| PLACCEL 305T | Daicel (U.S.A.), Inc. | PLACCEL 305T is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon- caprolactone, control of hydroxyl group value is exact and there is no variation in qua...view more PLACCEL 305T is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon- caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305T is raw material of CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. In addition, it can improve hydrolytic stability than using PLACCEL 305 by its controlled low acid value. view less | |
| POLY-PALE | Univar Solutions | POLY-PALE is a pale, partially polymerized (dimerized) rosin. Compared with pale grades of regular wood, gum, or tall oil rosins, it has a higher softening point, higher viscosity (molten and in solution), much greater resistance to oxidation, and complet...view more POLY-PALE is a pale, partially polymerized (dimerized) rosin. Compared with pale grades of regular wood, gum, or tall oil rosins, it has a higher softening point, higher viscosity (molten and in solution), much greater resistance to oxidation, and complete freedom from crystallizing when in solid form or in solution. Its many uses include the preparation of varnishes, driers, synthetic resins, ink vehicles, floor tile, rubber compounds, solder fluxes, and various adhesives and protective coatings. view less | Request Sample |
| PLACCEL 305 | Daicel (U.S.A.), Inc. | PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quali...view more PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 305. view less | |
| PLACCEL 309 | Daicel (U.S.A.), Inc. | PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quali...view more PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 309 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 309. view less | |
| WorléeCryl 8545 | Worlée-Chemie G.m.b.H. | WorléeCryl 8545 is an acrylic emulsion supplied 50% in water. It is a polymeric emulsion produced as a basis for the manufacture of blister-lacquers. As sole component of the formulation at 80 °C a sealing is achieved. Films produced with W´Cryl 8545 are ...view more WorléeCryl 8545 is an acrylic emulsion supplied 50% in water. It is a polymeric emulsion produced as a basis for the manufacture of blister-lacquers. As sole component of the formulation at 80 °C a sealing is achieved. Films produced with W´Cryl 8545 are high gloss finished and sufficient water-resistant. W´Cryl 8545 is compatible with most acrylic resins. For the variation of the sealing properties, temperature and pressure we recommend a blend with W´Cryl 8290. To improve the film surface WorléeWax 8510 can be used without influence on the sealing properties. view less | |
| Sulfonex™ M-80 | Estron Chemical, Inc. | Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticize...view more Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticizers. Solutions of Sulfonex™ M-80 have a low viscosity and offer the advantage of formulating high solids lacquers. Sulfonex™ M-80 improves the compatibility of resins with plasticizers and pigments which may otherwise remain incompatible. In adhesives formulations, Sulfonex™ M-80 helps in bonding many substrates such as cellophane and aluminum foils to themselves or to paper. view less | |
| Flytac 188-C9-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9-100 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between...view more Flytac 188-C9-100 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. It is used as an important raw material for the production of paints, adhesives, rubber & inks industries. This product has a softening point (B&R) of 91.0-100.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. view less | |
| Flytac 188-C9-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9-110 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between...view more Flytac 188-C9-110 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300-3000. This product is used as an important raw material for the production of paints, adhesives, rubber & inks industries. This product has a softening point (B&R) of 101.0-110.0°C, an acid value of 0.5mg KOH/g max., a specific gravity of 1.06-1.09g/cm^3, and an ash level of 0.1% max. view less | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...view more Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. view less | |
| Torlon® AI-10 LM | Solvay Specialty Polymers | Torlon® AI-10 LM is a polyamide-imide (PAI) powder developed for the performance coatings industry. It is similar to Torlon® AI-10 in that it is produced using the same monomers and polymerization system. However, the manufacturing process has been optimi...view more Torlon® AI-10 LM is a polyamide-imide (PAI) powder developed for the performance coatings industry. It is similar to Torlon® AI-10 in that it is produced using the same monomers and polymerization system. However, the manufacturing process has been optimized to reduce the amount of residual methylene dianiline (MDA) monomer to below the 1000 ppm action level specified in various hazard communication regulations. The resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. view less | |
| UCECOAT® 7674 | Allnex | UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, i...view more UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT 7674 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| PVP K-15 | Ashland | PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-90 | Ashland | PVP K-90 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-90 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-30 | Ashland | PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric...view more Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. view less | |
| UCECOAT® 2801 | Allnex | UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is no...view more UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. This product contains no co-solvent. UCECOAT® 2801 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2801 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| Pluriol® A 700 VP | BASF Formulation Technologies | Pluriol® A 700 VP provides plasticizing functionality within the field of emulsion polymerization. Compatible with ethynically-unsaturated monomers, this readily-biodegradable comonomer efficiently reduces MFFT (minimum film formation temperatures) in for...view more Pluriol® A 700 VP provides plasticizing functionality within the field of emulsion polymerization. Compatible with ethynically-unsaturated monomers, this readily-biodegradable comonomer efficiently reduces MFFT (minimum film formation temperatures) in formulations, decreasing the need for coalescing agents without contributing to VOC content. The low Tg monomer (-70 C) is also capable of reducing viscosity of high-solids latex formulations while maintaining expected particle sizes. These distinctive performance factors make Pluriol A 700 VP a multifaceted tool for use in your next generation of EP formulating. view less | |
| CN9024 | Sartomer Americas | CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoe...view more CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoelastic properties. CN9024 has utility in a number of different applications including laminating and pressure sensitive adhesives, metal, plastic, and wood coatings, as well as flexo, litho, offset, screen, rotary screen, and letterpress inks. view less | |
| PLACCEL 210 | Daicel (U.S.A.), Inc. | PLACCEL 210 is general-purpose type polycaplolactone diol which is the molecular weight 1000. Since it is manufactured by the ring-opening-polymerization reaction of the diol with epsilon-caprolactone, control of hydroxyl group value is exact and there is...view more PLACCEL 210 is general-purpose type polycaplolactone diol which is the molecular weight 1000. Since it is manufactured by the ring-opening-polymerization reaction of the diol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 210 can be used as modifying agents, such as polyurethane, paint resin, and epoxy resin. Especially, the polyurethane of 210 bases is excellent in durability, hydrolysis resistance, oil resistance, heat resistance and low-temperature characteristics, and it can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. view less | |
| EBECRYL® 4250 | Allnex | EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymeriza...view more EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primers. view less | Request Sample |
| UCECOAT® 2802 | Allnex | UCECOAT® 2802 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is no...view more UCECOAT® 2802 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. This product contains no co-solvent. UCECOAT® 2802 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2802 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| CN9101 | Sartomer Americas | CN9101 is a 100% reactive, allylic functional aliphatic oligomer. CN9101 can be used in low temperature or photocured free radical polymerizations as a latent initiator or crosslinker to overcome surface tack due to air inhibiton. CN9101 can be used as a ...view more CN9101 is a 100% reactive, allylic functional aliphatic oligomer. CN9101 can be used in low temperature or photocured free radical polymerizations as a latent initiator or crosslinker to overcome surface tack due to air inhibiton. CN9101 can be used as a crosslinkerinitiator in 2-component peroxide cure coatings at ambient or elevated temperature. Tack-free dry times in 3 - 12 hours at ambient or 10-40 minutes at 65 to 120 °C are attainable. Coatings with good hardness development and good chemical resistance are produced. Suggested applications include: adhesives and peroxide cure adhesives, cast polymers, coatings and high solids peroxide cure coatings, composites, and open molding composites. view less | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...view more K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. view less | |
| EBECRYL® 8896 | Allnex | EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL®8896 is compatible with variety of fillers, pigments, waxes, and polymeric...view more EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL®8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL®8896’s intrinsic rubbery feel. view less | Request Sample |
| EBECRYL® 4857 | Allnex | EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility when cured by ultraviolet light (UV) or electron beam (EB). EBECRYL® 4857 is designed to show low yellowing and good outdoor resistance. Due to its low Tg EBECRYL® 4857 is also suitable for applications requiring haptic properties (e.g. “soft touch”). EBECRYL® 4857 is compatible with variety of fillers, pigments, waxes, and polymeric...view more EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility when cured by ultraviolet light (UV) or electron beam (EB). EBECRYL® 4857 is designed to show low yellowing and good outdoor resistance. Due to its low Tg EBECRYL® 4857 is also suitable for applications requiring haptic properties (e.g. “soft touch”). EBECRYL® 4857 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a smooth, silky to peachy feel. view less | Request Sample |
| Epokukdo YDB-410P | Kukdo Chemical Co., Ltd. | Epokukdo YDB-410P is a high brominated epoxy oligomer resin with higher molecular weight and offers an efficient flame retardancy. Because YDB-410P has lower softening point than bromine compounds, it tends to melt into resins and can be melt-blended more easily with almost all thermoplastic resins. This product is non-bleeding type flame retardant based on polymeric...view more Epokukdo YDB-410P is a high brominated epoxy oligomer resin with higher molecular weight and offers an efficient flame retardancy. Because YDB-410P has lower softening point than bromine compounds, it tends to melt into resins and can be melt-blended more easily with almost all thermoplastic resins. This product is non-bleeding type flame retardant based on polymeric tetrabromobisphenol-A epoxy resin which shows excellent properties in heat resistance, UV stability and mold fluidity. view less | |
| Epokukdo YDB-408 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-408 is a high brominated epoxy oligomer resin with higher molecular weight and offers an efficient flame retardancy. Because YDB-408 has lower softening point than bromine compounds, it tends to melt into resins and can be melt-blended more easily with almost all thermoplastic resins. This product is a non-bleeding type flame retardant based on polymeric...view more Epokukdo YDB-408 is a high brominated epoxy oligomer resin with higher molecular weight and offers an efficient flame retardancy. Because YDB-408 has lower softening point than bromine compounds, it tends to melt into resins and can be melt-blended more easily with almost all thermoplastic resins. This product is a non-bleeding type flame retardant based on polymeric tetrabromobisphenol-A epoxy resin which shows excellent properties in heat resistance, UV stability and mold fluidity. view less | |
| Epokukdo YDB-406 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-406 is a high brominated epoxy oligomer resin with higher molecular weight and offer an efficient flame retardancy. Because YDB-406 has a lower softening point than bromine compounds, it tends to melt into resins and can be melt-blended more easily with almost all thermoplastic resins. This product is a non-bleeding type flame retardant based on polymeric...view more Epokukdo YDB-406 is a high brominated epoxy oligomer resin with higher molecular weight and offer an efficient flame retardancy. Because YDB-406 has a lower softening point than bromine compounds, it tends to melt into resins and can be melt-blended more easily with almost all thermoplastic resins. This product is a non-bleeding type flame retardant based on polymeric tetrabromobisphenol-A epoxy resin which shows excellent properties in heat resistance, UV stability and mold fluidity. view less | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...view more Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. view less | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. view less | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. view less | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...view more Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. view less | |
| SUO-1811N | DKSH | SUO-1811N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1811N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1811N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1811N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1811N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1821N | DKSH | SUO-1821N is isocyanate bearing urethane acrylate UV and electron beam curing, two component polyurethane coatings, adhesion promoter in UV and electron beam curing coatings. SUO-1821N is combined with hydroxyl bearing resins to formulate coatings which c...view more SUO-1821N is isocyanate bearing urethane acrylate UV and electron beam curing, two component polyurethane coatings, adhesion promoter in UV and electron beam curing coatings. SUO-1821N is combined with hydroxyl bearing resins to formulate coatings which cure by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1821N are applied by spraying, curtain coating or roller coating. view less | Request Sample |
| SUO-1831N | DKSH | SUO-1831N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1831N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1831N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1831N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1831N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1841N | DKSH | SUO-1841N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1841N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1841N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1841N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1841N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1881N | DKSH | SUO-1881N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1881N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1881N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1881N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1881N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| EBECRYL® 4150 | Allnex | EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure proc...view more EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). The product is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal and exotic woods. view less | Request Sample |
| EBECRYL® 4396 | Allnex | EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formul...view more EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion on substrates such as plastic, metal and exotic woods. view less | Request Sample |
| DOUBLEMER® 421P | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 421P is a low viscosity, high purity, cycloaliphatic epoxide oligomer which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator which generates a cationic catalyst. Onium salt photoinitiators are used to ...view more DOUBLEMER® 421P is a low viscosity, high purity, cycloaliphatic epoxide oligomer which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator which generates a cationic catalyst. Onium salt photoinitiators are used to produce the cationic species on exposure to UV light, while remaining stable in the absence of UV light. Formulations containing DOUBLEMER® 421P, along with other epoxide resins and polyol modifiers, can provide a range of cured film properties. Coatings containing DOUBLEMER® 421P generally have excellent toughness, solvent resistance, and good adhesion to a variety of substrates, including metals and plastics. view less | |
| EBECRYL® 4510 | Allnex | EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It...view more EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV curing coatings to improve the adhesion on substrates as plastic, metal and exotic woods. view less | Request Sample |
| Maxemul 5010 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5010 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 5011 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and e...view more Maxemul 5011 - Copolymerizable Nonionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6106 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and el...view more Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| LumiSet™ LSR-141 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming r...view more LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. view less | |
| DOUBLEMER® 413P | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 413P is a cycloaliphatic epoxide oligomer that is characterized by its high curing speed, low viscosity, and cycloaliphatic epoxide oligomer, which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator. Thi...view more DOUBLEMER® 413P is a cycloaliphatic epoxide oligomer that is characterized by its high curing speed, low viscosity, and cycloaliphatic epoxide oligomer, which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator. This generates a cationic catalyst. Onium salt photoinitiators are used to produce the cationic species on exposure to UV light, while remaining stable in the absence of UV light. Formulations containing DOUBLEMER® 413P, along with other epoxide resins and polyol modifiers can provide a range of cured film properties. Coatings containing DOUBLEMER® 413P generally have excellent toughness, solvent resistance, and good adhesion to a variety of substrates, including metals and plastics. view less | |
| Zironate Coupling Agent FD‐NPZ | Zhejiang Feidian Chemical Co., Ltd. | Zironate Coupling Agent FD‐NPZ reacts with chelating agents and forms corresponding Zirconate chelate that has lower reactivity to meet certain reactivity requirements. FD‐NPZ is a Lewis acid and can be a good catalyst for most reactions such as esterification, transesterification, condensation reactions etc. It can also be used as Ziegler Natta catalyst in PP and PE polymerization. Due to its high reactivity, FD‐NPZ can react with lower reactivity functional group of binder...view more Zironate Coupling Agent FD‐NPZ reacts with chelating agents and forms corresponding Zirconate chelate that has lower reactivity to meet certain reactivity requirements. FD‐NPZ is a Lewis acid and can be a good catalyst for most reactions such as esterification, transesterification, condensation reactions etc. It can also be used as Ziegler Natta catalyst in PP and PE polymerization. Due to its high reactivity, FD‐NPZ can react with lower reactivity functional group of binder resin, such as –OH and –COOH on substrate and coating, At high temperature (>350oC) FD‐NPZ decomposes to form Zirconium dioxide (ZrO2) and forms thin layer on different substrates (glass, mineral, pigment, metal) and surface hardness and surface activity are improved. The chemical properties of FD‐NPZ is very similar to that of tetra‐n‐propyl titanate, however, zirconate does not cause yellowing problem. view less | |
| Emulsogen® EPA 073 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...view more Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. view less | |
| DOUBLEMER® 4250 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 4250 is characterized by its high curing speed, low viscosity, cycloaliphatic epoxide oligomer that undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator, which generates a cationic catalyst. Onium salt pho...view more DOUBLEMER® 4250 is characterized by its high curing speed, low viscosity, cycloaliphatic epoxide oligomer that undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator, which generates a cationic catalyst. Onium salt photoinitiators are used to produce the cationic species on exposure to UV light, while remaining stable in the absence of UV light. This product is a yellowish viscous liquid. Formulations containing DOUBLEMER® 4250, along with other epoxide resins and polyol modifiers, can provide a range of cured film properties. Coating containing DOUBLEMER® 4250 generally have excellent toughness, solvent resistance, and good adhesion to a variety of substrates, including metals and plastics. This product can be used for metal coatings, overprint varnishes, plastic coatings, PET film and keypad coating. view less |
