| Advantage™ AM1512 Defoamer | Ashland | Advantage™ AM1512 defoamer is a very high efficiency, hydrocarbon oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of ...view more Advantage™ AM1512 defoamer is a very high efficiency, hydrocarbon oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it effective in the presence of many surfactants. Advantage™ AM1512 defoamer is readily dispersible and has very good long-term persistency. view less | |
| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...view more Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. view less | |
| Advantage™ AM357 Defoamer | Ashland | Advantage™ AM357 defoamer is a high efficiency, hydrocarbon oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the pa...view more Advantage™ AM357 defoamer is a high efficiency, hydrocarbon oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. It effectively controls foaming in vinyl-acrylic, acrylic, styrene-acrylic, vinyl acetate ethylene, and vinyl acetate type paints. Advantage™ AM357 defoamer is readily dispersible, has very good long-term persistency, and is recommended for controlling entrained air and surface foam in production and/or application of architectural paints, emulsions plasters, industrial and wood coatings, aqueous adhesives, and water based printing printing inks. view less | |
| Advantage™ AM831 Defoamer | Ashland | Advantage™ AM831 defoamer is a high efficiency, hydrocarbon oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the pa...view more Advantage™ AM831 defoamer is a high efficiency, hydrocarbon oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, aqueous adhesives, as well as industrial and wood coatings. view less | |
| Advantage™ AV1424 Defoamer | Ashland | Advantage™ AV1424 defoamer is a high efficiency, vegetable oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the pai...view more Advantage™ AV1424 defoamer is a high efficiency, vegetable oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. It effectively controls foaming in vinyl-acrylic, acrylic, styrene-acrylic, vinyl acetate ethylene, and vinyl acetate type paints. Advantage™ AV1424 defoamer is readily dispersible, has very good long-term persistency, and is recommended for architectural paints, emulsions plasters, aqueous adhesives, water-based printing inks, as well as industrial and wood coatings. view less | |
| Advantage™ AV1425 Defoamer | Ashland | Advantage™ AV1425 defoamer is a high efficiency, vegetable oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the pai...view more Advantage™ AV1425 defoamer is a high efficiency, vegetable oil-based anti-foaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. It effectively controls foaming in vinyl-acrylic, acrylic, styrene-acrylic, vinyl acetate ethylene, and vinyl acetate type paints. Advantage™ AV1425 defoamer is readily dispersible, has very good long-term persistency, and is recommended for architectural paints, emulsions plasters, aqueous adhesives, as well as industrial and wood coatings. view less | |
| Advantage™ AW8176 Defoamer | Ashland | Advantage™ AW8176 defoamer is a water based emulsion antifoam agent. It is an APEO-free version of Advantage™ AW8171. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packagi...view more Advantage™ AW8176 defoamer is a water based emulsion antifoam agent. It is an APEO-free version of Advantage™ AW8171. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, aqueous adhesives, as well as industrial and wood coatings. view less | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-310 | Ashland | Aquaflow™ NHS-310 is a nonionic associative polymer that provides superior flow and leveling and high ICI viscosity in waterborne paints and coatings. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...view more Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH view less | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...view more Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. view less | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...view more Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. view less | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...view more Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. view less | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ XLS-535 | Ashland | Aquaflow™ XLS-535 rheology modifier is a solvent-free and APEO-free nonionic synthetic associative thickener (NSAT) designed for use in waterborne paints and coatings. When optimized in conjunction with an ICI builder, it imparts superior application prop...view more Aquaflow™ XLS-535 rheology modifier is a solvent-free and APEO-free nonionic synthetic associative thickener (NSAT) designed for use in waterborne paints and coatings. When optimized in conjunction with an ICI builder, it imparts superior application properties including excellent applied hiding resulting from optimized sag/leveling balance. Paints formulated with Aquaflow™ XLS-535 demonstrate good roller transfer and coverage, resulting in a virtually drip-free application and can deliver improvement in gloss and substrate wetting. view less | |
| Aquaflow™ XLS-550 | Ashland | Aquaflow™ XLS-550 is a nonionic synthetic associative rheology modifier for water-based paints and coatings. It is particularly suited for the application in alkyd emulsion based paints, providing the highest level of flow and leveling combined with an ex...view more Aquaflow™ XLS-550 is a nonionic synthetic associative rheology modifier for water-based paints and coatings. It is particularly suited for the application in alkyd emulsion based paints, providing the highest level of flow and leveling combined with an excellent gloss development. It can be combined in paint formulations with other low shear effective thickeners as well as high shear effective thickeners to further tailor and optimize the rheology profile of the final paint. view less | |
| CAVASOL® W7 M TL | Wacker Chemical Corporation | CAVASOL® W7 M TL is a 50% aqueous solution of standard grade methyl-beta-cyclodextrin from Wacker Chemie AG. CAVASOL® W7 M TL is the lowest cost version of this highly solublebeta-cyclodextrin derivative. It is the most efficient solubilizing agent useful...view more CAVASOL® W7 M TL is a 50% aqueous solution of standard grade methyl-beta-cyclodextrin from Wacker Chemie AG. CAVASOL® W7 M TL is the lowest cost version of this highly solublebeta-cyclodextrin derivative. It is the most efficient solubilizing agent useful when high solubility is needed. It is applied in biocides and coatings. view less | Request Sample |
| Dextrol™ OC-1025 | Ashland | Dextrol™ OC-1025 is ammonium hydroxide salt neutralized gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-1525 | Ashland | Dextrol™ OC-1525 is ammonium hydroxide salt neutralized gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...view more Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. view less | |
| Dextrol™ OC-20 Phosphate Ester Surfactant | Ashland | Dextrol™ OC-20 surfactant is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol™...view more Dextrol™ OC-20 surfactant is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol™ OC-20 can be neutralized by the user to any degree using a number of organic or inorganic bases. It is effective in the production of all common latex types including vinyl, vinyl acrylic, vinyl acetate ethylene, acrylic and styrene acrylic. It can also impart improved gloss and color acceptance to waterborne latex paints formulated with these resins. view less | |
| Dextrol™ OC-22 | Ashland | Dextrol™ OC-22 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-40 | Ashland | Dextrol™ OC-40 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-4025 | Ashland | Dextrol™ OC-4025 is ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-45N | Ashland | Dextrol™ OC-45N is sodium salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-5075 Phosphate Ester Surfactant | Ashland | Dextrol™ OC-5075 surfactant is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product ...view more Dextrol™ OC-5075 surfactant is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-5075 provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance for water-based paints. view less | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-78N Phosphate Ester Surfactant | Ashland | Dextrol™ OC-78N surfactant is the neutralized (sodium salt) form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and can provide the finished latex with low coagulum and improved handling and sto...view more Dextrol™ OC-78N surfactant is the neutralized (sodium salt) form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and can provide the finished latex with low coagulum and improved handling and storage stability. Dextrol™ OC-78N can also impart improved gloss and color acceptance in waterborne latex paints. view less | |
| Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...view more Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. view less | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...view more Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. view less | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...view more Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. view less | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...view more Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. view less | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...view more Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. view less | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a h...view more Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a highly efficient foam control agent with fast performance, excellent persistency and compatibility. view less | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persist...view more Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air-release agent, it is particularly effective on microfoam in spray-applied coatings. view less | |
| Drewplus™ T-4202 Foam Control Agent | Ashland | Drewplus™ T-4202 is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...view more Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...view more Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. view less | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...view more Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. view less | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...view more Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. view less | |
| Drewplus™ Y-250 Foam Control Agent | Ashland | Drewplus™ Y-250 foam control agent is a formulated blend of mineral oils, silica derivatives and nonionic esters. Drewplus™ Y-250 foam control agent is designed for aqueous foaming industrial systems that require quick foam knockdown and long-lasting f...view more Drewplus™ Y-250 foam control agent is a formulated blend of mineral oils, silica derivatives and nonionic esters. Drewplus™ Y-250 foam control agent is designed for aqueous foaming industrial systems that require quick foam knockdown and long-lasting foam prevention. This general purpose foam control agent is highly effective in the manufacture of synthetic latex, adhesives, latex-based coatings, cutting oils, etc. view less | |
| Flexidone™ 100 | Ashland | Flexidone™ is N-Octyl-2-Pyrrolidone. It excels as an additive, particularly in highly filled applications where even modest addition rates deliver significant gains in quality, performance and processing efficiencies. | |
| Flexidone™ 300 | Ashland | Flexidone™ 300 is N-Dodecyl-2-Pyrrolidone. Flexidone™ 300 balances critical performance characteristics, making it suitable for a broad range of applications. Flexidone 300 provides custom performance characteristics with 30–40% less plasticizer, all whil...view more Flexidone™ 300 is N-Dodecyl-2-Pyrrolidone. Flexidone™ 300 balances critical performance characteristics, making it suitable for a broad range of applications. Flexidone 300 provides custom performance characteristics with 30–40% less plasticizer, all while lowering processing temperatures significantly. view less | |
| Gantrez™ AN-119 | Ashland | Gantrez™ AN-119 is a copolymer of methyl vinyl ether/maleic anhydride. product attributes are physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 15(5%)/35(10%), nominal Molecular Weight 2.0x105, Tg Deg C 152, and specifi...view more Gantrez™ AN-119 is a copolymer of methyl vinyl ether/maleic anhydride. product attributes are physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 15(5%)/35(10%), nominal Molecular Weight 2.0x105, Tg Deg C 152, and specific gravity 22-25 Deg C 1.018(5%). view less | |
| Gantrez™ AN-139 | Ashland | Gantrez™ AN-139 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 40(5%)/145(10%), nominal molecular weight 1.0x106, Tg Deg C 151, specif...view more Gantrez™ AN-139 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 40(5%)/145(10%), nominal molecular weight 1.0x106, Tg Deg C 151, specific gravity 22-25 Deg C 1.016(5%). view less | |
| Gantrez™ AN-149 | Ashland | Gantrez™ AN-149 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 45(5%), nominal molecular weight 1.25x106, Tg Deg C 153, specific gravi...view more Gantrez™ AN-149 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 45(5%), nominal molecular weight 1.25x106, Tg Deg C 153, specific gravity 22-25 Deg C 1.017(5%), and acid #=695. view less | |
| Gantrez™ AN-169 | Ashland | Gantrez™ AN-169 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 85(5%), nominal molecular weight 1.98x106, Tg Deg C 154, specific gravi...view more Gantrez™ AN-169 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 85(5%), nominal molecular weight 1.98x106, Tg Deg C 154, specific gravity 22-25 Deg C 1.017(5%), and acid #=695. view less | |
| GENIOSIL® GF 31 | Wacker Chemical Corporation | GENIOSIL® GF 31 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...view more GENIOSIL® GF 31 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. As a bifunctional, organically unsaturated molecule, GENIOSIL® GF 31 can be incorporated into organic polymers, e.g. via radical grafting. It can be applied in coatings, emulsion paints and filler treatments. view less | Request Sample |
| GENIOSIL® GF 56 | Wacker Chemical Corporation | GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesiv...view more GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesives, emulsion paint, coatings and plastics crosslinking. view less | Request Sample |
| GENIOSIL® GF 82 | Wacker Chemical Corporation | GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion p...view more GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion paint and coatings. view less | Request Sample |
| GENIOSIL® GF 93 | Wacker Chemical Corporation | GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in th...view more GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in the presence of moisture (Ethanol is released) to form silanols, which can subsequently react with themselves to produce siloxanes or can bind to inorganic substrates. It is applied in adhesives, emulsion paint, coatings, filler treatment. view less | Request Sample |
| GENIOSIL® XL 10 | Wacker Chemical Corporation | GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It ca...view more GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, all-purpose adhesives, assembly adhesives, coatings, construction adhesives, emulsion paint, industrial adhesives, parquet adhesives and plastics crosslinking. view less | Request Sample |
| GENIOSIL® XL 12 | Wacker Chemical Corporation | GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIO...view more GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIOSIL® XL 12 is an unsaturated organic compound and can be incorporated into organic polymers by radical grafting or co-polymerization. It can be applied in adhesives, emulsion paint, coatings and plastics crosslinking. view less | Request Sample |
| GENIOSIL® XL 33 | Wacker Chemical Corporation | GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...view more GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, emulsion paints and coatings. view less | Request Sample |
| HDK® H13L | Wacker Chemical Corporation | HDK® H13L is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is mainly used in polar systems. Due to its strong hydrophobicity HDK® H13L is well suited for solventfree systems, for high solids and for waterborne coatings. It ...view more HDK® H13L is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is mainly used in polar systems. Due to its strong hydrophobicity HDK® H13L is well suited for solventfree systems, for high solids and for waterborne coatings. It can be applied in adhesives, coatings, metal coatings, protective coatings, surface coatings for plastics, hand lay up technique and spray up technique. view less | Request Sample |
| HDK® H15 | Wacker Chemical Corporation | HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the ...view more HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the production of technical powders. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| HDK® H20 | Wacker Chemical Corporation | HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be appl...view more HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be applied in adhesives, coatings, printing inks, skin care, decorative cosmetics and more. view less | Request Sample |
| HDK® H2000 | Wacker Chemical Corporation | HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is use...view more HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents. view less | Request Sample |
| HDK® H30 | Wacker Chemical Corporation | HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the ...view more HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the production of powder coatings and can be applied in automotive refinishes, coatings, flexographic printing, metal coatings, printing inks and reinforcement of mechanical properties. view less | Request Sample |
| HDK® N20 | Wacker Chemical Corporation | HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is app...view more HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| HDK® N20D | Wacker Chemical Corporation | HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such...view more HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such as adhesives, adsorption agents, decorative cosmetics, inkjet, coatings and wind power. view less | Request Sample |
| HDK® T30 | Wacker Chemical Corporation | HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, pr...view more HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. view less | Request Sample |
| HDK® T40 | Wacker Chemical Corporation | HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickenin...view more HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. view less | Request Sample |
| Jaypol™ A40 | Ashland | Jaypol™ A40 is a low viscosity dispersing agent for water-borne paints and coating systems. It offers versatility in PVC range and resin chemistry. It can be used as supplied. Use of Jaypol™ A40 should be limited to pH 5 - 10.5 and temperatures lower than...view more Jaypol™ A40 is a low viscosity dispersing agent for water-borne paints and coating systems. It offers versatility in PVC range and resin chemistry. It can be used as supplied. Use of Jaypol™ A40 should be limited to pH 5 - 10.5 and temperatures lower than 700° C. It can provide improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures of pH changes. view less | |
| Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...view more Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. view less | |
| Jaypol™ S40 | Ashland | Jaypol™ S40 is a highly effective dispersing agent for water-borne paints and coating systems. The product is especially suited for the high PVC dispersion of inorganic pigments. It is suitable for dispersing inorganic pigments and fillers such as TiO2, c...view more Jaypol™ S40 is a highly effective dispersing agent for water-borne paints and coating systems. The product is especially suited for the high PVC dispersion of inorganic pigments. It is suitable for dispersing inorganic pigments and fillers such as TiO2, calcium carbonate, kaolin/china clay, dolomite and other inorganic pigment types that are commonly used in paint and coatings applications. view less | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product i...view more Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product is used as a thickener, protective colloid, binder, stabilizer, and suspending agent, particularly in applications where a nonionic material is desired. view less | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ Performax has been the leading thickener for waterborne architectural coatings for more than 50 years. And now Natrosol™ Performax takes paint manufacturing to unprescedented levels of process flexibility and product quality by allowing the pain...view more Natrosol™ Performax has been the leading thickener for waterborne architectural coatings for more than 50 years. And now Natrosol™ Performax takes paint manufacturing to unprescedented levels of process flexibility and product quality by allowing the paint manufacturer to add HEC in a dry form at any point of the paint production process without lumping. view less | |
| Natrosol™ Plus | Ashland | Natrosol™ Plus is a associative cellulosic polymer designed specifically for use in latex paints. | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...view more Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. view less | |
| PVP K-120 | Ashland | PVP K-120 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. Applications include use as a metal quenchant bath. | |
| PVP K-15 | Ashland | PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-30 | Ashland | PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-60 | Ashland | PVP K-60 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. | |
| PVP K-90 | Ashland | PVP K-90 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-90 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| Rapi-Cure™ DVB1D | Ashland | Rapi-Cure™ DVB1D is a butanediol divinyl ether. Applications include reactive diluents for cationic, charge transfer and free radical radiation curable coatings, co-monomers in specialty coating manufacture, effective in generating low surface energy rele...view more Rapi-Cure™ DVB1D is a butanediol divinyl ether. Applications include reactive diluents for cationic, charge transfer and free radical radiation curable coatings, co-monomers in specialty coating manufacture, effective in generating low surface energy release coatings, monomers for tackifying adhesives with varying properties. view less | |
| Rapi-Cure™ DVE-3 | Ashland | Rapi-Cure™ DVE-3 is a triethyleneglycol divinyl ether. Product attributes are physical state as supplied clear liquid, CAS No 765-12-8, viscosity cps at 25 Deg C 2.6, nominal molecular weight 202, BP Deg C 123 @18 mm, MP/FP or PP Deg C -7, flash Pt Deg C...view more Rapi-Cure™ DVE-3 is a triethyleneglycol divinyl ether. Product attributes are physical state as supplied clear liquid, CAS No 765-12-8, viscosity cps at 25 Deg C 2.6, nominal molecular weight 202, BP Deg C 123 @18 mm, MP/FP or PP Deg C -7, flash Pt Deg C 119, specific gravity 22-25 Deg C 1.001. view less | |
| Rapi-Cure™ HBVE | Ashland | Rapi-Cure™ HBVE is a Hydroxybutyl vinyl ether. Stabilized with 0.01% KOH. Product attributes include physical state as supplied clear liquid, CAS No 17832-28-9, viscosity cps at 25 Deg C 5.4, nominal molecular weight 116, BP Deg C 95 @20, MP/FP or PP Deg ...view more Rapi-Cure™ HBVE is a Hydroxybutyl vinyl ether. Stabilized with 0.01% KOH. Product attributes include physical state as supplied clear liquid, CAS No 17832-28-9, viscosity cps at 25 Deg C 5.4, nominal molecular weight 116, BP Deg C 95 @20, MP/FP or PP Deg C -39, flash pt deg C 82, specific gravity 22-25 Deg C 0.939. view less | |
| SILRES® 601 | Wacker Chemical Corporation | SILRES® 601 is a flaked silicone resin containing phenyl groups and exhibiting good compatibility with organic resins. It can be used for base material for heat resistant powder coatings. SILRES® 601 is normally blended with standard organic powder-coatin...view more SILRES® 601 is a flaked silicone resin containing phenyl groups and exhibiting good compatibility with organic resins. It can be used for base material for heat resistant powder coatings. SILRES® 601 is normally blended with standard organic powder-coating resins in a ratio of 1:1 to 2:1. Generally, incompatibilities are not expected. It can be applied in coatings, heat-resistant coatings, metal coatings and powder coatings. view less | Request Sample |
| SILRES® 603 | Wacker Chemical Corporation | SILRES® 603 is a solid silicone resin containing phenyl groups and exhibiting good compatibility with organic polymers. It is used as base material for heat resistant powder coatings with above average gloss retention during heating. For heat resistant an...view more SILRES® 603 is a solid silicone resin containing phenyl groups and exhibiting good compatibility with organic polymers. It is used as base material for heat resistant powder coatings with above average gloss retention during heating. For heat resistant and black pigmented powder coatings it is advisable to blend SILRES® 603 with orgnic binders for powder coatings and to add heat resistant pigments. SILRES® 603 is applied in applications such as coatings, metal coatings, heat-resistant coatings, powder coatings view less | Request Sample |
| SILRES® 604 | Wacker Chemical Corporation | SILRES® 604 is a flaked silicone resin with good compatibility with organic resins, is suited as a pure binder and supplied as a solvent-free solid resin. It's used as a base material for powder coatings and can be heat resistant up to 650 °C. SILRES® 604...view more SILRES® 604 is a flaked silicone resin with good compatibility with organic resins, is suited as a pure binder and supplied as a solvent-free solid resin. It's used as a base material for powder coatings and can be heat resistant up to 650 °C. SILRES® 604 is applied to many different coatings such as heat-resistant coating, metal coatings and powder coatings. view less | Request Sample |
| SILRES® 605 | Wacker Chemical Corporation | SILRES® 605 is a flaked silicone resin with good compatibility with organic resins. It is suited as a pure binder and is supplied as a solvent-free solid resin. SILRES® 605 can be used for base material for powder coatings and is heat resistant up to 550 ...view more SILRES® 605 is a flaked silicone resin with good compatibility with organic resins. It is suited as a pure binder and is supplied as a solvent-free solid resin. SILRES® 605 can be used for base material for powder coatings and is heat resistant up to 550 °C. It can be applied to coatings, metal coatings, and heat-resistant coatings. view less | Request Sample |
| SILRES® 610 | Wacker Chemical Corporation | SILRES® 610 is a solid, methyl group containing silicone resin. It's typically used in heat resistant coatings. SILRES® 610 combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) ca...view more SILRES® 610 is a solid, methyl group containing silicone resin. It's typically used in heat resistant coatings. SILRES® 610 combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) can be achieved in combination with suitable temperature stable pigments and fillers. The applications applied are coatings, coatings for cookware and metal coatings. view less | Request Sample |
