| BIT-10 | Dalian Bio-Chem Co., Ltd. | BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1. | |
| BIT-20 | Dalian Bio-Chem Co., Ltd. | BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2. | |
| CIT/MIT-14M | Dalian Bio-Chem Co., Ltd. | CIT/MIT-14M is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paints, adhesives, inks, and dyes. This product is not combustible and is VOC-free. | |
| Ottopol 1320 | Gellner Industrial, LLC | Ottopol 1320 is a medium hard, tough, all anionic acrylic emulsion with outstanding chemical, abrasion and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. | |
| Ottopol 1450 | Gellner Industrial, LLC | Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blen...view more Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blends. view less | |
| Ottopol 151 | Gellner Industrial, LLC | Ottopol 151 is an anionic acrylic emulsion. | |
| Ottopol 1960 | Gellner Industrial, LLC | Ottopol 1960 anionic acrylic emulsion is a high solids binder suitable for high performance sealants, patching compounds and contact adhesives as well as coating formulations. | |
| Ottopol 25-30 | Gellner Industrial, LLC | Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-grap...view more Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 25-50 | Gellner Industrial, LLC | Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-g...view more Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 25-50E | Gellner Industrial, LLC | Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic ink...view more Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 300 | Gellner Industrial, LLC | Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acry...view more Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acrylic polymers. view less | |
| Ottopol 503 | Gellner Industrial, LLC | Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coat...view more Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coating. view less | |
| Ottopol 510-28 | Gellner Industrial, LLC | Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as ...view more Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as well as excellent solvent, salt fog, and alkali-resistance. Ottopol 510-28 offers good adhesion to non-porous surfaces and provides better storage stability, superior hardness, and improved flow. It imparts superb weatherability and improved solubility. view less | |
| Ottopol 523 | Gellner Industrial, LLC | Ottopol 523 is an anionic hydroxyl functional acrylic emulsion. The functionality allows the polymer to cross-link with melamine or aziridine. The use of aziridine will result in a short pot life and will cross-link at room temperature. Formulations using...view more Ottopol 523 is an anionic hydroxyl functional acrylic emulsion. The functionality allows the polymer to cross-link with melamine or aziridine. The use of aziridine will result in a short pot life and will cross-link at room temperature. Formulations using aziridine will require a plasticizer or coalescent solvent to aid the film formation of the dried coating. Formulations using melamine and PTSA (Para-Toluene Sulfonic Acid) are stable for a minimum of thirty days. The starting formulation requires a web temperature of 180 degrees Fahrenheit to activate cross-linking of the resins. An increase in PTSA will lower the temperature required to activate cross-linking. Larger amounts of PTSA will increase the hardness of the dry film. There are no plasticizers or coalescent aids required for film formation when using a melamine resin with Ottopol 523. view less | |
| Ottopol G-35 | Gellner Industrial, LLC | Ottopol G-35 is an acrylic resin solution, water based industrial polymer. Its unique characteristics impart excellent flow and leveling to inks and coatings, making gravure print quality possible. The viscosity curve of this resin is relatively flat and ...view more Ottopol G-35 is an acrylic resin solution, water based industrial polymer. Its unique characteristics impart excellent flow and leveling to inks and coatings, making gravure print quality possible. The viscosity curve of this resin is relatively flat and shows a very low degree of thixotropy resulting in a superior printing quality. Ottopol G-35 has excellent high gloss as well as good pigment wetting. Optimum color development is achievable with a large variety of pigments. view less | |
| Ottopol K-23 | Gellner Industrial, LLC | Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion character...view more Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion characteristics provide higher solids and better gloss. Positive charge allows inks and coatings made with Ottopol K-23 to have exceptionally good adhesion to plastic films such as polyethylene, PVC, polyester, and polystyrene. view less | |
| Ottopol K-362 | Gellner Industrial, LLC | Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down...view more Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. Due to its positive charge, Ottopol K-362 allows inks and coatings to have excellent adhesion to plastic films such as mylar, PVC, and polystyrene, as well as to foil and other metallic surfaces. view less | |
| Ottopol K-633 | Gellner Industrial, LLC | Ottopol K-633 is a low molecular weight cationic acrylic resin solution. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings. A clear...view more Ottopol K-633 is a low molecular weight cationic acrylic resin solution. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin is impermeable to alkali without the use of cross-linking agents. The positive charge allows inks and coatings using Ottopol K-633 allows exceptionally good adhesion to plastic films. view less | |
| Ottopol K-65 | Gellner Industrial, LLC | Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...view more Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-65 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. view less | |
| Ottopol K-66 | Gellner Industrial, LLC | Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...view more Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-66 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. view less | |
| Ottopol K-672 | Gellner Industrial, LLC | Ottopol K-672 is a hydroxyl functional cationic acrylic emulsion polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. The fastest and most resistant coating can be formulated with the combination of polyisocyana...view more Ottopol K-672 is a hydroxyl functional cationic acrylic emulsion polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. The fastest and most resistant coating can be formulated with the combination of polyisocyanate and an epoxy silane. We recommend a maximum of 11.5% epoxy silane based on solids. Detergents and cleaners will not remove this film. Water resistance is excellent. The dried film will also resist staining. view less | |
| Ottopol KO | Gellner Industrial, LLC | Ottopol KO is a cationic styrene/acrylic emulsion. It blocks tannin oils, stains on drywall, water stains from concrete blocks, and fungal growth in damp or humid environments. It has excellent adhesion. | |
| Ottopol KX-101 | Gellner Industrial, LLC | Ottopol KX-101 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing ha...view more Ottopol KX-101 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing happens very quickly, in 15 minutes the film will have excellent water resistance. Allowing the film to cure for four hours will result in a film that has over 100 double rubs acetone resistance and also resists staining. Detergents and cleaners will not remove this film. Ottopol KX-101 is still in the experimental stage. view less | |
| Ottopol M-30 | Gellner Industrial, LLC | Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordina...view more Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordinary compatibility with basic dyes and fluorescent pigments. Fluorescent inks made from this product show no pH swing, which causes stability problems in other vehicle systems. view less | |
| Ottopol M-49 | Gellner Industrial, LLC | Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA doe...view more Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA does not promote the tarnishing of metallic pigments. The product has been proven to provide good aging stability and compatibility with additives and other resin systems. view less | |
| Ottopol S-100 | Gellner Industrial, LLC | Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and ...view more Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin provides non-curling properties on paper. view less | |
| Ottopol S-30 | Gellner Industrial, LLC | Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gr...view more Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. view less | |
| Ottopol S-50 | Gellner Industrial, LLC | Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gr...view more Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. view less | |
| Ottopol S-75 | Gellner Industrial, LLC | Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gr...view more Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. view less | |
| Ottopol SF 49 | Gellner Industrial, LLC | Ottopol SF 49 is a self crosslinking acrylic emulsion that has outstanding water resistance and will not blush even after prolonged exposure to water. It can be formulated into a corrosion resistant primer or semi-gloss paint. | |
| Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
| Ottopol SX-100 | Gellner Industrial, LLC | Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using...view more Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require a hard film. Due to the internally cross-linking mechanism, Ottopol SX-100's block and scuff resistance is improved over conventional vehicles. It also provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of this product provides a high gloss finish and non-curling properties on paper. view less | |
| Ottopol SX-30 | Gellner Industrial, LLC | Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...view more Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-30 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. The resin provides non-curling properties on paper. view less | |
| Ottopol SX-50 | Gellner Industrial, LLC | Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...view more Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-50 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-50's block and scuff resistance is improved over conventional vehicles. view less | |
| Ottopol SX-75 | Gellner Industrial, LLC | Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...view more Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-75 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-75's block and scuff resistance is improved over conventional vehicles. view less | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...view more Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. view less | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...view more Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...view more Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. view less | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...view more Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. view less | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...view more Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. view less | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...view more Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. view less | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...view more Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. view less |
