| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...view more CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. view less | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...view more R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...view more R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. view less | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...view more R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. view less | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...view more R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. view less | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...view more R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...view more R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must main...view more R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maint...view more R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...view more R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...view more R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| Diffusing Wave Spectroscopy | Formulaction Inc. | Multi Speckle-Diffusing Wave Spectroscopy (MS-DWS) is the key light scattering method which measures the mobility of particles in a media. | |
| Rheolaser™ Coating | Formulaction Inc. | The Rheolaser™ Coating is a non-invasive, optical technique used to analyze the drying profiles of thing films. The device uses Diffusing Wave Spectroscopy to detect the Browniam motion of the particles inside of a thin film sample as it dries in order to...view more The Rheolaser™ Coating is a non-invasive, optical technique used to analyze the drying profiles of thing films. The device uses Diffusing Wave Spectroscopy to detect the Browniam motion of the particles inside of a thin film sample as it dries in order to give profile evolution and characteristic drying times. view less |  |
| Rheolaser™ Crystal | Formulaction Inc. | A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, cry...view more A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, crystallization and polymorphic transitions in bulk samples with the click of a button. This thermal analysis technique excels when measuring samples with delicate microstructures or in cases where typical thermal analysis techniques fail. view less |  |
| Rheolaser™ Master | Formulaction Inc. | The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as ...view more The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as accurate gel point determination. view less |  |
| Turbiscan™ AGS | Formulaction Inc. | The Turbiscan™ AGS integrates the Turbiscan™ LAB stability analyzer to an autosampling robot capable of analyzing up to 54 samples with three different temperature chambers operating from RT to 60 degrees C. |  |
| Turbiscan™ Classic MA 2000 | Formulaction Inc. | Turbiscan™ Classic MA 2000 is the device to optimise the pre-formulation work by giving an insight into the instability phenomena. |  |
| Turbiscan™ LAB | Formulaction Inc. | The Turbiscan™ LAB can quantify and predict the stability of concentrated systems such as emulsions, dispersions and foams. A non-invasive Multiple Light Scattering (MLS) technique is employed to determine the intensity of particle migration kinetics (sed...view more The Turbiscan™ LAB can quantify and predict the stability of concentrated systems such as emulsions, dispersions and foams. A non-invasive Multiple Light Scattering (MLS) technique is employed to determine the intensity of particle migration kinetics (sedimentation, creaming, clarification) and particle size change kinetics (flocculation, coalescence, packing) as well as phase thickness growth. Analysis can be performed from RT to 60 degrees C on samples up to 95% concentration. view less |  |
| Turbiscan™ Online Process | Formulaction Inc. | Turbiscan™ Online and Turbiscan™ Online+ to monitor on-line and in real time the physical properties of liquid dispersions: diameter and concentration. |  |
