| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...view more AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. view less | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. | Aquapel is a hydrophobic additive to control water pickup in inks. | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. | Aquapel Three is a hydrophobic additive to control water pickup in inks. | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 225 is a PTFE and low molecular weight micronized polyethylene wax blend. FluoroSLIP® 225 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 511 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 605 is a spherical polyethylene wax and PTFE blend. FluoroSLIP® 605 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting polyethylene wax, and carnauba wax blend. FluoroSLIP® 731MG is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 153V is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 153V is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. | Hydrocer 257 is polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 357 is a spherical polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based ink systems. | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EE 95 is an anionic, high-density polyethylene wax emulsion. Hydrocer EE-95 is used in liquid inks for flexographic systems. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP 91 is recommended for use in aqueous ink systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion recommended for use in liquid inks. | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommened for use in water based inks. | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based liquid and UV inks. | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies, Inc. | PowderTEX 61 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies, Inc. | PowderTEX 94 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-363 (Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-363 is a polyethylene wax alloy showing melting peaks ranging from 92 – 141°C. S-363 is recommended for use in liquid inks. | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-H is polyethylene wax with a DSC peak melt around 100°C and corresponding low onset of melting. S-379-H is recommended for liquid and paste inks. | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-381-N1 is a carnauba and polyethylene micronized wax alloy that has a uniform melting range peaking at 91°C. S-381-N1 is recommended for liquid inks. | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-MG (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-MG is a polyethylene wax with a DSC melt peak above 110°C. S-394-MG is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N1 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for liquid and paste inks. | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N5 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for liquid and paste inks. | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N2 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N2 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N2 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for liquid and paste inks. | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-SP5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for liquid and paste inks. | |
| S-400-N1 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is used in both the ink and coating industry. | |
| S-400-N5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-Q (EBS Wax) | Shamrock Technologies, Inc. | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-413 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| S-483 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-483 is a spherical Polyethylene wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. S-483 is recommended for liquid and paste inks. | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| SPP-10 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-10 is an isotactic polypropylene with a mean particle size of 15 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-25 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-25 is an isotactic polypropylene with a mean particle size of 25 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-300 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-300 is an isotactic polypropylene with a mean particle size of 290 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-40 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-40 is an isotactic polypropylene with a mean particle size of 40 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 8.0 µm. SST®-2 is recommended for use in water-based liquid inks. | |
| SST®-2D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in offset and liquid inks. | |
| SST®-2P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2P is a low MW PTFE powder (off-white) with a particle size mean value of 8.0 µm. SST®-2P is recommended for use in offset and liquid inks. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 5.0 µm. SST®-3 is recommended for use in offset and liquid inks. | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommended for use in offset and liquid inks. | |
| SST®-3P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3P is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3P is recommended for use in offset and liquid inks. | |
| SST®-3PS (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3PS is a sintered low MW PTFE powder (charcoal gray colored) with a particle size mean value of 5.0 µm. SST®-3PS is recommended in offset and liquid inks. | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-4 is recommended for use in offset and liquid inks. | |
| SST®-4MG (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4MG is a low MW PTFE powder (white) with a particle size mean value of 2.5 µm. SST®-4MG has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-4MG is recommended for use in offset inks. | |
| SST®-4P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4P is a low MW PTFE powder (white) with a particle size mean value of 3.0 µm. SST®-4P is recommended in offset and liquid inks. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-5 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-5 is recommened for use in offset inks. | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6005 is a cross-linked polymethyl methacrylate powder with a mean particle size of 7 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6010 is a cross-linked polymethyl methacrylate powder with a mean particle size of 10 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6014 is a cross-linked polymethyl methacrylate powder with a mean particle size of 13 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6017 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6017 is a cross-linked polymethyl methacrylate powder with a mean particle size of 19 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6030 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6030 is a cross-linked polymethyl methacrylate powder with a mean particle size of 35 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| LC-L1V3 (UV-LED Source) | Hamamatsu Corporation | The LC-L1V3 UV-LED Spot Light Source features a compact body which fits into narrow confined spaces. Choose between two high output intensity models: 10500 mW/cm2 at 365 nm and 15000 mW/cm2 at 385 nm. It is extremely stable and has a high output at a lowe...view more The LC-L1V3 UV-LED Spot Light Source features a compact body which fits into narrow confined spaces. Choose between two high output intensity models: 10500 mW/cm2 at 365 nm and 15000 mW/cm2 at 385 nm. It is extremely stable and has a high output at a lower power consumption (25W) and cost than other models. view less |  |
| LC-L2 (Modularized UV-LED Light Source) | Hamamatsu Corporation | The LC-L2 modular spot light source is comprised of a small LED driver (part #: C10559-01) and an LED head unit (part #: L10561 and L10906 series). This UV-LED modular spot light source is very compact with high output intensity light, long life and low p...view more The LC-L2 modular spot light source is comprised of a small LED driver (part #: C10559-01) and an LED head unit (part #: L10561 and L10906 series). This UV-LED modular spot light source is very compact with high output intensity light, long life and low power consumption. An unusual feature of this unit is that it does not have a fan and does not require one for cooling, making this an easy addition to a clean room. Various LED head units with different irradiation patterns and sizes are available. view less |  |
| LC-L5 G (UV-LED Light Source) | Hamamatsu Corporation | A linear irradiation type UV-LED unit, the LC-L5 G has high output (10,000 mW/cm^2), air cooling by fan, and a compact and light weight. It is recommended for UV ink drying, UV coating agent drying, and for fluorescence excitation/scratch & flaw inspectio...view more A linear irradiation type UV-LED unit, the LC-L5 G has high output (10,000 mW/cm^2), air cooling by fan, and a compact and light weight. It is recommended for UV ink drying, UV coating agent drying, and for fluorescence excitation/scratch & flaw inspection lighting. view less | |
| LC-L5 (UV-LED Light Source) | Hamamatsu Corporation | A linear irradiation type UV-LED unit, the LC-L5 comes in a new smaller package and will work in new production processes and devices which can not accomodate conventional lamps. The UV-LED spot lights are 90% smaller, use 1/30th power as ordinary UV lamp...view more A linear irradiation type UV-LED unit, the LC-L5 comes in a new smaller package and will work in new production processes and devices which can not accomodate conventional lamps. The UV-LED spot lights are 90% smaller, use 1/30th power as ordinary UV lamps, and cut CO2 emissions by 20,000 kg per year. These units produce stable and accurate outputs with a long service life and require no duct installation or chillers. view less |  |
| LC8 | Hamamatsu Corporation | The LC8 UV Spot Light Source is available in different configurations, a front light guide port (part #: L9588 series) or a rear light guide port (part #: L9566 series). Each configuration is available in three wavelength ranges. Features include long lif...view more The LC8 UV Spot Light Source is available in different configurations, a front light guide port (part #: L9588 series) or a rear light guide port (part #: L9566 series). Each configuration is available in three wavelength ranges. Features include long life time (4000 hours), and easily changeable lamps for low down time. view less |  |
