| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...view more 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. view less | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...view more Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. view less | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| ATLAS™ 100 | Cabot Corporation - Additives | ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface...view more ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface. This product is well suited for use in electrophotographic toner applications. view less | |
| BLACK PEARLS® 120 | Cabot Corporation - Additives | BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coat...view more BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coatings. view less | |
| BLACK PEARLS® 160 | Cabot Corporation - Additives | BLACK PEARLS® 160 is a regular color opacifying and tinting carbon black offering good dispersability for plastic film and molding applications. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
| BLACK PEARLS® 280 | Cabot Corporation - Additives | BLACK PEARLS® 280 is a general purpose, easy-to-disperse carbon black with good ultraviolet and weatherability characteristics. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...view more CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. view less | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...view more CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. view less | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...view more CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. view less | |
| CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...view more CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. view less | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...view more Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. view less | |
| Cosmic Black 2172 | Ebonex Corp. | Cosmic Black 2172 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into va...view more Cosmic Black 2172 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black 300 | Ebonex Corp. | Cosmic Black 300 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...view more Cosmic Black 300 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black 500 WB | Ebonex Corp. | Cosmic Black 500 WB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into ...view more Cosmic Black 500 WB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black 6 | Ebonex Corp. | Cosmic Black 6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vario...view more Cosmic Black 6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black 7 | Ebonex Corp. | Cosmic Black 7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vario...view more Cosmic Black 7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black AP | Ebonex Corp. | Cosmic Black AP is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vari...view more Cosmic Black AP is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black CEM | Ebonex Corp. | Cosmic Black CEM is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...view more Cosmic Black CEM is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black D-2 | Ebonex Corp. | Cosmic Black D-2 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...view more Cosmic Black D-2 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black D-Special | Ebonex Corp. | Cosmic Black D-Special is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it in...view more Cosmic Black D-Special is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black DB | Ebonex Corp. | Cosmic Black DB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vari...view more Cosmic Black DB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black FCG-1 | Ebonex Corp. | Cosmic Black FCG-1 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into v...view more Cosmic Black FCG-1 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black H-4 | Ebonex Corp. | Cosmic Black H-4 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...view more Cosmic Black H-4 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black H-6 | Ebonex Corp. | Cosmic Black H-6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...view more Cosmic Black H-6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Cosmic Black H-7 | Ebonex Corp. | Cosmic Black H-7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...view more Cosmic Black H-7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...view more Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. view less | |
| Dicyclohexylamine | Henan Harvest Chem Co., LTD. | Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insectic...view more Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insecticides, catalysts etc. view less | |
| Ebonex 1047 | Ebonex Corp. | Ebonex 1047 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various ...view more Ebonex 1047 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Ebonex 3D | Ebonex Corp. | Ebonex 3D is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various si...view more Ebonex 3D is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| Ebonex SC-5 | Ebonex Corp. | Ebonex SC-5 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various ...view more Ebonex SC-5 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. view less | |
| ELFTEX® 320 | Cabot Corporation - Additives | ELFTEX® 320 is a low structure specialty carbon black pigment that is formulated to impart high gloss, blue undertone and moderate color strength for use in lithographic gloss inks. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....view more Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". view less | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...view more Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. view less | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...view more Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. view less | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...view more Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...view more Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. view less | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...view more Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
| MOGUL® L | Cabot Corporation - Additives | MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equip...view more MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equipment used and the formulation. With its oxidized surface, it disperses more easily than other Cabot carbon blacks used in higher jetness applications. view less | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| N,N-dimethylformamide | Henan Harvest Chem Co., LTD. | N,N-dimethylformamide is a clear without suspension, inflammable liquid. This product is an organic solvent that is used in dye and paint applications. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...view more Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. view less | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...view more Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. view less | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...view more PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. view less | |
| R-1201 | ANHUI DONGHUI INTERNATIONAL | R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an...view more R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤17g/100g, and a pH of 6.5 to 8.0. view less | |
| R-1202 | ANHUI DONGHUI INTERNATIONAL | R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/c...view more R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤19g/100g, and a pH of 6.5 to 8.0. view less | |
| R-215 | ANHUI DONGHUI INTERNATIONAL | R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a spec...view more R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a specific gravity of 3.9 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 8.5. view less | |
| R-216 | ANHUI DONGHUI INTERNATIONAL | R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of...view more R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. view less | |
| R-219 | ANHUI DONGHUI INTERNATIONAL | R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific ...view more R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 9.0. view less | |
| REGAL® 250R | Cabot Corporation - Additives | REGAL® 250R is a blue tone, low vehicle carbon black that is formulated for good color strength, high load base, and high gloss. This product is well suited for use in printing ink applications. | |
| REGAL® 330 | Cabot Corporation - Additives | REGAL® 330 is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 330R | Cabot Corporation - Additives | REGAL® 330R is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 350R | Cabot Corporation - Additives | REGAL® 350R is a low structure specialty black pigment that is formulated to impart a blue tone, and maintain good gloss and moderate color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 400 | Cabot Corporation - Additives | REGAL® 400 is a low structure pigment black that is formulated to impart high gloss and good color strength in printing inks and other applications. | |
| REGAL® 400R | Cabot Corporation - Additives | REGAL® 400R is a regular color black pigment that has a high oxidized surface and imparts good dispersibility, high gloss and color strength. This product is well suited for use in printing inks, toners, plastics, coatings. | |
| REGAL® 660 | Cabot Corporation - Additives | REGAL® 660 is a low structure specialty black pigment that is formulated to impart high gloss and high jetness. This product is well suited for use in printing inks, coatings and general dispersions. | |
| REGAL® 660R | Cabot Corporation - Additives | REGAL® 660R is a low structure, high tinting strength regular color printing black. It is formulated for liquid and powder systems. This product is well suited for coloring leather articles, dispersions, coatings, and inks. | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...view more SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. view less | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...view more SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. view less | |
| Sec-butyl Acetate | Henan Harvest Chem Co., LTD. | Sec-butyl Acetate is a colorless, flammable liquid. This product has a molecular weight of 116.16 and has a density of 0.866-0.878 g/cm³. Sec-butyl Acetate is used as a solvent in coating and printing ink applications. | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...view more Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. view less | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...view more Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...view more Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...view more Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. view less | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...view more SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. view less | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...view more SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. view less | |
| Tert-butyl Acetate | Henan Harvest Chem Co., LTD. | Tert-butyl Acetate is a colorless, transparent liquid. This product has a molecular weight of 116.6 g/cm³. Tert-butyl Acetate is used as a solvent and in coating material, paint, printing ink and sealing material applications. | |
| Tetrahydrofurfuryl Alcohol (THFA) | Henan Harvest Chem Co., LTD. | Tetrahydrofurfuryl Alcohol (THFA) is a colorless, low toxicity, liquid. This product provides moisture absorbing properties. Tetrahydrofurfuryl Alcohol (THFA) can also be used for making aminoplastics and a fine solution to resin,coating material and gre...view more Tetrahydrofurfuryl Alcohol (THFA) is a colorless, low toxicity, liquid. This product provides moisture absorbing properties. Tetrahydrofurfuryl Alcohol (THFA) can also be used for making aminoplastics and a fine solution to resin,coating material and grease. In printing and dyeing, it can be used as a lubricant and dispersing agent. view less | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...view more UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. view less | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...view more UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. view less | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...view more UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. view less | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...view more UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. view less | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...view more UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. view less | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. |
