| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...view more EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. view less | Request Sample |
| KOMERATE A099 | Green Chemical Co., Ltd. | KOMERATE A099 is a reactive diluent that polymerizes when exposed to sources of free radicals. | |
| N-Vinylpyrrolidone, NVP | BASF SE, Intermediates Division | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...view more N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. view less | |
| MIRAMER M3130 | Rahn USA Corp. | MIRAMER M3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. | Request Sample |
| N-Vinyl-Caprolactam, NVC | BASF SE, Intermediates Division | N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototypin...view more N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototyping. N-Vinylcaprolactame, is a co-monomer for hydrophobic modified PVP (Polyvinylpyrrolidone) especially used in oilfield, cosmetics and adhesives. view less | |
| SR261 | Sartomer Americas | SR261 is a difunctional methacrylic monomer designed for use as a reactive diluent in free radical polymerization systems or as a polymer crosslinker. | |
| EBECRYL® 114 | Allnex | EBECRYL® 114 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings and inks to control viscosity and increase adhesion and flexibility. It is ...view more EBECRYL® 114 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings and inks to control viscosity and increase adhesion and flexibility. It is recommended as a reactive diluent for: Coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings. view less | Request Sample |
| VISIOMER® THFMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® THFMA is a low viscosity, low odor mono methacrylate monomer that impacts flexibility and adhesion to adhesive applications. Due to its low volatility, it can be used as reactive diluent for reactive systems, e.g. adhesives | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| KOMERATE D021 | Green Chemical Co., Ltd. | KOMERATE D021 is dipropyleneglycol diacrylate. It is a good diluent monomer with low volatility, and high Tg. It is a reactive diluent for radically curable inks, coatings and adhesives. | |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| OTA 480 | Allnex | OTA-480 is a triacrylated reactive diluent based on a glycerol derivative. It exhibits low viscosity and good flexibility for a triacrylate and its high functionality contributes to good reactivity and hardness. | Request Sample |
| MIRAMER M210 | Rahn USA Corp. | MIRAMER M210 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks, metal varnishes and plastic coatings. | Request Sample |
| MIRAMER M284 | Rahn USA Corp. | MIRAMER M284 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks, industrial coatings and wood coatings. | Request Sample |
| MIRAMER M166 | Rahn USA Corp. | MIRAMER M166 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, plastic coatings and metal varnishes. | Request Sample |
| SARBIO® 6102 Resin | Sartomer Americas | SARBIO® 6102 Resin is an excellent reactive diluent for oligomers. It produces polymers through free radical curing that have a high glass transition temperature. It exhibits good adhesion and chemical resistance. | |
| GENOMER* 1254M | Rahn USA Corp. | GENOMER* 1254M is a highly reactive difunctional methacrylate ester with low volatility and good heat resistance. Ethoxylated Bisphenol A Dimethacrylate monomer. Reactive diluent for free radical-curable inks, coatings, adhesives, and 3D printing applicat...view more GENOMER* 1254M is a highly reactive difunctional methacrylate ester with low volatility and good heat resistance. Ethoxylated Bisphenol A Dimethacrylate monomer. Reactive diluent for free radical-curable inks, coatings, adhesives, and 3D printing applications. view less | Request Sample |
| SARBIO® 5102 Resin | Sartomer Americas | SARBIO® 5102 Resin is an excellent reactive diluent for oligomers. The chemistry produces polymers through free radical curing that have a high glass transition temperature. It exhibits good adhesion and chemical resistance. | |
| SR256 | Sartomer Americas | SR256 is a slightly water dispersible, monofunctional monomer which acts as a reactive diluent. Suggested applications include: pressure sensitive adhesives, chemical intermediates, metal, paper, PVC floor and wood coatings, electronics, inks, and paints. | |
| GENOMER* 1226 | Rahn USA Corp. | GENOMER* 1126 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a di-functional acrylate that exhibits low viscosity, low odor and good cutting power. | Request Sample |
| SR506A | Sartomer Americas | SR506A, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature. Suggested applications include: adhesives, coatings, electronics, and...view more SR506A, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature. Suggested applications include: adhesives, coatings, electronics, and inks. view less | |
| GENOMER* 1125 | Rahn USA Corp. | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| MIRAMER M216 | Rahn USA Corp. | MIRAMER M216 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, metal varnishes, plastic coatings, wood coatings and printing inks. | Request Sample |
| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| GENOMER* 4293 | Rahn USA Corp. | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| DPGDA | Allnex | DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with g...view more DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance. view less | Request Sample |
| MIRAMER M3190 | Rahn USA Corp. | MIRAMER M3190 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesi...view more MIRAMER M3190 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesives; and printing inks. view less | Request Sample |
| MIRAMER M164 | Rahn USA Corp. | MIRAMER M164 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and metal varnishes. It exhibits high flexibility, good adhesion and low ...view more MIRAMER M164 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and metal varnishes. It exhibits high flexibility, good adhesion and low shrinkage. view less | Request Sample |
| MIRAMER M340 | Rahn USA Corp. | MIRAMER M340 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; wood and industrial coatings; metal varnishes; solder masks; ...view more MIRAMER M340 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; wood and industrial coatings; metal varnishes; solder masks; and printing inks. view less | Request Sample |
| GENOMER* 1122 | Rahn USA Corp. | GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; ...view more GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. view less | Request Sample |
| GENOMER* 1122TF | Rahn USA Corp. | GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings...view more GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. view less | Request Sample |
| Speedcure 976D | Lambson Group Ltd. | SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulat...view more SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations. view less | |
| MIRAMER M286 | Rahn USA Corp. | MIRAMER M286 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It is water soluble, has high flexibility and exhibits low shrinkage. This product is recommended for use in adhesives, printing inks and ...view more MIRAMER M286 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It is water soluble, has high flexibility and exhibits low shrinkage. This product is recommended for use in adhesives, printing inks and industrial coatings. view less | Request Sample |
| MIRAMER LR3130 | Rahn USA Corp. | MIRAMER LR3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It is ideal for use in printing inks and varnishes, paper and board varnishes, wood and industrial coatings, plastic coatings and overpri...view more MIRAMER LR3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It is ideal for use in printing inks and varnishes, paper and board varnishes, wood and industrial coatings, plastic coatings and overprint varnishes. view less | Request Sample |
| MIRAMER M360 | Rahn USA Corp. | MIRAMER M360 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesiv...view more MIRAMER M360 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesives; printing inks; and printed circuit boards. view less | Request Sample |
| MIRAMER M282 | Rahn USA Corp. | MIRAMER M282 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and PVC flooring. It exhibits low volatility, high flexibility, good ad...view more MIRAMER M282 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and PVC flooring. It exhibits low volatility, high flexibility, good adhesion and good solvent resistance. view less | Request Sample |
| EBECRYL® 160 | Allnex | EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and tou...view more EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists. view less | Request Sample |
| DOWSIL™ 3074 Intermediate | Univar Solutions | DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC h...view more DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC high temperature coatings. view less | Request Sample |
| SR440 | Sartomer Americas | SR-440, isooctyl acrylate, is a low viscosity, monofunctional monomer which acts as a reactive diluent. Performance properties include: good adhesion, good water resistance, good weatherability, high flexibility and low shrinkage. Suggested applications i...view more SR-440, isooctyl acrylate, is a low viscosity, monofunctional monomer which acts as a reactive diluent. Performance properties include: good adhesion, good water resistance, good weatherability, high flexibility and low shrinkage. Suggested applications include: adhesives, pressure sensitive adhesives, coatings and inks. view less | |
| MIRAMER M122 | Rahn USA Corp. | MIRAMER M122 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, industrial coatings and plastic coatings. It exhibits low shrinkage, high flexibility, hi...view more MIRAMER M122 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, industrial coatings and plastic coatings. It exhibits low shrinkage, high flexibility, high water resistance and good weather resistance. view less | Request Sample |
| GENOMER* 2253 | Rahn USA Corp. | GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and v...view more GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and varnishes for paper, board and plastics. view less | Request Sample |
| TMPTA | Allnex | TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effe...view more TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effective diluent compatible with the wide range of acrylated resins used in radiation curing applications. view less | Request Sample |
| SETATHANE® D 1156 | Allnex | SETATHANE® D 1156 is a branched, castor oil-based polyol used as as a reactive diluent in combinationwith e.g. SETATHANE® D 1145, SETATHANE® D 1150 and SETATHANE® D 1160 in the formulation of two-component polyurethane formulations and coatings to modify ...view more SETATHANE® D 1156 is a branched, castor oil-based polyol used as as a reactive diluent in combinationwith e.g. SETATHANE® D 1145, SETATHANE® D 1150 and SETATHANE® D 1160 in the formulation of two-component polyurethane formulations and coatings to modify physical and mechanical properties. view less | Request Sample |
| TPGDA | Allnex | TPGDA (Tripropylene glycol diacrylate) is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ult...view more TPGDA (Tripropylene glycol diacrylate) is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. view less | Request Sample |
| HDDA | Allnex | HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, w...view more HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance. view less | Request Sample |
| MIRAMER M140 | Rahn USA Corp. | MIRAMER M140 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; industrial coatings; flexo inks; screen inks; and gravure inks...view more MIRAMER M140 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; industrial coatings; flexo inks; screen inks; and gravure inks. It exhibits low volatility, good flexibility, good adhesion and low shrinkage. view less | Request Sample |
| MIRAMER M200 | Rahn USA Corp. | MIRAMER M200 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; overprint varnishes; wood, plastic and indu...view more MIRAMER M200 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; overprint varnishes; wood, plastic and industrial coatings; and paper and board varnishes. The cured product provides outstanding weatherability. view less | Request Sample |
| GENOMER* 1121M | Rahn USA Corp. | GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coa...view more GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coatings on glass; adhesives; and polymerization and copolymerization in emulsions and solutions. view less | Request Sample |
| MIRAMER M240 | Rahn USA Corp. | MIRAMER M240 is an ethoxylated Bisphenol A diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It has good hardness and abrasion resistance, high gloss, high chemical resistance, and good adhesion. This product is reco...view more MIRAMER M240 is an ethoxylated Bisphenol A diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It has good hardness and abrasion resistance, high gloss, high chemical resistance, and good adhesion. This product is recommended for use in printing inks and varnishes, wood coatings, industrial coatings and electronics. view less | Request Sample |
| MIRAMER M130 | Rahn USA Corp. | MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen ...view more MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen inks. It is an excellent adhesion promoter due to its very low surface tension. view less | Request Sample |
| DMAA | Rahn USA Corp. | DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxyg...view more DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxygen penetration and water holding capacity. DMAA and its homopolymers are water soluble. view less | Request Sample |
| MIRAMER M280 | Rahn USA Corp. | MIRAMER M280 is a polyethylenglycol 400 diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, printing inks and varnishes, wood and industrial coatings, water soluble scr...view more MIRAMER M280 is a polyethylenglycol 400 diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, printing inks and varnishes, wood and industrial coatings, water soluble screen inks and plastic coatings. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiator. view less | Request Sample |
| MIRAMER M220 | Rahn USA Corp. | MIRAMER M220 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coati...view more MIRAMER M220 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. view less | Request Sample |
| MIRAMER M222 | Rahn USA Corp. | MIRAMER M222 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coati...view more MIRAMER M222 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. view less | Request Sample |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent...view more Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. view less | |
| MIRAMER M410 | Rahn USA Corp. | MIRAMER M410 is a polyetherpolyol tetraacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: inks (flexo, gravure, offset, screen); paper, board, and wood ...view more MIRAMER M410 is a polyetherpolyol tetraacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: inks (flexo, gravure, offset, screen); paper, board, and wood coatings; solder masks; and plastic coatings. The product combines low reaction shrinkage with a high surface hardness. view less | Request Sample |
| MIRAMER M320 | Rahn USA Corp. | MIRAMER M320 is a polyetherpolyoltriacrylate. This product is recommended for use in the following applications: paper and board finishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. It is a reactive diluent...view more MIRAMER M320 is a polyetherpolyoltriacrylate. This product is recommended for use in the following applications: paper and board finishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. It is a reactive diluent for radically curable inks, coatings and adhesives. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiator. view less | Request Sample |
| MIRAMER M170 | Rahn USA Corp. | MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the follow...view more MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the following applications: pressure sensitive adhesives; printed circuit boards; metal, plastic and paper coatings; and PVC flooring. view less | Request Sample |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| MIRAMER M300 | Rahn USA Corp. | MIRAMER M300 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: overprint varnishes; printing inks and varnishes; paper and board varnis...view more MIRAMER M300 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: overprint varnishes; printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic coatings. The cured product provides high crosslinked density and chemical resistance. view less | Request Sample |
| EBECRYL® 140 | Allnex | EBECRYL® 140 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications. Effective levels of EBECRYL® 140 typically range from 10% to 30%, depending on the application. In lithographic inks and varnish...view more EBECRYL® 140 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications. Effective levels of EBECRYL® 140 typically range from 10% to 30%, depending on the application. In lithographic inks and varnishes it is quite effective in adjusting viscosity while maintaining or improving cure response and physical properties. view less | Request Sample |
| EBECRYL® 118 | Allnex | EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and...view more EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improve substrate adhesion. view less | Request Sample |
| LAROMER® PPTTA | BASF Dispersions & Resins | LAROMER PPTTA is a low viscous tetrafunctional polyether acrylate serving as reactive diluent for oligomers such as epoxy acrylates, polyester acrylates and urethane acrylates. It features high cure speed in all kinds of UV/EB applications and results in ...view more LAROMER PPTTA is a low viscous tetrafunctional polyether acrylate serving as reactive diluent for oligomers such as epoxy acrylates, polyester acrylates and urethane acrylates. It features high cure speed in all kinds of UV/EB applications and results in hard, but still flexible films due to its fairly low shrinkage compared with other tetrafunctional monomers. view less | |
| TMPEOTA | Allnex | TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while ma...view more TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers. view less | Request Sample |
| PETRA | Allnex | PETRA (Pentaerythritol acrylate) is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslink...view more PETRA (Pentaerythritol acrylate) is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. PETRA is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. view less | Request Sample |
| EBECRYL® 4265 | Allnex | EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curabl...view more EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| EBECRYL® 130 | Allnex | EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties o...view more EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. It is recommended for use in: scratch and abrasion resistant coatings, coatings requiring increased thermal resistance, and inkjet inks. view less | Request Sample |
| EBECRYL® 110 | Allnex | EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for E...view more EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for EBECRYL® 110 include: coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings. view less | Request Sample |
| ACURE™ 510-400 | Allnex | ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionality allows this reactive diluent...view more ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionality allows this reactive diluent to crosslink and react in to the polymer network and is used as a modifying donor resin in ACURE™ systems. view less | Request Sample |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| EBECRYL® 264 | Allnex | EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance,...view more EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance, and are resistant to yellowing. It is recommended for use in: coatings for wood flooring, plastic coatings, overprint varnishes, screen inks, and light stable coatings. view less | Request Sample |
| DPHA | Allnex | DPHA (Acrylated dipentaerythritol) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure ...view more DPHA (Acrylated dipentaerythritol) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure response, hardness and scratch/abrasion resistance are desired. DPHA is composed predominately of the penta- and hexa-acrylate esters of dipentaerythritol, with the overall composition represented by the included chemical structure. view less | Request Sample |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| EBECRYL® 3748/20 | Allnex | EBECRYL® 3748/20 is a bisphenol A epoxy diacrylate, diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480)(1) for reduced viscosity and easier handling. \r\nEBECRYL® 3748/20 exhibits light color and fast cure response....view more EBECRYL® 3748/20 is a bisphenol A epoxy diacrylate, diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480)(1) for reduced viscosity and easier handling. \r\nEBECRYL® 3748/20 exhibits light color and fast cure response. Films of EBECRYL® 3748/20 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance. view less | Request Sample |
| EBECRYL® 605/40 | Allnex | EBECRYL® 605/40 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fa...view more EBECRYL® 605/40 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL® 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance. view less | Request Sample |
| MIRAMER M600 | Rahn USA Corp. | MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen i...view more MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and overprint varnishes. The cured product provides very high cross linked density and chemical resistance. It is used up to 70% in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF SE, Intermediates Division | Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based se...view more Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase. Triethylenglycol divinyl ether is used for UV-coatings (wood, printing inks) and UV adhesives. view less | |
| SR423A | Sartomer Americas | SR423A, isobornyl methacrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature. Performance properties include: good adhesion good chemical ...view more SR423A, isobornyl methacrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature. Performance properties include: good adhesion good chemical resistance, good hardness, good heat resistance, good water resistance, good weatherability, high abrasion resistance, high flexibility, high impact strength and low shrinkage. Suggested applications include: adhesives, structural adhesives, chemical intermediates, coatings, metal coatings, concrete polymer and plastics. view less | |
| EBECRYL® 605/20 | Allnex | EBECRYL® 605/20 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/20 exhibits light color and fa...view more EBECRYL® 605/20 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/20 exhibits light color and fast cure response. Films of EBECRYL® 605/20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin. view less | Request Sample |
| EBECRYL® 445 | Allnex | Ebecryl®445 is a chlorinated polyester resin diluted with 40% of trimethylolpropane triacrylate (TMPTA) monomer. Ebecryl®445 exhibits good wet lithographic behaviour and pigment wetting properties. UV (ultraviolet light) cured films based on Ebecryl 445, display good adhesion to metals, plastics and paper. Ebecryl®445 can be diluted with reactive monomers such as trimethylolpropane triacrylate (TMPTA), oligotriacrylate (OTA 480), tripropyleneglycol diacrylate (TPGDA) and 1,6 hexanediol diacrylate (HDDA). The specific reactive diluent...view more Ebecryl®445 is a chlorinated polyester resin diluted with 40% of trimethylolpropane triacrylate (TMPTA) monomer. Ebecryl®445 exhibits good wet lithographic behaviour and pigment wetting properties. UV (ultraviolet light) cured films based on Ebecryl 445, display good adhesion to metals, plastics and paper. Ebecryl®445 can be diluted with reactive monomers such as trimethylolpropane triacrylate (TMPTA), oligotriacrylate (OTA 480), tripropyleneglycol diacrylate (TPGDA) and 1,6 hexanediol diacrylate (HDDA). The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility. view less | Request Sample |
| EBECRYL® 4883 | Allnex | EBECRYL® 4883 is an aliphatic urethane diacrylate diluted 15% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA). Films of EBECRYL® 4883 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility...view more EBECRYL® 4883 is an aliphatic urethane diacrylate diluted 15% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA). Films of EBECRYL® 4883 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with good exterior durability and resistance to yellowing. It is recommended for use in: post-formable coatings for metal tube and conduit, non-yellowing topcoats for wood, silkscreen inks for plastics, and exterior durable coatings. view less | Request Sample |
| EBECRYL® 8501 | Allnex | EBECRYL® 8501 is an aliphatic urethane acrylate designed for use in automotive refinish and general metal applications. Films of EBECRYL® 8501 exhibit a unique blend of flexibility and toughness coupled with good corrosion resistance. It contains isobornyl acrylate (IBOA) as a reactive diluent...view more EBECRYL® 8501 is an aliphatic urethane acrylate designed for use in automotive refinish and general metal applications. Films of EBECRYL® 8501 exhibit a unique blend of flexibility and toughness coupled with good corrosion resistance. It contains isobornyl acrylate (IBOA) as a reactive diluent. EBECRYL® 8501 is recommended for use in: low energy cure, automotive end of line spot repair, automotive refinish, general metal, metallized plastics, flexible filled coatings, and thin film solar cell. view less | Request Sample |
| LAROMER® POEA | BASF Dispersions & Resins | LAROMER POEA is an acrylic acid ester monomer that is used as a reactive diluent in energy curable coatings, inks, overprint varnishes, as a feedstock for synthesis, and for manufacturing polymers. It contains one polymerizable acrylate group per molecule...view more LAROMER POEA is an acrylic acid ester monomer that is used as a reactive diluent in energy curable coatings, inks, overprint varnishes, as a feedstock for synthesis, and for manufacturing polymers. It contains one polymerizable acrylate group per molecule, which enables it to form copolymers of, for example, acrylic or methacrylic acids and their salts, amides, esters, vinyl acetate, and styrene. Readily entering into addition reactions, LAROMER POEA is also an important feedstock for chemical synthesis. view less | |
| EBECRYL® 524 | Allnex | EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrat...view more EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is recommended for: laminating adhesives, particularly between paper/aluminum, paper/LDPE, paper/polypropylene and aluminum/LDPE, primer coatings on metal, metallization receptive coatings on plastics, and improving intercoat adhesion. view less | Request Sample |
| N-Dodecyl vinyl ether, DDVE | BASF SE, Intermediates Division | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...view more N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| EBECRYL® 8411 | Allnex | EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in...view more EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing. It is recommended for use in: screen inks for plastics, screen inks for lamination, thermoformable screen inks, coatings for metal, wood, paper and plastics, and coatings requiring exterior durability. view less | Request Sample |
| EBECRYL® 438 | Allnex | EBECRYL® 438 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent OTA-480. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Films ...view more EBECRYL® 438 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent OTA-480. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Films of EBECRYL® 438 cured by ultraviolet light (UV) display good adhesion to metals, plastics and paper. EBECRYL® 438 is recommended for: wet lithographic inks for paper, plastics, and metals, promoting adhesion for coatings on metal, plastics and paper, overprint varnishes applied by lithography, and post-formable inks. view less | Request Sample |
| EBECRYL® 4266 | Allnex | EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB c...view more EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB cured polymers of EBECRYL® 4266 exhibit a balance of hardness and flexibility. It is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet and film. view less | Request Sample |
| SETAL® 26-3705 | Allnex | SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-iso...view more SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-isocyanates, polyamines, poly-ketimines and unsaturated polyesters or acrylics. SETAL® 26-3705 was developed for the next generation of non-isocyanate two component primer systems. When reacted with SETAL® 26-3701 and SETAL®UX 10-1440, this system provides much faster dry versus a standard two-component isocyanateprimer system without the negative health and safety issues associated with isocyanates. view less | Request Sample |
| EBECRYL® 8812 | Allnex | EBECRYL® 8812 is an aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 8812. EBECRYL 8812 is diluted with 10% by weight of the reactive diluent...view more EBECRYL® 8812 is an aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 8812. EBECRYL 8812 is diluted with 10% by weight of the reactive diluent ethoxyethoxyethyl acrylate (EOEOEA). Films of EBECRYL 8812 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness, rapid cure response and resistance to yellowing. view less | Request Sample |
| EBECRYL® 8405 | Allnex | EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, ...view more EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing. EBECRYL® 8405 is recommended for use in: automotive OEM or re-finish, coatings for wood and plastic requiring excellent exteriordurability, metal coatings, post-formable coatings for metal tube and conduit, optical coatings, non-yellowing topcoats for wood, pigmented coatings for wood, screen inks, and exterior durable coatings. view less | Request Sample |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| LAROMER® PO 9102 | BASF Dispersions & Resins | LAROMER PO 9102 is a hydrophobic difunctional monomer with a well balanced performance profile that makes it a versatile reactive diluent for adhesive, graphic arts, wood coatings and industrial coatings applications covering a wide range of substrates fr...view more LAROMER PO 9102 is a hydrophobic difunctional monomer with a well balanced performance profile that makes it a versatile reactive diluent for adhesive, graphic arts, wood coatings and industrial coatings applications covering a wide range of substrates from paper and board over plastic films to metal. Main properties are its low surface tension that promotes flow and levelling and together with its propoxylation greatly facilitates pigment wetting. The low shrinkage also supports adhesion on plastics and imparts flexibility. LAROMER PO 9102 is a key monomer for the formulation of UV inkjet inks with its low viscosity, good flexibility and outstanding substrate and pigment wetting properties. view less | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...view more Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. view less | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...view more Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. view less | |
| EBECRYL® 7100 | Allnex | EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an acceleratin...view more EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an accelerating effect on the UV cure speed. It is recommended for: coatings for paper and plastics, overprint varnishes, screen inks, and wood topcoats. view less | Request Sample |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...view more UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. view less | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluent...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less |
