| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...view more 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. view less | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...view more Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. view less | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...view more Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. view less | |
| DHA-101 | ANHUI DONGHUI INTERNATIONAL | DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refr...view more DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refractive index of 2.5, an oil absorption of ≤26g/100g, and a pH of 6.5 to 8.5. view less | |
| DHA-102 | ANHUI DONGHUI INTERNATIONAL | DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/...view more DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/cm3 and a refractive index of 2.5. view less | |
| EPS® 2103 | EPS Materials | EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased fle...view more EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased flexibility and decreased permeability to the system. view less | Request Sample |
| EPS® 2121 | EPS Materials | EPS® 2121 is an all acrylic latex general purpose pressure sensitive adhesive for removable applications. EPS® 2121 exhibits low peel, moderate tack, and high shear values. | Request Sample |
| EPS® 2127 | EPS Materials | EPS® 2127 is a high solids acrylic copolymer emulsion for label pressure sensitive adhesive applications. It exhibits an excellent balance of adhesive properties and can be used in both tackified and non-tackified adhesive formulations. | Request Sample |
| EPS® 2128 | EPS Materials | EPS® 2128 is an acrylic emulsion for use in removable pressure sensitive applications. EPS® 2128 exhibits low peel, low tack, and high shear values. | Request Sample |
| EPS® 2133 | EPS Materials | EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film ...view more EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film lamination. Typical values below are for the neat polymer. This polymer is not FDA-approved. view less | Request Sample |
| EPS® 2157 | EPS Materials | EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel...view more EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel and tack that have a harder “zip-like” peel. view less | Request Sample |
| New! EPS® 2210 | EPS Materials | EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup...view more EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup resistance. view less | Request Sample |
| EPS® 2224 | EPS Materials | EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It ...view more EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant formulations that meet ASTM C834 specifications. view less | Request Sample |
| EPS® 2252 | EPS Materials | EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM)...view more EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM) rubber. EPS® 2252 provides the capability to formulate coatings at <50g/L VOC. view less | Request Sample |
| EPS® 2257 | EPS Materials | EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, g...view more EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, good water resistance, the small particle size polymer offers excellent penetration and appearance properties, good blush resistance, also a freeze-thaw stable polymer and concrete sealer formulation, and allows fast hardness development and excellent UV resistance and non-yellowing. This product has no APEO containing raw materials view less | Request Sample |
| EPS® 2272 | EPS Materials | EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low o...view more EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low odor, good blush resistance, excellent water resistance, low VOC formulations (< 100 g/l VOC) due to low coalescent demand, ASTM C-1315 Type I Class A, non-yellowing and can be achieved with a suitable UV additive package. This product has no APEO containing raw materials. view less | Request Sample |
| EPS® 2293 | EPS Materials | EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excelle...view more EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excellent early water resistance–no blushing, whitening or blistering, excellent gloss development and gloss retention, wet and dry adhesion to tiles, glass and cementitious substrates, low temperature film formation (10 mils at 38°F), and chemical resistance as well as abrasion resistance. It is also VOC compliant (< 100 g/l clear formulations and <50 g/l pigmented formulations) with freeze-thaw stability and has no APEO containing raw materials. view less | Request Sample |
| EPS® 2420 | EPS Materials | EPS® 2420 is a self-crosslinking all-acrylic binder for interior and exterior wood applications such as multi-coat, enamels, and varnishes with exceptional leveling properties and UV resistance. In-can transparency is a key feature of this product. | Request Sample |
| EPS® 2426 | EPS Materials | EPS® 2426 is a styrenated acrylic emulsion offering excellent early water resistance when used as a wood edge sealer. | Request Sample |
| EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common ap...view more EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common applications include primers, topcoats, and self-sealers. view less | Request Sample |
| EPS® 2452 | EPS Materials | EPS® 2452 is used as the principal vehicle for white pigmented high-performance furniture and wood finishes where IKEA R2 (coffee and ethanol resistance) performance is necessary. | Request Sample |
| EPS® 2454 | EPS Materials | EPS® 2454 is used as the principal vehicle for primers and self-sealers when high clarity, excellent penetration, and minimal grain raising is a must. The product has been specifically developed for oak to avoid undesired discoloration. | Request Sample |
| EPS® 2458 | EPS Materials | EPS® 2458 is a water-based, self-crosslinking all-acrylic binder for interior and exterior applications with very good in-can transparency and block resistance. | Request Sample |
| EPS® 2512 | EPS Materials | EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benef...view more EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benefits of this product include, alkyd-like gloss and depth of image (DOI), excellent corrosion and light chemical resistance, early water resistance and blush resistance, early adhesion to a variety of ferrous and non-ferrous substrates, including CRS, aluminum, and galvanized substrates. It also has excellent shear stability, and can be used without detriment in pigment grinding phase of formulas, has outstanding dirt pick up resistance and is free of Alkyl Phenol Ethoxylate (APE). view less | Request Sample |
| EPS® 2513 | EPS Materials | EPS® 2513 is a styrenated acrylic emulsion offering excellent corrosion resistance, adhesion and early water resistance. EPS® 2513 provides paint formulators the capability to achieve these properties at less than 100 grams/liter VOC. | Request Sample |
| EPS® 2526 | EPS Materials | EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance...view more EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance, hardness development and block resistance, resistance to yellowing, chemical resistance, ‘hot tire’ resistance, and has a high gloss characteristic. view less | Request Sample |
| EPS® 2533 | EPS Materials | EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as ...view more EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| EPS® 2535 | EPS Materials | EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general prod...view more EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general product finishes on various substrates. view less | Request Sample |
| EPS® 2538 | EPS Materials | EPS® 2538 is a styrenated acrylic emulsion offering excellent hardness and chemical resistance properties. EPS 2538 provides paint formulators a low VOC waterborne alternative to solvent-based finishes on cementitious, wood and plastic substrates. | Request Sample |
| EPS® 2540 | EPS Materials | EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance v...view more EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance vehicles and general product finishes on ferrous and non-ferrous metal, wood and plastic substrates. view less | Request Sample |
| EPS® 2545 | EPS Materials | EPS® 2545 is an alkali strippable, styrenated acrylic dispersion offering excellent early water resistance. The very small particle size and ability to re-solubilize itself also makes EPS® 2545 an ideal vehicle for interior wood wiping stains. | Request Sample |
| EPS® 2550 | EPS Materials | EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plast...view more EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plastics, ferrous and non-ferrous metals. view less | Request Sample |
| EPS® 2559 | EPS Materials | EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydr...view more EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydrophobic properties of EPS® 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and it can be used as the binder in tile mastics. view less | Request Sample |
| EPS® 2570 | EPS Materials | EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100...view more EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100g/L VOC. view less | Request Sample |
| EPS® 2574 | EPS Materials | EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferr...view more EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferrous metals, cementitious, wood and plastic substrates. It has excellent hardness development, block, print and stain resistance, as well as very good corrosion resistance, even without the use of corrosion resistant pigments or additives. view less | Request Sample |
| EPS® 2580 | EPS Materials | EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 pr...view more EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 provides the capability to formulate coatings at <50g/L VOC. view less | Request Sample |
| EPS® 2585 | EPS Materials | EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss ...view more EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss retention and adhesion to multiple substrates. view less | Request Sample |
| EPS® 2706 | EPS Materials | EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appear...view more EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appearance of exterior coatings. view less | Request Sample |
| EPS® 2708 | EPS Materials | EPS® 2708 is an all-acrylic emulsion designed for high alkali applications. It can be used as a polymer admixture for cement-based products, and as a binder/primer for coatings over cementitious substrates. | Request Sample |
| EPS® 2719 | EPS Materials | EPS® 2719 is an all-acrylic emulsion designed to eliminate asphalt bleed through in cool roof coatings while maintaining flexibility and toughness. Roof coatings based on EPS® 2719 offer UV and dirt pick-up resistance and excellent adhesion. | Request Sample |
| EPS® 2720 | EPS Materials | EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high ...view more EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high through semi-gloss white to neutral base Architectural DIY and Professional paints. view less | Request Sample |
| EPS® 2741 | EPS Materials | EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architect...view more EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architectural DIY and/or Professional paint formulations. view less | Request Sample |
| EPS® 2786 | EPS Materials | EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...view more EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. view less | Request Sample |
| EPS® 2799 | EPS Materials | EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent ...view more EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. view less | Request Sample |
| EPS® 2843 | EPS Materials | EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...view more EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| EPS® 4203 | EPS Materials | EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol a...view more EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol and household stain resistance are important. This dispersion does not contain N-methyl pyrrolidone or reportable amounts of TEA. It is also a Prop. 65 compliant dispersion as it does not contain hydrazine. view less | Request Sample |
| EPS® 4216 | EPS Materials | EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous...view more EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous metals, and various plastics. view less | Request Sample |
| EPS® 9147 | EPS Materials | EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stabilit...view more EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stability should be preformed. This is a permanent coalescent that remains in the paint film and should not be stored in PVC containers or piping for extended periods of time. view less | Request Sample |
| ExacTint® | EPS Materials | ExacTint® is an in-plant colorant in a modified alkyd vehicle in mineral spirits. It is useful in most conventional alkyd coatings systems for architectural or industrial applications. | Request Sample |
| Forton® VF 774 | EPS Materials | Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be sta...view more Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite. view less | Request Sample |
| Forton® VF 812 | EPS Materials | Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific a...view more Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific alpha hemi-hydrate gypsums and dry melamine resin, Forton® VF-812 at proper loadings, results in a product suitable for interior and exterior use. view less | Request Sample |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....view more Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". view less | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...view more Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. view less | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...view more Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. view less | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...view more Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...view more Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. view less | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...view more Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| NovoColor® HP II | EPS Materials | NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications...view more NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications. view less | Request Sample |
| NovoColor® II | EPS Materials | NovoColor® II is a low VOC universal colorant designed for point of sales usage in decorative and light industrial coatings. Formulated without APEO or ethylene and propylene glycols. | Request Sample |
| NovoColor® IP | EPS Materials | NovoColor® IP is a broadly compatibile, in-plant colorant for waterborne decorative and industrial coating applications. Non-VOC and formulated without APEO or ethylene and propylene glycols. | Request Sample |
| NovoColor® SF | EPS Materials | NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These col...view more NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These colorants are controlled to very stringent color and opacity standards, and give the user batch to batch appearance uniformity. view less | Request Sample |
| OptiColor® XP | EPS Materials | OptiColor® XP are high performance, industrial colorants for point of sales and in-plant solventborne coating systems. | Request Sample |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...view more Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. view less | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...view more Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. view less | |
| R-1200 | ANHUI DONGHUI INTERNATIONAL | R-1200 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥98.2%. This product has a specific gravity of 4.0 g/cm3, an oil absorption of ≤14.5g/100g, and a pH of 7.0 to 8.0. It is commonly used in base paints and road mark paints. | |
| R-1201 | ANHUI DONGHUI INTERNATIONAL | R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an...view more R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤17g/100g, and a pH of 6.5 to 8.0. view less | |
| R-1202 | ANHUI DONGHUI INTERNATIONAL | R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/c...view more R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤19g/100g, and a pH of 6.5 to 8.0. view less | |
| R-1203 | ANHUI DONGHUI INTERNATIONAL | R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coati...view more R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coatings, and solvent-based coatings. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. view less | |
| R-215 | ANHUI DONGHUI INTERNATIONAL | R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a spec...view more R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a specific gravity of 3.9 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 8.5. view less | |
| R-216 | ANHUI DONGHUI INTERNATIONAL | R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of...view more R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. view less | |
| R-219 | ANHUI DONGHUI INTERNATIONAL | R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific ...view more R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 9.0. view less | |
| SandGel B | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...view more SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. view less | |
| SandGel BL | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...view more SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. view less | |
| SandGel BN | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...view more SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. view less | |
| SandGel C | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...view more SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. view less | |
| SandGel HL | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...view more SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. view less | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...view more SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. view less | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...view more SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. view less | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...view more Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. view less | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...view more Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...view more Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...view more Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. view less | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...view more Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. view less | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...view more Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. view less | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...view more SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. view less | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...view more SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. view less | |
| Silver Coated Copper Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...view more Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. view less | |
| Sulfolane Anhydrous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...view more Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. view less | |
| Sulfolane Aqueous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...view more Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. view less | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...view more UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. view less | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...view more UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. view less | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...view more UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. view less |
