| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...view more AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. view less | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. | Aquapel is a hydrophobic additive to control water pickup in inks. | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. | Aquapel Three is a hydrophobic additive to control water pickup in inks. | |
| ATLAS™ 100 | Cabot Corporation - Additives | ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface...view more ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface. This product is well suited for use in electrophotographic toner applications. view less | |
| BLACK PEARLS® 120 | Cabot Corporation - Additives | BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coat...view more BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coatings. view less | |
| BLACK PEARLS® 160 | Cabot Corporation - Additives | BLACK PEARLS® 160 is a regular color opacifying and tinting carbon black offering good dispersability for plastic film and molding applications. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
| BLACK PEARLS® 280 | Cabot Corporation - Additives | BLACK PEARLS® 280 is a general purpose, easy-to-disperse carbon black with good ultraviolet and weatherability characteristics. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...view more CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. view less | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...view more CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. view less | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...view more CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. view less | |
| CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...view more CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. view less | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| ELFTEX® 320 | Cabot Corporation - Additives | ELFTEX® 320 is a low structure specialty carbon black pigment that is formulated to impart high gloss, blue undertone and moderate color strength for use in lithographic gloss inks. | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 225 is a PTFE and low molecular weight micronized polyethylene wax blend. FluoroSLIP® 225 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 511 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 605 is a spherical polyethylene wax and PTFE blend. FluoroSLIP® 605 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting polyethylene wax, and carnauba wax blend. FluoroSLIP® 731MG is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 153V is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 153V is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. | Hydrocer 257 is polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 357 is a spherical polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based ink systems. | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EE 95 is an anionic, high-density polyethylene wax emulsion. Hydrocer EE-95 is used in liquid inks for flexographic systems. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP 91 is recommended for use in aqueous ink systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion recommended for use in liquid inks. | |
| MOGUL® L | Cabot Corporation - Additives | MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equip...view more MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equipment used and the formulation. With its oxidized surface, it disperses more easily than other Cabot carbon blacks used in higher jetness applications. view less | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommened for use in water based inks. | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based liquid and UV inks. | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies, Inc. | PowderTEX 61 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies, Inc. | PowderTEX 94 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| REGAL® 250R | Cabot Corporation - Additives | REGAL® 250R is a blue tone, low vehicle carbon black that is formulated for good color strength, high load base, and high gloss. This product is well suited for use in printing ink applications. | |
| REGAL® 330 | Cabot Corporation - Additives | REGAL® 330 is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 330R | Cabot Corporation - Additives | REGAL® 330R is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 350R | Cabot Corporation - Additives | REGAL® 350R is a low structure specialty black pigment that is formulated to impart a blue tone, and maintain good gloss and moderate color strength. This product is well suited for use in lithographic gloss inks. | |
| REGAL® 400 | Cabot Corporation - Additives | REGAL® 400 is a low structure pigment black that is formulated to impart high gloss and good color strength in printing inks and other applications. | |
| REGAL® 400R | Cabot Corporation - Additives | REGAL® 400R is a regular color black pigment that has a high oxidized surface and imparts good dispersibility, high gloss and color strength. This product is well suited for use in printing inks, toners, plastics, coatings. | |
| REGAL® 660 | Cabot Corporation - Additives | REGAL® 660 is a low structure specialty black pigment that is formulated to impart high gloss and high jetness. This product is well suited for use in printing inks, coatings and general dispersions. | |
| REGAL® 660R | Cabot Corporation - Additives | REGAL® 660R is a low structure, high tinting strength regular color printing black. It is formulated for liquid and powder systems. This product is well suited for coloring leather articles, dispersions, coatings, and inks. | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-363 (Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-363 is a polyethylene wax alloy showing melting peaks ranging from 92 – 141°C. S-363 is recommended for use in liquid inks. | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-H is polyethylene wax with a DSC peak melt around 100°C and corresponding low onset of melting. S-379-H is recommended for liquid and paste inks. | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-381-N1 is a carnauba and polyethylene micronized wax alloy that has a uniform melting range peaking at 91°C. S-381-N1 is recommended for liquid inks. | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-MG (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-MG is a polyethylene wax with a DSC melt peak above 110°C. S-394-MG is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N1 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for liquid and paste inks. | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N5 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for liquid and paste inks. | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N2 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N2 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N2 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for liquid and paste inks. | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-SP5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for liquid and paste inks. | |
| S-400-N1 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is used in both the ink and coating industry. | |
| S-400-N5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-Q (EBS Wax) | Shamrock Technologies, Inc. | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-413 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| S-483 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-483 is a spherical Polyethylene wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. S-483 is recommended for liquid and paste inks. | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| SPP-10 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-10 is an isotactic polypropylene with a mean particle size of 15 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-25 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-25 is an isotactic polypropylene with a mean particle size of 25 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-300 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-300 is an isotactic polypropylene with a mean particle size of 290 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-40 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-40 is an isotactic polypropylene with a mean particle size of 40 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 8.0 µm. SST®-2 is recommended for use in water-based liquid inks. | |
| SST®-2D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in offset and liquid inks. | |
| SST®-2P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2P is a low MW PTFE powder (off-white) with a particle size mean value of 8.0 µm. SST®-2P is recommended for use in offset and liquid inks. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 5.0 µm. SST®-3 is recommended for use in offset and liquid inks. | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommended for use in offset and liquid inks. | |
| SST®-3P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3P is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3P is recommended for use in offset and liquid inks. | |
| SST®-3PS (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3PS is a sintered low MW PTFE powder (charcoal gray colored) with a particle size mean value of 5.0 µm. SST®-3PS is recommended in offset and liquid inks. | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-4 is recommended for use in offset and liquid inks. | |
| SST®-4MG (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4MG is a low MW PTFE powder (white) with a particle size mean value of 2.5 µm. SST®-4MG has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-4MG is recommended for use in offset inks. | |
| SST®-4P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4P is a low MW PTFE powder (white) with a particle size mean value of 3.0 µm. SST®-4P is recommended in offset and liquid inks. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-5 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-5 is recommened for use in offset inks. | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6005 is a cross-linked polymethyl methacrylate powder with a mean particle size of 7 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6010 is a cross-linked polymethyl methacrylate powder with a mean particle size of 10 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6014 is a cross-linked polymethyl methacrylate powder with a mean particle size of 13 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6017 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6017 is a cross-linked polymethyl methacrylate powder with a mean particle size of 19 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6030 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6030 is a cross-linked polymethyl methacrylate powder with a mean particle size of 35 microns. The TexMATTE Series are used in both liquid and offset inks. |
