| SLIP-AYD® FS 444 | Elementis | SLIP-AYD® FS 444 is a liquid additive for increasing surface slip and mar resistance of water borne and polar solvent borne coatings. | |
| SLIP-AYD® SL 551 | Elementis | SLIP-AYD® SL 551 is a solventborne dispersion of a high melt polyethylene wax in Aromatic 100/n-Butanol solvents. SL 551 provides exceptional resistance to blocking, abrasion and improved slip properties. | |
| SLIP-AYD® SL 600 | Elementis | SLIP-AYD® SL 600 is a 100 % solventborne powder, specialty wax, suitable for variety of coating and ink applications.This product provides excellent slip, abrasion and block resistance properties for all types of solvent and water based coatings and inks. | |
| SLIP-AYD® SL 404 | Elementis | SLIP-AYD® SL 404 is a fine particle size solventborne dispersion of hard polymeric wax in 2-Butoxyethanol solvent. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent...view more SLIP-AYD® SL 404 is a fine particle size solventborne dispersion of hard polymeric wax in 2-Butoxyethanol solvent. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less | |
| SLIP-AYD® SL 425 | Elementis | SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide ra...view more SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide range solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less | |
| SLIP-AYD® SL 50 | Elementis | SLIP-AYD® SL 50 is a solventborne dispersion of polyethylene wax in xylene solvent. It provides significant reduction of coefficient of friction and good resistance to marring, scuffing, abrasion and metal marking. | |
| SLIP-AYD® SL 18 | Elementis | SLIP-AYD® SL 18 is a waterborne/solventborne dispersion of polyethylene wax in 2-Butxyethanol solvent. It provides significant reduction of coefficient of friction and good resistance to marring, scuffing, abrasion and metal marking. | |
| SLIP-AYD® SL 1606 | Elementis | SLIP-AYD® SL 1606 is a 100 % oxidized waterborne/solventborne polyethylene powder, specialty wax, suitable for variety of coatings and ink applications. It provides excellent mar, abrasion and block resistance properties in industrial coatings and inks. | |
| SLIP-AYD® SL 78 | Elementis | SLIP-AYD® SL 78 is a solventborne dispersion of polyethylene wax in short-oil coconut alkyd resin/xylene solvent. It provides significant reduction of coefficient of friction and good resistance to marring, scuffing, abrasion and metal marking. | |
| SLIP-AYD® SL 508 | Elementis | SLIP-AYD® SL 508 is a fine particle size waterborne dispersion of carnauba wax in isopropanol solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used in a wide range of aqueous and so...view more SLIP-AYD® SL 508 is a fine particle size waterborne dispersion of carnauba wax in isopropanol solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. view less | |
| SLIP-AYD® SL 295A | Elementis | SLIP-AYD® SL 295A provides improved surface characteristics of coatings. This is one of several waterborne wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic wa...view more SLIP-AYD® SL 295A provides improved surface characteristics of coatings. This is one of several waterborne wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. view less | |
| SLIP-AYD® SL 506 | Elementis | SLIP-AYD® SL 506 is a fine particle size waterborne/solventborne dispersion of carnauba wax in dipropylene glycol methyl ether solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used ...view more SLIP-AYD® SL 506 is a fine particle size waterborne/solventborne dispersion of carnauba wax in dipropylene glycol methyl ether solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. view less | |
| SLIP-AYD® SL 300 | Elementis | SLIP-AYD® SL 300 is waterborne/solventborne, and provides improved surface characteristics of coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular...view more SLIP-AYD® SL 300 is waterborne/solventborne, and provides improved surface characteristics of coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. view less | |
| SLIP-AYD® SL 177 | Elementis | SLIP-AYD® SL 177 provides improved surface characteristics of waterborne/solventborne coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight ...view more SLIP-AYD® SL 177 provides improved surface characteristics of waterborne/solventborne coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. The effect of a wax can be altered by blending several waxes together. view less | |
| AFCONA - 3033 | AFCONA Additives Sdn Bhd | AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds applica...view more AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds application in wood and clear coatings, thermoplastic resins, NC, acid curing, polyurethanes, and in printing inks. view less | |
| TEGO® Glide 490 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 490 is a highly efficient emulsion providing slip and anti-blocking properties in aqueous formulations. It is free of aromatic solvents and tin. | Request Sample |
| TEGO® Glide 492 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 492 is a highly efficient emulsion providing slip and anti-blocking properties in aqueous formulations. It is free of aromatic solvents and tin, and is suitable for Ecolabel compliant formulations. | Request Sample |
| TEGO® Glide 496 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 496 provides outstanding slip and touch properties without compromising recoatability and compatibility. It is highly effective and can be used in a broad range of different coating and ink systems. | Request Sample |
| TEGO® Glide 494 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and sli...view more TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and slippery touch and is free of aromatic solvents and tin. view less | Request Sample |
| AFCONA - 3250 | AFCONA Additives Sdn Bhd | AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam sta...view more AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, ultraviolet coatings, and printing inks. view less | |
| BYK®-3753 | BYK | BYK®-3753 is a silicone-containing surface additive for solvent-borne, solvent-free and aqueous coatings and printing inks with a medium reduction in surface tension and a medium increase in surface slip. | |
| AFCONA - 3231 | AFCONA Additives Sdn Bhd | AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds appl...view more AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds application in metal coatings such as industrial baking systems, car refinish polyurethane top clear coats, and in printing inks. view less | |
| CERETAN MXS 3815 | Munzing Chemie | CERETAN MXS 3815 is a white fine powder that is a spherical, micronized functional blend, coated with silica. It has high transparency and provides matting effect, scratch resistance, and is a slip agent. It is commonly used in printing inks, paints and w...view more CERETAN MXS 3815 is a white fine powder that is a spherical, micronized functional blend, coated with silica. It has high transparency and provides matting effect, scratch resistance, and is a slip agent. It is commonly used in printing inks, paints and wood and industrial coatings. view less | |
| AFCONA - 3280 | AFCONA Additives Sdn Bhd | AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration ...view more AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy flooring compounds, and in ultraviolet-curing inks and coatings. view less | |
| TEGO® Rad 2330 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2330 is an efficient low-foaming radically cross-linkable substrate wetting and slip additive, providing wetting and flow properties. Recommended for broad areas of application. | Request Sample |
| SILCO GA 5143 | CHT USA (formerly ICM) | SILCO GA 5143 is an 80% active non-ionic emulsion of extremely high molecular weight polydimethylsiloxane. This emulsion is completely VOC free and specially developed to impart slip and mar resistance in water borne systems. SILCO GA 5143 reduces the coe...view more SILCO GA 5143 is an 80% active non-ionic emulsion of extremely high molecular weight polydimethylsiloxane. This emulsion is completely VOC free and specially developed to impart slip and mar resistance in water borne systems. SILCO GA 5143 reduces the coefficient of friction, provides antilocking, and imparts leveling and wetting. view less | |
| TEGO® Rad 2250 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2250 is a radiation-curing substrate wetting, flow and slip additive. It is a clear liquid silicone polyether acrylate. TEGO® Rad 2250 is a universal product for improving the most important surface properties of radiation-curing coatings. It is...view more TEGO® Rad 2250 is a radiation-curing substrate wetting, flow and slip additive. It is a clear liquid silicone polyether acrylate. TEGO® Rad 2250 is a universal product for improving the most important surface properties of radiation-curing coatings. It is radically crosslinkable and is suitable for flow promotion, slip effect, and substrate wetting. It is used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2250. view less | Request Sample |
| PAT-ADD LE 1010 | Patcham USA | PAT-ADD LE 1010 is a leveling agent and slip agent for use in solvent-borne coatings. PAT-ADD LE 1010 is versatile in application and effective in various solvent-borne systems for optimizing flow, leveling slip, and mar resistance. Main benefits are: hig...view more PAT-ADD LE 1010 is a leveling agent and slip agent for use in solvent-borne coatings. PAT-ADD LE 1010 is versatile in application and effective in various solvent-borne systems for optimizing flow, leveling slip, and mar resistance. Main benefits are: highly effective leveling agent, increases slip and mar resistance, wide compatibility, limited foam stabilization, excellent compatibility, high transparency lacquers, and reduces coefficient of friction (COF). view less | |
| PAT-ADD SL 1120 | Patcham USA | PAT-ADD SL 1120 is a slip and leveling agent for use in solvent-borne coatings. PAT-ADD SL 1120 is mainly used in industrial coatings. PAT-ADD SL 1120 is extremely versatile in application, so efficient in various solventborne systems for optimizing slip,...view more PAT-ADD SL 1120 is a slip and leveling agent for use in solvent-borne coatings. PAT-ADD SL 1120 is mainly used in industrial coatings. PAT-ADD SL 1120 is extremely versatile in application, so efficient in various solventborne systems for optimizing slip, mar resistance and contributing to improved flow and leveling. Main benefits are: highly effective slip agent, defoaming, anti-blocking, mar resistance, excellent film transparency, and reduces coefficient of friction (COF). view less | |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...view more Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. view less | |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| High Slip, High Resistance Overprint Varnish Starting Formulation | BASF Dispersions & Resins | This formulation produces a high slip, high resistance overprint varnish. It is suitable for overprinting of playing cards, trading cards, and other applications requiring controlled COF and good resistance properties. | |
| TEGO® Rad 2550 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect. | Request Sample |
| EBECRYL® 1360 | Allnex | EBECRYL® 1360 is a silicone hexa-acrylate material which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by UV or EB. Cured films containing EBECRYL® 1360 will exhibit a smooth, tack free surface, wit...view more EBECRYL® 1360 is a silicone hexa-acrylate material which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by UV or EB. Cured films containing EBECRYL® 1360 will exhibit a smooth, tack free surface, with good blocking resistance. It is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, release coatings, and EB cure. view less | Request Sample |
| TEGO® Glide 110 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 110 is a highly effective slip additive with flow promotion. It is a polyether siloxane copolymer supplied as a clear liquid that becomes hazy and thickens at temperatures below 15°C. It returns to clear and pourable after warming. TEGO® Glide...view more TEGO® Glide 110 is a highly effective slip additive with flow promotion. It is a polyether siloxane copolymer supplied as a clear liquid that becomes hazy and thickens at temperatures below 15°C. It returns to clear and pourable after warming. TEGO® Glide 110 is universally applicable with good anti-crater effect. It also has good slip effect and is suitable for flow promotion. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. view less | Request Sample |
| PAT-ADD LE 1019 | Patcham USA | PAT-ADD LE 1019 is a highly concentrated, solvent-free surface modifier, showing a very wide compatibility range. The additive provides excellent slip and mar resistance properties and contributes to improved flow and levelling in solvent-based and solven...view more PAT-ADD LE 1019 is a highly concentrated, solvent-free surface modifier, showing a very wide compatibility range. The additive provides excellent slip and mar resistance properties and contributes to improved flow and levelling in solvent-based and solvent-free systems. Main benefits are: broad range compatibility, highly effective slip, leveling, and mar resistance additive, provides optimal flow and leveling, and soluble in water, methanol, iso-propanol, and xylene. Limited solubility in mineral spirits. view less | |
| PEL-SIL CL380 | Ele Corporation | PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coati...view more PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coatings, PEL-SIL CL380 can reduce coefficient of friction reduction without generating foams or lowering gloss. It may also be incorporated into polymer systems by virtue of its two primary hydroxyl in polyurethane systems. view less | |
| PEL-SIL CL340 | Ele Corporation | PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it prov...view more PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it provides mar resistance for coatings applications such as glossy printed materials. view less | |
| TEGO® Rad 2500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is ...view more TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is especially suitable for pigmented formulations. TEGO® Rad 2500 can be added to the coating as supplied or as a predilution either in the grind stage or during the let-down stage. Predilution in a suitable solvent simplifies dosage and incorporation of this product. view less | Request Sample |
| EBECRYL® 350 | Allnex | EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a s...view more EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings. view less | Request Sample |
| Siltech® C-20 | Siltech Corp. | Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less syste...view more Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low concentrations. The recommended concentration used is between-% weight percent based on total solids. It should be added during the final thinning step. Preliminary tests in laboratory or a small-scale production unit necessary to obtain optimum results. view less | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| TEGO® Rad 2300 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2300 is a radiation-curing substrate wetting, flow, and slip additive. It is a silicone polyether acrylate clear liquid which becomes hazy and thickens at temperatures below 15°C, but returns to clear and pourable after warming. TEGO® Rad 2300 i...view more TEGO® Rad 2300 is a radiation-curing substrate wetting, flow, and slip additive. It is a silicone polyether acrylate clear liquid which becomes hazy and thickens at temperatures below 15°C, but returns to clear and pourable after warming. TEGO® Rad 2300 is low foaming, universal, and radically crosslinkable. It improves mechanical resistance and substrate wetting. It can be used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2300. view less | Request Sample |
| Siltech® C-816 | Siltech Corp. | Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repellence to such coatings, as well as mar resistance and improved slip...view more Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repellence to such coatings, as well as mar resistance and improved slip. view less | |
| DOWSIL™ 401LS Additive | Univar Solutions | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | Request Sample |
| DOWSIL™ 402LS Additive | Univar Solutions | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | Request Sample |
| TEGO® Rad 2200 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2200 N is a clear to slightly hazy liquid radiation-curing substrate wetting, flow, glide, and slip additive. It is a silicone polyether acrylate that is radically crosslinkable and highly compatible. It is ideal for radiation-curing, pigmented,...view more TEGO® Rad 2200 N is a clear to slightly hazy liquid radiation-curing substrate wetting, flow, glide, and slip additive. It is a silicone polyether acrylate that is radically crosslinkable and highly compatible. It is ideal for radiation-curing, pigmented, and clear coat as well as aqueous UV systems. TEGO® Rad 2200 N can be used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2200 N. view less | Request Sample |
| PEL-SIL CL290 | Ele Corporation | PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip...view more PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. view less | |
| TEGO® Glide A 116 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide A 116 is a highly effective glide additive with superior scratch resistance. It is a clear liquid organo-modified polysiloxane that is excellent in combination with waxes and/or matting agents. TEGO® Glide A 116 has excellent slip properties i...view more TEGO® Glide A 116 is a highly effective glide additive with superior scratch resistance. It is a clear liquid organo-modified polysiloxane that is excellent in combination with waxes and/or matting agents. TEGO® Glide A 116 has excellent slip properties in pigmented, solventborne, and NC systems. It is used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. view less | Request Sample |
| TEGO® Glide 435 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 435 is a highly effective wetting, flow and glide additive with very low foaming. It is a polyether siloxane copolymer, clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. This does not affect the performance properties of the product. TEGO® Glide 435 has good slip...view more TEGO® Glide 435 is a highly effective wetting, flow and glide additive with very low foaming. It is a polyether siloxane copolymer, clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. This does not affect the performance properties of the product. TEGO® Glide 435 has good slip effect and substrate wetting without stablilizing foam in clear coat, pigmented, or radiation-curing formulations. view less | Request Sample |
| TEGO® Glide 410 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 410 highly effective glide and anti-crater additive with outstanding scratch resistance. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 410 has excellent slip and anti-crater effect. It is suitable for 2-pack 100%, clear coat, ...view more TEGO® Glide 410 highly effective glide and anti-crater additive with outstanding scratch resistance. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 410 has excellent slip and anti-crater effect. It is suitable for 2-pack 100%, clear coat, pigmented, and solventborne systems. TEGO® Glide 410 is used in the topcoat of lacquer coats. Addition of this product to the coating can be used as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. view less | Request Sample |
| XIAMETER® OFX-0190 Fluid | Univar Solutions | XIAMETER® OFX-0190 Fluid is a modified silicone, designed primarily to provide leveling, slip and mar resistance in water and solvent borne paints, inks and coatings. This additive also improves anti blocking properties, gloss and substrate wetting. | Request Sample |
| TEGO® Glide 130 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 130 is a highly compatible slip and flow additive. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 130 is universally applicable with good compatibility. It has good flow promotion and anti-crater effect. this product may be add...view more TEGO® Glide 130 is a highly compatible slip and flow additive. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 130 is universally applicable with good compatibility. It has good flow promotion and anti-crater effect. this product may be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Glide 130. view less | Request Sample |
| TEGO® Glide 440 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 440 is a highly effective glide and flow additive with excellent compatibility. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 440 is universally applicable with good anti-crater and slip effect. It is suitable for clear coat, ...view more TEGO® Glide 440 is a highly effective glide and flow additive with excellent compatibility. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 440 is universally applicable with good anti-crater and slip effect. It is suitable for clear coat, pigmented, and solventborne systems. It is clear soluble in ethanol, butyl acetate, and tripropylene glycol diacrylate (TPGDA). It is cloudy in water, but is still stable. This product's addition to the coating can b as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. view less | Request Sample |
| TEGO® Glide 450 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 450 is a highly effective glide and flow additive with excellent compatibility. It is a clear liquid polyether siloxane copolymer. It is suitable for clear coat, pigmented, and solventborne systems. TEGO® Glide 450 is recoatable and universally applicable with good anti-crater and slip...view more TEGO® Glide 450 is a highly effective glide and flow additive with excellent compatibility. It is a clear liquid polyether siloxane copolymer. It is suitable for clear coat, pigmented, and solventborne systems. TEGO® Glide 450 is recoatable and universally applicable with good anti-crater and slip effect. It also has good flow promotion and is soluble in ethanol, butyl acetate, and tripropylene glycol diacrylate (TPGDA). Addition of the product to the coating, can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. view less | Request Sample |
| Silmer® ACR Di-50 | Siltech Corp. | Silmer® ACR Di-50 is a high molecular weight silicone acrylate fluid. It is used to give permanent slip and mar resistance to UV-curable coatings systems. Silmer®ACR Di-50 is used to improve surface smoothness and scratch resistance in UV-curable systems....view more Silmer® ACR Di-50 is a high molecular weight silicone acrylate fluid. It is used to give permanent slip and mar resistance to UV-curable coatings systems. Silmer®ACR Di-50 is used to improve surface smoothness and scratch resistance in UV-curable systems. The acrylate functionality gives a permanent binding into the matrix of the coating. It is a 100% active silicone that is soluble in aliphatic and aromatic solvents. view less | |
| TEGO® Glide 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 100 is highly compatible flow and glide additive with good recoatability. It is a clear liquid polyether siloxane copolymer. It is suitable for clear coats, radiation-curing, pigmented, solventborne systems. TEGO® Glide 100 is highly suitable for flow promotion and also has an snit-crater and slip...view more TEGO® Glide 100 is highly compatible flow and glide additive with good recoatability. It is a clear liquid polyether siloxane copolymer. It is suitable for clear coats, radiation-curing, pigmented, solventborne systems. TEGO® Glide 100 is highly suitable for flow promotion and also has an snit-crater and slip effect. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. In alkaline or acidic media the long-term effectiveness of the product should be checked. view less | Request Sample |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less | |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip...view more Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. view less | |
| Siltech® C-172 | Siltech Corp. | Siltech® C-172 is a 100% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-172 is designed for use in both solvent based and solvent free systems. It increases surface slip, improves leveling, gloss, substrate wetting & gives anti-blocking benefits. It also prevents formation of Bernard cells and reduces the surface tension. It provides benefits that are not obtainable with conventional silicone oil additives...view more Siltech® C-172 is a 100% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-172 is designed for use in both solvent based and solvent free systems. It increases surface slip, improves leveling, gloss, substrate wetting & gives anti-blocking benefits. It also prevents formation of Bernard cells and reduces the surface tension. It provides benefits that are not obtainable with conventional silicone oil additives. view less | |
| DOWSIL™ 11 Additive | Univar Solutions | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | Request Sample |
| Siltech® C-608 | Siltech Corp. | Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary f...view more Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary function is to improve flow, leveling and release. It is recommended that Siltech® C-608 be used between 0.05-0.5% weight percent based on the total formulation. It can be added at any stage during the process. view less | |
| PAT-ADD LE 1040 | Patcham USA | PAT-ADD LE 1040 is a levelling agent for use in waterborne and polar solvent-borne coatings. PAT-ADD LE 1040 is mainly used in industrial coatings. PAT-ADD LE 1040 enhances flow and levelling and provides slip and mar resistance optimisation. Main benefit...view more PAT-ADD LE 1040 is a levelling agent for use in waterborne and polar solvent-borne coatings. PAT-ADD LE 1040 is mainly used in industrial coatings. PAT-ADD LE 1040 enhances flow and levelling and provides slip and mar resistance optimisation. Main benefits are: first choice for stoving systems, highly effective leveling additive, wide compatibility, reduces coefficient of friction (COF), reduces risk of pigment float, and effective in epoxies, acrylic and polester melamine resin based industrial paints. view less | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. I...view more AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. view less | |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de...view more AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. view less | |
| AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat ...view more AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. view less | |
| DOWSIL™ 57 Additive | Univar Solutions | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | Request Sample |
| S-400-Q (EBS Wax) | Shamrock Technologies, Inc. | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| AQUACER® 593 | BYK | AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less | |
| SST®-3P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3P is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3P is recommended for use in offset and liquid inks. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| AERODISP® W 7520 N | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adhesive promotion, anti-slip...view more AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less | Request Sample |
| AERODISP® W 7520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabilization for emulsions, adhesive promotion, anti-slip...view more AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less | Request Sample |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-H is polyethylene wax with a DSC peak melt around 100°C and corresponding low onset of melting. S-379-H is recommended for liquid and paste inks. | |
| SST®-2D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in offset and liquid inks. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| SST®-4P (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4P is a low MW PTFE powder (white) with a particle size mean value of 3.0 µm. SST®-4P is recommended in offset and liquid inks. | |
| SST®-4MG (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4MG is a low MW PTFE powder (white) with a particle size mean value of 2.5 µm. SST®-4MG has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-4MG is recommended for use in offset inks. | |
| TEGO® Glide ZG 400 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide ZG 400 is a versatile glide and flow additive with broad compatibility. It is a clear to slightly hazy liquid polyether siloxane copolymer. TEGO® Glide ZG 400 is universally and highly compatible for clear coat, pigmented, and solventborne sys...view more TEGO® Glide ZG 400 is a versatile glide and flow additive with broad compatibility. It is a clear to slightly hazy liquid polyether siloxane copolymer. TEGO® Glide ZG 400 is universally and highly compatible for clear coat, pigmented, and solventborne systems. It is suitable for the topcoat of lacquer coats. Addition to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide ZG 400. view less | Request Sample |
| TEGO® Glide 432 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 432 is a highly effective flow and glide additive with superior substrate wetting properties in UV systems. It is a polyether siloxane copolymer clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and...view more TEGO® Glide 432 is a highly effective flow and glide additive with superior substrate wetting properties in UV systems. It is a polyether siloxane copolymer clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. TEGO® Glide 432 is suitable for clear coat, pigmented, solventborne, and radiation-curing formulations. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. view less | Request Sample |
| TEGO® Flow ATF 2 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow ATF 2 shows highly effective anti-crater properties for solventborne coatings. It ensures wetting even on insufficiently cleaned or contaminated substrates. | Request Sample |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based liquid and UV inks. | |
| SPP-10 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-10 is an isotactic polypropylene with a mean particle size of 15 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-300 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-300 is an isotactic polypropylene with a mean particle size of 290 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| PEL-SIL CL320 | Ele Corporation | PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl funct...view more PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl functional. It is useful for imparting silicone characteristics itno synthetic leather top coat formulations. view less | |
| PEL-SIL CL330 | Ele Corporation | PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-...view more PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-borne paints and coatings in automotive, transportation, construction and aerospace industries. It can also be used in solvent-based and high solid/UV curable coatings as leveling agent. For polyurethane foam coatings, PEL-SIL CL330 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes. view less | |
| PEL-SIL CL310 | Ele Corporation | PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative ...view more PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative coatings. PEL-SIL CL310 is compatible with solvent-borne coatings and inks. It provides good low and leveling performance, mar resistance, antiblocking and releasing properties. view less | |
| S-400-N1 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is used in both the ink and coating industry. | |
| S-400-N5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies, Inc. | S-400-SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, water-based, solvent-based and UV systems. | |
| PAT-ADD LE 1020 | Patcham USA | PAT-ADD LE 1020 is a levelling and substrate wetting agent for use in solvent-borne coatings PAT-ADD LE 1020 is very suitable for use in clear coatings. PAT-ADD LE 1020 enhances flow and levelling and provides gloss optimisation. Main benefits are: highly...view more PAT-ADD LE 1020 is a levelling and substrate wetting agent for use in solvent-borne coatings PAT-ADD LE 1020 is very suitable for use in clear coatings. PAT-ADD LE 1020 enhances flow and levelling and provides gloss optimisation. Main benefits are: highly effective leveling and substrate wetting additive, wide range compatibility, reduce coefficent of friction (COF), reduce risk of pigment float, and effective in epoxies, PUR, acrylics, polyester industrial paints and inks. view less | |
| PAT-ADD LE 1030 | Patcham USA | PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first cho...view more PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first choice for PUR systems, excellent substrate wetting and air release, effective leveling agent for water borne and polar solvent systems, wide range of compatibilty, strong surface tension reduction, reduces risk of pigment float, and effective in PUR, acrylic and polyester melamine industrial paints. view less | |
| BYK®-019 FOR INKS | BYK | Silicone defoamers for aqueous printing inks and overprint varnishes. Solution of a polyether modified polydimethylsiloxane. | |
| TEGO® Glide B 1484 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems wit...view more TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems with deaerating properties. It also has good orientation of matting agents. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide B 1484. view less | Request Sample |
| SPP-40 (Polypropylene Powder) | Shamrock Technologies, Inc. | SPP-40 is an isotactic polypropylene with a mean particle size of 40 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. |
