2K-polyurethane paints. This finely milled powder is a highly acidic cation exchanger. Alkaline fillers may by catalytic action shorten the application time of solvent-free 2K-PU Desmophen® / Desmodur® systems...view more Regulator ZL is a stabilizer for solvent-free 2K-polyurethane paints. This finely milled powder is a highly acidic cation exchanger. Alkaline fillers may by catalytic action shorten the application time of solvent-free 2K-PU Desmophen® / Desmodur® systems. This product can be added as cation exchanger in order to counteract this. General lengthening of the application time through addition of Regulator ZL is not possible, however. view less | |
| Sacryl 678 | Yantai Suny Chem International Co., Ltd. | Sacryl 678 is an acrylic resin, mainly used for water-base ink and overprinting varnish, synthetic emulsion. It can also be used as a dispersing agent for paint pigment, printing color paste, adhesive,etc. |
