| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...view more AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. view less | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. | Aquapel is a hydrophobic additive to control water pickup in inks. | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. | Aquapel Three is a hydrophobic additive to control water pickup in inks. | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect o...view more Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol. view less | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...view more Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. view less | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...view more Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. view less | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...view more Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). view less | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...view more Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. view less | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...view more Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. view less | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...view more DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. view less | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...view more DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. view less | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 225 is a PTFE and low molecular weight micronized polyethylene wax blend. FluoroSLIP® 225 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 511 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 605 is a spherical polyethylene wax and PTFE blend. FluoroSLIP® 605 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting polyethylene wax, and carnauba wax blend. FluoroSLIP® 731MG is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 153V is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 153V is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. | Hydrocer 257 is polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 357 is a spherical polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based ink systems. | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EE 95 is an anionic, high-density polyethylene wax emulsion. Hydrocer EE-95 is used in liquid inks for flexographic systems. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP 91 is recommended for use in aqueous ink systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion recommended for use in liquid inks. | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommened for use in water based inks. | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based liquid and UV inks. | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies, Inc. | PowderTEX 61 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies, Inc. | PowderTEX 94 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-363 (Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-363 is a polyethylene wax alloy showing melting peaks ranging from 92 – 141°C. S-363 is recommended for use in liquid inks. | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-H is polyethylene wax with a DSC peak melt around 100°C and corresponding low onset of melting. S-379-H is recommended for liquid and paste inks. | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-381-N1 is a carnauba and polyethylene micronized wax alloy that has a uniform melting range peaking at 91°C. S-381-N1 is recommended for liquid inks. | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-MG (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-MG is a polyethylene wax with a DSC melt peak above 110°C. S-394-MG is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N1 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for liquid and paste inks. | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N5 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for liquid and paste inks. | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N2 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N2 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N2 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for liquid and paste inks. | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-SP5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for liquid and paste inks. | |
| S-400-N1 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is used in both the ink and coating industry. | |
| S-400-N5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-Q (EBS Wax) | Shamrock Technologies, Inc. | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-413 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| S-483 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-483 is a spherical Polyethylene wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. S-483 is recommended for liquid and paste inks. | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| SPP-10 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-10 is an isotactic polypropylene with a mean particle size of 15 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-25 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-25 is an isotactic polypropylene with a mean particle size of 25 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-300 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-300 is an isotactic polypropylene with a mean particle size of 290 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-40 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-40 is an isotactic polypropylene with a mean particle size of 40 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 8.0 µm. SST®-2 is recommended for use in water-based liquid inks. | |
| SST®-2D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in offset and liquid inks. | |
| SST®-2P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2P is a low MW PTFE powder (off-white) with a particle size mean value of 8.0 µm. SST®-2P is recommended for use in offset and liquid inks. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 5.0 µm. SST®-3 is recommended for use in offset and liquid inks. | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommended for use in offset and liquid inks. | |
| SST®-3P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3P is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3P is recommended for use in offset and liquid inks. | |
| SST®-3PS (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3PS is a sintered low MW PTFE powder (charcoal gray colored) with a particle size mean value of 5.0 µm. SST®-3PS is recommended in offset and liquid inks. | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-4 is recommended for use in offset and liquid inks. | |
| SST®-4MG (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4MG is a low MW PTFE powder (white) with a particle size mean value of 2.5 µm. SST®-4MG has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-4MG is recommended for use in offset inks. | |
| SST®-4P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4P is a low MW PTFE powder (white) with a particle size mean value of 3.0 µm. SST®-4P is recommended in offset and liquid inks. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-5 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-5 is recommened for use in offset inks. | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6005 is a cross-linked polymethyl methacrylate powder with a mean particle size of 7 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6010 is a cross-linked polymethyl methacrylate powder with a mean particle size of 10 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6014 is a cross-linked polymethyl methacrylate powder with a mean particle size of 13 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6017 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6017 is a cross-linked polymethyl methacrylate powder with a mean particle size of 19 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6030 (PMMA Powder) | Shamrock Technologies, Inc. | TexMATTE 6030 is a cross-linked polymethyl methacrylate powder with a mean particle size of 35 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has a viscosity (Brookfield @ 25°C) of 40-60P, a moisture content of 0.05% max., and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has an acid value (as supplied) of 0.8mg KOH/g max., a viscosity (Brookfield @ 25°C (as supplied)) of 15-30 Poise, and a colour (APHA) of 250 max. view less | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids ...view more TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. view less | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating h...view more TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P. view less |
