UL Prospector
Prospector

Success!

Successfully saved your search
130 Results
CAVASOL® W7 M TL Wacker Chemical Corporation CAVASOL® W7 M TL is a 50% aqueous solution of standard grade methyl-beta-cyclodextrin from Wacker Chemie AG. CAVASOL® W7 M TL is the lowest cost version of this highly solublebeta-cyclodextrin derivative. It is the most efficient solubilizing agent useful...view more CAVASOL® W7 M TL is a 50% aqueous solution of standard grade methyl-beta-cyclodextrin from Wacker Chemie AG. CAVASOL® W7 M TL is the lowest cost version of this highly solublebeta-cyclodextrin derivative. It is the most efficient solubilizing agent useful when high solubility is needed. It is applied in biocides and coatings. view less Request Sample
DYHARD® 100 AlzChem AG DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...view more DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® 100M AlzChem AG DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...view more DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® 100S AlzChem AG DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...view more DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® 100SF AlzChem AG DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® 100SH AlzChem AG DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® A5M30 AlzChem AG DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions
DYHARD® CAAB AlzChem AG DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...view more DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. view less
DYHARD® D50EP AlzChem AG DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...view more DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. view less
DYHARD® DF50EP AlzChem AG DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations
DYHARD® Fluid 111 AlzChem AG DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations.
DYHARD® Fluid 151 AlzChem AG DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® Fluid 212 AlzChem AG DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications.
DYHARD® Fluid AC11 AlzChem AG DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® MCA10 AlzChem AG DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature.
DYHARD® MCA30 AlzChem AG DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings.
DYHARD® MI-C AlzChem AG DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements.
DYHARD® MI-FF AlzChem AG DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements.
DYHARD® MIA5 AlzChem AG DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less
DYHARD® OTB AlzChem AG DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided.
DYHARD® PI AlzChem AG DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed.
DYHARD® PI-FF AlzChem AG DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed.
DYHARD® PIN AlzChem AG DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability.
DYHARD® PMC AlzChem AG DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided.
DYHARD® RF1000 AlzChem AG DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® RF2100 AlzChem AG DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications.
DYHARD® UR200 AlzChem AG DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® UR300 AlzChem AG DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® UR300AB AlzChem AG DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® UR400 AlzChem AG DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...view more DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
DYHARD® UR500 AlzChem AG DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
DYHARD® UR700 AlzChem AG DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...view more DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. view less
DYHARD® UR800 AlzChem AG DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® URAcc13 AlzChem AG DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
DYHARD® URAcc57 AlzChem AG DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
GENIOSIL® GF 31 Wacker Chemical Corporation GENIOSIL® GF 31 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...view more GENIOSIL® GF 31 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. As a bifunctional, organically unsaturated molecule, GENIOSIL® GF 31 can be incorporated into organic polymers, e.g. via radical grafting. It can be applied in coatings, emulsion paints and filler treatments. view less Request Sample
GENIOSIL® GF 56 Wacker Chemical Corporation GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesiv...view more GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesives, emulsion paint, coatings and plastics crosslinking. view less Request Sample
GENIOSIL® GF 82 Wacker Chemical Corporation GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion p...view more GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion paint and coatings. view less Request Sample
GENIOSIL® GF 93 Wacker Chemical Corporation GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in th...view more GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in the presence of moisture (Ethanol is released) to form silanols, which can subsequently react with themselves to produce siloxanes or can bind to inorganic substrates. It is applied in adhesives, emulsion paint, coatings, filler treatment. view less Request Sample
GENIOSIL® XL 10 Wacker Chemical Corporation GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It ca...view more GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, all-purpose adhesives, assembly adhesives, coatings, construction adhesives, emulsion paint, industrial adhesives, parquet adhesives and plastics crosslinking. view less Request Sample
GENIOSIL® XL 12 Wacker Chemical Corporation GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIO...view more GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIOSIL® XL 12 is an unsaturated organic compound and can be incorporated into organic polymers by radical grafting or co-polymerization. It can be applied in adhesives, emulsion paint, coatings and plastics crosslinking. view less Request Sample
GENIOSIL® XL 33 Wacker Chemical Corporation GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...view more GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, emulsion paints and coatings. view less Request Sample
HDK® H13L Wacker Chemical Corporation HDK® H13L is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is mainly used in polar systems. Due to its strong hydrophobicity HDK® H13L is well suited for solventfree systems, for high solids and for waterborne coatings. It ...view more HDK® H13L is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is mainly used in polar systems. Due to its strong hydrophobicity HDK® H13L is well suited for solventfree systems, for high solids and for waterborne coatings. It can be applied in adhesives, coatings, metal coatings, protective coatings, surface coatings for plastics, hand lay up technique and spray up technique. view less Request Sample
HDK® H15 Wacker Chemical Corporation HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the ...view more HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the production of technical powders. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. view less Request Sample
HDK® H20 Wacker Chemical Corporation HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be appl...view more HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be applied in adhesives, coatings, printing inks, skin care, decorative cosmetics and more. view less Request Sample
HDK® H2000 Wacker Chemical Corporation HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is use...view more HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents. view less Request Sample
HDK® H30 Wacker Chemical Corporation HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the ...view more HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the production of powder coatings and can be applied in automotive refinishes, coatings, flexographic printing, metal coatings, printing inks and reinforcement of mechanical properties. view less Request Sample
HDK® N20 Wacker Chemical Corporation HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is app...view more HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. view less Request Sample
HDK® N20D Wacker Chemical Corporation HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such...view more HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such as adhesives, adsorption agents, decorative cosmetics, inkjet, coatings and wind power. view less Request Sample
HDK® T30 Wacker Chemical Corporation HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, pr...view more HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. view less Request Sample
HDK® T40 Wacker Chemical Corporation HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickenin...view more HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. view less Request Sample
SILRES® 601 Wacker Chemical Corporation SILRES® 601 is a flaked silicone resin containing phenyl groups and exhibiting good compatibility with organic resins. It can be used for base material for heat resistant powder coatings. SILRES® 601 is normally blended with standard organic powder-coatin...view more SILRES® 601 is a flaked silicone resin containing phenyl groups and exhibiting good compatibility with organic resins. It can be used for base material for heat resistant powder coatings. SILRES® 601 is normally blended with standard organic powder-coating resins in a ratio of 1:1 to 2:1. Generally, incompatibilities are not expected. It can be applied in coatings, heat-resistant coatings, metal coatings and powder coatings. view less Request Sample
SILRES® 603 Wacker Chemical Corporation SILRES® 603 is a solid silicone resin containing phenyl groups and exhibiting good compatibility with organic polymers. It is used as base material for heat resistant powder coatings with above average gloss retention during heating. For heat resistant an...view more SILRES® 603 is a solid silicone resin containing phenyl groups and exhibiting good compatibility with organic polymers. It is used as base material for heat resistant powder coatings with above average gloss retention during heating. For heat resistant and black pigmented powder coatings it is advisable to blend SILRES® 603 with orgnic binders for powder coatings and to add heat resistant pigments. SILRES® 603 is applied in applications such as coatings, metal coatings, heat-resistant coatings, powder coatings view less Request Sample
SILRES® 604 Wacker Chemical Corporation SILRES® 604 is a flaked silicone resin with good compatibility with organic resins, is suited as a pure binder and supplied as a solvent-free solid resin. It's used as a base material for powder coatings and can be heat resistant up to 650 °C. SILRES® 604...view more SILRES® 604 is a flaked silicone resin with good compatibility with organic resins, is suited as a pure binder and supplied as a solvent-free solid resin. It's used as a base material for powder coatings and can be heat resistant up to 650 °C. SILRES® 604 is applied to many different coatings such as heat-resistant coating, metal coatings and powder coatings. view less Request Sample
SILRES® 605 Wacker Chemical Corporation SILRES® 605 is a flaked silicone resin with good compatibility with organic resins. It is suited as a pure binder and is supplied as a solvent-free solid resin. SILRES® 605 can be used for base material for powder coatings and is heat resistant up to 550 ...view more SILRES® 605 is a flaked silicone resin with good compatibility with organic resins. It is suited as a pure binder and is supplied as a solvent-free solid resin. SILRES® 605 can be used for base material for powder coatings and is heat resistant up to 550 °C. It can be applied to coatings, metal coatings, and heat-resistant coatings. view less Request Sample
SILRES® 610 Wacker Chemical Corporation SILRES® 610 is a solid, methyl group containing silicone resin. It's typically used in heat resistant coatings. SILRES® 610 combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) ca...view more SILRES® 610 is a solid, methyl group containing silicone resin. It's typically used in heat resistant coatings. SILRES® 610 combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) can be achieved in combination with suitable temperature stable pigments and fillers. The applications applied are coatings, coatings for cookware and metal coatings. view less Request Sample
SILRES® BS 1001 Wacker Chemical Corporation SILRES® BS 1001 is a water-thinnable, solventless emulsion, based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high quality general-purpose water repellents for impregnating and priming mineral surfaces. It can be ap...view more SILRES® BS 1001 is a water-thinnable, solventless emulsion, based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high quality general-purpose water repellents for impregnating and priming mineral surfaces. It can be applied in coatings, facade coatings, impregnation of facades, silicate emulsion paints and silicone resin emulsion paints. view less Request Sample
SILRES® BS 1306 Wacker Chemical Corporation SILRES® BS 1306 is a solventless water-thinnable emulsion of a polysiloxane modified with functional silicone resin. It is an additive used in the manufacture of aqueous masonry coatings and aqueous primers to enhance water repellency, water resistance an...view more SILRES® BS 1306 is a solventless water-thinnable emulsion of a polysiloxane modified with functional silicone resin. It is an additive used in the manufacture of aqueous masonry coatings and aqueous primers to enhance water repellency, water resistance and water-vapour permeability. It also improves the processability and antiblock characteristics of the aqueous coatings. It is applied in coatings, facade coatings, plasters, silicate, silicate emulsion paints and silicone resin emulsion paints. view less Request Sample
SILRES® BS 290 Wacker Chemical Corporation SILRES® BS 290 is a solvent less silicone concentrate that is based on a mixture of silane and siloxane and is dilutable with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents serve as high-quality general-purpose water repellents f...view more SILRES® BS 290 is a solvent less silicone concentrate that is based on a mixture of silane and siloxane and is dilutable with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates. SILRES® BS 290 is suitable for imparting water repellency to absorbent, porous and mineral construction materials and is applied in coatings, facade coatings, impregnation of facades, silicate emulsion paints and silicone resin emulsion paints. view less Request Sample
SILRES® BS 43 N Wacker Chemical Corporation SILRES® BS 43 N is a water-dilutable silicone resin emulsion used as a binder in the production of silicone resin emulsion paints and silicone resin plasters. It is the main binder employed in silicone resin emulsion paints and silicone resin plasters. ...view more SILRES® BS 43 N is a water-dilutable silicone resin emulsion used as a binder in the production of silicone resin emulsion paints and silicone resin plasters. It is the main binder employed in silicone resin emulsion paints and silicone resin plasters. If formulated properly the products made with it are characterized by high permeability to water vapour and CO2, low water absorption coefficients, low soiling tendency, a mineral appearance and long life. It can be applied in plasters, silicone resins and silicone resin emulsion paints. view less Request Sample
SILRES® BS 45 Wacker Chemical Corporation SILRES® BS 45 is a water-dilutable solvent less emulsion of a silicone resin used as a binder in the production of silicone resin emulsion paints and plasters. It is employed as the main binder in silicone resin emulsion paints and plaster. If formulated ...view more SILRES® BS 45 is a water-dilutable solvent less emulsion of a silicone resin used as a binder in the production of silicone resin emulsion paints and plasters. It is employed as the main binder in silicone resin emulsion paints and plaster. If formulated properly, the products made with it are characterized by high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral appearance and long life. The applications applied are coatings, facade coatings, plasters, silicone resin and silicone resin emulsion paints. view less Request Sample
SILRES® BS 50 Wacker Chemical Corporation SILRES® BS 50 is a solvent free water-thinnable emulsion of a specialsilicone resin / polydimethylsiloxane blend. It is used as a water-repellent additive for silicate emulsion paints and whitewashes. By adding the water repellent, hydrophobic paints are ...view more SILRES® BS 50 is a solvent free water-thinnable emulsion of a specialsilicone resin / polydimethylsiloxane blend. It is used as a water-repellent additive for silicate emulsion paints and whitewashes. By adding the water repellent, hydrophobic paints are obtained and the pigments are prevented from washing out, i. e. fading of the coatings is prevented. The durability of the paint is significantly increased. SILRES® BS 50 can be applied in coatings, facade coatings, plasters, silicate and silicate emulsion paints. view less Request Sample
SILRES® BS 54 Wacker Chemical Corporation SILRES® BS 54 is a water-dilutable, solvent less emulsion of a silicone resin used as a binder in the production of silicone resin emulsion paints and plasters. It is employed as binder in silicone resin emulsion paints and renders. If formulated properly...view more SILRES® BS 54 is a water-dilutable, solvent less emulsion of a silicone resin used as a binder in the production of silicone resin emulsion paints and plasters. It is employed as binder in silicone resin emulsion paints and renders. If formulated properly, the products made with it are characterized by high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral appearance and long life. Coatings, facade coatings, plasters, silicone resins and silicone resin emulsion paints are some of the applications that it can be applied in. view less Request Sample
SILRES® BS POWDER A Wacker Chemical Corporation SILRES® BS POWDER A is a highly efficient silicone water-repellent additive in powder form. It is a high-quality specialty product for enhancing the water repellency and water resistance of cementitious construction material mixes, e.g. premixed plasters,...view more SILRES® BS POWDER A is a highly efficient silicone water-repellent additive in powder form. It is a high-quality specialty product for enhancing the water repellency and water resistance of cementitious construction material mixes, e.g. premixed plasters, joint mortars and powder paints. It can be used in both dry powder and liquid systems. Therefore, it can also be used for manufacturing earth-moist or slurry-based products, like fibre cement or calcium silicate boards, non load-bearing concrete products as well as aerated concrete parts. It is applied in coatings, facade coatings and mineral plasters. view less Request Sample
SILRES® BS SMK 2100 Wacker Chemical Corporation SILRES® BS SMK 2100 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield microemulsions. It's a top quality primer for exterior coatings containing wetting agents for use on porous, mineral...view more SILRES® BS SMK 2100 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield microemulsions. It's a top quality primer for exterior coatings containing wetting agents for use on porous, mineral substrates. The suitability of the product for use with a particular coating must be treated in each case. It can be applied in coatings, facade coatings, silicate emulsion paints and silicone resin emulsion paints. view less Request Sample
SILRES® HK 46 Wacker Chemical Corporation SILRES® HK 46 is a methyl group containing silicone resin solution in xylene/n-butanol 4:1. It's typically used in heat resistant coatings and combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up t...view more SILRES® HK 46 is a methyl group containing silicone resin solution in xylene/n-butanol 4:1. It's typically used in heat resistant coatings and combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) can be achieved in combination with suitable temperature stable pigments and fillers. It can be applied in baking molds, baking tray coatings, coatings, heat-resistant coatings and metal coatings. view less Request Sample
SILRES® HP 2000 Wacker Chemical Corporation SILRES® HP 2000 is an aminofunctional, methyl phenyl silicone resin solution. It's extraordinarily weathering resistant and has outstanding gloss retention and low yellowing. SILRES® HP 2000 used as a high performance hardener for organic epoxy resins in ...view more SILRES® HP 2000 is an aminofunctional, methyl phenyl silicone resin solution. It's extraordinarily weathering resistant and has outstanding gloss retention and low yellowing. SILRES® HP 2000 used as a high performance hardener for organic epoxy resins in high-solids coatings. It's applied in coatings, marine coatings, metal coatings and protective coatings. view less Request Sample
SILRES® IC 232 Wacker Chemical Corporation SILRES® IC 232 is a solventless, reactive, methoxyfunctional methyl-phenyl polysiloxane with a narrow molecular weight distribution. It's highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering ...view more SILRES® IC 232 is a solventless, reactive, methoxyfunctional methyl-phenyl polysiloxane with a narrow molecular weight distribution. It's highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering or heat resistance. It can be used in different coatings, such as coil coatings, metal coatings and coatings for cookware. view less Request Sample
SILRES® IC 368 Wacker Chemical Corporation SILRES® IC 368 is a solventless, reactive, methoxyfunctional methyl-phenyl polysiloxane with a narrow molecular weight distribution. It's highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering ...view more SILRES® IC 368 is a solventless, reactive, methoxyfunctional methyl-phenyl polysiloxane with a narrow molecular weight distribution. It's highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering or heat resistance. It may be applied in coil coatings and coatings for cookware. view less Request Sample
SILRES® IC 836 Wacker Chemical Corporation SILRES® IC 836 is a solid, silanol functional phenyl silicone resin recommended for the silicone modification of organic resins. It's highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering or h...view more SILRES® IC 836 is a solid, silanol functional phenyl silicone resin recommended for the silicone modification of organic resins. It's highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering or heat resistance. SILRES® IC 836 is applied in coatings such as, coil coatings, coatings for cookware, and metal coatings. view less Request Sample
SILRES® KX Wacker Chemical Corporation SILRES® KX is a methyl group containing silicone resin solution in xylene. It combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) can be achieved in combination with suitable tem...view more SILRES® KX is a methyl group containing silicone resin solution in xylene. It combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) can be achieved in combination with suitable temperature stable pigments and fillers. It's typically used in heat resistant coatings such as metal coatings. view less Request Sample
SILRES® MP 50 E Wacker Chemical Corporation SILRES® MP 50 E is a methyl phenyl group containing silicone resin emulsion. In combination with suitable temperature stable pigments, fillers and additional organic binders, SILRES® MP 50 E is the optimum binder for heat resistant water-borne paints. It ...view more SILRES® MP 50 E is a methyl phenyl group containing silicone resin emulsion. In combination with suitable temperature stable pigments, fillers and additional organic binders, SILRES® MP 50 E is the optimum binder for heat resistant water-borne paints. It can be used in coatings for cookware, metal coatings and heat-resistant coatings. view less Request Sample
SILRES® MSE 100 Wacker Chemical Corporation SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates and is a methoxyfunctional methyl polysiloxane. It is recommended as an ambient temperature moisture-curing binder for heat resistant paints. In combination with suit...view more SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates and is a methoxyfunctional methyl polysiloxane. It is recommended as an ambient temperature moisture-curing binder for heat resistant paints. In combination with suitable catalysts and temperature stable pigments and fillers, SILRES® MSE 100 is the optimum binder for ambient curing, heat resistant paints. It may be applied in heat-resistant coatings and metal coatings. view less Request Sample
SILRES® REN 50 Wacker Chemical Corporation SILRES® REN 50 is a methyl phenyl group containing silicone resin solution in xylene/n-butanol. It's typically used in heat resistant coatings like heat-resistant coatings and metal coatings. It combines outstanding heat resistance and weatherability. Wit...view more SILRES® REN 50 is a methyl phenyl group containing silicone resin solution in xylene/n-butanol. It's typically used in heat resistant coatings like heat-resistant coatings and metal coatings. It combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 650°C (1200°F) can be achieved in combination with suitable temperature stable pigments and fillers. view less Request Sample
SILRES® REN 60 Wacker Chemical Corporation SILRES® REN 60 is a methyl phenyl group containing silicone resin solution in xylene. It combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 650°C (1200°F) can be achieved in combination with s...view more SILRES® REN 60 is a methyl phenyl group containing silicone resin solution in xylene. It combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 650°C (1200°F) can be achieved in combination with suitable temperature stable pigments and fillers. It's typically applied in coatings such as metal coatings and heat-resistant coatings. view less Request Sample
SILRES® REN 80 Wacker Chemical Corporation SILRES® REN 80 is a methyl phenyl group containing silicone resin solution in xylene. It combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 650°C (1200°F) can be achieved in combination with s...view more SILRES® REN 80 is a methyl phenyl group containing silicone resin solution in xylene. It combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 650°C (1200°F) can be achieved in combination with suitable temperature stable pigments and fillers. It can be applied in metal coatings and heat-resistant coatings. view less Request Sample
SILRES® SY 231 Wacker Chemical Corporation SILRES® SY 231 is a solventless, liquid, reactive, methoxyfunctionalmethyl-phenyl polysiloxane with a narrow molecular weight distribution. It is highly suitable for introducing a compatible silicone component into other binder systems to increase the wea...view more SILRES® SY 231 is a solventless, liquid, reactive, methoxyfunctionalmethyl-phenyl polysiloxane with a narrow molecular weight distribution. It is highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering or heat resistance. It may be applied in coatings like coil coatings, metal coatings and coatings for cookware. view less Request Sample
SILRES® SY 300 Wacker Chemical Corporation SILRES® SY 300 is a reactive, silanol functional phenyl-propylpolysiloxane suitable as a solventless solid resin for the modification of organic resins. It is used for introducing a compatible silicone component into other binder systems to increase the w...view more SILRES® SY 300 is a reactive, silanol functional phenyl-propylpolysiloxane suitable as a solventless solid resin for the modification of organic resins. It is used for introducing a compatible silicone component into other binder systems to increase the weathering or heat resistance. SILRES® SY 300 is typically applied in metal coatings and coil coatings. view less Request Sample
SILRES® SY 409 Wacker Chemical Corporation SILRES® SY 409 is a methylphenyl group containing silicone resin solution that is recommended as a binder for medium solids or high solids heat resistant paints in combination with other organic resins. It is highly suitable for introducing a compatible s...view more SILRES® SY 409 is a methylphenyl group containing silicone resin solution that is recommended as a binder for medium solids or high solids heat resistant paints in combination with other organic resins. It is highly suitable for introducing a compatible silicone component into other binder systems to increase the weathering or heat resistance and is applied in heat-resistant coatings. view less Request Sample
SILZOT® FS-X1 AlzChem AG SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...view more SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. view less
Silzot® HQ plus (Powder) AlzChem AG Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen.
Silzot® HQ (Powder) AlzChem AG Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen.
SILZOT® RTP AlzChem AG SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives.
Silzot® SQ AlzChem AG Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen.
Silzot® TQ (Powder) AlzChem AG Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen.
VINNAPAS® 224 HD Wacker Chemical Corporation VINNAPAS® 224 HD is a fine-particle dispersion of a special styrene/acrylate copolymer. It has excellent pigment-binding capacity and very good adhesion to inorganic substrates. VINNAPAS® 224 HD is ideal for manufacturing construction and tile adhesive pa...view more VINNAPAS® 224 HD is a fine-particle dispersion of a special styrene/acrylate copolymer. It has excellent pigment-binding capacity and very good adhesion to inorganic substrates. VINNAPAS® 224 HD is ideal for manufacturing construction and tile adhesive paste with extremely good wet adhesion properties. It's used as a binder for roofing compounds, high-quality synthetic-resin and silicone-resin plasters, and as a primer for flooring compounds. Typically it's applied in plasters, silicone resins, tile adhesives and primers. view less Request Sample
VINNAPAS® AF 474 Wacker Chemical Corporation VINNAPAS® AF 474 is an aqueous dispersion of a hydroxy-functional acrylate copolymer. It adheres extremely well to metals and many polar plastics and forms a transparent coating at room temperature. The dispersion's thermoplastic properties make it heat s...view more VINNAPAS® AF 474 is an aqueous dispersion of a hydroxy-functional acrylate copolymer. It adheres extremely well to metals and many polar plastics and forms a transparent coating at room temperature. The dispersion's thermoplastic properties make it heat sealable. VINNAPAS AF 474 is used for coating plastics, for rendering films heat sealable and, preferably in combination with melamine resins, for producing heat seal-resistant coatings with good water resistance, especially on aluminum foil. view less Request Sample
VINNAPAS® B 100/20 VLE Wacker Chemical Corporation VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. It can be diluted with esters, ketones, aromatic solvents and chlorinated hydrocarbons although the solution's compatibility with alcohols...view more VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. It can be diluted with esters, ketones, aromatic solvents and chlorinated hydrocarbons although the solution's compatibility with alcohols is limited. Typical applications for VINNAPAS® B 100/20 VLE are construction adhesives, consumer adhesives, floor coatings, parquet adhesives and parquet flooring. view less Request Sample
VINNAPAS® B 1.5 SPECIAL Wacker Chemical Corporation VINNAPAS® B 1.5 SPECIAL is a food grade vinyl acetate homopolymer in solid form. The polymer is transparent, colorless, tasteless and thermoplastic odorless. VINNAPAS® B 1.5 SPECIAL is typically applied to gum base, adhesives, construction adhesives, floo...view more VINNAPAS® B 1.5 SPECIAL is a food grade vinyl acetate homopolymer in solid form. The polymer is transparent, colorless, tasteless and thermoplastic odorless. VINNAPAS® B 1.5 SPECIAL is typically applied to gum base, adhesives, construction adhesives, floor coatings, structural adhesives, parquet adhesives and industrial adhesives. view less Request Sample
VINNAPAS® B 30 SPECIAL Wacker Chemical Corporation VINNAPAS® B 30 SPECIAL is a food grade vinyl acetate homopolymer in solid form. The thermoplastic polymer is transparent, colorless, tasteless and odorless. It's typically applied in adhesives, all purpose adhesives, chewing-gum production, construction a...view more VINNAPAS® B 30 SPECIAL is a food grade vinyl acetate homopolymer in solid form. The thermoplastic polymer is transparent, colorless, tasteless and odorless. It's typically applied in adhesives, all purpose adhesives, chewing-gum production, construction adhesives, consumer adhesives, floor coatings, gum base, industrial adhesives and structural adhesives. view less Request Sample
VINNAPAS® B 5 SPECIAL Wacker Chemical Corporation VINNAPAS® B 5 SPECIAL is a transparent, colorless, tasteless and odorless thermoplastic polymer. It is used as a food grade vinyl acetate homopolymer in solid form. VINNAPAS® B 5 SPECIAL is typically applied in all-purpose adhesives, chewing-gum productio...view more VINNAPAS® B 5 SPECIAL is a transparent, colorless, tasteless and odorless thermoplastic polymer. It is used as a food grade vinyl acetate homopolymer in solid form. VINNAPAS® B 5 SPECIAL is typically applied in all-purpose adhesives, chewing-gum production, construction adhesives, consumer adhesives, floor coatings, industrial adhesives, parquet adhesives, parquet flooring, structural adhesives. view less Request Sample
VINNAPAS® B 60 SPEZIAL Wacker Chemical Corporation VINNAPAS B 60 SPECIAL is a thermoplastic polymer that is transparent, colorless, tasteless and odorless. It is a food grade vinyl acetate homopolymer in solid form. VINNAPAS B 60 SPECIAL is used in many applications such as, all-purpose adhesives, antishr...view more VINNAPAS B 60 SPECIAL is a thermoplastic polymer that is transparent, colorless, tasteless and odorless. It is a food grade vinyl acetate homopolymer in solid form. VINNAPAS B 60 SPECIAL is used in many applications such as, all-purpose adhesives, antishrink adhesives, bulk molding compounds, floor coatings, industrial adhesives, parquet flooring and resin transfer molding. view less Request Sample
VINNAPAS® DP 500 Wacker Chemical Corporation VINNAPAS® DP 500 is an aqueous, plasticizer-free polymer dispersion produced from vinyl acetate monomer and has a low sedimentation tendency. It can be used as a raw material for wood glues, paper and packaging adhesives. VINNAPAS® DP 500 may be applied i...view more VINNAPAS® DP 500 is an aqueous, plasticizer-free polymer dispersion produced from vinyl acetate monomer and has a low sedimentation tendency. It can be used as a raw material for wood glues, paper and packaging adhesives. VINNAPAS® DP 500 may be applied in coatings, parquet adhesives, parquet flooring and assembly/ windows and doors. view less Request Sample
VINNAPAS® EAF 380 Wacker Chemical Corporation VINNAPAS® EAF 380 is an aqueous polymer-dispersion based on vinyl acetate, ethylene and acrylate designed for interior and exterior applications. It is free from alkyl phenol ethoxylate (APEO) containing compounds. It is suitable as a binder for inter...view more VINNAPAS® EAF 380 is an aqueous polymer-dispersion based on vinyl acetate, ethylene and acrylate designed for interior and exterior applications. It is free from alkyl phenol ethoxylate (APEO) containing compounds. It is suitable as a binder for interiour and exteriour paints as well as for plasters and thermal insulation systems. Furthermore VINNAPAS® EAF 380 is a suitable binder for heavy duty interior gloss- and semigloss paints with a very low blocking tendency. It can be applied in coatings, emulsion paint, interior paints, silicate emulation paints and silicone resin emulsion paints. view less Request Sample
VINNAPAS® EF 3777 Wacker Chemical Corporation VINNAPAS® EF 3777 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It's free from solvents and plasticizers and has an extremely low content of volatile organic compounds. Additionally it is free from alkyl phenol ethoxylate (APEO) co...view more VINNAPAS® EF 3777 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It's free from solvents and plasticizers and has an extremely low content of volatile organic compounds. Additionally it is free from alkyl phenol ethoxylate (APEO) containing compounds. It is designed to provide outstanding performances in interior paints flat to semi-gloss. VINNAPAS® EF 3777 can be applied in emulsion paints and interior paints. view less Request Sample
VINNAPAS® EF 8001 Wacker Chemical Corporation VINNAPAS® EF 8001 is an aqueous dispersion of a vinyl acetate-ethylene copolymer dispersion. It represents the next in a line of VAE copolymer dispersions that is positioned to broadly replace vinyl acrylics in the architectural coatings industry. It can ...view more VINNAPAS® EF 8001 is an aqueous dispersion of a vinyl acetate-ethylene copolymer dispersion. It represents the next in a line of VAE copolymer dispersions that is positioned to broadly replace vinyl acrylics in the architectural coatings industry. It can be applied in paints such as emulsion and interior. view less Request Sample
VINNAPAS® EF 8300 Wacker Chemical Corporation VINNAPAS® EF 8300 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was developed as a higher performance polymer for interior architectural coating formulations with environmental advantages. It is used as a broad application binde...view more VINNAPAS® EF 8300 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was developed as a higher performance polymer for interior architectural coating formulations with environmental advantages. It is used as a broad application binder for architectural coatings and can be applied in interior paints. view less Request Sample
VINNAPAS® EN 1033 Wacker Chemical Corporation VINNAPAS® EN 1033 (CGN) is a self crosslinking, plasticizer-free, aqueous polymer dispersion from the monomers vinyl acetate and ethylene. This dispersion is particularly suitable as a binder for soft nonwovens. VINNAPAS® EN 1033 (CGN) is suitable for foa...view more VINNAPAS® EN 1033 (CGN) is a self crosslinking, plasticizer-free, aqueous polymer dispersion from the monomers vinyl acetate and ethylene. This dispersion is particularly suitable as a binder for soft nonwovens. VINNAPAS® EN 1033 (CGN) is suitable for foam application, impregnation or spraying and is applied in wall-coverings. view less Request Sample
VINNAPAS® EP 1 Wacker Chemical Corporation VINNAPAS® EP 1 is a plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It is used in adhesives for paper packaging and PVC furniture foil adhesives and adheres well to various plastic surfaces. VINNAPAS® EP 1 is app...view more VINNAPAS® EP 1 is a plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It is used in adhesives for paper packaging and PVC furniture foil adhesives and adheres well to various plastic surfaces. VINNAPAS® EP 1 is applied in coatings. view less Request Sample
VINNAPAS® EP 116 Wacker Chemical Corporation VINNAPAS® EP 116 is an aqueous plasticizer-free dispersion of a copolymer of vinyl acetate and ethylene. It features very good adhesion to natural and synthetic fibers. It can therefore be used to impregnate and coat a variety of textile fabrics such as w...view more VINNAPAS® EP 116 is an aqueous plasticizer-free dispersion of a copolymer of vinyl acetate and ethylene. It features very good adhesion to natural and synthetic fibers. It can therefore be used to impregnate and coat a variety of textile fabrics such as woven, nonwovens and knitted goods as well as tufted and woven carpets. VINNAPAS® EP 116 can be applied in wall-coverings. view less Request Sample