| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...view more ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. view less | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...view more EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. view less | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...view more HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. view less | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...view more IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. view less | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...view more IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. view less | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...view more IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. view less | Request Sample |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...view more VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. view less | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....view more VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. view less | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...view more VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. view less | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...view more VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. view less | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...view more VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. view less | Request Sample |
| Yipin® Apple Green Y9435 | Yipin Pigments, Inc. | Yipin® Apple Green Y9435 is a green pearlescent pigment in powder form. It has good heat and light resistance and provides a bright green luster. This product can be used in a variety of coating and ink applications. | |
| Yipin® Blackish Green Y9408 | Yipin Pigments, Inc. | Yipin® Blackish Green Y9408 is a very dark green pearlescent pigment in powder form. It has good heat and light resistance and provides a bright silver luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Blue D7079 | Yipin Pigments, Inc. | Yipin® Blue D7079 is a blue beta phthalocyanine pigment in powder form. It has a pH value of 6.5-8, a density of 1.59 g/cm³, and a specific surface area of 62 m²/g. This product can be use in ink applications. | |
| Yipin® Blue FR6840 | Yipin Pigments, Inc. | Yipin® Blue FR6840 is a blue alpha unstable phthalocyanine pigment in powder form. It has a pH value of 5.8-8, a density of 1.6 g/cm³, and a specific surface area of 66 m²/g. This product can be used in water-based ink applications. | |
| Yipin® Blue Pearl Y9225 | Yipin Pigments, Inc. | Yipin® Blue Pearl Y9225 is a blue pearlescent pigment in powder form. It has good heat and light resistance and provides a bright blue luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Bronze Satin Y9520 | Yipin Pigments, Inc. | Yipin® Bronze Satin Y9520 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a satin bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Bronze Y9500 | Yipin Pigments, Inc. | Yipin® Bronze Y9500 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a bright bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Bronze-Brown Y9410 | Yipin Pigments, Inc. | Yipin® Bronze-Brown Y9410 is a brown-bronze pearlescent pigment in powder form. It has good heat and light resistance and provides a bright bronze-brown luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Brown-Red Y9502 | Yipin Pigments, Inc. | Yipin® Brown-Red Y9502 is a brown-red, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a bright brown-red luster. This product can be used in coating and ink applications. | |
| Yipin® Chrome Orange 115N | Yipin Pigments, Inc. | Yipin® Chrome Orange 115N is an orange-yellow lead chromate pigment in powder form. It has a pH value of 4-8 and is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. | |
| Yipin® Deep Chrome Yellow 124 | Yipin Pigments, Inc. | Yipin® Deep Chrome Yellow 124 is a yellow lead chromate pigment in powder form. It is stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. | |
| Yipin® Fine Gold Satin Y9201 | Yipin Pigments, Inc. | Yipin® Fine Gold Satin Y9201 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a satin yellow luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Glitter Bronze Y9530 | Yipin Pigments, Inc. | Yipin® Glitter Bronze Y9530 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a shimmery, flashing bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Glitter Gold Y9355 | Yipin Pigments, Inc. | Yipin® Glitter Gold Y9355 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a sparkling, flashing golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Gold Pearl Y9300 | Yipin Pigments, Inc. | Yipin® Gold Pearl Y9300 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a bright pearl golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Gold Satin Y9302 | Yipin Pigments, Inc. | Yipin® Gold Satin Y9302 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a stain satin golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Green Chrome SGC | Yipin Pigments, Inc. | Yipin® Green Chrome SGC is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be u...view more Yipin® Green Chrome SGC is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Green Chrome SGC-M | Yipin Pigments, Inc. | Yipin® Green Chrome SGC-M is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.1%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be...view more Yipin® Green Chrome SGC-M is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.1%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Green Chrome SGN | Yipin Pigments, Inc. | Yipin® Green Chrome SGN is a green chrome oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.1%, and a pH value of 6-8. It is very stable with strong tinting capabilities. This product can be use...view more Yipin® Green Chrome SGN is a green chrome oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.1%, and a pH value of 6-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Green Chrome SGP | Yipin Pigments, Inc. | Yipin® Green Chrome SGP is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be u...view more Yipin® Green Chrome SGP is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Green Pearl Y9235 | Yipin Pigments, Inc. | Yipin® Green Pearl Y9235 is a green pearlescent pigment in powder form. It has a particle size range of 10-60 µm, water soluble content of no more than 0.3%, and a pH value of 6-9. It has good heat and light resistance and provides a bright green luster t...view more Yipin® Green Pearl Y9235 is a green pearlescent pigment in powder form. It has a particle size range of 10-60 µm, water soluble content of no more than 0.3%, and a pH value of 6-9. It has good heat and light resistance and provides a bright green luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black 353 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 353 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is...view more Yipin® Iron Oxide Black 353 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black 357 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 357 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 95%. It is very stable with good tinting capabiliti...view more Yipin® Iron Oxide Black 357 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 95%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black 370 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 370 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is v...view more Yipin® Iron Oxide Black 370 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black 723 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 723 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is v...view more Yipin® Iron Oxide Black 723 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black 733J | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 733J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is ...view more Yipin® Iron Oxide Black 733J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black S722A | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S722A is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It ...view more Yipin® Iron Oxide Black S722A is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black S722J | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S722J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of 0.5%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable ...view more Yipin® Iron Oxide Black S722J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of 0.5%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black S733-DG | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S733-DG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron ...view more Yipin® Iron Oxide Black S733-DG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 87%. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Black S733-WG | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S733-WG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron ...view more Yipin® Iron Oxide Black S733-WG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 87%. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Brown S610 | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S610 is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilit...view more Yipin® Iron Oxide Brown S610 is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Brown S660(860) | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S660(860) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capa...view more Yipin® Iron Oxide Brown S660(860) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Brown S686(868) | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S686(868) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capa...view more Yipin® Iron Oxide Brown S686(868) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S110 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S110 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 94%, and a predominant particle size of about 0.1 µm. It i...view more Yipin® Iron Oxide Red S110 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 94%, and a predominant particle size of about 0.1 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S120 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S120 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.1 µm. It ...view more Yipin® Iron Oxide Red S120 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.1 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S130-1 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S130-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.2 µm. I...view more Yipin® Iron Oxide Red S130-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S130-DG | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S130-DG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxid...view more Yipin® Iron Oxide Red S130-DG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 90%. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S130-WG | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S130-WG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 3-7, and iron ox...view more Yipin® Iron Oxide Red S130-WG is a granular, synthetic red iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 3-7, and iron oxide content of at least 90%. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S140 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S140 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.3 µm. I...view more Yipin® Iron Oxide Red S140 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.3 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S180 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S180 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.5 µm. I...view more Yipin® Iron Oxide Red S180 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.5 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Red S190-1 | Yipin Pigments, Inc. | Yipin® Iron Oxide Red S190-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.4 µm....view more Yipin® Iron Oxide Red S190-1 is a synthetic red iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of around 0.4 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Yellow S313-1 | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S313-1 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 86%. It is very stable with good tinting capab...view more Yipin® Iron Oxide Yellow S313-1 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 86%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Yellow S920 | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S920 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting capab...view more Yipin® Iron Oxide Yellow S920 is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Yellow S930(313) | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S930(313) is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting ...view more Yipin® Iron Oxide Yellow S930(313) is a synthetic yellow iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, and iron oxide content of at least 86%. It is very stable with good tinting capabilities and an iron oxide content of 86 percent. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Yellow S930(313)-DG | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S930(313)-DG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 4-7, an...view more Yipin® Iron Oxide Yellow S930(313)-DG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 4-7, and iron oxide content of at least 83%. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Yellow S930(313)-WG | Yipin Pigments, Inc. | Yipin® Iron Oxide Yellow S930(313)-WG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 4-7, ...view more Yipin® Iron Oxide Yellow S930(313)-WG is a granular, synthetic yellow iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4.0%, a pH value of 4-7, and iron oxide content of at least 83%. This product can be used in coating and ink applications. view less | |
| Yipin® Iron Oxide Yellow S960 | Yipin Pigments, Inc. | Yipin® Iron Oxide Orange S960 is a synthetic orange iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capab...view more Yipin® Iron Oxide Orange S960 is a synthetic orange iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. view less | |
| Yipin® Lemon Chrome Yellow 501 | Yipin Pigments, Inc. | Yipin® Lemon Chrome Yellow 501 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product...view more Yipin® Lemon Chrome Yellow 501 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Lemon Chrome Yellow 502 | Yipin Pigments, Inc. | Yipin® Lemon Chrome Yellow 502 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product...view more Yipin® Lemon Chrome Yellow 502 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Lemon Chrome Yellow 561 | Yipin Pigments, Inc. | Yipin® Lemon Chrome Yellow 561 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product...view more Yipin® Lemon Chrome Yellow 561 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Luster Blue Y9400 | Yipin Pigments, Inc. | Yipin® Luster Blue Y9400 is a blue pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright silver luste...view more Yipin® Luster Blue Y9400 is a blue pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright silver luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Magic Violet Y9419 | Yipin Pigments, Inc. | Yipin® Magic Violet Y9419 is a violet pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright violet lu...view more Yipin® Magic Violet Y9419 is a violet pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright violet luster. This product can be used in coating and ink applications. view less | |
| Yipin® Medium Chrome Yellow 103 | Yipin Pigments, Inc. | Yipin® Medium Chrome Yellow 103 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This produc...view more Yipin® Medium Chrome Yellow 103 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Medium Chrome Yellow 803 | Yipin Pigments, Inc. | Yipin® Medium Chrome Yellow 803 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This produc...view more Yipin® Medium Chrome Yellow 803 is a yellow lead chromate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Molybdate Red 107 | Yipin Pigments, Inc. | Yipin® Molybdate Red 107 is a red lead chromate molybdate pigment in the form of a powder. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. Th...view more Yipin® Molybdate Red 107 is a red lead chromate molybdate pigment in the form of a powder. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Molybdate Red 207 | Yipin Pigments, Inc. | Yipin® Molybdate Red 207 is a red lead chromate molybdate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This produc...view more Yipin® Molybdate Red 207 is a red lead chromate molybdate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Molybdate Red 307 | Yipin Pigments, Inc. | Yipin® Molybdate Red 307 is a red lead chromate molybdate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This produc...view more Yipin® Molybdate Red 307 is a red lead chromate molybdate pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.3%, and a pH value of 4-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. view less | |
| Yipin® Nut-Brown Y9411 | Yipin Pigments, Inc. | Yipin® Nut-Brown Y9411 is a brown pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, flake particle shape, and a particle range of 10-60 µm. It offers good heat and light resistance and provides a bri...view more Yipin® Nut-Brown Y9411 is a brown pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, flake particle shape, and a particle range of 10-60 µm. It offers good heat and light resistance and provides a bright brown luster. This product can be used in coating and ink applications. view less | |
| Yipin® Olympic Gold Y9306 | Yipin Pigments, Inc. | Yipin® Olympic Gold Y9306 is a gold pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright olympic gol...view more Yipin® Olympic Gold Y9306 is a gold pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright olympic golden luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Platinum Pearl Y9205 | Yipin Pigments, Inc. | Yipin® Platinum Pearl Y9205 is a platinum pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright gold ...view more Yipin® Platinum Pearl Y9205 is a platinum pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright gold luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Red Pearl Y9215 | Yipin Pigments, Inc. | Yipin® Red Pearl Y9215 is a red pearlescent pigment in powder form. It has water soluble content of 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright red luster to desired formul...view more Yipin® Red Pearl Y9215 is a red pearlescent pigment in powder form. It has water soluble content of 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright red luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Rose Red Y9418 | Yipin Pigments, Inc. | Yipin® Rose Red Y9418 is a red pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright red luster. This...view more Yipin® Rose Red Y9418 is a red pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright red luster. This product can be used in coating and ink applications. view less | |
| Yipin® Royal Gold Y9303 | Yipin Pigments, Inc. | Yipin® Royal Gold Y9303 is a gold pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright, royalty gold...view more Yipin® Royal Gold Y9303 is a gold pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright, royalty golden luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Silver Gray Y9407 | Yipin Pigments, Inc. | Yipin® Silver Gray Y9407 is a silver-gray pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, flake particle shape, and a particle size range of 10-60 µm. It offers good heat and light resistance and p...view more Yipin® Silver Gray Y9407 is a silver-gray pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, flake particle shape, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright silver luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Silver White Pearl Y9100 | Yipin Pigments, Inc. | Yipin® Silver White Pearl Y9100 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a brig...view more Yipin® Silver White Pearl Y9100 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright silver white luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Silver White Pearl Y9101 | Yipin Pigments, Inc. | Yipin® Silver White Pearl Y9101 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size of 30-70 µm. It offers good heat and light resistance and provides a flashing s...view more Yipin® Silver White Pearl Y9101 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size of 30-70 µm. It offers good heat and light resistance and provides a flashing silver white luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Silver White Pearl Y9110 | Yipin Pigments, Inc. | Yipin® Silver White Pearl Y9110 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a typical particle size of less than 15 µm. It offers good heat and light resistance and provid...view more Yipin® Silver White Pearl Y9110 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a typical particle size of less than 15 µm. It offers good heat and light resistance and provides a smooth silver white luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Silver White Pearl Y9120 | Yipin Pigments, Inc. | Yipin® Silver White Pearl Y9120 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 5-25 µm. It offers good heat and light resistance and provides a satin...view more Yipin® Silver White Pearl Y9120 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 5-25 µm. It offers good heat and light resistance and provides a satin silver white luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Silver White Pearl Y9151 | Yipin Pigments, Inc. | Yipin® Silver White Pearl Y9151 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-100 µm. It offers good heat and light resistance and provides a shi...view more Yipin® Silver White Pearl Y9151 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-100 µm. It offers good heat and light resistance and provides a shimmery silver white luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Silver White Pearl Y9173 | Yipin Pigments, Inc. | Yipin® Silver White Pearl Y9173 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-40 µm. It offers good heat and light resistance and provides a spec...view more Yipin® Silver White Pearl Y9173 is a silver-white pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-40 µm. It offers good heat and light resistance and provides a specular silver white luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Sunny Gold Y9351 | Yipin Pigments, Inc. | Yipin® Sunny Gold Y9351 is a gold pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-100 µm. It offers good heat and light resistance and provides a shimmery sunshine g...view more Yipin® Sunny Gold Y9351 is a gold pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-100 µm. It offers good heat and light resistance and provides a shimmery sunshine golden luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Ultramarine Blue U02 | Yipin Pigments, Inc. | Yipin® Ultramarine Blue U02 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.5%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product c...view more Yipin® Ultramarine Blue U02 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.5%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product can be used in paint, ink, and printing applications. view less | |
| Yipin® Ultramarine Blue U03 | Yipin Pigments, Inc. | Yipin® Ultramarine Blue U03 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product c...view more Yipin® Ultramarine Blue U03 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product can be used in paint, ink, and printing applications. view less | |
| Yipin® Ultramarine Blue U04 | Yipin Pigments, Inc. | Yipin® Ultramarine Blue U04 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product c...view more Yipin® Ultramarine Blue U04 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product can be used in paint, ink, and printing applications. view less | |
| Yipin® Ultramarine Blue U06 | Yipin Pigments, Inc. | Yipin® Ultramarine Blue U06 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product c...view more Yipin® Ultramarine Blue U06 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product can be used in paint, ink, and printing applications. view less | |
| Yipin® Ultramarine Blue U08 | Yipin Pigments, Inc. | Yipin® Ultramarine Blue U08 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product c...view more Yipin® Ultramarine Blue U08 is an ultramarine blue pigment in powder form. It has water soluble content of no more than 1.5%, sieve residue of no more than 0.1%, and a pH value of 7.5-10. It offers good heat, weather, and alkali resistance. This product can be used in paint, ink, and printing applications. view less | |
| Yipin® Violet Pearl Y9219 | Yipin Pigments, Inc. | Yipin® Violet Pearl Y9219 is a violet pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright purple lu...view more Yipin® Violet Pearl Y9219 is a violet pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright purple luster to desired formulations. This product can be used in coating and ink applications. view less | |
| Yipin® Wine Red Y9504 | Yipin Pigments, Inc. | Yipin® Wine Red Y9504 is a red, micaceous iron, pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright...view more Yipin® Wine Red Y9504 is a red, micaceous iron, pearlescent pigment in powder form. It has water soluble content of no more than 0.3%, a pH value of 6-9, and a particle size range of 10-60 µm. It offers good heat and light resistance and provides a bright wine red luster. This product can be used in coating and ink applications. view less |
