| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...view more Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. view less | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...view more Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...view more Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. view less | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...view more Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. view less | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...view more Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. view less | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Surfadol® 331 Pigment Dispersing Agent | ACME | Surfadol® 331 is a 80% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 8-11. Silicone free, APEO free. | |
| Surfadol® 333 Pigment Dispersing Agent | ACME | Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named...view more Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named Surfadol® 333W. view less | |
| Surfadol® 333W Pigment Dispersing Agent | ACME | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
| Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME | Surfadol® 420 is a 100% active liquid low-foam wetting agent (HLB: 4). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This p...view more Surfadol® 420 is a 100% active liquid low-foam wetting agent (HLB: 4). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. view less | |
| Surfadol® 440 Surfactant | ACME | Surfadol® 440 is a 100% active liquid low-foam wetting agent (HLB: 8). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This p...view more Surfadol® 440 is a 100% active liquid low-foam wetting agent (HLB: 8). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. view less | |
| Surfadol® 465 Surfactant | ACME | Surfadol® 465 is a 100% active liquid low-foam wetting agent (HLB: 13). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This ...view more Surfadol® 465 is a 100% active liquid low-foam wetting agent (HLB: 13). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. view less | |
| Surfadol® 518 | ACME | Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting f...view more Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. view less | |
| Surfadol® 520 | ACME | Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-...view more Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. view less | |
| Surfadol® 532 | ACME | Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-f...view more Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. view less | |
| Surfadol® 532B | ACME | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...view more Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. view less | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME | Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a...view more Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a number of solvent cuts as well as powdered forms. It is silicone and APE-free. view less | |
| Surfadol® 541E Surfactant | ACME | Surfadol® 541E is a 50% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applic...view more Surfadol® 541E is a 50% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. view less | |
| Surfadol® 541H Surfactant | ACME | Surfadol® 541H is a 75% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applic...view more Surfadol® 541H is a 75% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. view less | |
| Surfadol® 541PA Surfactant | ACME | Surfadol® 541PA is a 50% active liquid (Isopropyl Alcohol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical app...view more Surfadol® 541PA is a 50% active liquid (Isopropyl Alcohol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. view less | |
| Surfadol® 550 | ACME | Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fre...view more Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. view less | |
| Surfadol® 550P | ACME | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...view more Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. view less | |
| Surfadol® DF-59 | ACME | Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, ...view more Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is solvent and APE-free. view less | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...view more Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. view less | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...view more Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. view less |
