| Surfadol® 541DPM Surfactant | ACME | Surfadol® 541DPM is a 50% active liquid in Dipropylene Glycol Monomethyl Ether. It is a nonionic acetylenic diol molecule, which have a central hydrophilic moiety blocked by two hydrophobic ends. Surfadol® 541DPM is a white, waxy solid at room temperature...view more Surfadol® 541DPM is a 50% active liquid in Dipropylene Glycol Monomethyl Ether. It is a nonionic acetylenic diol molecule, which have a central hydrophilic moiety blocked by two hydrophobic ends. Surfadol® 541DPM is a white, waxy solid at room temperature but is also supplied in various solvent carriers for convenience and ease of use. view less | |
| EPOTUF® 38-694 | Polynt Composites | EPOTUF® 38-694 is an aqueous dispersion of an epoxy ester resin that can be used in industrial maintenance coatings, baking enamels, industrial primers and enamels, and printing inks. This product is designed to formulate with lower co-solvent demands tha...view more EPOTUF® 38-694 is an aqueous dispersion of an epoxy ester resin that can be used in industrial maintenance coatings, baking enamels, industrial primers and enamels, and printing inks. This product is designed to formulate with lower co-solvent demands than standard water-reducible epoxy resins. This product features HAP-free solvents and dries rapidly. view less | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...view more Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of ap...view more AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
| TROYTHIX™ 704 SSA | Arxada – Troy Corporation | TROYTHIX™ 704 SSA is a highly effective particle suspension agent for both solvent and water reducible formulations. Supplied as a free- flowing powder, TROYTHIX™ 704 SSA has a minimal effect on the application viscosity of the system. This is particularl...view more TROYTHIX™ 704 SSA is a highly effective particle suspension agent for both solvent and water reducible formulations. Supplied as a free- flowing powder, TROYTHIX™ 704 SSA has a minimal effect on the application viscosity of the system. This is particularly advantageous for industrial applications as well as trade sales systems such as pigmented stains and aerosols. view less | Request Sample |
| HDK® T30 | Wacker Chemical Corporation | HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, pr...view more HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. view less | Request Sample |
| Pansil UltraSpheres™ 4000 | Tolsa SA | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marin...view more Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. view less | |
| AGITAN® 260 | Munzing Chemie | AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to...view more AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| EPOTUF® 91-263 | Polynt Composites | EPOTUF® 91-263 is a water-reducible epoxy ester formulated without HAPs, which is designed for used in VOC-compliant coatings after it has been neutralized with the proper amines. It can also be used in printing inks. This product provides good corrosion ...view more EPOTUF® 91-263 is a water-reducible epoxy ester formulated without HAPs, which is designed for used in VOC-compliant coatings after it has been neutralized with the proper amines. It can also be used in printing inks. This product provides good corrosion resistance and dries quickly. It adheres well to a variety of substrates, including polypropylene. view less | |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...view more AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. view less | Request Sample |
| HDK® N20 | Wacker Chemical Corporation | HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is app...view more HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...view more Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. view less | |
| HDK® T40 | Wacker Chemical Corporation | HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickenin...view more HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. view less | Request Sample |
| CARBODILITE V-02B | GSI Exim America, Inc. | CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodi...view more CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. This product is a clear pale yellow viscous liquid. view less | |
| AGITAN® 265 | Munzing Chemie | AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal soluti...view more AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| AGITAN® 361 | Munzing Chemie | AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is...view more AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is ideal for clear coats, non-pigmented and low viscous systems. It is commonly used in adhesives, and architectural, industrial and wood coatings. view less | |
| METOLAT® 355 | Munzing Chemie | METOLAT® 355 is a yellow liquid wetting agent for aqueous systems. With low foam tendencies, it is suitable for many aqueous systems. Due to its nonionic character METOLAT® 355 is compatible with many different raw materials with broad pH stability. It pr...view more METOLAT® 355 is a yellow liquid wetting agent for aqueous systems. With low foam tendencies, it is suitable for many aqueous systems. Due to its nonionic character METOLAT® 355 is compatible with many different raw materials with broad pH stability. It provides excellent pigment and substrate wetting. METOLAT® 355 improves pigment compatibility and leveling in emulsion paints and water reducible systems. view less | |
| Acrylamac® 232-1185 | Polynt Composites | Acrylamac® 232-1185 is a water reducible solution acrylic designed for industrial electrocoating or dip tanks where chemical, stain and corrosion resistance are required. This resin provides stable low VOC systems when crosslinked with melamine, urea or e...view more Acrylamac® 232-1185 is a water reducible solution acrylic designed for industrial electrocoating or dip tanks where chemical, stain and corrosion resistance are required. This resin provides stable low VOC systems when crosslinked with melamine, urea or epoxy resins. It features hard films with excellent gloss and performance properties. Manufactured in North America. All components of this product are listed on the DSL. view less | |
| KELSOL® 585-W-43 | Polynt Composites | KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be ...view more KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be used in fast air-dry or force-dry industrial primers, enamels, and clear finishes. view less | |
| Epotec® TW 5002 | Aditya Birla | Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improve...view more Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, adhesives, and textile binders. view less | |
| Epotec® TW 5003H | Aditya Birla | Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improv...view more Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in protective coatings for steel & concrete, adhesives, fiber sizing applications, and textile binders. view less | |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...view more CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. view less | |
| EBECRYL® 450 | Allnex | EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with hig...view more EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). EBECRYL® 450 is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive. view less | Request Sample |
| EBECRYL® 870 | Allnex | EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivi...view more EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). It is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive. view less | Request Sample |
| SR540 | Sartomer Americas | SR540, ethoxylated(4) bisphenol A diimethacrylate is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance. Performance properties include: water and chemical resistance, flexibility, adhes...view more SR540, ethoxylated(4) bisphenol A diimethacrylate is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance. Performance properties include: water and chemical resistance, flexibility, adhesion, low shrinkage, hardness; abrasion resistance, heat resistance and impact strength. Suggested applications include: anaerobic adhesives; elastomers; coatings, concrete polymers; dental polymers, photoresists electronics; photopolymer, flexo and gravure inks, plastisols, and sealants. view less | |
| OPTIGEL® LX | BYK | OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in wat...view more OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in water reducible (cosolvent) systems. It can be used alone or in combination with cellulosic materials to improve pigment suspension and to impart dripless application properties. view less | Request Sample |
| Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
| Busperse® 282 | Buckman Laboratories, Inc. | Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...view more Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. view less | |
| Busperse® 284 | Buckman Laboratories, Inc. | Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...view more Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. view less | |
| SILIKOPHEN® P 40/W | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 40/W is a non-ionic dispersion, methylphenyl polysiloxane resin produced for heat-resistant decorative coatings. It has the appearance of a white, turbid liquid and is focused on high-temperature anti-corrosion coatings for mufflers, ovens, ...view more SILIKOPHEN® P 40/W is a non-ionic dispersion, methylphenyl polysiloxane resin produced for heat-resistant decorative coatings. It has the appearance of a white, turbid liquid and is focused on high-temperature anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. Some special features of SILIKOPHEN® P 40/W include excellent air-drying properties, water-reducible, and has good compatibility with organic polymer emulsions. view less | Request Sample |
| OPTIGEL® WX | BYK | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...view more OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. view less | Request Sample |
| OPTIGEL® WX | Univar Solutions | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...view more OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. view less | Request Sample |
| Resiflow® PH-240 | Estron Chemical, Inc. | Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat a...view more Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat adhesion and wetting on hydrophilic substrates such as sandblasted or unpolished metal. Resiflow® PH-240 can also improve or eliminate surface defects including orange peel, pinholes and craters. view less | |
| TAMOL™ 1124 | Univar Solutions | TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additiv...view more TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additives, along with good viscosity, flow and wet adhesion. It is a universal dispersant for compatibility with associative rheology modifiers as it is compatible with both anionic HASE and nonionic HEUR rheology modifiers. view less | Request Sample |
| EBECRYL® 657 | Allnex | EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. It provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, ...view more EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. It provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL® 436 or EBECRYL® 438 to increase cure speed. EBECRYL® 657 is recommended for: lithographic inks and varnishes, coatings on paper, metal, and plastic, and pigment grinding vehicles. view less | Request Sample |
| RHEOLATE® 299 | Elementis | RHEOLATE® 299 rheological additive is a 25% active aqueous polyether polyurethane associative thickener (NISAT) designed for waterborne industrial and decorative, pigmented and clear, gloss and high gloss coating systems. This rheology modifier is a highl...view more RHEOLATE® 299 rheological additive is a 25% active aqueous polyether polyurethane associative thickener (NISAT) designed for waterborne industrial and decorative, pigmented and clear, gloss and high gloss coating systems. This rheology modifier is a highly efficient viscosity builder in the low- to mid-shear rate range. It provides strongly shear thinning flow behaviour which makes it ideal for spray applications including sprayed latex emulsions, dispersions, water reducible clear-coats and high gloss pigmented systems. view less | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and a...view more AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
| CARBODILITE™ V-02 | GSI Exim America, Inc. | CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne ure...view more CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. view less | |
| Busperse® 275 | Buckman Laboratories, Inc. | Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 17...view more Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 173.310 of the U.S. Food and Drug Administration regulations. This product is a yellow-orange liquid, and it may be used in coatings at levels between 0.3% and 1.0%, based on total weight of the formulation. view less | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...view more Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. view less | |
| OPTIGEL® CK | BYK | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...view more OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. view less | Request Sample |
| OPTIGEL® CK | Univar Solutions | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...view more OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. view less | Request Sample |
| BYK®-081 | BYK | BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly...view more BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly suitable for high solid alkyd systems in the architectural coatings sector. The additive shows good compatibility with clear coatings. BYK®-081 is not suitable for aqueous systems that contain little or no organic solvent as co-solvent. view less | Request Sample |
| W2K-2000 | US Polymers - Accurez LLC | W2K-2000 is a water reducible polyester polyol designed for use with isocyanate prepolymers in the development of two component, water based urethane coatings. Unlike other chemistries, this polyol is supplied at 100% nonvolatile, thus providing greater f...view more W2K-2000 is a water reducible polyester polyol designed for use with isocyanate prepolymers in the development of two component, water based urethane coatings. Unlike other chemistries, this polyol is supplied at 100% nonvolatile, thus providing greater formulation latitude and cost effective form of supply. In addition, W2K-2000 offers excellent emulsification and compatibility with conventional isocyanate crosslinkers. Special water dispersible isocyanates are not recommended for use in this system. Suggested use in modifying polyols for flexibility. view less | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | Request Sample |
| CARBODILITE™ V-02-L2 | GSI Exim America, Inc. | CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/...view more CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. view less | |
| RAYREZ® 66 | Specialty Polymers, Inc. | RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial ...view more RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial coatings and has a low co-solvent demand. RAYREZ® 66 is primarily used to blend with water reducible alkyds to enhance coating performance and reduce VOC. RAYREZ® 66 provides resistance to chemical abrasion and scratches to surfaces that it is applied to. view less | |
| Butrol® 22 | Buckman Laboratories, Inc. | Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, ...view more Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, such as conventional alkyds, urethanes, and epoxies. Because Butrol® 22 can be used across this full range of systems, it can replace several anticorrosive pigments, simplifying formulating and lowering inventory costs. This product is based on barium metaborate monohydrate and has been optimized for corrosion applications. view less | |
| CARBODILITE™ V-10 | GSI Exim America, Inc. | CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water ...view more CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water resistance, chemical resistance and adhesion will be improved. This mutifunctional polycarbodiimide appears as a clear pale yellow liquid. The CARBODILITE™ Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. view less | |
| Busperse® 229 | Buckman Laboratories, Inc. | Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better we...view more Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better wetting of the substrate by the binder, reducing moisture permeability of the paint film. This product should be added with water prior to the addition of wetting agents and pigments. The pigment slurry should be dispersed at high speed, cooled and let down with the water-reducible alkyd binder. view less | |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| Sunsorb-5151 | Yantai Suny Chem International Co., Ltd. | Sunsorb-5151 is a is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer(HALS).It has been designed to fulfill high cost/performance and durability requirements of exterior waterb...view more Sunsorb-5151 is a is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer(HALS).It has been designed to fulfill high cost/performance and durability requirements of exterior waterborne and solvent borne industrial and decorative coatings. The broad UV absorbance of the used UVA makes it suitable for a wide range of coatings for wood, plastics and metal .The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination and color change and provides full substrate protection. view less | |
| TINUVIN® 5151 | BASF Dispersions & Resins | TINUVIN 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solvent...view more TINUVIN 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solventborne industrial and decorative coatings. The broad UV absorbance of the used UVA of TINUVIN 5151 makes it suitable for a wide range of coatings for wood, plastics, and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. view less | |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking chara...view more AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification. view less | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AERO...view more AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AEROSIL® R 974 to enrich at water and oil interfaces and thereby stabilize water droplets in a continuous oil phase by the Pickering effect. AEROSIL® R 974 is PCPC-listed as 'Silica dimethyl silylate'. The product is also very suitable for rheology control as well as an oil thickener. view less | Request Sample |
| CARBODILITE™ V-04 | GSI Exim America, Inc. | CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch re...view more CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. Properties such as hydrolysis stability, adhesion, water, and chemical resistance are improved. view less | |
| Permax™ 4399 | Lubrizol Advanced Materials, Inc. | Permax™ 4399 is a high performance, hydrophilic compound that can provide a number of unique properties such as enhanced comfort, cooling, wicking, air-flow, wash-durability and cost-value performance vs. competing coatings. These performance characterist...view more Permax™ 4399 is a high performance, hydrophilic compound that can provide a number of unique properties such as enhanced comfort, cooling, wicking, air-flow, wash-durability and cost-value performance vs. competing coatings. These performance characteristics are partially dependent on the base textile substrate being coated and the application technique. This ready-to-use, water-borne, urethane based compound forms a soft, flexible film which has excellent adhesion to a variety of substrates including cotton, polyester, nylon and blends. This material can be used on knit, woven, or non-woven substrates. view less | |
| Jaylink® 106E | Bomar, formerly Dymax Oligomers & Coatings | Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasio...view more Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotropic characteristics, which are particularly useful in improving UV ink holdout on porous substrates, without sacrificing cured properties. This material is INCI listed for use in the cosmetic industry. view less | |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...view more EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. view less | Request Sample |
| Bubreak® 4400 | Buckman Laboratories, Inc. | Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Adminis...view more Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4400 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. This product is effective in a wide range of resins, including acrylics, vinyl acrylics, poly vinyl acetates, and water-reducible alkyds. view less | |
| Bubreak® 454C | Buckman Laboratories, Inc. | Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and ...view more Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 454C has been designed to perform as both an antifoam, fighting foam formulation, and as a defoamer, breaking down existing foam. It is effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| ULTRAPEG® 8000 | Indorama Ventures | ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of...view more ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of 12.5-16.0mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points, and hardness consistency. This product is ideally used for adhesives, agrochemicals, rubber, ceramic, and detergents. ULTRAPEG® 8000 may also be used products for makeup (lipsticks, shadows, foundations). view less | |
| Polyglykol M 1000 | Clariant - Coatings & Construction Chemicals | Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 970 - 1060g/mol. It is a waxy white to slightly yellowish solid at room temperature. Polyglykol M 1000 can be considered as high molecular alcohol and therefore displays t...view more Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 970 - 1060g/mol. It is a waxy white to slightly yellowish solid at room temperature. Polyglykol M 1000 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| Polyglykol M 3000 | Clariant - Coatings & Construction Chemicals | Polyglykol M 3000 is a polyethylenglycolmonomethylether with a molecular weight of 2850 - 3150g/mol. It is a waxy white to slightly yellowish solid at room temperature with only very light smell. Polyglykol M 3000 is available as melt supplied in heated t...view more Polyglykol M 3000 is a polyethylenglycolmonomethylether with a molecular weight of 2850 - 3150g/mol. It is a waxy white to slightly yellowish solid at room temperature with only very light smell. Polyglykol M 3000 is available as melt supplied in heated tank trucks or as remeltable solid in steel drums. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| Colortrend® Unipearl® 835-0134 | Chromaflo Technologies | Colortrend® Unipearl® 835-0134 is a Pearlescent Silver pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear...view more Colortrend® Unipearl® 835-0134 is a Pearlescent Silver pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose lacquers, epoxy alkyd, acrylic latex, catalyzed and water reducible urethane coatings. view less | Request Sample |
| Chroma-chem® 895-0005 | Chromaflo Technologies | Chroma-chem® 895-0005 is a Titanium White industrial pigment with the CI Name PW 6. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC ...view more Chroma-chem® 895-0005 is a Titanium White industrial pigment with the CI Name PW 6. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0405 | Chromaflo Technologies | Chroma-chem® 895-0405 is a Quinacridone Red industrial pigment with the CI Name PW 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low V...view more Chroma-chem® 895-0405 is a Quinacridone Red industrial pigment with the CI Name PW 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0724 | Chromaflo Technologies | Chroma-chem® 895-0724 is a Organic Red industrial pigment with the CI Name PR 254. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-0724 is a Organic Red industrial pigment with the CI Name PR 254. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0905 | Chromaflo Technologies | Chroma-chem® 895-0905 is a Lead-Free Orange industrial pigment with the CI Name PO 34/PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are...view more Chroma-chem® 895-0905 is a Lead-Free Orange industrial pigment with the CI Name PO 34/PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0975 | Chromaflo Technologies | Chroma-chem® 895-0975 is a Medium Orange industrial pigment with the CI Name PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC ...view more Chroma-chem® 895-0975 is a Medium Orange industrial pigment with the CI Name PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1006 | Chromaflo Technologies | Chroma-chem® 895-1006 is a Red Oxide industrial pigment with the CI Name PR 101. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-1006 is a Red Oxide industrial pigment with the CI Name PR 101. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1305 | Chromaflo Technologies | Chroma-chem® 895-1305 is a Burnt Umber industrial pigment with the CI Name PBR 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC an...view more Chroma-chem® 895-1305 is a Burnt Umber industrial pigment with the CI Name PBR 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1806 | Chromaflo Technologies | Chroma-chem® 895-1806 is a Yellow Oxide industrial pigment with the CI Name PY 42. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-1806 is a Yellow Oxide industrial pigment with the CI Name PY 42. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-2605 | Chromaflo Technologies | Chroma-chem® 895-2605 is an Organic Yellow industrial pigment with the CI Name PY 175. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low V...view more Chroma-chem® 895-2605 is an Organic Yellow industrial pigment with the CI Name PY 175. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-5505 | Chromaflo Technologies | Chroma-chem® 895-5505 is a Phthalo Green industrial pigment with the CI Name PG 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-5505 is a Phthalo Green industrial pigment with the CI Name PG 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-7205 | Chromaflo Technologies | Chroma-chem® 895-7205 is a Phthalo Blue industrial pigment with the CI Name PB 15:2. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC...view more Chroma-chem® 895-7205 is a Phthalo Blue industrial pigment with the CI Name PB 15:2. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9406 | Chromaflo Technologies | Chroma-chem® 895-9406 is a Quinacridone Violet industrial pigment with the CI Name PV 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are lo...view more Chroma-chem® 895-9406 is a Quinacridone Violet industrial pigment with the CI Name PV 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9905 | Chromaflo Technologies | Chroma-chem® 895-9905 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-9905 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9906 | Chromaflo Technologies | Chroma-chem® 895-9906 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-9906 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Colortrend® Unipearl® 835-1234 | Chromaflo Technologies | Colortrend® 835-1234 is a Pearlescent Gold pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and w...view more Colortrend® 835-1234 is a Pearlescent Gold pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose lacquers, epoxy alkyd, acrylic latex, catalyzed and water reducible urethane coatings. view less | Request Sample |
| Colortrend® Unipearl® 835-1734 | Chromaflo Technologies | Colortrend® Unipearl® 835-1734 is a Pearlescent Copper Penny pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both...view more Colortrend® Unipearl® 835-1734 is a Pearlescent Copper Penny pearlescent colorant in the Chromaflo™ Unipearl® 835 Series. These patented, universal, machine dispensable pearlescent colorants are for use in special effect finishes. They can be used in both clear alkyd and water-based coatings. They can be used either by themselves in a glaze or neutral base over a colored substrate or in combination with Colortrend® colorants. Unipearl® colorants are designed for use in faux finishes, decorative coatings, wall coverings and specialty finishes. They are compatible with nitrocellulose lacquers, epoxy alkyd, acrylic latex, catalyzed and water reducible urethane coatings. view less | Request Sample |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| W1K-1000 | US Polymers - Accurez LLC | W1K-1000 is 45% NV water reducible polyester polyol intended for use in a single package system. This polyester polyol is supplied at 45% non-volatile in water and n-Methyl Pyrrolidone. Conventional melamine or urea-formaldehyde crosslinking resins like h...view more W1K-1000 is 45% NV water reducible polyester polyol intended for use in a single package system. This polyester polyol is supplied at 45% non-volatile in water and n-Methyl Pyrrolidone. Conventional melamine or urea-formaldehyde crosslinking resins like hexamethoxy methyl melamine are recommended. The need for special melamines is not necessary. Other crosslinkers that may find use, are blocked isocyanate resins designed for water based systems. When properly formulated and processed, W1K-1000 can produce VOC compliant, melamine crosslinked baking enamels with an excellent balance of hardness , flexibility and adhesion over a variety of substrates. view less | Request Sample |
| W2K-2002 | US Polymers - Accurez LLC | W2K-2002 is 90% NV water reducible polyester polyol designed for use with aliphatic isocyanate prepolymers in the formulation of performance, two component water based urethane coatings. This polyol represents the latest introduction to our line of low VO...view more W2K-2002 is 90% NV water reducible polyester polyol designed for use with aliphatic isocyanate prepolymers in the formulation of performance, two component water based urethane coatings. This polyol represents the latest introduction to our line of low VOC polyester polyols for water based systems, and is the first to possess the formulating latitude to produce coatings with dry times and coatings comparable to conventional solvent based urethanes. In addition, this technology allows the formulator to achieve a dry film thickness of 3 – 4 mils without any of the out-gassing observed with other water based polyol technologies. view less | Request Sample |
| CAB-O-SIL® M7D | Univar Solutions | CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone r...view more CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL M-7D fumed silica, further modification of its surface is necessary to prevent crepe hardening. view less | Request Sample |
| CAB-O-SIL® MS75D | Univar Solutions | CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silic...view more CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL MS-75D fumed silica, further modification of its surface is necessary to prevent crepe hardening. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | Request Sample |
| ULTRAPEG® 1000 | Indorama Ventures | ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a wa...view more ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a water content of 0.5% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, textiles, and paints. ULTRAPEG® 1000 may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps view less | |
| ULTRAPEG® 6000 F | Indorama Ventures | ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value ...view more ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value of 17-20mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, detergents and lubricants. ULTRAPEG® 6000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) and soap. view less | |
| Polyglykol M 350 PU | Clariant - Coatings & Construction Chemicals | Polyglykol M 350 PU is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. For special applications (polyurethanes) a product marked Polyglykol M 350 PU with low alkali content (< 10 mg/kg) and low water content (< 0,1 %) is avail...view more Polyglykol M 350 PU is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. For special applications (polyurethanes) a product marked Polyglykol M 350 PU with low alkali content (< 10 mg/kg) and low water content (< 0,1 %) is available. The pH-value of this special type is between 3 – 5. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| Polyglykol M 500 PU | Clariant - Coatings & Construction Chemicals | Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 470 – 530g/mol. It is a clear neutral liquid at room temperature. This grade is used for special applications (polyurethanes) because of its low alkali content (< 10 mg/kg...view more Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 470 – 530g/mol. It is a clear neutral liquid at room temperature. This grade is used for special applications (polyurethanes) because of its low alkali content (< 10 mg/kg). The pH value of this special type is between 3 – 5. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| Chroma-chem® 895-2505 | Chromaflo Technologies | Chroma-chem® 895-2505 is a L/F Medium Yellow industrial pigment with the CI Name PY 83/PY 15. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They ar...view more Chroma-chem® 895-2505 is a L/F Medium Yellow industrial pigment with the CI Name PY 83/PY 15. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...view more Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. view less | |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| Bubreak® 4419 | Buckman Laboratories, Inc. | Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances app...view more Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances approved for use under 21 CFR § 176.200 and 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water- and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4419 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. The product has proven effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| TROYSOL™ Z370 | Arxada – Troy Corporation | TROYSOL™ Z370 is a high performance substrate wetting and mar/slip additive for solvent, water-reducible and aqueous systems. It improves the wetting of low surface energy and contaminated substrates, resulting in uniform film coverage. This product enhan...view more TROYSOL™ Z370 is a high performance substrate wetting and mar/slip additive for solvent, water-reducible and aqueous systems. It improves the wetting of low surface energy and contaminated substrates, resulting in uniform film coverage. This product enhances surface flow and leveling and stabilizes surface tension gradients upon application and during care. It also helps prevent surface defects such as craters, pinholes, and orange peel. The surface slip is increased and the gloss is improved when used in most coating systems. This product can be used in a variety of applications, including automotive, transportation, OEM, general industrial, furniture finishes, radiation curable, printing inks and over print varnishes where wetting and/or block resistance is required. view less | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd ...view more HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. view less | Request Sample |
| HALOX® Z-Plex 250 | ICL Phosphate Specialty | HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It ...view more HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It shows a high degree of versatility due to its narrow particle size distribution. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 250 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended dosage level is 5-10% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| ULTRAPEG® 200 | Indorama Ventures | ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 5...view more ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 535-590mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for leathers, detergents, lubricants, and paints. ULTRAPEG® 200 may also be used in bath oils, creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, hair spray and fragrances. view less | |
| ULTRAPEG® 300 | Indorama Ventures | ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 3...view more ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 356-394mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for agrochemical, ceramic, leathers, lubricants, paints, textiles, and paints. ULTRAPEG® 300 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, shampoos, deodorant and hair spray. view less |
