| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...view more Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...view more Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. view less | |
| Dynoadd® F-409 | Dynoadd by Dynea | Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive si...view more Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive significantly reduces orange peel and improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-409 has applications in general industry and wood coatings. The additive is compatible with most solvent-borne and solvent-free radiation curing systems independent of oligomer chemistry. view less | |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...view more Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. view less | |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...view more Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. view less | |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | |
| Dynoadd® F-470 | Dynoadd by Dynea | Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated ...view more Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-470 does not reduce transparency and is recommended for clear coats. Dynoadd® F-470 contains a lower level of fluoro polymer. view less | |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...view more Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...view more Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. view less | |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in ...view more Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. This product has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-701B can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. view less | |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...view more Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...view more Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...view more Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F...view more Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F-711 is effective in polyester or alkyd-melamine, 2K-PU and 2K-Acrylic formulations. It has applications in automotive refinish coatings, coil coatings, and industrial coatings. view less | |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...view more Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. view less | |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...view more Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. view less | |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less | |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...view more Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. view less | |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...view more Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. view less | |
| Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-530 has a particle size of 30 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-540 has a particle size of 40 microns.The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...view more Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. view less | |
| Ethylene Glycol Dimethacrylate (EDMA) | Kowa American Corporation | Ethylene Glycol Dimethacrylate (EDMA) is a clear water white liquid. It is 0.18% soluble in water and 0.70% in water in EDMA. | Request Sample |
| Glycidyl Methacrylate (GMA) | Kowa American Corporation | Glycidyl Methacrylate (GMA) is a clear water white liquid. It has a 2.53 cps viscosity at 28°C. | Request Sample |
| Hydroxypropyl Acrylate (HPA) | Kowa American Corporation | Hydroxypropyl Acrylate (HPA) is a clear, water white liquid. | Request Sample |
| IDH | Kowa American Corporation | IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| Isobornyl Acrylate (IBXA) | Kowa American Corporation | Isobornyl Acrylate (IBXA) is a clear water white liquid. It has a 7.6 cps viscosity at 28°C. | Request Sample |
| Isobornyl Methacrylate (IBXMA) | Kowa American Corporation | Isobornyl Methacrylate (IBXMA) is a clear water white liquid. It is insoluble in water. | Request Sample |
| Isobutyl Acrylate (IBA) | Kowa American Corporation | Iso-Butyl Acrylate (IBA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing IBA have improved hardness, chemical resistance, water resistance, hydrophobicity, an...view more Iso-Butyl Acrylate (IBA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing IBA have improved hardness, chemical resistance, water resistance, hydrophobicity, and weatherability. view less | Request Sample |
| LOW ODOR PEMP Pentaerythritol Tetrakis (3-mercaptopropionate) | Kowa American Corporation | LOW ODOR PEMP is a tetra functional polythiol. The reducing properties of its SH-group can be useful as a chain transfer agent, cross-linking agent, epoxy curing agent, & for improved adhesion & flexibility in coatings, adhesives and sealants. | Request Sample |
| Methacrylamido Propyl Trimethyl Ammonium Chloride (MAPTAC) | Kowa American Corporation | Methacrylamido Propyl Trimethyl Ammonium Chloride (MAPTAC) is a liquid. | Request Sample |
| Methacryloyl Chloride | Kowa American Corporation | Methacryloyl Chloride is a clear liquid. | Request Sample |
| N-12 | Kowa American Corporation | N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agen...view more N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| ORGASOL® 1002 D NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 6, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 2001 EXD NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 2001 UD NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 2002 D NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 3501 EXD NAT 1 | Arkema Orgasol | Ultrafine powder of copolyamide 6/12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 3502 D NAT 1 | Arkema Orgasol | Ultrafine powder of coplyamide 6/12, with a narrow particle size distribution and nearly round particle shape. | |
| PEMP | Kowa American Corporation | PEMP is a polythiols in coating form for use in epoxy curing agents. Polythiols, when added in a curing agent, will contribute well to its adhesiveness. | Request Sample |
| Phenoxyethyl Acrylate (PEA, V-192) | Kowa American Corporation | Phenoxyethyl Acrylate (PEA, V-192) is a clear water white liquid. When shipped in 200Kg (441lb) net wt. steel drums. | Request Sample |
| RENEWABLE ORIGIN Sebacic Acid Polyester Polyol PPS-10100 | Kowa American Corporation | RENEWABLE ORIGIN PPS-10100 is a sebacic acid polyester polyol primarily used in polyurethanes for stability, heat, solvent & chemical resistance, low temp characteristics and application color stability in coatings, adhesives & sealants, & inks. | Request Sample |
| SDH | Kowa American Corporation | SDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more SDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| Sodium Methallyl Sulfonate (SMAS) | Kowa American Corporation | Sodium Methallyl Sulfonate (SMAS) is a white flake-like powder. | Request Sample |
| Stearyl Acrylate (STA) | Kowa American Corporation | Stearyl Acrylate (STA) is a clear liquid above 30°C and a white waxy solid below 28°C. When shipped, it is packed in 153Kg (337lb) net wt. steel drums. | Request Sample |
| SUDH | Kowa American Corporation | SUDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agen...view more SUDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less | Request Sample |
| tert-Butyl Acrylamide (tBAA) | Kowa American Corporation | tert-Butyl Acrylamide (tBAA) is a white crystal powder that gives hydrophobicity to the polymer which was provided by co-polymerization with other monomers because there is this tert-butyl group. The hydrophobic effect by tert-butyl group in the molecules...view more tert-Butyl Acrylamide (tBAA) is a white crystal powder that gives hydrophobicity to the polymer which was provided by co-polymerization with other monomers because there is this tert-butyl group. The hydrophobic effect by tert-butyl group in the molecules can keep the prevention of deterioration such as swelling of a polymer by influence of the humidity. It is able to improve in coherency of a polymer and can regulate balance of hydrophobicity and hydrofilicity. It is able to constitute the water-soluble polymer which had moderate hydrophobicity view less | Request Sample |
| tert-Butyl Methacrylate (TBMA) | Kowa American Corporation | tert-Butyl Methacrylate (TBMA) is a mono-functional monomer with a characteristic high reactivity of methacrylates and a bulky hydrophobic moiety. TBMA is used to impart chemical, scratch & heat resistance, hydrophobicity, hardness, adhesion, high solids,...view more tert-Butyl Methacrylate (TBMA) is a mono-functional monomer with a characteristic high reactivity of methacrylates and a bulky hydrophobic moiety. TBMA is used to impart chemical, scratch & heat resistance, hydrophobicity, hardness, adhesion, high solids, and weatherability in a variety of industrial applications. view less | Request Sample |
| Tetrahydrofurfuryl Acrylate (THFA, V-150) | Kowa American Corporation | Tetrahydrofurfuryl Acrylate (THFA, V-150) is a clear water white liquid. When shipped, it is packed 200Kg (441lb) net wt. steel drums. | Request Sample |
| Tetrahydrofurfuryl Methacrylate (THFMA) | Kowa American Corporation | Tetrahydrofurfuryl Methacrylate (THFMA) is a clear water white to light yellow liquid. It has a 2.84 cps viscosity at 20°C. | Request Sample |
| Thiodipropionic Acid (TDPA) | Kowa American Corporation | Thiodipropionic Acid (TDPA) is a high purity, free flowing white powder without caking tendency. The water solution of the product is colorless and the transparency is very high. This product is used as it is, after neutralization to make alkaline metal s...view more Thiodipropionic Acid (TDPA) is a high purity, free flowing white powder without caking tendency. The water solution of the product is colorless and the transparency is very high. This product is used as it is, after neutralization to make alkaline metal salt and after esterfication to make esters. view less | Request Sample |
| TMMP | Kowa American Corporation | TMMP is a polythiols in coating form for use in epoxy curing agents. Polythiols, when added in a curing agent, will contribute well to its adhesiveness. | Request Sample |
| Verazol™ WED-S | Kowa American Corporation | Verazol™ WED-S is a dark blue liquid, water dispersion. It has high electronic conductivity and obtains antistatic effect by the addition of a small amount. This nano-particle emulsion type is environmentally friendly and is very transparent in thinned la...view more Verazol™ WED-S is a dark blue liquid, water dispersion. It has high electronic conductivity and obtains antistatic effect by the addition of a small amount. This nano-particle emulsion type is environmentally friendly and is very transparent in thinned layer. view less | Request Sample |
