UL Prospector

Success!

Successfully saved your search
133 Results
HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #99169) Heubach Ltd HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #99169) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 99169.
HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02230) Heubach Ltd HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02230) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02230.
HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02225) Heubach Ltd HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02225) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02225.
Resinate® C1051-60 (BA80) Polyol for Direct to Metal Coatings Resinate Materials Group, Inc. Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is
 supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, ...view more Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is
 supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, 60% recycled and renewable content. view less
Resinate® C1051-60 (BA80) Polyol for Direct to Metal Coatings Resinate Materials Group, Inc. Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is
 supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, ...view more Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is
 supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, 60% recycled and renewable content. view less
HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #01209) Heubach Ltd HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #01209) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 01209.
Red Pigmented Direct-To-Metal Coating Based on Worléecryl 7461 (Formulation #ACR12V1) Micronisers Australasia Pty. Ltd. This formulation is for a red pigmented direct-to-metal coating based on Worléecryl 7461. It is a starting point formulation using Oxylink™.
HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02226) Heubach Ltd HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02226) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02226.
HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02228) Heubach Ltd HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02228) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02228.
HEUCOPHOS® ZMP In Direct To Metal One Coat (Formulation #WP 98-4) Heubach Ltd HEUCOPHOS® ZMP In Direct To Metal One Coat (Formulation #WP 98-4) is a formulation for a water based direct to metal one coat in combination with Cognis formulation No. WP 98-4.
HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02227) Heubach Ltd HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02227) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02227.
HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02229) Heubach Ltd HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02229) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02229.
HEUCOPHOS® ZAM-Plus / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #341-09) Heubach Ltd HEUCOPHOS® ZAM-Plus / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #341-09) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 341-09.
Acrylic Direct to Metal Coating Based on Posichem PC-Mull AC 16-2 (Formulation #Acr06V1) Micronisers Australasia Pty. Ltd. This formulation is an acrylic direct to metal coating based on Posichem PC-Mull AC 16-2. It is a starting point formulation using Oxylink™.
EPS® 2570 WHT SP-2 DTM EPS Materials This formulation produces a direct-to-metal coating. It features the product EPS® 2570.
EPS® 2570 WHT SP-1 DTM EPS Materials This formulation produces a direct-to-metal coating. It features the product EPS® 2570.
HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Direct Metal One Coat (Formulation #341-11) Heubach Ltd HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Direct Metal One Coat (Formulation #341-11) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 341-11.
1K Water-Based Primer Surfacer for Automotive Refinish BASF Dispersions & Resins This water-based primer surfacer is for automotive refinishing. It features low VOC content, quick sanding times, and good direct-to-metal performance.
EPS® 2580 White High Gloss Enamel (Formulation EPS 2580 WHT SP-1) EPS Materials EPS® 2580 White High Gloss Enamel (Formulation EPS 2580 WHT SP-1) formulation information. EPS® 2580 provides the capability to formulate coatings at <50g/L VOC.
Water-based 2K High-gloss PUR for DTM and Topcoat Applications (With End-of-Pot-Life Indication) BASF Dispersions & Resins High-performance coatings with low VOC content are needed to meet the market demand and government regulations. BASF has developed a low VOC, high-performance, water-based 2K polyurethane coating system for direct-to-metal and topcoat applications.
EPS® 2580 DTM Primer (Formulation EPS 2580 WHT PR-1 DTM) EPS Materials EPS® 2580 DTM Primer (Formulation EPS 2580 WHT PR-1 DTM) formulation information. EPS® 2580 provides the capability to formulate coatings at <50g/L VOC.
Water-Based Single Component High Gloss Acrylic for DTM and Topcoat Applications BASF Dispersions & Resins High performance coatings with low VOC content are needed to meet the market demand and government regulation. BASF has developed a low VOC, high performance, water-based coating system for direct to metal and topcoat applications.
Quick Dry Primer Surfacer for Automotive Refinish BASF Dispersions & Resins This quick dry primer surfacer for automotive refinish provides good direct-to-metal performance. It has high build capabilities and easy sanding (wet or dry).
EPS® 2580 DTM Ultra Deep Tint Base (Formulation EPS 2580 UDP-1 DTM) EPS Materials EPS® 2580 DTM Ultra Deep Tint Base (Formulation EPS 2580 UDP-1 DTM) formulation information. EPS® 2580 provides the capability to formulate coatings at <50g/L VOC.
HALOX® 515 ICL Phosphate Specialty HALOX® 515 is a liquid, organic corrosion inhibitor. This product is most commonly used to prevent corrosion in high-gloss direct-to-metal coating system manufacturing applications. Request Sample
White Protective DTM Metal Coating Based on Neocryl® XK-86 (Formulation #ACR07V1) Micronisers Australasia Pty. Ltd. This formulation is for a white protective DTM metal coating based on Neocryl® XK-86. It is a starting point formulation using Oxylink™.
Blue Pigmented Protective DTM Metal Coating Based on Neocryl XK-86 (Formulation #ACR11V1) Micronisers Australasia Pty. Ltd. This formulation is for a blue pigmented protective DTM metal coating based on Neocryl XK-86. It is a starting point formulation using Oxylink™.
Waterborne White Primer (Formulation #WBEPOX048) ASCOTEC White Waterborne 2K EPOXY DTM Paint based on Epirez® 6520, ASCONIUM® 142DA and ASCOTRAN® H10.
ASCOTRUST® X4 ASCOTEC ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. Request Sample
High-Gloss WB White DTM (Formulation #WBACRY7358) ASCOTEC White High Gloss Waterborne Acrylic DTM Paint based on Pliotec® HDT16, ASCONIUM® 142DA and ASCOTRAN® H10.
Waterborne White DTM (Formulation #WBALKY404) ASCOTEC White Waterborne Alkyd DTM Paint based on Inokem® 3301, ASCONIUM® 114 and ASCOTRAN® H10.
Waterborne White DTM (Formulation #WBALKY802) ASCOTEC White Waterborne Alkyd DTM Paint based on Inokem® 3304, ASCONIUM® 114 and ASCOTRAN® H10.
PLIOTEC® SC140 Omnova Solutions PLIOTEC® SC140 is a styrene acrylic copolymer. It is a zero‐VOC acrylic resin for light industrial direct‐to‐metal (DTM) applications. This product offers excellent corrosion resistance, great gloss retention and block resistance.
JONCRYL® PRO 1525 BASF Dispersions & Resins JONCRYL PRO 1525 is an emulsion for direct-to-metal applications. It has good corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion is harder than JONCRYL PRO 1522 and shows improv...view more JONCRYL PRO 1525 is an emulsion for direct-to-metal applications. It has good corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion is harder than JONCRYL PRO 1522 and shows improved block performance. JONCRYL PRO 1525 is recommended for applications such as interior/exterior general metal industrial coating applications and OEM industrial direct-to-metal applications that require a high gloss (> 80 at 60°) and a dry film thickness of 25 – 40 microns (1 – 1.5 mils). view less Request Sample
JONCRYL® PRO 1522 BASF Dispersions & Resins JONCRYL PRO 1522 is an emulsion for direct-to-metal applications. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion offers exterior durability, is compatible w...view more JONCRYL PRO 1522 is an emulsion for direct-to-metal applications. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion offers exterior durability, is compatible with anti-corrosive pigments, and can be formulated between 100 – 250 g/l VOC. Recommended applications include interior/exterior general metal industrial coatings applications and OEM industrial direct-to-metal applications that require high gloss (> 80 at 60°) and a dry film thickness of 25 – 40 microns (1 – 1.5 mils). view less Request Sample
Nubirox 102 Ferro Pigments Nubirox 102 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate with high performance and compatibility in solventborne and waterborne systems, suitable for glossy DTM (Direct To Metal) applications.
HALOX® CZ-170 ICL Phosphate Specialty HALOX® CZ-170 is a universal corrosion and tannin stain-inhibiting pigment. This product is most commonly used in direct-to-metal finish, semi and high gloss coating system, and thin film coating applications. Request Sample
Resinate® C2901-04 (PMA80) Resinate Materials Group, Inc. Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal app...view more Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal applications where weather stability and versatile performance systems are required. view less
Waterborne White DTM (Formulation #WBACRY445) ASCOTEC White Waterborne Acrylic DTM Paint based on Maincote® 1100, ASCONIUM® 142DA and ASCOTRAN® H10.
Waterborne White DTM (Formulation #WBACRY799) ASCOTEC White Waterborne Acrylic DTM Paint based on Alberdingk® AC2403, ASCONIUM® 142DA and ASCOTRAN® H10.
Waterborne White DTM (Formulation #WBACRY2033) ASCOTEC White Waterborne Styrene Acrylic DTM Paint based on Carboset® CR765, ASCONIUM® 143 and ASCOTRAN® H10.
Waterborne White DTM (Formulation #WBACRY6999) ASCOTEC White Waterborne Acrylic DTM Paint based on EPS 595, ASCONIUM® 143 and ASCOTRAN® H10.
High-Gloss WB White DTM (Formulation #WBACRY7625) ASCOTEC White High Gloss Waterborne Styrene Acrylic DTM Paint based on Neocryl® XK85, ASCONIUM® 143 and ASCOTRAN® H10.
Waterborne White DTM (Formulation #WBACRY8111) ASCOTEC White Waterborne Styrene Acrylic DTM Paint based on Maincote® HG100, ASCONIUM® 142DA and ASCOTRAN® H10.
WB Rust-Converting Primer (Formulation #WBACRY799-115R4) ASCOTEC White Waterborne Acrylic Rust Converting DTM Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H17 and ASCOTRUST® X4.
EPS® 2580 EPS Materials EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 pr...view more EPS® 2580 is a self-crosslinking, styrenated acrylic emulsion polymer for high performance direct-to-metal coatings. Offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development, EPS 2580 provides the capability to formulate coatings at <50g/L VOC. view less Request Sample
ZY-133 Quaker Color (a Division of McAdoo & Allen, Inc.) ZY-133 is NMP free oil modified aliphatic urethane suitable in coatings for light industrial direct to metal coatings with fast water resistance development requirement. It is also applicable for wood coatings, industrial coatings, and more.
HALOX® 515 LFG ICL Phosphate Specialty HALOX® 515 LFG is a liquid, organic corrosion inhibitor with a freezing point of between -13 and -15°C. This product is most commonly used to prevent corrosion in high-gloss direct-to-metal coating system manufacturing applications. Request Sample
RAYKOTE® 2001 Specialty Polymers, Inc. RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal ...view more RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal and primer applications. view less
BECKOSOL® 6422-K3-75 Polynt Composites BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construct...view more BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construction equipment finishes, among other uses. This product dries tack-free in two hours and provides good color and color retention. It has strong water-spot, humidity, and salt spray resistance and will retain gloss in exterior exposures. view less
ProHere® U 10001 Michelman ProHere® U 10001 is a nonionic polyurethane emulsion that provides good adhesion to various metallic substrates, high mechanical flexibility and chemical resistance. Combining this with a wide formulation freedom and good optical aspects, it is a good sta...view more ProHere® U 10001 is a nonionic polyurethane emulsion that provides good adhesion to various metallic substrates, high mechanical flexibility and chemical resistance. Combining this with a wide formulation freedom and good optical aspects, it is a good starting point for your direct-to-metal formulations. view less
ASCONIUM® 114 GSI Exim America, Inc. ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
ASCONIUM® 140 GSI Exim America, Inc. ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
ASCONIUM® 142DA GSI Exim America, Inc. ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, profe...view more ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Valtex 589 US Polymers - Accurez LLC Valtex 589 is a high quality varnish for direct to metal applications which will provide excellent water resistance. Valtex 589 accepts pigments well and has the benefit of a long open time. This is an air dry system and is AASHO M 69-70. Request Sample
ASCONIUM® 112 GSI Exim America, Inc. ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
ASCONIUM® 141 GSI Exim America, Inc. ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
ASCONIUM® 143 GSI Exim America, Inc. ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
ASCONIUM® 111 GSI Exim America, Inc. ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
ASCONIUM® 144DA GSI Exim America, Inc. ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, profe...view more ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
PLIOTEC® HDT12 Omnova Solutions PLIOTEC® HDT12 is a unique styrene acrylic latex that, thanks to a proprietary Hydrophobic Dispersion Technology (HDT), provides an excellent water resistance, thus delivering corrosion protection for metal, even without the use of anticorrosive pigments....view more PLIOTEC® HDT12 is a unique styrene acrylic latex that, thanks to a proprietary Hydrophobic Dispersion Technology (HDT), provides an excellent water resistance, thus delivering corrosion protection for metal, even without the use of anticorrosive pigments. PLIOTEC® HDT12 can adhere to ferrous and non ferrous metals, for use on a variety of residential, commercial and industrial Direct-To-Metal (DTM) applications, from high gloss enamels to anticorrosive primers. view less
RayKote® 2012 Specialty Polymers RayKote® 2012 is a styrene acrylic emulsion copolymer. It is explicitly designed to provide excellent adhesion and high gloss to various metal substrates. Coatings formulated with RayKote 2012 exhibits outstanding corrosion and early water resistance for ...view more RayKote® 2012 is a styrene acrylic emulsion copolymer. It is explicitly designed to provide excellent adhesion and high gloss to various metal substrates. Coatings formulated with RayKote 2012 exhibits outstanding corrosion and early water resistance for direct-to-metal and primer applications. RayKote 2012 is mainly used for light general industrial applications. view less
PLIOTEC™ HDT12 Synthomer PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIO...view more PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIOTEC™ HDT12 is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers. view less
PLIOTEC® HDT16 Synthomer PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water...view more PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water-based resin for anti-corrosion paints and primers, Direct-To-Metal (DTM) coatings and multi-surface renovation paints. view less
ACRONAL® PRO 770 NA BASF Dispersions & Resins ACRONAL PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONAL PRO 770 shows outstanding anti-corrosiv...view more ACRONAL PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONAL PRO 770 shows outstanding anti-corrosive properties both in glossy DTM and matte monocoat/ primer applications without or with only limited addition of phosphate anticorrosive pigments. view less Request Sample
Maxemul™ 9107 – A Versatile Emulsifier for VOC Free Epoxy Emulsions Croda Coatings & Polymers Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film ...view more Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film properties. Its versatility makes it suitable for floor coatings, wall paints and direct-to-metal applications. view less
PLIOTEC® HDT16 Omnova Solutions PLIOTEC® HDT16 is a styrene acrylic latex that provides excellent water resistance, adhesion to ferrous and non-ferrous metals and fast hardness development, hence ideally suitable for industrial Direct-To-Metal (DTM) applications, from high gloss enamels...view more PLIOTEC® HDT16 is a styrene acrylic latex that provides excellent water resistance, adhesion to ferrous and non-ferrous metals and fast hardness development, hence ideally suitable for industrial Direct-To-Metal (DTM) applications, from high gloss enamels to anticorrosive primers. PLIOTEC® HDT16 is also particularly suitable for the formulation of multi-surface renovation paints, for both horizontal and vertical uses, with superior adhesion on a wide variety of substrates including ceramic tiles, PVC, concrete, glass, wood, and PU foam. view less
K-FLEX® 850S Low-VOC Coalescent LANXESS (former Emerald Performance Materials) K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and indus...view more K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and industrial and protective coatings. It is also effective in nitrocellulosic and acrylic lacquers. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less
4962-M-75 Rosin Modified Epoxy Ester Resin Gabriel Performance Products 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less
Amicure® IC166 Curing Agent Evonik Operations GmbH, BL Crosslinkers Amicure® IC166 is a polycarbamide curing agent for DTM C3 coatings. It is faster-curing compared to Amicure® IC133. This product is ideal for plural component spray systems. Request Sample
BECKOSOL AQ® 405 Polynt Composites BECKOSOL AQ® 405 is a short oil alkyd emulsion based on bio-renewable fatty acids that has a high gloss and good corrosion resistance for direct-to-metal topcoats. BECKOSOL AQ® 405 requires no coalescing solvent for film formation and produces AIM complia...view more BECKOSOL AQ® 405 is a short oil alkyd emulsion based on bio-renewable fatty acids that has a high gloss and good corrosion resistance for direct-to-metal topcoats. BECKOSOL AQ® 405 requires no coalescing solvent for film formation and produces AIM compliant metal topcoats that develop equal or better performance than waterreducible and solvent-borne alkyds. BECKOSOL AQ® 405 does not contain alkyl phenol ethoxylates. view less
AVANSE™ MV-100 Univar Solutions AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field ...view more AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field applied finishes for metal, concrete and masonry substrates. It has the ability to be formulated into high performance coating at or below 100 g/L of volatile organic content (VOC). view less Request Sample
Carboset® CR-3090 Lubrizol Advanced Materials, Inc. Carboset® CR-3090 is an APEO and formaldehyde free, styrene-acrylic copolymer emulsion. This water-borne acrylic emulsion offers a single resin for direct to metal coatings and metal topcoats, and can be formulated for a high gloss finish. Carboset CR-309...view more Carboset® CR-3090 is an APEO and formaldehyde free, styrene-acrylic copolymer emulsion. This water-borne acrylic emulsion offers a single resin for direct to metal coatings and metal topcoats, and can be formulated for a high gloss finish. Carboset CR-3090 offers excellent corrosion resistance, chemical and stain resistance, and resistance to the deleterious effects of water and humidity for high performance coatings that look better longer. view less
RAYKOTE® 2010 Specialty Polymers, Inc. RAYKOTE® 2010 is an anionic styrene acrylic polymer intended for high performance, low VOC coatings. This product is an industrial maintenance coating and can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to...view more RAYKOTE® 2010 is an anionic styrene acrylic polymer intended for high performance, low VOC coatings. This product is an industrial maintenance coating and can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to-metal finishes. RAYKOTE® 2010 can adhere to several different metal surfaces. It is primarily used as a coalescent demanded coating that provides early water resistance and formulated that can meet strict VOC regulations view less
NACORR® XR-417 King Industries, Inc. NACORR® XR-417 is a metal complex created to enhance the corrosion resistance of direct to metal coatings. It is really useful in waterborne coatings due to its dispersability quality. It appears as a clear liquid and offers the ability to act with anti-c...view more NACORR® XR-417 is a metal complex created to enhance the corrosion resistance of direct to metal coatings. It is really useful in waterborne coatings due to its dispersability quality. It appears as a clear liquid and offers the ability to act with anti-corrosive pigments synergistically and can easily be incorporated. This product can be applied in water-based anti-corrosive coatings, solvent-based anti-corrosive coatings, and ambient cured or thermoset systems. view less
AROLON® 847-W-42 Polynt Composites AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cur...view more AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cures and sealers. This product offers water-sport resistance, chemical resistance, and good adhesion to concrete and metal. It can also offer good corrosion resistance with inhibitive pigment stability. view less
SETALUX® 17-2319 Allnex SETALUX® 17-2319 is a hydroxy functional acrylic polyol, which has excellent adhesion to all the common metal substrates like cold rolled steel, stainless steel, aluminum, galvanized surface, etc. It is HAPs-free and contains PCBTF. This allows formulator...view more SETALUX® 17-2319 is a hydroxy functional acrylic polyol, which has excellent adhesion to all the common metal substrates like cold rolled steel, stainless steel, aluminum, galvanized surface, etc. It is HAPs-free and contains PCBTF. This allows formulator to make very low VOC direct-to-metal (DTM) primer. SETALUX® 17-2319 exhibits very good corrosion and humidity resistance. It gives excellent inter-coat adhesion with various types of topcoats and gives superior topcoat hold-out. view less Request Sample
CRAYVALLAC® OPTIMA Coatex an Arkema Group CRAYVALLAC® OPTIMA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...view more CRAYVALLAC® OPTIMA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less Request Sample
RayKote® 2010 Specialty Polymers RayKote® 2010 is a styrene acrylic polymer specifically designed for high performance, low VOC, industrial maintenance coatings. RayKote® 2010 can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to-metal finis...view more RayKote® 2010 is a styrene acrylic polymer specifically designed for high performance, low VOC, industrial maintenance coatings. RayKote® 2010 can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to-metal finishes. RayKote® 2010 provides outstanding early water resistance and excellent adhesion over variety of metal substrates. Due to its low coalescent demand, coatings formulated with RayKote® 2010 can meet current stringent VOC regulations. Is APEO and formaldehyde free. Suggested for use in industrial maintenance finishes, metal finishes for commercial buildings, DIY metal coatings, and transportation vehicle coatings. view less
K-FLEX® 975P Low-VOC Coalescent LANXESS (former Emerald Performance Materials) K-FLEX® 975P is economical to use and created to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It demonstrates desirable performance properties relative to high-VOC coalescents. Notable cha...view more K-FLEX® 975P is economical to use and created to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It demonstrates desirable performance properties relative to high-VOC coalescents. Notable characteristics include excellent scrub resistance, dirt resistance, blocking resistance, gloss and Tg suppression. K-FLEX 975P can also be used in direct-to-metal and corrosion resistant coatings, where it demonstrates excellent hardness development and salt fog resistance. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less
JONCRYL® PRO 1524 BASF Dispersions & Resins JONCRYL PRO 1524 is an epoxy-acrylic hybrid dispersion for high gloss corrosion-resistant coatings. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. Furthermore, this emulsion offers good chemical resistance, excellent wet and dry adhesion and can be formulated at VOC levels of less than 100 g/l VOC. JONCRYL PRO 1524 is designed for industrial direct-to-metal...view more JONCRYL PRO 1524 is an epoxy-acrylic hybrid dispersion for high gloss corrosion-resistant coatings. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. Furthermore, this emulsion offers good chemical resistance, excellent wet and dry adhesion and can be formulated at VOC levels of less than 100 g/l VOC. JONCRYL PRO 1524 is designed for industrial direct-to-metal applications that require a high gloss (> 80 at 60°) and exhibits an excellent balance of performance properties. view less Request Sample
Crestakyd® 30-9502 Scott Bader Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties.
K-FLEX® 500P Low-VOC Coalescent LANXESS (former Emerald Performance Materials) K-FLEX® 500P offers excellent scrub resistance and gloss and aids in the development of desirable performance characteristics while offering improved handling due to low temperature flexibility. Its performance and value make it a viable replacement to hi...view more K-FLEX® 500P offers excellent scrub resistance and gloss and aids in the development of desirable performance characteristics while offering improved handling due to low temperature flexibility. Its performance and value make it a viable replacement to higher-volatility coalescents such as TMPDMIB (2,2,4-trimethyl-1,3-pentanediol monoisobutyrate) or even low-VOC types such as triethylene glycol di-2-ethylhexanoate. It is highly recommended for interior and exterior latex paints, industrial coatings, nitrocellulosic and acrylic lacquers, and special purpose coatings. It is also effective in direct-to-metal coatings such as primers. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less
JONCRYL® xDTM BASF Dispersions & Resins JONCRYL xDTM is a solventborne acrylic polyol designed for usage in direct-to-metal 2K polyurethane coating systems. It adheres well to multiple metal substrates, including cold-rolled steel and aluminum. It exhibits excellent corrosion resistance, high g...view more JONCRYL xDTM is a solventborne acrylic polyol designed for usage in direct-to-metal 2K polyurethane coating systems. It adheres well to multiple metal substrates, including cold-rolled steel and aluminum. It exhibits excellent corrosion resistance, high gloss retention, high early and final hardness, and superior chemical resistance. JONCRYL xDTM also has a great combination of a long pot life and a fast dry time, to enable easier and more efficient application. Also, JONCRYL xDTM can be formulated to low or near-zero VOC with exempt solvents. JONCRYL xDTM is recommended for use in General Industrial, ACE, and Commercial Vehicle applications as a DTM, and in Automotive Refinish as a primer. view less Request Sample
JONCRYL® OH 8314 BASF Dispersions & Resins JONCRYL OH 8314 is a hydroxyl functional acrylic dispersion for two-component polyurethane coatings designed with an indication of end of useful life (pot life). Unique synthesis allows for performance advantages and provides characteristics comparable to ...view more JONCRYL OH 8314 is a hydroxyl functional acrylic dispersion for two-component polyurethane coatings designed with an indication of end of useful life (pot life). Unique synthesis allows for performance advantages and provides characteristics comparable to solventborne systems. Coatings formulated with JONCRYL OH 8314 exhibit good durability and feature a low viscosity, low isocyanate demand with excellent flow and leveling. Innovative processing provides a clean water phase which results in low foaming and reduced water sensitivity, an advantage for various applications. view less Request Sample
SmartHide™ ShayoNano USA, Inc. SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon z...view more SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primers, and paper coatings. view less
EPS® 2843 EPS Materials EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...view more EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less Request Sample
JONCRYL® 1532 BASF Dispersions & Resins JONCRYL 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions...view more JONCRYL 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions. This product exhibits low VOC capability. view less Request Sample
NECOWEL™ 5100 ASK Chemicals NECOWEL™ 5100 is a rheologically modified alkyd emulsion, which is especially suited for the formulation of house paints with high gloss and paint brush application. Due to this modification the flow behavior of the aqueous house paint is improved. There ...view more NECOWEL™ 5100 is a rheologically modified alkyd emulsion, which is especially suited for the formulation of house paints with high gloss and paint brush application. Due to this modification the flow behavior of the aqueous house paint is improved. There is no need of additional associative thickeners. NECOWEL™ 5100 offers fast drying properties as well as weather- and yellowing resistance. view less
NECOWEL™ 5088 ASK Chemicals NECOWEL™ 5088 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers very good drying properties and good weather- and yellowing resistance. It is therefore applicable in air drying top coats, for agricultural equipment. Lacquers based on NECOWEL™ 5088 show good adhesion on metal...view more NECOWEL™ 5088 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers very good drying properties and good weather- and yellowing resistance. It is therefore applicable in air drying top coats, for agricultural equipment. Lacquers based on NECOWEL™ 5088 show good adhesion on metal- and plastic substrates. view less
NECOWEL™ 5286 ASK Chemicals NECOWEL™ 5286 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers outstanding drying properties and good weather- and yellowing resistance. It is therefore applicable in air and forced drying top coats for agricultural equipment. Lacquers based on NECOWEL™ 5286 show good adhesion on metal...view more NECOWEL™ 5286 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers outstanding drying properties and good weather- and yellowing resistance. It is therefore applicable in air and forced drying top coats for agricultural equipment. Lacquers based on NECOWEL™ 5286 show good adhesion on metal- and plastic substrates. view less
NECOWEL™ 2329 ASK Chemicals NECOWEL™ 2329 is an aliphatic PU-modified alkyd resin with medium oil length. It offers good drying properties as well as weather and yellowing resistance. Because of these properties, it is applicable in air drying top coats on wood and metal. it is also...view more NECOWEL™ 2329 is an aliphatic PU-modified alkyd resin with medium oil length. It offers good drying properties as well as weather and yellowing resistance. Because of these properties, it is applicable in air drying top coats on wood and metal. it is also used in sustainable wall paints due to the high content of renewable raw materials compared to acrylic emulsions. Lacquers based on NECOWEL™ 2329 show good adhesion on metal- and plastic substrates. view less
HEUCOPHOS® ZPO Heubach Ltd HEUCOPHOS® ZPO is an organic modified basic zinc orthophosphate hydrate that shows excellent protective behavior in many binder systems, such as alkyd resins and physically drying systems, due to its special organic modification fixed on the particle surf...view more HEUCOPHOS® ZPO is an organic modified basic zinc orthophosphate hydrate that shows excellent protective behavior in many binder systems, such as alkyd resins and physically drying systems, due to its special organic modification fixed on the particle surface. This product has an oil absorption value of tip. 20g/100g, a sieve residue (30 microns) of max. 0.01, and an organic content of tip. 0.3%. view less Request Sample
HEUCORIN® RZ Heubach Ltd HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%, an organic content of typ. 49%, and a water-soluble chloride of max. 0.025%. By adding very small quantities of HEUCORIN® RZ and HEUCOPHOS® pigments and thus taking advantage of unique organic-norganic synergies, it is possible to improve existing protective coatings to ...view more HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%, an organic content of typ. 49%, and a water-soluble chloride of max. 0.025%. By adding very small quantities of HEUCORIN® RZ and HEUCOPHOS® pigments and thus taking advantage of unique organic-norganic synergies, it is possible to improve existing protective coatings to some significant extent. view less Request Sample
Oxylink™ 3102 Micronisers Australasia Pty. Ltd. Oxylink™ 3102 is an aqueous additive for waterborne resins for improved overall performance and faster processing. This off-white liquid has a solid content of 40 wt.-% and viscosity of: Shear thinning; Shear rate D = 10 s-1 < 200 mPas. It is applicable i...view more Oxylink™ 3102 is an aqueous additive for waterborne resins for improved overall performance and faster processing. This off-white liquid has a solid content of 40 wt.-% and viscosity of: Shear thinning; Shear rate D = 10 s-1 < 200 mPas. It is applicable in clear as well as in pigmented systems, in satin and glossy coatings. It is easy to handle and ready-to-use. This product benefits coatings for wood and fiber boards, paper and plastics, metals, concrete and asphalt, vitreous and other siliceous substrates. Oxylink™ is a high-tech additive based on nanotechnology. The additive improves the cross-linking of the resin from within and thus strengthens the film against impact from the outside. view less
Carboset® CR-3100 Lubrizol Advanced Materials, Inc. Carboset® CR-3100 is an APEO and formaldehyde-free, styrene-acrylic copolymer emulsion. This water-borne acrylic emulsion offers a single resin for low VOC, direct-t0-metal coatings and metal topcoats, and can be formulated for a high gloss finish. Carbos...view more Carboset® CR-3100 is an APEO and formaldehyde-free, styrene-acrylic copolymer emulsion. This water-borne acrylic emulsion offers a single resin for low VOC, direct-t0-metal coatings and metal topcoats, and can be formulated for a high gloss finish. Carboset CR-3100 offers excellent corrosion resistance, chemical and stain resistance, and resistance to the deleterious effects of water and humidity for high performance coatings that look better longer. view less
DOUBLEMER® 350B Double Bond Chemical Ind., Co., Ltd. DOUBLEMER® 350B is an acrylic oligomer diluted with 50% of solvent (BAC). This resin is designed as an additive to provide flexibility and improved adhesion to plastic and metal. It is characterized by light color, moderate viscosity and good balance of a...view more DOUBLEMER® 350B is an acrylic oligomer diluted with 50% of solvent (BAC). This resin is designed as an additive to provide flexibility and improved adhesion to plastic and metal. It is characterized by light color, moderate viscosity and good balance of adhesion and surface hardness. Formulated UV/EB curable products containing DOUBLEMER® 350B may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This clear viscous liquid is recommended for use in coatings on plastic and metalview less
DOUBLEMER® 9166 Double Bond Chemical Ind., Co., Ltd. DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint...view more DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint color allows for versatile adhesion promotion with various kinds of UV coatings. This product appears as a dark liquid. Formulated UV/EB curable products containing DOUBLEMER® 9166 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. It is recommeneded for use in solder resist formulations, metal coatings. plastic coatings and etch resist applications. view less
DOUBLEMER® 321HT Double Bond Chemical Ind., Co., Ltd. DOUBLEMER® 321HT is an acrylic oligomer diluted with 50% BAC for applications requiring high gloss, high flexibility and improved adhesion to difficult substrates after UV curing. It provides excellent adhesion on metal and plastic. This clear liquid is c...view more DOUBLEMER® 321HT is an acrylic oligomer diluted with 50% BAC for applications requiring high gloss, high flexibility and improved adhesion to difficult substrates after UV curing. It provides excellent adhesion on metal and plastic. This clear liquid is characterized by its light color and tacky free property when removing BAC. Formulated UV/EB curable products containing DOUBLEMER® 321HT may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in the following applications: metal and plastic. It is also suitable for thermoforming after UV cure. view less
Borchi® OXY - Coat Borchers, A Company of OMG Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent resul...view more Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in all coatings which dry by oxidation, such as Alkyd, vegetable oils, epoxy esters, polybutadiene etc. view less