UL Prospector
Prospector
Company: EPS Materials  Company: ANHUI DONGHUI INTERNATIONAL  Company: ANGUS Chemical Company  Clear All 

Success!

Successfully saved your search
132 Results
AEPD® VOX 1000 ANGUS Chemical Company AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less
ALKATERGE®-T ANGUS Chemical Company ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...view more ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less
AMP® ANGUS Chemical Company AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This pro...view more AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water systems, metalworking fluids, and polyethylene and wax emulsions. view less
AMP-95® ANGUS Chemical Company AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less
AVANTANE® PA 4000 ANGUS Chemical Company AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive qu...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less
DHA-101 ANHUI DONGHUI INTERNATIONAL DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refr...view more DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refractive index of 2.5, an oil absorption of ≤26g/100g, and a pH of 6.5 to 8.5. view less
DHA-102 ANHUI DONGHUI INTERNATIONAL DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/...view more DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/cm3 and a refractive index of 2.5. view less
DMAMP-80® ANGUS Chemical Company DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less
EPS® 2103 EPS Materials EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased fle...view more EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased flexibility and decreased permeability to the system. view less Request Sample
EPS® 2121 EPS Materials EPS® 2121 is an all acrylic latex general purpose pressure sensitive adhesive for removable applications. EPS® 2121 exhibits low peel, moderate tack, and high shear values. Request Sample
EPS® 2127 EPS Materials EPS® 2127 is a high solids acrylic copolymer emulsion for label pressure sensitive adhesive applications. It exhibits an excellent balance of adhesive properties and can be used in both tackified and non-tackified adhesive formulations. Request Sample
EPS® 2128 EPS Materials EPS® 2128 is an acrylic emulsion for use in removable pressure sensitive applications. EPS® 2128 exhibits low peel, low tack, and high shear values. Request Sample
EPS® 2133 EPS Materials EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film ...view more EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film lamination. Typical values below are for the neat polymer. This polymer is not FDA-approved. view less Request Sample
EPS® 2157 EPS Materials EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel...view more EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel and tack that have a harder “zip-like” peel. view less Request Sample
New! EPS® 2210 EPS Materials EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup...view more EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup resistance. view less Request Sample
EPS® 2224 EPS Materials EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It ...view more EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant formulations that meet ASTM C834 specifications. view less Request Sample
EPS® 2252 EPS Materials EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM)...view more EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM) rubber. EPS® 2252 provides the capability to formulate coatings at <50g/L VOC. view less Request Sample
EPS® 2257 EPS Materials EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, g...view more EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, good water resistance, the small particle size polymer offers excellent penetration and appearance properties, good blush resistance, also a freeze-thaw stable polymer and concrete sealer formulation, and allows fast hardness development and excellent UV resistance and non-yellowing. This product has no APEO containing raw materials view less Request Sample
EPS® 2272 EPS Materials EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low o...view more EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low odor, good blush resistance, excellent water resistance, low VOC formulations (< 100 g/l VOC) due to low coalescent demand, ASTM C-1315 Type I Class A, non-yellowing and can be achieved with a suitable UV additive package. This product has no APEO containing raw materials. view less Request Sample
EPS® 2293 EPS Materials EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excelle...view more EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excellent early water resistance–no blushing, whitening or blistering, excellent gloss development and gloss retention, wet and dry adhesion to tiles, glass and cementitious substrates, low temperature film formation (10 mils at 38°F), and chemical resistance as well as abrasion resistance. It is also VOC compliant (< 100 g/l clear formulations and <50 g/l pigmented formulations) with freeze-thaw stability and has no APEO containing raw materials. view less Request Sample
EPS® 2420 EPS Materials EPS® 2420 is a self-crosslinking all-acrylic binder for interior and exterior wood applications such as multi-coat, enamels, and varnishes with exceptional leveling properties and UV resistance. In-can transparency is a key feature of this product. Request Sample
EPS® 2426 EPS Materials EPS® 2426 is a styrenated acrylic emulsion offering excellent early water resistance when used as a wood edge sealer. Request Sample
EPS® 2436 EPS Materials EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common ap...view more EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common applications include primers, topcoats, and self-sealers. view less Request Sample
EPS® 2452 EPS Materials EPS® 2452 is used as the principal vehicle for white pigmented high-performance furniture and wood finishes where IKEA R2 (coffee and ethanol resistance) performance is necessary. Request Sample
EPS® 2454 EPS Materials EPS® 2454 is used as the principal vehicle for primers and self-sealers when high clarity, excellent penetration, and minimal grain raising is a must. The product has been specifically developed for oak to avoid undesired discoloration. Request Sample
EPS® 2458 EPS Materials EPS® 2458 is a water-based, self-crosslinking all-acrylic binder for interior and exterior applications with very good in-can transparency and block resistance. Request Sample
EPS® 2512 EPS Materials EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benef...view more EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benefits of this product include, alkyd-like gloss and depth of image (DOI), excellent corrosion and light chemical resistance, early water resistance and blush resistance, early adhesion to a variety of ferrous and non-ferrous substrates, including CRS, aluminum, and galvanized substrates. It also has excellent shear stability, and can be used without detriment in pigment grinding phase of formulas, has outstanding dirt pick up resistance and is free of Alkyl Phenol Ethoxylate (APE). view less Request Sample
EPS® 2513 EPS Materials EPS® 2513 is a styrenated acrylic emulsion offering excellent corrosion resistance, adhesion and early water resistance. EPS® 2513 provides paint formulators the capability to achieve these properties at less than 100 grams/liter VOC. Request Sample
EPS® 2526 EPS Materials EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance...view more EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance, hardness development and block resistance, resistance to yellowing, chemical resistance, ‘hot tire’ resistance, and has a high gloss characteristic. view less Request Sample
EPS® 2533 EPS Materials EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as ...view more EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less Request Sample
EPS® 2535 EPS Materials EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general prod...view more EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general product finishes on various substrates. view less Request Sample
EPS® 2538 EPS Materials EPS® 2538 is a styrenated acrylic emulsion offering excellent hardness and chemical resistance properties. EPS 2538 provides paint formulators a low VOC waterborne alternative to solvent-based finishes on cementitious, wood and plastic substrates. Request Sample
EPS® 2540 EPS Materials EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance v...view more EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance vehicles and general product finishes on ferrous and non-ferrous metal, wood and plastic substrates. view less Request Sample
EPS® 2545 EPS Materials EPS® 2545 is an alkali strippable, styrenated acrylic dispersion offering excellent early water resistance. The very small particle size and ability to re-solubilize itself also makes EPS® 2545 an ideal vehicle for interior wood wiping stains. Request Sample
EPS® 2550 EPS Materials EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plast...view more EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plastics, ferrous and non-ferrous metals. view less Request Sample
EPS® 2559 EPS Materials EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydr...view more EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydrophobic properties of EPS® 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and it can be used as the binder in tile mastics. view less Request Sample
EPS® 2570 EPS Materials EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100...view more EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100g/L VOC. view less Request Sample
EPS® 2574 EPS Materials EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferr...view more EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferrous metals, cementitious, wood and plastic substrates. It has excellent hardness development, block, print and stain resistance, as well as very good corrosion resistance, even without the use of corrosion resistant pigments or additives. view less Request Sample
EPS® 2580 EPS Materials EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 pr...view more EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 provides the capability to formulate coatings at <50g/L VOC. view less Request Sample
EPS® 2585 EPS Materials EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss ...view more EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss retention and adhesion to multiple substrates. view less Request Sample
EPS® 2706 EPS Materials EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appear...view more EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appearance of exterior coatings. view less Request Sample
EPS® 2708 EPS Materials EPS® 2708 is an all-acrylic emulsion designed for high alkali applications. It can be used as a polymer admixture for cement-based products, and as a binder/primer for coatings over cementitious substrates. Request Sample
EPS® 2719 EPS Materials EPS® 2719 is an all-acrylic emulsion designed to eliminate asphalt bleed through in cool roof coatings while maintaining flexibility and toughness. Roof coatings based on EPS® 2719 offer UV and dirt pick-up resistance and excellent adhesion. Request Sample
EPS® 2720 EPS Materials EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high ...view more EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high through semi-gloss white to neutral base Architectural DIY and Professional paints. view less Request Sample
EPS® 2741 EPS Materials EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architect...view more EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architectural DIY and/or Professional paint formulations. view less Request Sample
EPS® 2786 EPS Materials EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...view more EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. view less Request Sample
EPS® 2799 EPS Materials EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent ...view more EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. view less Request Sample
EPS® 2843 EPS Materials EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...view more EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less Request Sample
EPS® 4203 EPS Materials EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol a...view more EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol and household stain resistance are important. This dispersion does not contain N-methyl pyrrolidone or reportable amounts of TEA. It is also a Prop. 65 compliant dispersion as it does not contain hydrazine. view less Request Sample
EPS® 4216 EPS Materials EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous...view more EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous metals, and various plastics. view less Request Sample
EPS® 9147 EPS Materials EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stabilit...view more EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stability should be preformed. This is a permanent coalescent that remains in the paint film and should not be stored in PVC containers or piping for extended periods of time. view less Request Sample
ExacTint® EPS Materials ExacTint® is an in-plant colorant in a modified alkyd vehicle in mineral spirits. It is useful in most conventional alkyd coatings systems for architectural or industrial applications. Request Sample
FLEXITANE® CA 6000 ANGUS Chemical Company FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less
Forton® VF 774 EPS Materials Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be sta...view more Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite. view less Request Sample
Forton® VF 812 EPS Materials Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific a...view more Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific alpha hemi-hydrate gypsums and dry melamine resin, Forton® VF-812 at proper loadings, results in a product suitable for interior and exterior use. view less Request Sample
NIKANE® MS 3000 ANGUS Chemical Company NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent...view more NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent that has been designed for use with a wide variety of other solvents, it is of particular value in formulations as a replacement for a portion of active solvents such as methyl isobutyl ketone (MIBK) or acetates (n-butyl acetate, etc.). view less
NIKANE® MS 5000 ANGUS Chemical Company NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirab...view more NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirable, if not essential, in many applications. view less
NovoColor® HP II EPS Materials NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications...view more NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications. view less Request Sample
NovoColor® II EPS Materials NovoColor® II is a low VOC universal colorant designed for point of sales usage in decorative and light industrial coatings. Formulated without APEO or ethylene and propylene glycols. Request Sample
NovoColor® IP EPS Materials NovoColor® IP is a broadly compatibile, in-plant colorant for waterborne decorative and industrial coating applications. Non-VOC and formulated without APEO or ethylene and propylene glycols. Request Sample
NovoColor® SF EPS Materials NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These col...view more NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These colorants are controlled to very stringent color and opacity standards, and give the user batch to batch appearance uniformity. view less Request Sample
OptiColor® XP EPS Materials OptiColor® XP are high performance, industrial colorants for point of sales and in-plant solventborne coating systems. Request Sample
R-1200 ANHUI DONGHUI INTERNATIONAL R-1200 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥98.2%. This product has a specific gravity of 4.0 g/cm3, an oil absorption of ≤14.5g/100g, and a pH of 7.0 to 8.0. It is commonly used in base paints and road mark paints.
R-1201 ANHUI DONGHUI INTERNATIONAL R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an...view more R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤17g/100g, and a pH of 6.5 to 8.0. view less
R-1202 ANHUI DONGHUI INTERNATIONAL R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/c...view more R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤19g/100g, and a pH of 6.5 to 8.0. view less
R-1203 ANHUI DONGHUI INTERNATIONAL R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coati...view more R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coatings, and solvent-based coatings. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. view less
R-215 ANHUI DONGHUI INTERNATIONAL R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a spec...view more R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a specific gravity of 3.9 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 8.5. view less
R-216 ANHUI DONGHUI INTERNATIONAL R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of...view more R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. view less
R-219 ANHUI DONGHUI INTERNATIONAL R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific ...view more R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 9.0. view less
ZOLDINE® MS-PLUS ANGUS Chemical Company ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials use...view more ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials used in most polyurethane and polyurea systems. This product will also alleviate the detrimental effects of humidity in the cast or spray application of two-component polyurethane and polyurea systems. view less
100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) EPS Materials 100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) formulation information.
100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) EPS Materials 100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) formulation information.
100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) EPS Materials 100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) formulation information.
100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1) EPS Materials This is a 100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1).
≤275 G/L Satin Varnish (Formulation #EPS 4431BT4) EPS Materials This is a ≤275 G/L Satin Varnish (Formulation #EPS 4431BT4).
40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) EPS Materials 40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) formulation information.
Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1) EPS Materials This is a Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1).
C-1315 Cure and Seal (Formulation #EPS 2272 CS1) EPS Materials This is a C-1315 Cure and Seal (Formulation #EPS 2272 CS1).
C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2) EPS Materials This is a C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2).
Cherry Interior Wiping Stain (Formulation #EPS 2545 STN1) EPS Materials Cherry Interior Wiping Stain (Formulation #EPS 2545 STN1) formulation information.
Clear Interior Topcoat with EPS® 2436 EPS Materials EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings.
Clear Satin Wood Finish (Formulation EPS 4216 SATIN1) EPS Materials This formulation produces a clear, satin wood finish. It features the product EPS® 4216.
Clear Tint Base (Formulation #EPS 2545 CLR) EPS Materials Clear Tint Base (Formulation #EPS 2545 CLR) formulation information.
Concrete Cure & Seal (Formulation #EPS 2526 CS1) EPS Materials Concrete Cure & Seal (Formulation #EPS 2526 CS1) formulation information.
Concrete Sealer/Dustproofer (Formulation #EPS 2526 CLR LS2) EPS Materials Concrete Sealer/Dustproofer (Formulation #EPS 2526 CLR LS2) formulation information.
EPS® 2293 Clear Wet-Look Sealer/ Stain Base for Concrete (Formulation # 2293 CS-2) EPS Materials EPS® 2293 Clear Wet-Look Sealer/ Stain Base for Concrete (Formulation # 2293 CS-2) formulation information.
EPS® 2293 Gray Floor Paint for Concrete- 50g/l VOC (Formulation # 2293 FP-1) EPS Materials This is a formulation for EPS® 2293 Gray Floor Paint for Concrete- 50g/l VOC (Formulation # 2293 FP-1).
EPS 2293 ST1 (261-94) (8/15) Semi-transparent Exterior Wood Stain – 100 g/L VOC EPS Materials The stain base can be tinted with NovoColor® IP low VOC colorants from CCA. For example, the addition of 3.0lb of 8538T Trans Oxide Red and 15.0lb 8570T Trans Oxide Yellow to 100 gal of base will achieve a Cedar color S/T stain.
EPS® 2570 WHT SP-1 DTM EPS Materials This formulation produces a direct-to-metal coating. It features the product EPS® 2570.
EPS® 2570 WHT SP-2 DTM EPS Materials This formulation produces a direct-to-metal coating. It features the product EPS® 2570.
EPS® 2580 DTM Primer (Formulation EPS 2580 WHT PR-1 DTM) EPS Materials EPS® 2580 DTM Primer (Formulation EPS 2580 WHT PR-1 DTM) formulation information. EPS® 2580 provides the capability to formulate coatings at <50g/L VOC.
EPS® 2580 DTM Ultra Deep Tint Base (Formulation EPS 2580 UDP-1 DTM) EPS Materials EPS® 2580 DTM Ultra Deep Tint Base (Formulation EPS 2580 UDP-1 DTM) formulation information. EPS® 2580 provides the capability to formulate coatings at <50g/L VOC.
EPS® 2580 White High Gloss Enamel (Formulation EPS 2580 WHT SP-1) EPS Materials EPS® 2580 White High Gloss Enamel (Formulation EPS 2580 WHT SP-1) formulation information. EPS® 2580 provides the capability to formulate coatings at <50g/L VOC.
EPS 2786 Gloss Ultra-Deep Base Low VOC, Interior/Exterior EPS Materials EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...view more EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. view less
EPS 2786 Gloss White/Pastel Base Very Low VOC, Interior/Exterior EPS Materials EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...view more EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. view less
EPS 2799 Gloss Ultra-Deep Base Low VOC, Interior/Exterior EPS Materials This formulation produces a glossy, ultra-deep base for interior/exterior applications. It has low VOC.
EPS 2799 Gloss White/Pastel Dry TiO2 Base Very Low VOC, Interior/Exterior EPS Materials This formulation produces a glossy white/pastel base for interior and exterior applications. It has very low VOC.
EPS 2799 Gloss White/Pastel Slurry TiO2 Base Very Low VOC, Interior/Exterior EPS Materials This formulation produces a glossy white/pastel base for interior and exterior applications. It has very low VOC.
Exterior Semi-Gloss (Formulation #EPS 2708 BT1) EPS Materials Exterior Semi-Gloss (Formulation #EPS 2708 BT1) formulation information.
Floor Paint (Formulation #EPS 2708 TG1) EPS Materials Floor Paint (Formulation #EPS 2708 TG1) formulation information.