| TROYKYD® D729 | Arxada – Troy Corporation | TROYKYD® D729 is a hydrophobic silica dispersed in a hydrocarbon polymer base. Water-based maintenance and traffic paints, industrial air-dry enamels, acrylic copolymer architectural latex paints, water-based gravure inks advantages are that it is easily pre-dispersed in water, let-down requires little or no defoamer...view more TROYKYD® D729 is a hydrophobic silica dispersed in a hydrocarbon polymer base. Water-based maintenance and traffic paints, industrial air-dry enamels, acrylic copolymer architectural latex paints, water-based gravure inks advantages are that it is easily pre-dispersed in water, let-down requires little or no defoamer addition excellent bubble-break after oven-aging test produces smooth films with no crawling or craters. view less | Request Sample |
| Bubreak® 448 | Buckman Laboratories, Inc. | Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric...view more Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings) of the U.S. Food and Drug Administration regulations. Bubreak® 448 can be dispensed directly from shipping containers by chemical-metering pumps or suitable measuring containers. To prevent deterioration of the product, keep drum closed when not in use. Contamination with water or other extraneous materials should be avoided. For the best control of foam, Bubreak® 448 should be added as near to the point of foam formation as possible. It should also be added where there is vigorous mixing action. view less | |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...view more Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. view less | Request Sample |
| AGITAN® 260 | Munzing Chemie | AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to...view more AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| AGITAN® 381 | Munzing Chemie | AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented sys...view more AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented systems and low viscosity systems. It is commonly used for adhesives, printing inks, and architectural, industrial, wood and automotive coatings. view less | |
| AGITAN® DF 691 | Munzing Chemie | AGITAN® DF 691 is a liquid brown, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and is has good versatility, compatibility, has good efficiency, and is effective over a wide pH range....view more AGITAN® DF 691 is a liquid brown, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and is has good versatility, compatibility, has good efficiency, and is effective over a wide pH range. It is commonly used in adhesives, printing inks, and architectural coatings and plasters. view less | |
| ADDAPT® Foamstop™ SL 100 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cuttin...view more ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems. view less | |
| FOAMASTER® MO 2190 | BASF Formulation Additives | FOAMASTER® MO 2190 is a 100% active, liquid defoamer. FOAMASTER® MO 2190 was specially designed to optimize effectiveness, persistence and compatibility in latex based adhesives. It has also proven effective in certain latex-based coating and ink applicat...view more FOAMASTER® MO 2190 is a 100% active, liquid defoamer. FOAMASTER® MO 2190 was specially designed to optimize effectiveness, persistence and compatibility in latex based adhesives. It has also proven effective in certain latex-based coating and ink applications. FOAMASTER® MO 2190 has also been designed to have good film compatibility, which translates to clear, defect-free films. view less | |
| TEGO® Foamex 835 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 835 is a defoamer emulsion with utmost effectiveness. It is a white, thixotropic liquid emulsion of a dimethyl polysiloxane which contains fumed silica. TEGO® Foamex 835 shows very strong defoaming, especially for pigmented high-viscosity for...view more TEGO® Foamex 835 is a defoamer emulsion with utmost effectiveness. It is a white, thixotropic liquid emulsion of a dimethyl polysiloxane which contains fumed silica. TEGO® Foamex 835 shows very strong defoaming, especially for pigmented high-viscosity formulations. It is suitable for brush/roller applications, flexo/gravure printing, and compressed air and airless spraying. It is also suitable for pigmented and waterborne systems. view less | Request Sample |
| PEL-SIL CL400 | Ele Corporation | PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems throug...view more PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems. view less | |
| AGITAN® A206E | Munzing Chemie | AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acry...view more AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, and industrial water-based and wood coatings, as well as traffic paint. view less | |
| ADDAPT® Foamstop™ 150N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective ...view more ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH range. view less | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME | Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a...view more Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a number of solvent cuts as well as powdered forms. It is silicone and APE-free. view less | |
| DOWSIL™ 7 Additive | Univar Solutions | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | Request Sample |
| DOWSIL™ 7 Additive | Dow Performance Silicones | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 74 Additive | Univar Solutions | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | Request Sample |
| DOWSIL™ 74 Additive | Dow Performance Silicones | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | |
| FOAMSTAR® ED 2526 | BASF Formulation Additives | FOAMSTAR® ED 2526 is a defoamer in various water-based coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. FOAMSTAR® ED 2526 was de...view more FOAMSTAR® ED 2526 is a defoamer in various water-based coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. FOAMSTAR® ED 2526 was developed for water-based industrial coatings. It is recommended for use in coatings based on alkyd resin solutions and alkyd resin emulsions. view less | |
| ADDAPT® Foamstop™ WS 17 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint,...view more ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint, printing ink, floor polish, and other applications. view less | |
| AGITAN® 265 | Munzing Chemie | AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal soluti...view more AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| AGITAN® 361 | Munzing Chemie | AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is...view more AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is ideal for clear coats, non-pigmented and low viscous systems. It is commonly used in adhesives, and architectural, industrial and wood coatings. view less | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...view more ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. view less | |
| TEGO® Foamex 3062 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 3062 is highly effective defoamer concentrate for waterborne systems. It is a slightly hazy liquid polyether siloxane copolymer containing fumed silica. TEGO® Foamex 3062 has a very strong defoaming and foam-destruction effect in millbases an...view more TEGO® Foamex 3062 is highly effective defoamer concentrate for waterborne systems. It is a slightly hazy liquid polyether siloxane copolymer containing fumed silica. TEGO® Foamex 3062 has a very strong defoaming and foam-destruction effect in millbases and high-viscosity formulations. It is highly suitable for flexo and gravure printing as well as brush and roller applications. It can also be applied with airless spraying. view less | Request Sample |
| TEGO® Foamex 8030 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8030 is a highly effective defoamer emulsion for waterborne systems, especially for a PVC range of 20 to 60%. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. TEGO® Foamex 8030 has very st...view more TEGO® Foamex 8030 is a highly effective defoamer emulsion for waterborne systems, especially for a PVC range of 20 to 60%. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. TEGO® Foamex 8030 has very strong defoaming, especially for pigmented high-viscosity formulations. It is suitable for brush and roller applications as well as compressed air spraying and flexo/gravure printing. view less | Request Sample |
| TEGO® Foamex 840 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 840 is a highly effective defoamer concentrate with excellent long-term persistance. It is a silica-free, clear liquid polyether siloxane copolymer. TEGO® Foamex 840 has strong defoaming characteristics for use in millbase and at the let-down...view more TEGO® Foamex 840 is a highly effective defoamer concentrate with excellent long-term persistance. It is a silica-free, clear liquid polyether siloxane copolymer. TEGO® Foamex 840 has strong defoaming characteristics for use in millbase and at the let-down stage. It has good long-term effectiveness for flooring and brush/roller applications. It is also suitable for flexo/gravure printing and compressed air spraying applications. view less | Request Sample |
| AGITAN® A208 | Munzing Chemie | AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood...view more AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood, industrial water-based and architectural coatings, as well as pigment grinding and metallic printing inks, and wood glue and construction adhesives. view less | |
| PAT-ADD AF 62 | Patcham USA | PAT-ADD AF 62 is silicone free defoaming and de-aerating additive for solvent borne coatings. It is a very strong defoamer for wood-coatings and clear lacquers. Main benefits are: choice for varnishes and paints with low pigmentation, strong de-airing pro...view more PAT-ADD AF 62 is silicone free defoaming and de-aerating additive for solvent borne coatings. It is a very strong defoamer for wood-coatings and clear lacquers. Main benefits are: choice for varnishes and paints with low pigmentation, strong de-airing properties, requires only low dosages, easy to dose, silicone free, so minimal risk of side effects such as adhesion failure, and inert, wide range of compatibility. view less | Request Sample |
| TEGO® Airex 901 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901...view more TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901 W is used particularly for waterborne and high viscosity formulations. It is also recommended for flexo and gravure printing, and to be applied by brush, roller, or airless spraying. view less | Request Sample |
| ADDAPT® Foamstop™ 666K | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective o...view more ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH range and a high temperature range. view less | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...view more ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. view less | |
| ADDAPT® Foamstop™ VF 35N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, l...view more ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. view less | |
| ADDAPT® Foamstop™ VF 60 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster...view more ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. view less | |
| EFKA® PB 2770 | BASF Formulation Additives | EFKA® PB 2770 is a silicone-free deaerator and defoamer for UV-curable formulations, composites, gel coats, cast resins and adhesives. The product provides an outstanding compatibility. It is recommended for use in clear and pigmented radiation curable fo...view more EFKA® PB 2770 is a silicone-free deaerator and defoamer for UV-curable formulations, composites, gel coats, cast resins and adhesives. The product provides an outstanding compatibility. It is recommended for use in clear and pigmented radiation curable formulations (e.g. overprint varnishes, UV inkjet) as well as for solvent-free unsaturated polyester systems and for pultrusion applications with acrylic, unsaturated polyester and vinylester resins. It is silicone-free and therefore provides excellent recoatability. view less | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperf...view more WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperfections. This product appears as a clourless, low viscous liquid. view less | |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | Request Sample |
| SILCOLAPSE 621 | Elkem Silicones | SILCOLAPSE 621 is an antifoam designed for use in a wide range of aqueous industrial applications. It is a 10% emulsions. This product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. | |
| TEGO® Foamex 845 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 845 is a defoamer emulsion for utmost requirements with regards to foam prevention and destruction. It is a white, thixotropic liquid emulsion of an organo-modified polysiloxane which contains fumed silica. TEGO® Foamex 845 has very strong de...view more TEGO® Foamex 845 is a defoamer emulsion for utmost requirements with regards to foam prevention and destruction. It is a white, thixotropic liquid emulsion of an organo-modified polysiloxane which contains fumed silica. TEGO® Foamex 845 has very strong defoaming with fast foam knock down, especially for surfactant rich formulations. It is highly suitable for flexo/gravure printing. It is also suitable for flooring and brush/roller applications. view less | Request Sample |
| TEGO® Airex 910 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coatin...view more TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coating, flow coating, and curtain coating. It is also suitable for self-leveling floor coating and brush and roller applications. view less | Request Sample |
| TEGO® Airex 900 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particu...view more TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particularly in higher viscosity formulations. TEGO® Airex 900 is recommended to use for self-leveling floor coatings and to be applied by brush, roller, or airless spraying. view less | Request Sample |
| PEL-SIL CD710 | Ele Corporation | PEL-SIL CD710 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and ethylene oxide (EO) and propylene oxide (PO)polyether side chains. PEL-SIL CD710 minimizes foam stability and is an excellent defoamer for waterbo...view more PEL-SIL CD710 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and ethylene oxide (EO) and propylene oxide (PO)polyether side chains. PEL-SIL CD710 minimizes foam stability and is an excellent defoamer for waterborne and solvent-based coatings and inks, and textile fibre processing applications. PEL-SIL CD710 is also recommended for use as a wetting agent, dispersant, and secondary emulsifier. view less | |
| ORDISOL SWT-14 | Concentrol, S.A., Productos | ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-15 | Concentrol, S.A., Productos | ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-16 | Concentrol, S.A., Productos | ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| Surfadol® 541BC Surfactant | ACME | Surfadol® 541BC provides a unique combination of performance benefits to a wide array of waterborne formulations including surface tension reduction, excellent wetting over low energy surfaces and foam control. This product has 50% active liquid in 2-Buto...view more Surfadol® 541BC provides a unique combination of performance benefits to a wide array of waterborne formulations including surface tension reduction, excellent wetting over low energy surfaces and foam control. This product has 50% active liquid in 2-Butoxyethanol. view less | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DEE FO® PI-40 | Munzing Chemie | DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink application...view more DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. It is also used in OPV, emulsion polymers, industrial paints, wood coatings, and adhesives. view less | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...view more ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. view less | |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...view more DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. view less | Request Sample |
| ADDAPT® Foamstop™ MP 55 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range an...view more ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, textiles, and lubricants. view less | |
| ADDITOL® XW 6567 | Allnex | Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects ...view more Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects formed during the mechanical crimping process. It is also recommended in all other coating types requiring food compliance with EU and/or US regulations. view less | Request Sample |
| EFKA® SI 2023 | BASF Formulation Additives | EFKA® SI 2023 is a silicone-based defoamer for solvent-based coatings. It is a solution of defoaming substances containing silicone that prevents the formation of foam and blisters during the manufacturing and application of solvent-based coatings. Recomm...view more EFKA® SI 2023 is a silicone-based defoamer for solvent-based coatings. It is a solution of defoaming substances containing silicone that prevents the formation of foam and blisters during the manufacturing and application of solvent-based coatings. Recommended applications for this product include: two pack systems based on polyurethane and epoxy resins, especially suited for polyurethane-based wood finishes applied, by curtain coating, acid curing and nitrocellulose systems, and oil free polyester systems. view less | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coat...view more WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coating systems and printing inks. It is especially recommended in thixotropic PUR systems. view less | |
| Synperonic™ T/1301 | Croda Coatings & Polymers | Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle t...view more Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. view less | |
| AFCONA - 2028 | AFCONA Additives Sdn Bhd | AFCONA – 2028 is a silicone-containing defoaming polymer in a xylene, methoxy propyl acetate, butyl acetate, and ethyl acetate solution. This product functions as a moderate and easy-to-use defoamer preventing foam and blisters during the manufacture and ...view more AFCONA – 2028 is a silicone-containing defoaming polymer in a xylene, methoxy propyl acetate, butyl acetate, and ethyl acetate solution. This product functions as a moderate and easy-to-use defoamer preventing foam and blisters during the manufacture and application of solvent-based wood finishes and curtain coatings. AFCONA – 2028 finds application in polyurethane coatings for wood, plastic, and car refinishes, unsaturated polyester systems, acid curing coatings for wood, and NC lacquers for wood and general industrial coatings. view less | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...view more ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. view less | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...view more ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. view less | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...view more ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. view less | |
| ORDISOL SWT-01 R | Concentrol, S.A., Productos | ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...view more ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-11 | Concentrol, S.A., Productos | ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...view more ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| FOAMASTER® MO NDW NC | BASF Formulation Additives | FOAMASTER® MO NDW NC is a defoamer for systems based on synthetic latex, especially those based on styrene-butadiene, polyvinyl acetate, acrylic and water-soluble alkyds. It is effective in all systems based on synthetic latex, and it continues to defoam ...view more FOAMASTER® MO NDW NC is a defoamer for systems based on synthetic latex, especially those based on styrene-butadiene, polyvinyl acetate, acrylic and water-soluble alkyds. It is effective in all systems based on synthetic latex, and it continues to defoam effectively, even after months of storage. FOAMASTER® MO NDW NC contributes to excellent brushability and does not cause fish-eyes. It has no effect on the final paint film. view less | |
| DOWSIL™ 205SL Additive | Univar Solutions | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | Request Sample |
| DOWSIL™ 205SL Additive | Dow Performance Silicones | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...view more Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. view less | |
| FOAMSTAR® SI 2250 | BASF Formulation Additives | FOAMSTAR® SI 2250 can be used as a defoamer in various water-based coating systems and pigment concentrates. Due to its stability in high shear processing it functions well during the application of paints and lacquers. Due to its stability to high-shear ...view more FOAMSTAR® SI 2250 can be used as a defoamer in various water-based coating systems and pigment concentrates. Due to its stability in high shear processing it functions well during the application of paints and lacquers. Due to its stability to high-shear processing it functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. view less | |
| ADDAPT® Foamstop™ MP 92 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effectiv...view more ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, food processing, and lubricants. view less | |
| ADDAPT® Foamstop™ 400F | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...view more ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH values (less than 3 or greater than 10). view less | |
| AFCONA - 2021 | AFCONA Additives Sdn Bhd | AFCONA – 2021 is a silicone-free polymer in a xylene solvent. This clear to slightly yellow liquid functions as a defoaming agent that prevents the entrapment of air during processing steps. AFCONA – 2021 finds application in non-acrylic polyurethane coat...view more AFCONA – 2021 is a silicone-free polymer in a xylene solvent. This clear to slightly yellow liquid functions as a defoaming agent that prevents the entrapment of air during processing steps. AFCONA – 2021 finds application in non-acrylic polyurethane coatings for wood, acid curing coatings for wood, air drying alkyd decorative paints and protective coatings, stoving systems for industrial uses, and in NC lacquers for wood and car refinishes. view less | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...view more ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. view less | |
| FOAMSTAR® SI 2240 | BASF Formulation Additives | FOAMSTAR® SI 2240 is a silicone based defoamer compound with a broad compatibility in various binder systems, spontaneous defoaming effect and excellent long term efficiency. It is well suited for the production of pigment concentrates due to the fact tha...view more FOAMSTAR® SI 2240 is a silicone based defoamer compound with a broad compatibility in various binder systems, spontaneous defoaming effect and excellent long term efficiency. It is well suited for the production of pigment concentrates due to the fact that it shows excellent stability under high shear conditions. However, it also shows very good efficiency in the let-down stage. FOAMSTAR® SI 2240 has an extended food contact compliance and global country registrations. view less | |
| TEGO® Foamex 825 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 825 is an effective defoamer emulsion with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 825 has strong defoaming characteristics for clear coat, pig...view more TEGO® Foamex 825 is an effective defoamer emulsion with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 825 has strong defoaming characteristics for clear coat, pigmented, and waterborne systems as well as for polyurethane-acrylate binders. It is highly suited for compressed air spraying and dip coating, flow coating, and curtain coating. It is also suitable for airless spraying, flooring, and brush.roller applications. view less | Request Sample |
| Flexiwet™ NF-80 | Innovative Chemical Technologies, Inc. | Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used...view more Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used in floor polish and stripper, carpet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. view less | Request Sample |
| TEGO® Foamex N | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex N is a defoamer concentrate. It is a hazy liquid dimethyl polysiloxane which contains fumed silica. It has very strong defoaming in solventborne, pigmented, and radiation-curing formulations. Addition of this product may be used at the grindi...view more TEGO® Foamex N is a defoamer concentrate. It is a hazy liquid dimethyl polysiloxane which contains fumed silica. It has very strong defoaming in solventborne, pigmented, and radiation-curing formulations. Addition of this product may be used at the grinding stage of the procedure. TEGO® Foamex N is suitable for use for flooring, flexo/gravure printing, and brush and roller applications. It has clear solubility in both white spirit and butyl acetate. view less | Request Sample |
| TEGO® Foamex 843 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in...view more TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in pigmented low-viscosity systems. It is also suitable for pigmented and waterborne systems. TEGO® Foamex 843 is highly suitable for flexo/gravure printing. It is also suitable for airless spraying and for dip, flow, and curtain coating. view less | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...view more Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...view more EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. view less | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...view more ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. view less | |
| ADDAPT® Foamstop™ 400N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...view more ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH values (less than 3 or greater than 10). view less | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...view more ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. view less | |
| TEGO® Foamex 1488 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 1488 is a highly effective defoamer emulsion. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer containing fumed silica. TEGO® Foamex 1488 has very strong defoaming, with foam-inhibiting, characteristics. It is univ...view more TEGO® Foamex 1488 is a highly effective defoamer emulsion. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer containing fumed silica. TEGO® Foamex 1488 has very strong defoaming, with foam-inhibiting, characteristics. It is universally applicable for clear coat, pigmented, and waterborne systems. This product is highly suitable for dip coating, flow coating, curtain coating and flexo and gravure printing. It is also suitable for compressed air spraying and for brush and roller applications. view less | Request Sample |
| AFCONA - 2050 | AFCONA Additives Sdn Bhd | AFCONA – 2050 is a silicone-free polymer in a SBP spirit and PMA solution. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, suitable for use in select resin systems and solvent-based coatings. AFCONA – 20...view more AFCONA – 2050 is a silicone-free polymer in a SBP spirit and PMA solution. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, suitable for use in select resin systems and solvent-based coatings. AFCONA – 2050 finds application in nitrocellulose lacquers and acid-cured wood finishes, two-component polyurethane lacquers, cold cured epoxy resin systems, unsaturated polyester systems, baking paint applied by curtain coater and dipping, and in colored and matted systems. view less | |
| DAPRO® DF 537 | Elementis | DAPRO® DF 537 is effective across a broad range of water based formulations and latex systems. The product has an excellent combination of foam control and compatibility. This allows for easy incorporation while maintaining persistent defoaming of the sys...view more DAPRO® DF 537 is effective across a broad range of water based formulations and latex systems. The product has an excellent combination of foam control and compatibility. This allows for easy incorporation while maintaining persistent defoaming of the system over the long term. DAPRO® DF 537 is used to prevent and minimize foam in architectural paints, water based printing inks, and latex adhesive and construction systems. view less | Request Sample |
| Optirub™ OP A | Lawter | Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer...view more Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer interactions. Optirub™ OP A is used in flexographic and packaging gravure inks as well as publication gravure inks and aqueous overprint varnishes. view less | |
| PAT-ADD AF 43 | Patcham USA | PAT-ADD AF 43 is a polymeric defoamer for waterborne varnishes, wood-coatings, inks and pigment dispersions. It is low VOC and based on synthetic organic surface active compounds. It is specially formulated for low PVC systems; improved film properties ve...view more PAT-ADD AF 43 is a polymeric defoamer for waterborne varnishes, wood-coatings, inks and pigment dispersions. It is low VOC and based on synthetic organic surface active compounds. It is specially formulated for low PVC systems; improved film properties versus oil and silicone defoamers. Main benefits are: oil- and siloxane free for excellent film properties, excellent de-aeration and defoaming properties, excellent alkali- and acid resistance, contributes to substrate wetting, low-VOC, and shear resistant for high shear conditions. view less | Request Sample |
| AFCONA - 2502 | AFCONA Additives Sdn Bhd | AFCONA – 2502 is a modified polysiloxane with fine silica in a hydrocarbon solvent. This slightly hazy and yellowish transparent liquid functions as a defoamer in water-based applications which undergo high shear forces during preparation. AFCONA – 2502 i...view more AFCONA – 2502 is a modified polysiloxane with fine silica in a hydrocarbon solvent. This slightly hazy and yellowish transparent liquid functions as a defoamer in water-based applications which undergo high shear forces during preparation. AFCONA – 2502 is suitable for use in pigment pastes, high filled systems, and high solid systems, finding application in high and low PVS emulsion paints based on pure or modified acrylics, in water-based pigment concentrates, in printing inks, and in polyurethane dispersions. view less | |
| TEGO® Foamex 815 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 815 N is a defoamer emulsion with a broad application range and excellent effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 815 N has strong defoaming charact...view more TEGO® Foamex 815 N is a defoamer emulsion with a broad application range and excellent effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 815 N has strong defoaming characteristics with very good compatibility. It is widely applicable, particularly in formulations based on acrylate, styrene-acrylate or 2- pack epoxy binders. It is highly suitable for flooring applications and is also suitable for brush/roller applications. view less | Request Sample |
| EFKA® PB 2021 | BASF Formulation Additives | EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product ...view more EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product helps to prevent surface irregularities to give the smoothest possible surface. EFKA® PB 2021 is especially suited for solvent-based coatings if foam formation is a problem when applied by spraying or curtain coating. view less | |
| EFKA® PB 2744 | BASF Formulation Additives | EFKA® PB 2744 is an ultra low VOC de-aerator providing excellent efficiency as well as long-term persistency and effectiveness against macro and micro-foam. Recommended for clear and pigmented resin systems, and compatible in high solids 2K polyurethane, ...view more EFKA® PB 2744 is an ultra low VOC de-aerator providing excellent efficiency as well as long-term persistency and effectiveness against macro and micro-foam. Recommended for clear and pigmented resin systems, and compatible in high solids 2K polyurethane, 2K epoxy and UV coatings. Especially suitable for high solids industrial flooring. view less | |
| XOANONS® WE-D980 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D980 is a defoamer concentrate. It is a polysiloxane compound with hydrophobic particles. It offers good foam inhibition and micro-bubble elimination. It can be used in high solid content, solvent-free epoxy and screen ink paints. Due to the e...view more XOANONS® WE-D980 is a defoamer concentrate. It is a polysiloxane compound with hydrophobic particles. It offers good foam inhibition and micro-bubble elimination. It can be used in high solid content, solvent-free epoxy and screen ink paints. Due to the existence of hydrophobic particles, precipitation may occur with long time storage. This does not affect the quality of products after stirring before use. Shelf time is 1-2 days after thinning, except for varnish applications. view less | |
| DARVAN® 7-N | Vanderbilt Minerals, LLC | DARVAN 7-N is a low foaming sodium polymethacrylate dispersing agent that is highly effective in dispersing minerals in water based systems. | Request Sample |
| BYK®-016 | BYK | BYK®-016 is a compound of foam-destroying polymers and hydrophobic particles. It is a very effective silicone- and mineral oil free defoamer. It has no negative influence on the printing behavior and does not cause defects in the typography. At the time o...view more BYK®-016 is a compound of foam-destroying polymers and hydrophobic particles. It is a very effective silicone- and mineral oil free defoamer. It has no negative influence on the printing behavior and does not cause defects in the typography. At the time of publication the active compound in BYK-016 fully meets all requirements of the European Union for "materials and articles in contact with foodstuffs“, and complies with FDA 21 CFR § 175.105, 175.300, 175.320, 176.200, 176.210. view less | Request Sample |
| ADDITOL® VXW 6210 N | Allnex | ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterb...view more ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterborne paint systems. This product is recommended for mainly low and medium-viscosity paints, such as gloss and silky gloss emulsions paints, and coatings for parquet floors and furniture on the basis of acrylate and acrylate/polyurethane emulsions. view less | Request Sample |
| TEGO® Foamex 822 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has st...view more TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has strong long-term defoaming. It is well suited for clearcoats, waterborne, and sensitive systems. It is highly suitable for brush/roller applications, compressed air spraying, and dip, flow, and curtain coating. It is also suitable for airless spraying and flexo/gravure printing. view less | Request Sample |
| Surfadol® 541S Surfactant | ACME | Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other sys...view more Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other systems. Surfadol® 541S is without APEO and non-toxic. view less | |
| DOWSIL™ 8590 Additive | Univar Solutions | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | Request Sample |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | |
| Borchers® AF 1171 | Borchers, A Company of OMG | Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This ...view more Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This product improves the film gloss, substrate wetting, colour strength in pigmented systems and avoids microfoam formation. It is easily emulsified in water and easy to incorporate. Borchers® AF 1171 is characterized by good binder compatibility and needs little shear force to incorporate. view less | |
| FOAMSTAR® SI 2280 | BASF Formulation Additives | FOAMSTAR® SI 2280 is a colorless liquid designed to be used as a defoamer in water-based coating systems and pigment concentrates. One of the unique properties of this family of defoamers is the ease of incorporation under low-shear conditions without cau...view more FOAMSTAR® SI 2280 is a colorless liquid designed to be used as a defoamer in water-based coating systems and pigment concentrates. One of the unique properties of this family of defoamers is the ease of incorporation under low-shear conditions without causing negative side effects in the final paint film. Another strong property is the high-shear stability of these defoamers, which makes them extremely suitable to be used in high-shear processing such as grinding, stirring and pumping. view less | |
| 2-Octanol 99% | Acme Hardesty Co. | 2-Octanol 99% is an aromatic, colorless, transparent liquid. It is a possible alternative for the petrochemical 2-ethylhexanol in plasticizers. It is used as a frother for mineral flotation, a flow aid, a defoaming agent in paper production, a solvent for...view more 2-Octanol 99% is an aromatic, colorless, transparent liquid. It is a possible alternative for the petrochemical 2-ethylhexanol in plasticizers. It is used as a frother for mineral flotation, a flow aid, a defoaming agent in paper production, a solvent for fats and waxes, and to produce intermediates for perfumes and artificial flavors. view less | Request Sample |
| Octosol A-18 | Tiarco Chemical | Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...view more Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. view less | |
| EFKA® PB 2018 AN | BASF Formulation Additives | EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 201...view more EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 2018 is especially suited for solvent-based wood finishes if foam formation is a problem when applied by spraying or curtain coating. It has very good compatibility properties which makes it extremely suitable for use in clear coatings. view less | |
| AFCONA - 2022 | AFCONA Additives Sdn Bhd | AFCONA – 2022 is a silicone-containing defoaming polymer in a xylene, methoxy propyl acetate, butyl acetate, and ethyl acetate solution. This slight-to-transparent yellow liquid functions as a strong and easy-to-use defoamer preventing foam and blisters d...view more AFCONA – 2022 is a silicone-containing defoaming polymer in a xylene, methoxy propyl acetate, butyl acetate, and ethyl acetate solution. This slight-to-transparent yellow liquid functions as a strong and easy-to-use defoamer preventing foam and blisters during the manufacture and application of solvent-based and solvent-free coatings. AFCONA – 2022 finds application in two-pack systems based on polyurethane and epoxy resins, baking paints based on alkyd resins, and acrylic and saturated polyesters, and in air drying industrial coatings based on long and medium-oil alkyd resins. view less | |
| SILCOLAPSE 623 | Elkem Silicones | SILCOLAPSE 623 is a 30% silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILC...view more SILCOLAPSE 623 is a 30% silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 623 gives good results at wide-ranging pH and is particularly effective under alkaline conditions. view less | |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...view more Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
