| 100 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 100 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 100 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 120 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 120 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 120 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 120N Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 120N Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...view more 120N Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 125 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 125 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 125 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 129 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 129 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 80% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 129 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 80% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 130A Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130A Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...view more 130A Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 130B Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130B Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...view more 130B Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 130H Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130H Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...view more 130H Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 130S Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130S Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...view more 130S Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 140 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 140 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 140 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 160 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 160 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 160 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 180 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 180 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 180 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 190 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 190 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 190-1 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-1 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...view more 190-1 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 190-2 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-2 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...view more 190-2 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 190-6 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-6 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...view more 190-6 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 190-8 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-8 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...view more 190-8 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 190-9 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-9 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...view more 190-9 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 2 Fast Green G | Hangzhou Jiekai Chemical Co., Ltd. | 2 Fast Green G is a dye in the phthalocyanine chemical family that can be used in paints, in inks, and in textile printing applications. This product's density is 1.6 g/cm3 and its pH value is 7.0. Its molecular weight ranges between 1029-1127. | |
| 220 Fast Red | Hangzhou Jiekai Chemical Co., Ltd. | 220 Fast Red is a red crystal powder inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 221 Pigment Violet | Hangzhou Jiekai Chemical Co., Ltd. | 221 Pigment Violet is a red crystal powder, inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 222 Fast Red | Hangzhou Jiekai Chemical Co., Ltd. | 222 Fast Red is a red crystal powder, inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 223 Fast Red | Hangzhou Jiekai Chemical Co., Ltd. | 223 Fast Red is a red crystal powder, inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 230 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 230 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...view more 230 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| 311 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 311 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 3110 Red Toner C | Hangzhou Jiekai Chemical Co., Ltd. | 3110 Red Toner C is a barium-complex dye that can be used in offset or transparent inks. This product's density is 1.8 g/cm3 and its pH value is 7.0. Its molecular weight is 888.98. | |
| 313 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 313 R Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 R Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 3135 Fast Red F2R | Hangzhou Jiekai Chemical Co., Ltd. | 3135 Fast Red F2R is a naphthol red pigment that can be used in aqueous inks and textile printing applications. This product's density is 1.7 g/cm3 and its pH value is 6.5. Its molecular weight is 436.29. | |
| 313S Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313S Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 318 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 318 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 330 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 330 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 90% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 5330 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 5330 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 90% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 586 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 586 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 587 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 587 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 722 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 722 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 723 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 723 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| Benzidine Orange R | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Orange R is a dianisidine dye that can be used in solvent inks, aqueous inks, and in aqueous coatings. This product's density is 1.4 g/cm3 and its pH value is 7.0. Its molecular weight is 620.72. | |
| Benzidine Yellow G | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow G is a diarylide yellow dye that can be used in offset inks, solvent inks, aqueous inks, and aqueous coatings. This product's density is 1.5 g/cm3 and its pH value is 6.5. Its molecular weight is 629.49. | |
| Benzidine Yellow GG | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow GG is a diarylide yellow dye that can be used in semi-transparent inks, aqueous inks, or aqueous coatings. This product's density is 1.5 g/cm3 and its pH value is 6.5. Its molecular weight is 629.49. | |
| Benzidine Yellow GR | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow GR is a diarylide yellow dye that can be used in aqueous or semi-transparent inks. This product's density is 1.5 g/cm3 and its pH value is 6.5. Its molecular weight is 629.49. | |
| Benzidine Yellow GR-B | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow GR-B is a diarylide yellow dye that can be used in semi-transparent inks, aqueous inks, and in aqueous coatings. This product's density is 1.5 g/cm3 and its pH value is 7.0. Its molecular weight is 685.60. | |
| Benzimidazolone Orange HL | Hangzhou Jiekai Chemical Co., Ltd. | Benzimidazolone Orange HL is a chlorinated azo dye that can be used in offset inks, solvent inks, aqueous inks, paints, and in textile printing applications. This product's density is 1.4 g/cm3 and its pH value is 6.5. Its molecular weight is 416.81. | |
| Brilliant Red 2BL | Hangzhou Jiekai Chemical Co., Ltd. | Brilliant Red 2BL is a calcium red dye that can be used in solventborne or transparent inks. This product's density is 1.8 g/cm3 and its pH value is 7.0. Its molecular weight is 458.90. | |
| Dark Chrome Yellow | Hangzhou Jiekai Chemical Co., Ltd. | Dark Chrome Yellow is a lead chromate dye that can be used in paints, printing inks, and in stationery. This product contains greater than 85% lead chromate and absorbs less than 20% oil. | |
| Dynoadd® D-960 | Dynoadd by Dynea | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...view more Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | |
| Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...view more Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...view more Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...view more Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...view more Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...view more Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining exce...view more Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining excellent clarity. Dynoadd® F-106 has applications as a automotive OEM clear coat. view less | |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...view more Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. view less | |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....view more Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. view less | |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...view more Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. view less | |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...view more Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...view more Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...view more Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. view less | |
| Dynoadd® F-409 | Dynoadd by Dynea | Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive si...view more Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive significantly reduces orange peel and improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-409 has applications in general industry and wood coatings. The additive is compatible with most solvent-borne and solvent-free radiation curing systems independent of oligomer chemistry. view less | |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...view more Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. view less | |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...view more Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. view less | |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | |
| Dynoadd® F-470 | Dynoadd by Dynea | Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated ...view more Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-470 does not reduce transparency and is recommended for clear coats. Dynoadd® F-470 contains a lower level of fluoro polymer. view less | |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...view more Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...view more Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. view less | |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in ...view more Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. This product has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-701B can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. view less | |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...view more Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...view more Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...view more Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F...view more Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F-711 is effective in polyester or alkyd-melamine, 2K-PU and 2K-Acrylic formulations. It has applications in automotive refinish coatings, coil coatings, and industrial coatings. view less | |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...view more Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. view less | |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...view more Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. view less | |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less | |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...view more Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. view less | |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...view more Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. view less | |
| Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-530 has a particle size of 30 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-540 has a particle size of 40 microns.The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...view more Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. view less | |
| F120 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | F120 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...view more F120 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. view less | |
| Fast Blue B | Hangzhou Jiekai Chemical Co., Ltd. | Fast Blue B is a dye in the alpha-phthalocyanine chemical family that can be used in offset inks, aqueous inks, and in paint applications. This product's density is 1.5 g/cm3 and its pH value is 7.0. Its molecular weight is 576.07. | |
| Fast Blue BGNCF | Hangzhou Jiekai Chemical Co., Ltd. | Fast Blue BGNCF is a dye in the beta-phthalocyanine chemical family that can be used in anti-crystallizing, anti-flocculating, and complex inks. This product's density is 1.5 g/cm3 and its pH value is 7.0. Its molecular weight is 576.07. | |
| Fast Blue BGS | Hangzhou Jiekai Chemical Co., Ltd. | Fast Blue BGS is a dye in the beta-phthalocyanine chemical family that can be used in offset ink applications. This product's density is 1.5 g/cm3 and its pH value is 7.0. Its molecular weight is 576.07. | |
| Fast Blue BS | Hangzhou Jiekai Chemical Co., Ltd. | Fast Blue BS is a dye in the alpha-phthalocyanine chemical family that can be used in paints and in inks. This product's density is 1.5 g/cm3 and its pH value is 7.0. Its molecular weight ranges between 576-610. | |
| Fast Blue Lake BO | Hangzhou Jiekai Chemical Co., Ltd. | Fast Blue Lake BO is a triphenylmethane dye that can be used in aqueous inks, solvent inks, and offset ink applications. This product's density is 1.6 g/cm3 and its pH value is 7.0. | |
| Fast Blue Toner | Hangzhou Jiekai Chemical Co., Ltd. | Fast Blue Toner is a triphenylmethane dye that can be used in offset inks, aqueous inks, and solvent ink applications. This product's density is 1.6 g/cm3 and its pH value is 7.0. | |
| Fast Carmine HFM | Hangzhou Jiekai Chemical Co., Ltd. | Fast Carmine HFM is a benzimidazolone dye that can be used in offset inks, solvent inks, aqueous inks, paints, and textile printing applications. This product's density is 1.4 g/cm3 and its pH value is 7.0. Its molecular weight is 498.45. | |
| Fast Green G | Hangzhou Jiekai Chemical Co., Ltd. | Fast Green G is a dye in the phthalocyanine chemical family that can be used in paints and in inks. This product's density is 1.6 g/cm3 and its pH value is 7.0. Its molecular weight ranges between 1029-1127. | |
| Fast Molybdate Chrome Red F210 | Hangzhou Jiekai Chemical Co., Ltd. | Fast Molybdate Chrome Red F210 is a lead chromate dye that can be used in paints, printing inks, and stationery applications. This product contains greater than 70% lead chromate and can withstand temperatures up to 180 degrees Celsius. | |
| Fast Molybdate Chrome Red F310 | Hangzhou Jiekai Chemical Co., Ltd. | Fast Molybdate Chrome Red F310 is a lead chromate dye that can be used in paints, printing inks, and in stationery applications. This product contains greater than 70% lead chromate and it can withstand temperatures up to 180 degrees Celsius. | |
| Fast Orange G | Hangzhou Jiekai Chemical Co., Ltd. | Fast Orange G is a pyrazolone dye that can be used in transparent inks and in solvent inks. This product's density is 1.5 g/cm3 and its pH value is 7.0. Its molecular weight is 623.48. | |
| Fast Orange GR | Hangzhou Jiekai Chemical Co., Ltd. | Fast Orange Gr is a pyrazolone orange dye that can be used in solvent inks, aqueous inks, and aqueous coatings. This product's density is 1.5 g/cm3 and its pH value is 7.0. | |
| Fast Orange RL | Hangzhou Jiekai Chemical Co., Ltd. | Fast Orange RL is a diarylide orange dye that can be used in solvent inks, transparent inks, aqueous inks, and in aqueous coatings. This product's density is 1.4 g/cm3 and its pH value is 6.5. Its molecular weight is 651.60. | |
| Fast Orange RN | Hangzhou Jiekai Chemical Co., Ltd. | Fast Orange RN is a dinitraniline dye that can be used in aqueous inks and in air drying paints. This product's density is 1.4 and its pH value is 5.5. Its molecular weight is 338.27. | |
| Fast Pink Lake | Hangzhou Jiekai Chemical Co., Ltd. | Fast Pink Lake is an anthraquinone dye that can be used in low-viscosity offset inks. This product's density is 1.7 g/cm3 and its pH value is 7.0. |
