| DeCORE AFCI-45 | DeFOREST Enterprises, Inc. | DeCORE AFCI-45 is an amine free, low foaming, water soluble, biodegradable corrosion inhibitor. Protects a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. It is free of pho...view more DeCORE AFCI-45 is an amine free, low foaming, water soluble, biodegradable corrosion inhibitor. Protects a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. It is free of phosphorous, boron, nitrites, azoles and is non-phenolic. Suggested for use in formulations having a pH > 7 such as synthetic coolants, cleaners, and aerosol products. Prevents flash rust in mildly acidic formulations. May also be used as a hydrotrope in alkaline systems. view less | |
| DeCORE APCI-95 MOD | DeFOREST Enterprises, Inc. | DeCORE APCI-95 MOD is a water soluble corrosion inhibitor based on amine carboxylate chemistry. Effective on ferrrous and non-ferrrous metals including brass and copper. For use in aqueous systems having a pH > 7 such as coolants, metal cleaners, paints...view more DeCORE APCI-95 MOD is a water soluble corrosion inhibitor based on amine carboxylate chemistry. Effective on ferrrous and non-ferrrous metals including brass and copper. For use in aqueous systems having a pH > 7 such as coolants, metal cleaners, paints & coatings and water based lubricants. view less | |
| DeCORE IDMT-100 | DeFOREST Enterprises, Inc. | DeCORE IDMT-100 is a 100% active, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25-0.5%) on a variety of metals including steel, aluminum, copper, brass, and galvanized. Suggested for use in metal cleaners, metalworking fluids, ...view more DeCORE IDMT-100 is a 100% active, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25-0.5%) on a variety of metals including steel, aluminum, copper, brass, and galvanized. Suggested for use in metal cleaners, metalworking fluids, and other applications where corrosion inbibition is desired. view less | |
| DeCORE IMT-100LF | DeFOREST Enterprises, Inc. | DeCORE IMT-100LF is a low foaming, 100% active, mixed-amine carboxylate for use in moderately alkaline systems. Effective at low concentrations in both ferrous and non-ferrous applications. Effective in high chloride environments and at elevated temperat...view more DeCORE IMT-100LF is a low foaming, 100% active, mixed-amine carboxylate for use in moderately alkaline systems. Effective at low concentrations in both ferrous and non-ferrous applications. Effective in high chloride environments and at elevated temperature. DeCORE IMT-100LF also contributes lubricating, wetting, and spreading properties. Does not contain nitrites, chromates, phosphates, borates, or azole chemistries. view less | |
| DeIONIC LF-EP Series | DeFOREST Enterprises, Inc. | Low foaming, alkoxylated alcohols with cloud points ranging from 15°C – 61°C. Excellent stability in alkaline and acid systems including on dry caustic and in the presence of electrolytes. Highly effective detergents and wetting agents when applied at tem...view more Low foaming, alkoxylated alcohols with cloud points ranging from 15°C – 61°C. Excellent stability in alkaline and acid systems including on dry caustic and in the presence of electrolytes. Highly effective detergents and wetting agents when applied at temperatures near their cloud points. view less | |
| DePHOS 4AL | DeFOREST Enterprises, Inc. | DePHOS 4AL is a low to moderate foaming, multi-functional phosphate ester highly recommended for aluminum machining applications. | |
| DePHOS 8028 | DeFOREST Enterprises, Inc. | DePHOS 8028 is a low-to-moderate foaming, multifunctional, 80% active, phosphate ester-potassium salt. Exhibits multi-metal corrosion inhibition, lubricity, detergency, wetting, hydrotroping, and scale inhibition. Stable in mild acid and alkaline systems....view more DePHOS 8028 is a low-to-moderate foaming, multifunctional, 80% active, phosphate ester-potassium salt. Exhibits multi-metal corrosion inhibition, lubricity, detergency, wetting, hydrotroping, and scale inhibition. Stable in mild acid and alkaline systems. Suggested for use in industrial applications including cleaners, metalworking formulations, and for oilfield applications. view less | |
| DePHOS H-66-872 | DeFOREST Enterprises, Inc. | DePHOS H-66-872 is a 50% active phosphate ester-potassium salt. Excellent low foam hydrotrope for nonionics and anionics in acid and alkaline systems. This economical, biodegradable phosphate ester has been the formulators “go-to” hydrotrope in the indust...view more DePHOS H-66-872 is a 50% active phosphate ester-potassium salt. Excellent low foam hydrotrope for nonionics and anionics in acid and alkaline systems. This economical, biodegradable phosphate ester has been the formulators “go-to” hydrotrope in the industry for years. view less | |
| DePHOS HP-739 | DeFOREST Enterprises, Inc. | DePHOS HP-739 is recommended as an EP addtive due to the high phosphorous content. It's oil soluble and low foaming until nuetralized at which point it becomes water soluble and high foaming. It's an excellent lubricant, wetting agent, and emulsifier in n...view more DePHOS HP-739 is recommended as an EP addtive due to the high phosphorous content. It's oil soluble and low foaming until nuetralized at which point it becomes water soluble and high foaming. It's an excellent lubricant, wetting agent, and emulsifier in neutralized form. view less | |
| DePHOS P-6LF-AS | DeFOREST Enterprises, Inc. | DePHOS P-6LF-AS is a very low foam, water-soluble phosphate ester with good lubricant properties and a very effective hydrotrope in highly alkaline systems. Excellent acid & alkaline stability. | |
| DeTERIC ODP-LF | DeFOREST Enterprises, Inc. | DeTERIC ODP-LF, CAS #94441-92-6, sodium octyliminodipropionate is a very low foaming amphoteric with excellent alkaline & acid stability. Suggested for use as a highly effective hydrotrope in low foaming alkaline or acid cleaners. Exhibits corrosion inhib...view more DeTERIC ODP-LF, CAS #94441-92-6, sodium octyliminodipropionate is a very low foaming amphoteric with excellent alkaline & acid stability. Suggested for use as a highly effective hydrotrope in low foaming alkaline or acid cleaners. Exhibits corrosion inhibition properties. Approved for use as inert in non-food pesticide formulations. Zero VOCs (ASTM E-1868-10/SCAQMD Rule 1144). view less | |
| DeTROPE CA-100 | DeFOREST Enterprises, Inc. | DeTROPE CA-100 is a 100% active, low foaming, mixed-amine carboxylate with multifunctional properties. It's an excellent corrosion inhibitor for aluminum and is a highly effective hydrotrope for alkaline systems. A 90% active version is available for ea...view more DeTROPE CA-100 is a 100% active, low foaming, mixed-amine carboxylate with multifunctional properties. It's an excellent corrosion inhibitor for aluminum and is a highly effective hydrotrope for alkaline systems. A 90% active version is available for easy handling. view less | |
| DeTROPE SA-45 | DeFOREST Enterprises, Inc. | DeTROPE SA-45 is a very low foaming, 45% active sodium alkanoate with multifunctional properties. An effective solubilizer and hydrotrope in alkaline systems also contributing corrosion protection on steel as well as wetting. Recommend for use in a wide...view more DeTROPE SA-45 is a very low foaming, 45% active sodium alkanoate with multifunctional properties. An effective solubilizer and hydrotrope in alkaline systems also contributing corrosion protection on steel as well as wetting. Recommend for use in a wide variety of industrial and metal cleaners and degreasers. It's also chlorine stable. view less | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...view more RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. view less |  |
| SMARTPAVE / SMARTPAVE PLUS ASPHALT RHEOMETER | Anton Paar Viscosity & Rheology | The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-b...view more The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315. The SmartPave rheometer takes asphalt rheology to previously unattained levels of accuracy, comfort, and ease of use. view less |  |
