| EPS® 2103 | EPS Materials | EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased fle...view more EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased flexibility and decreased permeability to the system. view less | Request Sample |
| EPS® 2121 | EPS Materials | EPS® 2121 is an all acrylic latex general purpose pressure sensitive adhesive for removable applications. EPS® 2121 exhibits low peel, moderate tack, and high shear values. | Request Sample |
| EPS® 2127 | EPS Materials | EPS® 2127 is a high solids acrylic copolymer emulsion for label pressure sensitive adhesive applications. It exhibits an excellent balance of adhesive properties and can be used in both tackified and non-tackified adhesive formulations. | Request Sample |
| EPS® 2128 | EPS Materials | EPS® 2128 is an acrylic emulsion for use in removable pressure sensitive applications. EPS® 2128 exhibits low peel, low tack, and high shear values. | Request Sample |
| EPS® 2133 | EPS Materials | EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film ...view more EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film lamination. Typical values below are for the neat polymer. This polymer is not FDA-approved. view less | Request Sample |
| EPS® 2157 | EPS Materials | EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel...view more EPS® 2157 is an all-acrylic polymer emulsion for use in removable pressure sensitive adhesive applications. EPS® 2157 exhibits moderate peel and tack with high shear values. It also exhibits a “soft” peel as compared to other products with equivalent peel and tack that have a harder “zip-like” peel. view less | Request Sample |
| New! EPS® 2210 | EPS Materials | EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup...view more EPS® 2210 is an all-acrylic emulsion designed for use in elastomeric roof and wall coatings. Coatings formulated with EPS® 2210 are capable of conforming to ASTM D6083 Type II standards while still providing excellent asphalt bleed-through and dirt pickup resistance. view less | Request Sample |
| EPS® 2224 | EPS Materials | EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It ...view more EPS® 2224 is an acrylic emulsion offering excellent alkali and water resistance, dirt pick-up resistance and flexibility. EPS® 2224 can be used in sloped roof formulations which, when properly formulated with EPS® 9147, meet ASTM D6083 specifications. It is also an excellent choice for both clear and pigmented caulk and sealant formulations that meet ASTM C834 specifications. view less | Request Sample |
| EPS® 2252 | EPS Materials | EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM)...view more EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing. Basecoats and primers based on EPS® 2252 offer outstanding adhesion to thermoplastic olefin (TPO) and ethylene propylene diene monomer (EPDM) rubber. EPS® 2252 provides the capability to formulate coatings at <50g/L VOC. view less | Request Sample |
| EPS® 2257 | EPS Materials | EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, g...view more EPS® 2257 is an all-acrylic emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. The gloss increases with multiple applications. Other benefits with use are low VOC / low odor, low coalescing solvent demand, good water resistance, the small particle size polymer offers excellent penetration and appearance properties, good blush resistance, also a freeze-thaw stable polymer and concrete sealer formulation, and allows fast hardness development and excellent UV resistance and non-yellowing. This product has no APEO containing raw materials view less | Request Sample |
| EPS® 2272 | EPS Materials | EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low o...view more EPS® 2272 is a styrenated acrylic emulsion offering excellent water retention properties. It can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I class C cure and seal membranes. It has xcellent water retention properties, low odor, good blush resistance, excellent water resistance, low VOC formulations (< 100 g/l VOC) due to low coalescent demand, ASTM C-1315 Type I Class A, non-yellowing and can be achieved with a suitable UV additive package. This product has no APEO containing raw materials. view less | Request Sample |
| EPS® 2293 | EPS Materials | EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excelle...view more EPS® 2293 is a self-crosslinking all-acrylic emulsion offering adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. By using this product clear coatings can be formulated less than 100g/l VOC. It has excellent early water resistance–no blushing, whitening or blistering, excellent gloss development and gloss retention, wet and dry adhesion to tiles, glass and cementitious substrates, low temperature film formation (10 mils at 38°F), and chemical resistance as well as abrasion resistance. It is also VOC compliant (< 100 g/l clear formulations and <50 g/l pigmented formulations) with freeze-thaw stability and has no APEO containing raw materials. view less | Request Sample |
| EPS® 2420 | EPS Materials | EPS® 2420 is a self-crosslinking all-acrylic binder for interior and exterior wood applications such as multi-coat, enamels, and varnishes with exceptional leveling properties and UV resistance. In-can transparency is a key feature of this product. | Request Sample |
| EPS® 2426 | EPS Materials | EPS® 2426 is a styrenated acrylic emulsion offering excellent early water resistance when used as a wood edge sealer. | Request Sample |
| EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common ap...view more EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common applications include primers, topcoats, and self-sealers. view less | Request Sample |
| EPS® 2452 | EPS Materials | EPS® 2452 is used as the principal vehicle for white pigmented high-performance furniture and wood finishes where IKEA R2 (coffee and ethanol resistance) performance is necessary. | Request Sample |
| EPS® 2454 | EPS Materials | EPS® 2454 is used as the principal vehicle for primers and self-sealers when high clarity, excellent penetration, and minimal grain raising is a must. The product has been specifically developed for oak to avoid undesired discoloration. | Request Sample |
| EPS® 2458 | EPS Materials | EPS® 2458 is a water-based, self-crosslinking all-acrylic binder for interior and exterior applications with very good in-can transparency and block resistance. | Request Sample |
| EPS® 2512 | EPS Materials | EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benef...view more EPS® 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. Benefits of this product include, alkyd-like gloss and depth of image (DOI), excellent corrosion and light chemical resistance, early water resistance and blush resistance, early adhesion to a variety of ferrous and non-ferrous substrates, including CRS, aluminum, and galvanized substrates. It also has excellent shear stability, and can be used without detriment in pigment grinding phase of formulas, has outstanding dirt pick up resistance and is free of Alkyl Phenol Ethoxylate (APE). view less | Request Sample |
| EPS® 2513 | EPS Materials | EPS® 2513 is a styrenated acrylic emulsion offering excellent corrosion resistance, adhesion and early water resistance. EPS® 2513 provides paint formulators the capability to achieve these properties at less than 100 grams/liter VOC. | Request Sample |
| EPS® 2526 | EPS Materials | EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance...view more EPS® 2526 is a styrenated acrylic emulsion offering excellent hardness and wet/dry film clarity. It is well suited for use in clear and pigmented finishes on cementitious substrates. It has excellent wet film clarity, dry film clarity and blush resistance, hardness development and block resistance, resistance to yellowing, chemical resistance, ‘hot tire’ resistance, and has a high gloss characteristic. view less | Request Sample |
| EPS® 2533 | EPS Materials | EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as ...view more EPS® 2533 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. It provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| EPS® 2535 | EPS Materials | EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general prod...view more EPS® 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. It provides a low VOC, waterborne alternative to alkyd maintenance vehicles and general product finishes on various substrates. view less | Request Sample |
| EPS® 2538 | EPS Materials | EPS® 2538 is a styrenated acrylic emulsion offering excellent hardness and chemical resistance properties. EPS 2538 provides paint formulators a low VOC waterborne alternative to solvent-based finishes on cementitious, wood and plastic substrates. | Request Sample |
| EPS® 2540 | EPS Materials | EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance v...view more EPS® 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development/gloss retention. EPS® 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance vehicles and general product finishes on ferrous and non-ferrous metal, wood and plastic substrates. view less | Request Sample |
| EPS® 2545 | EPS Materials | EPS® 2545 is an alkali strippable, styrenated acrylic dispersion offering excellent early water resistance. The very small particle size and ability to re-solubilize itself also makes EPS® 2545 an ideal vehicle for interior wood wiping stains. | Request Sample |
| EPS® 2550 | EPS Materials | EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plast...view more EPS® 2550 is a styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss and chemical resistance. Coatings that are produced with it also exhibit good block resistance and excellent adhesion to plastics, ferrous and non-ferrous metals. view less | Request Sample |
| EPS® 2559 | EPS Materials | EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydr...view more EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydrophobic properties of EPS® 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and it can be used as the binder in tile mastics. view less | Request Sample |
| EPS® 2570 | EPS Materials | EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100...view more EPS® 2570 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. This product provides the capability to formulate coatings at <100g/L VOC. view less | Request Sample |
| EPS® 2574 | EPS Materials | EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferr...view more EPS® 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS® 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferrous metals, cementitious, wood and plastic substrates. It has excellent hardness development, block, print and stain resistance, as well as very good corrosion resistance, even without the use of corrosion resistant pigments or additives. view less | Request Sample |
| EPS® 2580 | EPS Materials | EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 pr...view more EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 provides the capability to formulate coatings at <50g/L VOC. view less | Request Sample |
| EPS® 2585 | EPS Materials | EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss ...view more EPS® 2585 is a high solids acrylic emulsion for <100g/L VOC direct-to-metal (DTM) applications. Typical performance of EPS 2585 include hardness, flexibility, and corrosion resistance. This polymer can be used for exterior applications as it offers gloss retention and adhesion to multiple substrates. view less | Request Sample |
| EPS® 2706 | EPS Materials | EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appear...view more EPS® 2706 is a non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. It offers advanced dirt resistance technology to improve the brightness and appearance of exterior coatings. view less | Request Sample |
| EPS® 2708 | EPS Materials | EPS® 2708 is an all-acrylic emulsion designed for high alkali applications. It can be used as a polymer admixture for cement-based products, and as a binder/primer for coatings over cementitious substrates. | Request Sample |
| EPS® 2719 | EPS Materials | EPS® 2719 is an all-acrylic emulsion designed to eliminate asphalt bleed through in cool roof coatings while maintaining flexibility and toughness. Roof coatings based on EPS® 2719 offer UV and dirt pick-up resistance and excellent adhesion. | Request Sample |
| EPS® 2720 | EPS Materials | EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high ...view more EPS® 2720 is a 100% acrylic film forming polymer based on Self-Crosslinking Technology which makes it an excellent choice for high performance gloss interior and exterior architectural coatings. EPS 2720 is a versatile polymer recommended for use in high through semi-gloss white to neutral base Architectural DIY and Professional paints. view less | Request Sample |
| EPS® 2741 | EPS Materials | EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architect...view more EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architectural DIY and/or Professional paint formulations. view less | Request Sample |
| EPS® 2786 | EPS Materials | EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...view more EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. view less | Request Sample |
| EPS® 2799 | EPS Materials | EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent ...view more EPS® 2799 is a 100% acrylic film-forming polymer that is an excellent choice for high performance gloss interior and exterior architectural coatings. It is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require excellent hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. view less | Request Sample |
| EPS® 2843 | EPS Materials | EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...view more EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| EPS® 4203 | EPS Materials | EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol a...view more EPS® 4203 is a self-crosslinking polyurethane dispersion/acrylic polymer with excellent abrasion and stain resistance. Primary end uses are for wood substrates (except for commercial flooring), blending with acrylic emulsions, and plastics where alcohol and household stain resistance are important. This dispersion does not contain N-methyl pyrrolidone or reportable amounts of TEA. It is also a Prop. 65 compliant dispersion as it does not contain hydrazine. view less | Request Sample |
| EPS® 4216 | EPS Materials | EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous...view more EPS® 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water/humidity resistance. Coatings using EPS® 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous metals, and various plastics. view less | Request Sample |
| EPS® 9147 | EPS Materials | EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stabilit...view more EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stability should be preformed. This is a permanent coalescent that remains in the paint film and should not be stored in PVC containers or piping for extended periods of time. view less | Request Sample |
| ExacTint® | EPS Materials | ExacTint® is an in-plant colorant in a modified alkyd vehicle in mineral spirits. It is useful in most conventional alkyd coatings systems for architectural or industrial applications. | Request Sample |
| Forton® VF 774 | EPS Materials | Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be sta...view more Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite. view less | Request Sample |
| Forton® VF 812 | EPS Materials | Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific a...view more Forton® VF 812 is a water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific alpha hemi-hydrate gypsums and dry melamine resin, Forton® VF-812 at proper loadings, results in a product suitable for interior and exterior use. view less | Request Sample |
| NovoColor® HP II | EPS Materials | NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications...view more NovoColor® HP II is the next generation of waterborne pigment dispersions specifically engineered for use in decorative and waterborne industrial coatings systems to help formulators meet stringent VOC restrictions. Designed for point of sale applications. view less | Request Sample |
| NovoColor® II | EPS Materials | NovoColor® II is a low VOC universal colorant designed for point of sales usage in decorative and light industrial coatings. Formulated without APEO or ethylene and propylene glycols. | Request Sample |
| NovoColor® IP | EPS Materials | NovoColor® IP is a broadly compatibile, in-plant colorant for waterborne decorative and industrial coating applications. Non-VOC and formulated without APEO or ethylene and propylene glycols. | Request Sample |
| NovoColor® SF | EPS Materials | NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These col...view more NovoColor® SF waterborne dispersions are designed for in-plant tinting of coatings and stains where a high degree of color transparency is desired. Composed of high quality, lightfast pigments, it offers excellent color stability and uniformity. These colorants are controlled to very stringent color and opacity standards, and give the user batch to batch appearance uniformity. view less | Request Sample |
| OptiColor® XP | EPS Materials | OptiColor® XP are high performance, industrial colorants for point of sales and in-plant solventborne coating systems. | Request Sample |
| Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan RB 1150 | Baxenden Chemicals Ltd. | Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and floori...view more Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and flooring markets. view less | |
| Quasilan RB 1943 | Baxenden Chemicals Ltd. | Quasilan RB 1943, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Quasilan RB 1943 has applications in DIY and flooring markets and 2-K sealants and coatings. | |
| Quasilan RB 1999 | Baxenden Chemicals Ltd. | Quasilan RB 1999, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. This product is mainly used in 2-K sealants and coatings. | |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...view more Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). view less | |
| Trixene BI 200 | Baxenden Chemicals Ltd. | Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 201 | Baxenden Chemicals Ltd. | Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...view more Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 220 | Baxenden Chemicals Ltd. | Trixene BI 220 is a nonionic aqua blocked isocyanate dispersion that is designed for water-based 1 and 2-K systems. This product can be used as an adhesion promoter and cross-linker for finishes and coatings on leather, paper, textiles, and more. | |
| Trixene BI 7641 | Baxenden Chemicals Ltd. | Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...view more Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7674 | Baxenden Chemicals Ltd. | Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7675 | Baxenden Chemicals Ltd. | Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7950 | Baxenden Chemicals Ltd. | Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7951 | Baxenden Chemicals Ltd. | Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...view more Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7960 | Baxenden Chemicals Ltd. | Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...view more Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7961 | Baxenden Chemicals Ltd. | Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...view more Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7963 | Baxenden Chemicals Ltd. | Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7982 | Baxenden Chemicals Ltd. | Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7991 | Baxenden Chemicals Ltd. | Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7992 | Baxenden Chemicals Ltd. | Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene SC 7702 | Baxenden Chemicals Ltd. | Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...view more Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7703 | Baxenden Chemicals Ltd. | Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...view more Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7707 | Baxenden Chemicals Ltd. | Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...view more Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...view more Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7722 | Baxenden Chemicals Ltd. | Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7725 | Baxenden Chemicals Ltd. | Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7902 | Baxenden Chemicals Ltd. | Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...view more Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. view less | |
| Trixene SC 7930 | Baxenden Chemicals Ltd. | Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...view more Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. view less | |
| Trixene SC 7931 | Baxenden Chemicals Ltd. | Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| 100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) | EPS Materials | 100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) formulation information. | |
| 100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) | EPS Materials | 100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) formulation information. | |
| 100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) | EPS Materials | 100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) formulation information. | |
| 100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1) | EPS Materials | This is a 100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1). | |
| ≤275 G/L Satin Varnish (Formulation #EPS 4431BT4) | EPS Materials | This is a ≤275 G/L Satin Varnish (Formulation #EPS 4431BT4). | |
| 40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) | EPS Materials | 40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) formulation information. | |
| Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1) | EPS Materials | This is a Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1). | |
| C-1315 Cure and Seal (Formulation #EPS 2272 CS1) | EPS Materials | This is a C-1315 Cure and Seal (Formulation #EPS 2272 CS1). | |
| C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2) | EPS Materials | This is a C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2). | |
| Cherry Interior Wiping Stain (Formulation #EPS 2545 STN1) | EPS Materials | Cherry Interior Wiping Stain (Formulation #EPS 2545 STN1) formulation information. | |
| Clear Interior Topcoat with EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. |
