| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...view more ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. view less | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...view more EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. view less | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...view more HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. view less | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...view more IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. view less | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...view more IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. view less | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...view more IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. view less | Request Sample |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...view more VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. view less | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....view more VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. view less | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...view more VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. view less | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...view more VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. view less | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...view more VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. view less | Request Sample |
| VINAVIL® 2841 | VINAVIL Americas Corp. | VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for film...view more VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for films, double-sided tapes, foams, textiles and labels. It can also be used in floor adhesives and in textile screen printing applications. This product coats well on silicone-coated release paper. view less | |
| VINAVIL® 5810 | VINAVIL Americas Corp. | VINAVIL® 5810, in the form of a clear, flexible film, is a surfactant-stabilized all acrylic polymer emulsion that can be used in coatings, as a driveway sealer, and in the construction, paper, and textile printing industries. It can also be used in inte...view more VINAVIL® 5810, in the form of a clear, flexible film, is a surfactant-stabilized all acrylic polymer emulsion that can be used in coatings, as a driveway sealer, and in the construction, paper, and textile printing industries. It can also be used in interior or exterior wall paints and plasters. This product has low viscosity and is weather-resistant. view less | |
| VINAVIL® 5815 | VINAVIL Americas Corp. | VINAVIL® 5815, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives, as a cement additive, and in textile printing applicati...view more VINAVIL® 5815, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives, as a cement additive, and in textile printing applications. This product is compatible with cement adhesives and additives that are used in the formulations of coatings or adhesives. view less | |
| VINAVIL® 5816 | VINAVIL Americas Corp. | VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing memb...view more VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing membranes and in textile printing applications. This product is compatible with cement adhesives as well as additives used in coating or adhesive formulations. view less | |
| VINAVIL® CRILAT 1815 | VINAVIL Americas Corp. | VINAVIL® CRILAT 1815, in the form of a transparent, colourless film, is an aqueous dispersion of a soft, self-crosslinkable acrylic polymer. This product is dispersed in an anionic/non-ionic surfactant, and can be used in gloss paints, enamels, and as a ...view more VINAVIL® CRILAT 1815, in the form of a transparent, colourless film, is an aqueous dispersion of a soft, self-crosslinkable acrylic polymer. This product is dispersed in an anionic/non-ionic surfactant, and can be used in gloss paints, enamels, and as a pigment binder in textile screen printing applications. It is resistant to chlorinated solvents. view less | |
| VINAVIL® K40 | VINAVIL Americas Corp. | VINAVIL® K40, in the form of a transparent bead, is a solid homopolymer of vinyl acetate that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, ...view more VINAVIL® K40, in the form of a transparent bead, is a solid homopolymer of vinyl acetate that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
| VINAVIL® K50 | VINAVIL Americas Corp. | VINAVIL® K50, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments,...view more VINAVIL® K50, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
| VINAVIL® K55 | VINAVIL Americas Corp. | VINAVIL® K55, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments,...view more VINAVIL® K55, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less |
