| CYMEL® U-1054 | Allnex | CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance propertie...view more CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, this product provides an excellent balance between adhesion and film flexibility, especially after several cure cycles. view less | Request Sample |
| CYMEL® U-216-10LF | Allnex | CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was design...view more CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems. view less | Request Sample |
| CYMEL® U-216-8 | Allnex | CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion ...view more CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion characteristics. This product is recommended as a crosslinking resin in primer coatings, can coatings, and metal deco finishes. view less | Request Sample |
| CYMEL® U-227-8 | Allnex | CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal prim...view more CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels. view less | Request Sample |
| CYMEL® U-65 | Allnex | CYMEL® U-65 resin is a high solids, methylated urea resin designed for use in both water and solvent-borne systems as a crosslinking agent for a variety of polymers that contain hydroxyl functionality. | Request Sample |
| CYMEL® U-662 | Allnex | CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for ac...view more CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission is required. view less | Request Sample |
| CYMEL® U-663 | Allnex | CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity...view more CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission and high film gloss is required. view less | Request Sample |
| CYMEL® U-80 | Allnex | CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating...view more CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion and to various substrates. view less | Request Sample |
| CYMEL® UB-30-B | Allnex | CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes it suitable for a wide range of industrial baking applications. Because of the limited UV re...view more CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes it suitable for a wide range of industrial baking applications. Because of the limited UV resistance properties of urea resins, this product is not suitable for exterior applications. view less | Request Sample |
| CYMEL® UI-19-I | Allnex | CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes this product suitable for ambient and low bake industrial wood finishes. | Request Sample |
| CYMEL® UI-19-IE | Allnex | CYMEL UI-19-IE resin is a partially iso-butylated urea crosslinker supplied in isobutanol and ethanol. The very fast drying properties combined with very good stackability properties makes CYMEL UI-19-IE resin suitable for fast drying acid curing wood coa...view more CYMEL UI-19-IE resin is a partially iso-butylated urea crosslinker supplied in isobutanol and ethanol. The very fast drying properties combined with very good stackability properties makes CYMEL UI-19-IE resin suitable for fast drying acid curing wood coating applications where low odor formulations are required. view less | Request Sample |
| CYMEL® UI-21-E Resin | Allnex | CYMEL® UI-21-E resin is a partially iso-butylated urea resin supplied in ethanol. It has been designed for a wide range of high build, low odor industrial wood finishes. CYMEL® UI-21-E resin is not suitable for exterior applications. | Request Sample |
| CYMEL® UI-27-EI | Allnex | CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is no...view more CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is not suitable for exterior applications. view less | Request Sample |
| CYMEL® UI-38-I Resin | Allnex | CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea res...view more CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications. view less | Request Sample |
| CYMEL® XW 3106 | Allnex | CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate hi...view more CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate high performance coatings for heat sensitive substrates. These systems have excellent early hardness, resistance properties, appearance and hot/cold cycle flexibility. view less | Request Sample |
| CYREZ® 400 | Allnex | CYREZ® 400 is a HMMM-based resin using precipitated silica as a carrier. This resin is 72% active ingredient HMMM and functions as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinfo...view more CYREZ® 400 is a HMMM-based resin using precipitated silica as a carrier. This resin is 72% active ingredient HMMM and functions as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. view less | Request Sample |
| CYREZ® 963 Product Family (100% HMMM) | Allnex | CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ...view more CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ 963 products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. view less | Request Sample |
| CYREZ® 966 RESIN | Allnex | CYREZ® 966 resin is a highly methylated melamine crosslinking agent and is the purest form of hexamethoxymethylmelamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYREZ® 966 resin an excellent ...view more CYREZ® 966 resin is a highly methylated melamine crosslinking agent and is the purest form of hexamethoxymethylmelamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYREZ® 966 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings. view less | Request Sample |
| CYREZ® CRA 200-300 Product Family (72% HMMM) | Allnex | CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to ...view more CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. These products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. view less | Request Sample |
| DAOTAN® STW 6434/40WA | Allnex | DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for...view more DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for waterborne OEM primer-surfacers to improve stone chipping resistance. view less | Request Sample |
| DAOTAN® TW 1225/40WANEP | Allnex | Daotan® TW 1225/40WANEP is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has shear stability and pigment compatibility, giving highly flexible films. | Request Sample |
| DAOTAN® TW 1252/42WA | Allnex | DAOTAN® TW 1252/42WA is a polyurethane dispersion modified with drying fatty acids, 42% solids in water (42WA), (containing also 3 % n-ethyl-2-pyrrolidone). | Request Sample |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly ...view more Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. view less | Request Sample |
| DAOTAN® TW 6431/45WA | Allnex | Daotan® TW 6431/45WA is a physically drying, solvent and surfactant free, aqueous aliphatic polyurethane-urea-dispersion based on polybutadiene. Fast drying and provides clear, crack free and highly flexible films. Main application of Daotan® TW 6431/45WA...view more Daotan® TW 6431/45WA is a physically drying, solvent and surfactant free, aqueous aliphatic polyurethane-urea-dispersion based on polybutadiene. Fast drying and provides clear, crack free and highly flexible films. Main application of Daotan® TW 6431/45WA is coating and sealing of a wide variety of substrates, when flexibility and chemical resistance or even stripability of the coating is necessary. view less | Request Sample |
| DAOTAN® TW 6439/30WA | Allnex | Daotan® TW 6439/30WA is recommended as the NMP/NEP- free alternative for Daotan (V)TW 1237. Alike latter Daotan TW 6439 is a polyester-based, high molecular weight polyurethane dispersion. Dried at ambient temperature, this product provides clear, crack-f...view more Daotan® TW 6439/30WA is recommended as the NMP/NEP- free alternative for Daotan (V)TW 1237. Alike latter Daotan TW 6439 is a polyester-based, high molecular weight polyurethane dispersion. Dried at ambient temperature, this product provides clear, crack-free films without further addition of organic solvents. These films also exhibit excellent elasticity and mechanical properties. view less | Request Sample |
| DAOTAN® TW 6442/42WA | Allnex | DAOTAN® TW 6442/42WA is a Polyurethane dispersion modified with drying fatty acids. | Request Sample |
| DAOTAN® TW 6450/30WA | Allnex | DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further a...view more DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates view less | Request Sample |
| DAOTAN® TW 6452/30WA | Allnex | DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water r...view more DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water resistance as well as mechanical properties. view less | Request Sample |
| DAOTAN® TW 6464/36WA | Allnex | Daotan® TW 6464/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance. | Request Sample |
| DAOTAN® TW 6466/36WA | Allnex | DAOTAN® TW 6466/36WA is an aqueous emulsion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It is a polyester- based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of so...view more DAOTAN® TW 6466/36WA is an aqueous emulsion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It is a polyester- based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature DAOTAN® TW 6466 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 6473/37WA | Allnex | Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provide...view more Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provides good shear stability and pigment compatibility. view less | Request Sample |
| DAOTAN® TW 6474/37WA | Allnex | Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time ...view more Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time and early hardness development. It can also be used for improving the flexibility of acrylic dispersion coatings. view less | Request Sample |
| DAOTAN® TW 6490/35WA | Allnex | Daotan® TW 6490/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. It is recommended for waterborne plastic Primers and Basecoats. | Request Sample |
| DAOTAN® TW 6491/33WA | Allnex | Daotan® TW 6491/33WA is a waterborne, high molecular weight, polyether- based Polyurethane dispersion, free of solvents and emulsifiers. Coatings based on Daotan TW 6491 provide quick drying and yield transparent, crack free films without further addition...view more Daotan® TW 6491/33WA is a waterborne, high molecular weight, polyether- based Polyurethane dispersion, free of solvents and emulsifiers. Coatings based on Daotan TW 6491 provide quick drying and yield transparent, crack free films without further addition of co- solvents. Outstanding features are very high elasticity and elongation. view less | Request Sample |
| DAOTAN® TW 6493/35WA | Allnex | DAOTAN® TW 6493/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films, where as for drying at ambient temperature additional solvents are needed. | Request Sample |
| DAOTAN® TW 6495/35WA | Allnex | DAOTAN® TW 6495/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films. It is recommended for waterborne plastic primers and basecoats. | Request Sample |
| DAOTAN® TW 7000/40WA | Allnex | Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles,...view more Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). view less | Request Sample |
| DAOTAN® TW 7010/36WA | Allnex | DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for f...view more DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). Highest water and chemical resistance, high Tg, view less | Request Sample |
| DAOTAN® TW 7050/34WA | Allnex | DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous ad...view more DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 7061/35WA | Allnex | DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free ...view more DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 7063/36WA | Allnex | DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free ...view more DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free films without any previous additions of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 7064/36WA | Allnex | DAOTAN® TW 7064/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance. | Request Sample |
| DAOTAN® TW 7065/36WA | Allnex | DAOTAN® TW 7065/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical and abrasion resistance. | Request Sample |
| DAOTAN® TW 7066/36WA | Allnex | DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free...view more DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® VTW 1225/40WA | Allnex | Daotan® VTW 1225/40WA is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has highly flexible coating systems especially for primers and decorative top coats for plastics. | Request Sample |
| DAOTAN® VTW 1250/40WA | Allnex | Daotan® VTW 1250/40WA is an aromatic polyurethane-dispersion modified with drying fatty acids. It's used as a sole binder for corrosion protection systems. | Request Sample |
| DAOTAN® VTW 1262/35WA | Allnex | Daotan® VTW 1262/35WA is a polyurethane emulsion that needs no further film formers to give clear flexible films when dried at room temperature. | Request Sample |
| DAOTAN® VTW 1265/36WA | Allnex | Daotan® VTW 1265/36WA is an aqueous, solvent-free, self crosslinking polyurethane dispersion. It can be preferably used for plastic coatings. | Request Sample |
| DAOTAN® VTW 1686/40WA | Allnex | Daotan® VTW 1686/40WA is a polyester-modified acrylic dispersion containing epoxy groups used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e.g. base coats. | Request Sample |
| DAOTAN® VTW 2229/40WANMP | Allnex | Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers...view more Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers. view less | Request Sample |
| DAOTAN® VTW 6421/42WA | Allnex | Daotan® VTW 6421/42WA is a waterborn, clear solution of polyurethane resin, and has excellent adhesion and flexibility properties. It can be used as additional binder in 1pack and 2pack coating formulations and adhesives. | Request Sample |
| DAOTAN® VTW 6460/35WA | Allnex | Daotan® VTW 6460/35WA is an aqueous polyurethane dispersion, solvent-free. It is suitable for the formulation of aqueous, ambient temperature or force dried industrial coatings - especially aqueous basecoats for the automotive industry. | Request Sample |
| DAOTAN® VTW 6462/36WA | Allnex | Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, fl...view more Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, flexible PVC and PMMA. Aqueous primers and base coats can be formulated. view less | Request Sample |
| DAOTAN® VTW 6463/36WA | Allnex | Daotan® VTW 6463/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It has very good wetting properties, and quick curing to give clear crack-free films. | Request Sample |
| Dimethyl Acrylamide (DMAA) | Kowa American Corporation | Dimethyl Acrylamide (DMAA) is a clear, colorless liquid with slight odor. This product is completely soluble in water. | Request Sample |
| Dimethylamino Propyl Methacrylamide (DMAPMA) | Kowa American Corporation | Dimethylamino Propyl Methacrylamide (DMAPMA) is a light, yellow clear liquid. It is used in flocculants and water soluble polymers. | Request Sample |
| Dimethylaminoethyl Methacrylate (DMMA) | Kowa American Corporation | Dimethylaminoethyl Methacrylate (DMMA) is a Mitsubishi Rayon methacrylate functional monomer. | Request Sample |
| DPGDA | Allnex | DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with g...view more DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance. view less | Request Sample |
| DPHA | Allnex | DPHA (Acrylated dipentaerythritol) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure ...view more DPHA (Acrylated dipentaerythritol) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure response, hardness and scratch/abrasion resistance are desired. DPHA is composed predominately of the penta- and hexa-acrylate esters of dipentaerythritol, with the overall composition represented by the included chemical structure. view less | Request Sample |
| DPMP | Kowa American Corporation | DPMP is a polythiols in coating form for use in epoxy curing agents. Polythiols, when added in a curing agent, will contribute well to its adhesiveness. | Request Sample |
| DURANOL™ G3450J | Kowa American Corporation | DURANOL™ G3450J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts good abrasion resistance, lower crystallinity, and lower viscosity. This product is recommended for UV-cure coatings and adhesive applications. | Request Sample |
| DURANOL™ G3452 | Kowa American Corporation | DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyuret...view more DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. view less | Request Sample |
| DURANOL™ G4672 | Kowa American Corporation | DURANOL™ G4672 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4671 | Kowa American Corporation | DURANOL™ T4671 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4691 | Kowa American Corporation | DURANOL™ T4691 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4692 | Kowa American Corporation | DURANOL™ T4692 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
| DURANOL™ T5650E | Kowa American Corporation | DURANOL™ T5650E is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and adhesives. | Request Sample |
| DURANOL™ T5650J | Kowa American Corporation | DURANOL™ T5650J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and for adhesives agents. | Request Sample |
| Duranol™ T5651 Soft Polycarbonatediol (PCD) | Kowa American Corporation | Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a...view more Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a softer feel as a binder in soft feel coatings. Duranol™ T5651 is easy to handle and exhibits good solvent solubility. It is amorphous and possesses stress at a low strain smaller than that of solid type PCD. Duranol™ T5651 is designed for various coating and other similar applications. view less | Request Sample |
| DURANOL™ T5652 | Kowa American Corporation | DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyureth...view more DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. view less | Request Sample |
| DURANOL™ T6001 | Kowa American Corporation | DURANOL™ T6001 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane elastomers and dispersions. | Request Sample |
| DURANOL™ T6002 | Kowa American Corporation | DURANOL™ T6002 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane resins for artificial leather and polyurethane dispersions. | Request Sample |
| DUROFTAL® AQ-803 | Allnex | DUROFTAL® AQ 803 is a polyester resin free oil diluted in R-9 solvent. It offers high brightness and excellent flexibility, provides optimal grip, initial color retention, and high hardness and chemical resistance. This product is recommended for automoti...view more DUROFTAL® AQ 803 is a polyester resin free oil diluted in R-9 solvent. It offers high brightness and excellent flexibility, provides optimal grip, initial color retention, and high hardness and chemical resistance. This product is recommended for automotive coatings, varnishes, top coats, coil coatings, and for many other applications. view less | Request Sample |
| DUROFTAL® PE 6607/60BGMP | Allnex | DUROFTAL® PE 6607/60BGMP is an oil-free polyester resin. It has been especially developed as a replacement of epoxy resins for interior and exterior coatings for metal packaging goods (can coating). When combined with phenolic resins or amino resins, thes...view more DUROFTAL® PE 6607/60BGMP is an oil-free polyester resin. It has been especially developed as a replacement of epoxy resins for interior and exterior coatings for metal packaging goods (can coating). When combined with phenolic resins or amino resins, these lacquers neither contain BADGE, nor Bisphenol A. view less | Request Sample |
| DUROFTAL® PE 912/60SNA | Allnex | Duroftal® PE 912/60SNA is an oil-free polyester for the use in solvent-born base- and topcoats. | Request Sample |
| DUROFTAL® PI 2801/78BAC | Allnex | DUROFTAL® PI 2801/78BAC is a hydroxy-functional polyester. In combination with aliphatic polyisocyanates, it produces high quality, ultra high solids, two pack clear and pigmented topcoats for the automotive repair and industrial lacquer sectors. This pro...view more DUROFTAL® PI 2801/78BAC is a hydroxy-functional polyester. In combination with aliphatic polyisocyanates, it produces high quality, ultra high solids, two pack clear and pigmented topcoats for the automotive repair and industrial lacquer sectors. This product provides high hardness, excellent solvent- and chemical resistance, and superior weathering stability. view less | Request Sample |
| DUROFTAL® VPE 6104/60MPAC | Allnex | Duroftal® VPE 6104/60MPAC is an oil-free, saturated polyester. It offers very good levelling at roller application, good deformability, and color stability. This product is especially suited for the production of cold-resistant tube coatings and steriliza...view more Duroftal® VPE 6104/60MPAC is an oil-free, saturated polyester. It offers very good levelling at roller application, good deformability, and color stability. This product is especially suited for the production of cold-resistant tube coatings and sterilizable, cupping exterior can coatings and aerosol tin paints as well as sealers. view less | Request Sample |
| DUROFTAL® VPE 6117 | Allnex | Duroftal® VPE 6117 is an aliphatic polyester resin and contributes to increased solids content of the paint and to improved build, gloss and flexibility of the paint film. | Request Sample |
| DUROFTAL® VPI 2803/78BAC | Allnex | Duroftal® VPI 2803/78BAC is a hydroxy functional polyester and is cross-linkable with polyisocyanates for the production of ultra high solids lacquers. In combination with aliphatic polyisocyanates, pre-eminently with Desmodur N 3300 (Bayer), produces hig...view more Duroftal® VPI 2803/78BAC is a hydroxy functional polyester and is cross-linkable with polyisocyanates for the production of ultra high solids lacquers. In combination with aliphatic polyisocyanates, pre-eminently with Desmodur N 3300 (Bayer), produces high quality, ultra high solids, two pack clearcoats and pigmented topcoats for the automotive refinish and industrial lacquer sectors. view less | Request Sample |
| DUROXYN® EF 2107W/43WA | Allnex | DUROXYN® EF 2107W/43WA is an aqueous, cationic epoxy-resin ester developed for the production of 1-component primers, with fast dry, high film hardness, and excellent stain blocking properties. | Request Sample |
| DUROXYN® EF 2107w/45WA | Allnex | DUROXYN® EF 2107W/45WA is an aqueous, cationic epoxy-resin ester developed for the production of 1-comp.-primers, with quick drying and high film hardness. | Request Sample |
| DUROXYN® EF 900/60X | Allnex | Duroxyn® EF 900/60X is an air-drying and stoving epoxy resin ester that is used in anticorrosive paint systems and primers, and zinc dust paints. | Request Sample |
| DUROXYN® EF 935/60X | Allnex | Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying ...view more Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying and stoving anticorrosive primers. view less | Request Sample |
| DUROXYN® SEF 968w | Allnex | Duroxyn® SEF 968w is a non-drying epoxy-resin-ester. It is used as binder for glass fibre sizing. It is processed as approx. 33 % emulsion in water. For production of the emulsion Duroxyn SEF 968w is heated up at a temperature of approx. 50 °C. | Request Sample |
| DUROXYN® SEF 968w/25WA | Allnex | DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterbo...view more DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterborne sizing components. Final compatibility and sizing bath stability needs to be evaluated. view less | Request Sample |
| DUROXYN® SEF 968w/50WA | Allnex | DUROXYN® SEF 968w/50WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterbo...view more DUROXYN® SEF 968w/50WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterborne sizing components. Final compatibility and sizing bath stability needs to be evaluated. view less | Request Sample |
| DUROXYN® VAX 6127w/42WA | Allnex | Duroxyn® VAX 6127W/42WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It has excellent corrosion resistance, high water stability, and good recoat-ability. It's a sole binder for air and forced drying anticorrosive primers and indus...view more Duroxyn® VAX 6127W/42WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It has excellent corrosion resistance, high water stability, and good recoat-ability. It's a sole binder for air and forced drying anticorrosive primers and industrial coatings. view less | Request Sample |
| DUROXYN® VEF 2406w/45WA | Allnex | Duroxyn® VEF 2406W/45WA is an aqueous, cationic epoxy-resin-ester developed for the production of 1-comp. -primers, with quick drying and high film hardness. | Request Sample |
| DUROXYN® VEF 4380w/35WA | Allnex | Duroxyn® VEF 4380W/35WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It's a sole binder for air and forced drying anticorrosive primers and industrial coatings. | Request Sample |
| EBECRYL® 109 | Allnex | EBECRYL® 109 is an acrylate - methacrylate monomer blend, containing 50% of trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethylmethacrylate (HEMA). It polymerizes when exposed to sources of free radicals. EBECRYL® 109 is particularly useful in coa...view more EBECRYL® 109 is an acrylate - methacrylate monomer blend, containing 50% of trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethylmethacrylate (HEMA). It polymerizes when exposed to sources of free radicals. EBECRYL® 109 is particularly useful in coatings where a good thermal and/or chemical resistance are important. It is recommended for use in: coatings where chemical and/or thermal resistance is required, and solder and etch resists. view less | Request Sample |
| EBECRYL® 11 | Allnex | EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility. | Request Sample |
| EBECRYL® 110 | Allnex | EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for E...view more EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for EBECRYL® 110 include: coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings. view less | Request Sample |
| EBECRYL® 113 | Allnex | EBECRYL® 113 is a low odour aliphatic monofunctional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion to plastics. | Request Sample |
| EBECRYL® 114 | Allnex | EBECRYL® 114 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings and inks to control viscosity and increase adhesion and flexibility. It is ...view more EBECRYL® 114 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings and inks to control viscosity and increase adhesion and flexibility. It is recommended as a reactive diluent for: Coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings. view less | Request Sample |
| EBECRYL® 117 | Allnex | EBECRYL® 117 is a low odor aliphatic mono-functional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion. | Request Sample |
| EBECRYL® 118 | Allnex | EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and...view more EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improve substrate adhesion. view less | Request Sample |
| EBECRYL® 1200 | Allnex | EBECRYL® 1200 is used in UV curable coatings and is supplied as 55% in butyl acetate. It will be crosslinked to paint films with excellent hardness, flexibility and resistance to chemicals. | Request Sample |
| EBECRYL® 1205 | Allnex | EBECRYL® 1205 is an acrylic acrylate resin containing hydroxyl functionality and is supplied in ~48% by weight of butyl acetate. It is designed for use in dual cure systems combining ultraviolet (UV) or electron beam (EB) radical cure along with isocyanat...view more EBECRYL® 1205 is an acrylic acrylate resin containing hydroxyl functionality and is supplied in ~48% by weight of butyl acetate. It is designed for use in dual cure systems combining ultraviolet (UV) or electron beam (EB) radical cure along with isocyanate/hydroxyl reaction. EBECRYL® 1205 is also useful as adhesion promoter in coatings standard UV/EB energy cured systems. view less | Request Sample |
| EBECRYL® 1258 | Allnex | EBECRYL® 1258 is a trifunctional aliphatic urethane acrylate diluted 20% by weight with hydroxypropylmethacrylate (HPMA) that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone ...view more EBECRYL® 1258 is a trifunctional aliphatic urethane acrylate diluted 20% by weight with hydroxypropylmethacrylate (HPMA) that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 1258 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with resistance to yellowing. view less | Request Sample |
| EBECRYL® 1271 | Allnex | EBECRYL® 1271 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...view more EBECRYL® 1271 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 1271.) Films of EBECRYL® 1271 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, adhesion, abrasion resistance, exterior durability, and are resistant to yellowing. view less | Request Sample |
