Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...view more
Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. view less
Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...view more
Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. view less
Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...view more
Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. view less
Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...view more
Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. view less
Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...view more
Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. view less
Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...view more
Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. view less
D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations.
D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants.
D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...view more
D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. view less
D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...view more
D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. view less
D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...view more
D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. view less
D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml.
D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml.
D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml.
D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...view more
D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...view more
D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...view more
D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with ...view more
Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with good gloss. Films derived from Dispurez 101 exhibit excellent water and chemical resistance.
The product exhibits rapid hardness development and is therefore suitable for a wide range of end applications in the surface coatings industries. It is particularly suitable as a hard coating for rigid plastic substrates. view less
Dispurez 101A is a hard polyurethane acrylic dispersion designed for excellent pigment compatibility. It’s ideal for use in tough coatings with good durability. Films derived from Incorez Dispurez 101A exhibit excellent water and chemical resistance.
The...view more
Dispurez 101A is a hard polyurethane acrylic dispersion designed for excellent pigment compatibility. It’s ideal for use in tough coatings with good durability. Films derived from Incorez Dispurez 101A exhibit excellent water and chemical resistance.
The product exhibits rapid hardness development and is therefore suitable for a wide range of end applications in the surface coatings industries, particularly industrial wood finishes, hygiene coatings and plastics coatings. view less
Dispurez 102 is a flexible, toughened, self-crosslinking polyurethane dispersion with excellent optical clarity and excellent chemical and block resistance. Upon application, the water evaporates to yield a tough, transparent film with good gloss. Films d...view more
Dispurez 102 is a flexible, toughened, self-crosslinking polyurethane dispersion with excellent optical clarity and excellent chemical and block resistance. Upon application, the water evaporates to yield a tough, transparent film with good gloss. Films derived from Dispurez 102 exhibit excellent chemical, stain and UV resistance. view less
Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...view more
Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. view less
Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and...view more
Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere.
Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content. view less
Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent.
Incozol 4 can be used in both one and two component PU systems. In one component systems it i...view more
Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent.
Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. view less
Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers.
Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...view more
Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers.
Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems.
Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. view less
Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, aut...view more
Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, automotive sealants, anti-graffiti lacquers and waterproof coatings. view less
LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml.
LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1....view more
LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1.04 g/ml. view less
LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml.
LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...view more
LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. view less
LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...view more
LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. view less
LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...view more
LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. view less
LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...view more
LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. view less
LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...view more
LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. view less
LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml.
This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, a long pot life, and utilizes the product Amirez 148/010.
This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, good hardness, faster drying and utilizes the product Amirez 148/024.
This formulation is a clear concrete sealer for waterborne epoxy systems. It features high gloss, excellent hardness, good chemical and water resistance that utilizes the product Amirez 142.
This formulation is a clear concrete sealer that features a high gloss, good hardness, excellent chemical and water resistance that utilizes Amirez 148/024.
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.