| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...view more The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. view less | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...view more The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. view less | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...view more Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. view less | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...view more The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. view less | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| CHEMAL EM-500 | PCC Chemax, Inc. | Chemal EM-500 is an excellent emulsifier for mineral oil based systems. This product provides good blooming qualities which produce a highly stable oil in water emulsion. | |
| CHEMAX EM-1169 | PCC Chemax, Inc. | Chemax EM-1169 is recommended as a low foaming, emulsifier and lubricant additive for the production of stable emulsions of vegetables oils, especially for the application of soybean oil emulsification. | |
| CHEMAX EM-481 | PCC Chemax, Inc. | Chemax EM-481 is a versatile emulsifier for use with canola, paraffinic, naphthenic and safflower oils. The resultant emulsions exhibit good stability and can be used in fomulating water based coolants. | |
| CHEMAX EMX-1016 | PCC Chemax, Inc. | Chemax EMX-1016 is an effective d-limonene emulsifier in the production of stable, opalescent emulsions. In addition to being an effective emulsifier, this material also acts to reduce the surface tension of cleaning solutions and provides for increased d...view more Chemax EMX-1016 is an effective d-limonene emulsifier in the production of stable, opalescent emulsions. In addition to being an effective emulsifier, this material also acts to reduce the surface tension of cleaning solutions and provides for increased detergency. view less | |
| CHEMAX EMX-1032 | PCC Chemax, Inc. | Chemax EMX-1032 provides excellent emulsification and coupling activity with a variety of naturally occurring and synthetically derived oils and fatty acids. This product is compatible with extreme pressure additives, corrosion inhibitors, biocides and ma...view more Chemax EMX-1032 provides excellent emulsification and coupling activity with a variety of naturally occurring and synthetically derived oils and fatty acids. This product is compatible with extreme pressure additives, corrosion inhibitors, biocides and many other additives used in the metalworking, metal cleaning, textile and industrial cleaning industries. view less | |
| CHEMAX EMX-1033 | PCC Chemax, Inc. | Chemax EMX-1033 is used in the formulating of d-limonene emulsion concentrates for cleaning and degreasing of metals, textiles and hard surfaces. | |
| CHEMAX EMX-1154 | PCC Chemax, Inc. | Chemax EMX-1154 is recommended as a low foaming, self-emulsifying additive for the production of stable emulsions of vegetable oils, especially for the application of canola oil emulsification. | |
| CHEMAX EMX-1155 | PCC Chemax, Inc. | Chemax EMX-1155 is designed for use in metal forming operations from stamping to deep draw applications. This material may comprise from 20–25% of a typical forming compound which would then be diluted to 5–50% based on severity of the operation. | |
| CHEMAX EMX-VO-100 | PCC Chemax, Inc. | Self emulsifying ester | |
| CHEMAX NDO-250 | PCC Chemax, Inc. | Chemax NDO-250 is a synthetic polymerized ester designed to boost lubricity in severe metalworking applications. | |
| CHEMAX NDO-300 | PCC Chemax, Inc. | Chemax NDO-300 is a polymerized water soluble specialty ester. | |
| CHEMAX NDO-350 | PCC Chemax, Inc. | Chemax NDO-350 is a polymerized water dilutable specialty ester. | |
| CHEMAX WHA-100 | PCC Chemax, Inc. | Chemax WHA-100 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-100 prevents reactions with water hardness ions without scavenging metal ions from work pie...view more Chemax WHA-100 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-100 prevents reactions with water hardness ions without scavenging metal ions from work pieces while increasing the level of hydrodynamic lubrication in metalworking coolants. view less | |
| CHEMAX WHA-200 | PCC Chemax, Inc. | Chemax WHA-200 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-200 prevents reactions with water hardness ions without scavenging metal ions from work pie...view more Chemax WHA-200 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-200 prevents reactions with water hardness ions without scavenging metal ions from work pieces while increasing the level of hydrodynamic lubrication in metalworking coolants. view less | |
| CHEMFAC NA-350 | PCC Chemax, Inc. | Chemfac NA-350 is used in metalworking applications to impart emulsification, lubricity and extreme pressure attributes. | |
| CHEMFAC NB-126 | PCC Chemax, Inc. | Chemfac NB-126 offers EP, emulsification and wetting properties to metal working fluids and cleaners. | |
| CHEMFAC NB-159 | PCC Chemax, Inc. | Chemfac NB-159 is used to enhance lubricity and emulsification attributes in metalworking formulations. This product also provides mild extreme pressure properties to these same systems. Detergency and wetting properties of hard surface cleaners are also ...view more Chemfac NB-159 is used to enhance lubricity and emulsification attributes in metalworking formulations. This product also provides mild extreme pressure properties to these same systems. Detergency and wetting properties of hard surface cleaners are also improved by the addition of this product. view less | |
| CHEMFAC NC-096 | PCC Chemax, Inc. | Chemfac NC-096 functions as a lubricant and EP agent in metalworking applications and cutting fluids. This material also functions as an anti-redeposition agent and dispersant in textile applications. | |
| CHEMFAC PA-080 | PCC Chemax, Inc. | Chemfac PA-080 is an oil soluble free acid phosphate ester which offers good detergency and hydrotroping in alkaline cleaner formulations for textile and I&I applications. The solubility characteristics and EP properties make it an ideal choice for metalw...view more Chemfac PA-080 is an oil soluble free acid phosphate ester which offers good detergency and hydrotroping in alkaline cleaner formulations for textile and I&I applications. The solubility characteristics and EP properties make it an ideal choice for metalworking fluids. view less | |
| CHEMFAC PA-1315 | PCC Chemax, Inc. | Chemfac PA-1315 is a free acid phosphate ester made from a branched alcohol. This product exhibits good lubricity and EP properties for metalworking formulations. It also contributes wetting and detergency characteristics for metal cleaning applications. | |
| CHEMFAC PA-800 | PCC Chemax, Inc. | Chemfac PA-800 is a free acid phosphate ester made from a linear alcohol. This material has good lubricity and emulsification properties in addition to EP. This chain length provides wetting and detergency for cleaning formulations. | |
| CHEMFAC PB-133 | PCC Chemax, Inc. | Chemfac PB-133 is an aliphatic based phosphate ester. It offers excellent hard surface wetting, lubricity and EP properties and is primarily recommended for straight and soluble oil and semisynthetic formulations. | |
| CHEMFAC PB-136 | PCC Chemax, Inc. | Chemfac PB-136 is a free acid phosphate ester which provides wetting, detergency and hydrotroping qualities to cleaning formulations. This products also exhibits mild EP properties, lubricity and emulsification attributes in metalworking formulations. | |
| CHEMFAC PB-184 | PCC Chemax, Inc. | Chemfac PB-184 is a free acid phosphate ester which provides lubricity, emulsification and EP properties to metalworking formulations. When neutralized, this material provides mild wetting and detergency properties for hard surface cleaning. | |
| CHEMFAC PB-264 | PCC Chemax, Inc. | Chemfac PB-264 is a free acid phosphate ester which exhibits lubricity and emulsification properties in metalworking fluids. In addition to these primary attributes, this material also provides some corrosion inhibition properties and wetting and detergen...view more Chemfac PB-264 is a free acid phosphate ester which exhibits lubricity and emulsification properties in metalworking fluids. In addition to these primary attributes, this material also provides some corrosion inhibition properties and wetting and detergency characteristics. view less | |
| CHEMFAC PC-006 | PCC Chemax, Inc. | Chemfac PC-006 is phosphate ester made from an ethoxylated aromatic. This ester has a a wide range of functionality including hydrotroping capability, EP properties, wetting and detergency characteristics and lubricity. | |
| CHEMFAC PC-099 | PCC Chemax, Inc. | Chemfac PC-099 is a free acid phosphate ester which is used for adding hydrotroping and detergency properties in water based cleaners for I&I, textiles and metals. This material also offers EP properties and lubricity to synthetic and semi-synthetic metal...view more Chemfac PC-099 is a free acid phosphate ester which is used for adding hydrotroping and detergency properties in water based cleaners for I&I, textiles and metals. This material also offers EP properties and lubricity to synthetic and semi-synthetic metalworking formulations. view less | |
| CHEMFAC PC-188 | PCC Chemax, Inc. | Chemfac PC-188 is a free acid phosphate ester which provides lubricity and emulsification properties to metalworking and textile formulations. This material provides mild EP properties to metalworking fluids and mild wetting and detergency for hard surfac...view more Chemfac PC-188 is a free acid phosphate ester which provides lubricity and emulsification properties to metalworking and textile formulations. This material provides mild EP properties to metalworking fluids and mild wetting and detergency for hard surface cleaning. view less | |
| CHEMFAC PF-636 | PCC Chemax, Inc. | Chemfac PF-636 is a free acid phosphate ester made from a glycol source. This material works exceptionally well in synthetic and semi-synthetic fluids due to good EP and lubricity properties. This ester also has good alkaline compatibility and wetting and...view more Chemfac PF-636 is a free acid phosphate ester made from a glycol source. This material works exceptionally well in synthetic and semi-synthetic fluids due to good EP and lubricity properties. This ester also has good alkaline compatibility and wetting and detergency attributes. view less | |
| MAXBASE 115 | PCC Chemax, Inc. | MaxBase 155 is an emulsifier base made from natural sulfonate that is designed for use in a variety of naphthenic base oil. | |
| MAXCOR RP-4405 | PCC Chemax, Inc. | MaxCor RP-4405 is a biodegradable, ashless rust preventative for industrial and automotive lubricants, including greases. | |
| MAXCOR RP-5575 | PCC Chemax, Inc. | MaxCor RP-5575 is a liquid, wax containing rust preventative formulated for rust preventative fluids for use in harsh environments, such as salt fog exposure. | |
| MAXCOR RP-6655 | PCC Chemax, Inc. | MaxCor RP-6655 is a liquid, wax containing rust preventative formulated for rust preventative fluids for use in harsh environments, such as salt fog exposure. | |
| MAXHIB AA-0223 | PCC Chemax, Inc. | Maxhib AA-0223 protects multiple aluminum alloys from staining in traditional metalworking fluids. This material is both oil and solvent soluble and forms a stable dispersion at aqueous dilution. | |
| MAXHIB AB-400 | PCC Chemax, Inc. | Maxhib AB-400 is a borate containing corrosion inhibitor for use in metalworking fluids and industrial cleaners. As well as being hard water stable and low foaming, Maxhib AB-400 is extremely biostable. | |
| MAXHIB ABC-5050 | PCC Chemax, Inc. | Maxhib ABC-5050 is formulated to offer a dual purpose corrosion inhibitor for the formulation of cutting fluids, drawing compounds and industrial cleaners. | |
| MAXHIB AC-5000 | PCC Chemax, Inc. | Maxhib AC-5000 is an amine carboxylate based corrosion inhibitor designed for use in metalworking fluids and industrial cleaners. The solubility in water and glycols makes it a product of choice when formulating synthetic cutting fluids. | |
| MAXHIB AC-5080 | PCC Chemax, Inc. | Maxhib AC-5080 is designed for use in cutting fluids, drawing compounds and industrial cleaners. This inhibitor is safe on galvanized metal, aluminum and copper. The solubility of Maxhib AC-5080 in water and glycols makes it a product of choice when formu...view more Maxhib AC-5080 is designed for use in cutting fluids, drawing compounds and industrial cleaners. This inhibitor is safe on galvanized metal, aluminum and copper. The solubility of Maxhib AC-5080 in water and glycols makes it a product of choice when formulating synthetic cutting fluids. view less | |
| MAXHIB AC-5144 | PCC Chemax, Inc. | Maxhib AC-5144 is designed for use in cutting fluids, drawing compounds and industrial cleaners. Maxhib AC-5144 is safe on galvanized steel, aluminum and copper. The solubility of Maxhib AC-5144 in water and glycols makes it a product of choice when formu...view more Maxhib AC-5144 is designed for use in cutting fluids, drawing compounds and industrial cleaners. Maxhib AC-5144 is safe on galvanized steel, aluminum and copper. The solubility of Maxhib AC-5144 in water and glycols makes it a product of choice when formulating synthetic cutting fluids. view less | |
| MAXHIB AC-5480 | PCC Chemax, Inc. | Maxhib AC-5480 is an amine carboxylate based corrosion inhibitor designed for use in metalworking fluids and industrial cleaners. The solubility in water and glycols makes it a product of choice when formulating synthetic cutting fluids. | |
| MAXHIB AC-790 | PCC Chemax, Inc. | Maxhib AC-790 is recommended as a replacement for sodium nitrite as a corrosion inhibitor in synthetic and water emulsifiable cutting fluids and drawing compounds. Maxhib AC-790 is compatible with emulsifiers, surfactants, chemical and E.P. lubricity addi...view more Maxhib AC-790 is recommended as a replacement for sodium nitrite as a corrosion inhibitor in synthetic and water emulsifiable cutting fluids and drawing compounds. Maxhib AC-790 is compatible with emulsifiers, surfactants, chemical and E.P. lubricity additives and other corrosion inhibitors. view less | |
| MAXHIB AC-8150 | PCC Chemax, Inc. | Maxhib AC-8150 is recommended for use as a corrosion inhibitor in cutting fluids, drawing compounds and industrial cleaners. Maxhib AC-8150 is very effective in alkaline cleaners and rinse solutions where residual protection is required. | |
| MAXHIB OA-3090 | PCC Chemax, Inc. | Maxhib OA-3090 is recommended to replace sodium nitrite as the corrosion inhibitor when formulating cutting fluids, drawing compounds and industrial cleaners. Maxhib OA-3090 is especially effective in preventing vapor phase corrosion and protecting non-fe...view more Maxhib OA-3090 is recommended to replace sodium nitrite as the corrosion inhibitor when formulating cutting fluids, drawing compounds and industrial cleaners. Maxhib OA-3090 is especially effective in preventing vapor phase corrosion and protecting non-ferrous metals. view less | |
| MAXHIB OS-4300 | PCC Chemax, Inc. | Maxhib OS-4300 is a corrosion inhibiting additive that when diluted with oil, kerosene or mineral spirits, is recommended as a rust inhibitor in an acid atmosphere. Maxhib OS-4300 may be used as a corrosion inhibitor additive for the preparation of metalw...view more Maxhib OS-4300 is a corrosion inhibiting additive that when diluted with oil, kerosene or mineral spirits, is recommended as a rust inhibitor in an acid atmosphere. Maxhib OS-4300 may be used as a corrosion inhibitor additive for the preparation of metalworking products, oil and solvent based corrosion preventives and slushing oils. view less | |
| MAXHIB OS-4401 | PCC Chemax, Inc. | Maxhib OS-4401 is an oil soluble inhibitor that, when diluted with oil, kerosene or mineral spirits is a general purpose rust inhibitor. It may be used in the preparation of metalworking and metal cleaning materials, solvent and water emulsifiable corrosi...view more Maxhib OS-4401 is an oil soluble inhibitor that, when diluted with oil, kerosene or mineral spirits is a general purpose rust inhibitor. It may be used in the preparation of metalworking and metal cleaning materials, solvent and water emulsifiable corrosion treatments and slushing oils. view less | |
| MAXHIB PT-10T | PCC Chemax, Inc. | Maxhib PT-10T is a low foaming, water soluble corrosion inhibitor which provides excellent inhibiting properties for ferrous, non-ferrous and aluminum surfaces when used alone or in combination with synthetic lubricant components such as functional fluids...view more Maxhib PT-10T is a low foaming, water soluble corrosion inhibitor which provides excellent inhibiting properties for ferrous, non-ferrous and aluminum surfaces when used alone or in combination with synthetic lubricant components such as functional fluids, block polymers, low foam surfactants, sulfated esters, fatty acid soaps, etc. Maxhib PT-10T contains phosphorous and adds extreme pressure properties to lubricant formulations. view less | |
| MAXHIB ST-2220 | PCC Chemax, Inc. | Maxhib ST-2220 is a balanced blend of powdered ingredients designed to replace sodium nitrite in industrial cleaners. Its physical form and alkaline compatibility make it an ideal choice for use in powdered cleaner formulations. | |
| MAXLUBE 155 | PCC Chemax, Inc. | Maxlube 155 is a nonionic lubricant that is free of Sulfur, Chlorine and Phosphorus and will greatly improve your aluminum and ferrous coolants. | |
| MAXLUBE 200 | PCC Chemax, Inc. | Maxlube 200 provides excellent lubricity at low use levels in oil based systems where it imparts antiwear properties. This product is also recommended for ashless antiwear applications including hydraulic fluids and gear oils. | |
| MAXLUBE 405 | PCC Chemax, Inc. | Maxlube 405 is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405 is safe on all metals and provides excellent lubricity at l...view more Maxlube 405 is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405 is safe on all metals and provides excellent lubricity at low concentrations in water. Maxlube 405 exhibits good anti-wear and extreme pressure properties. view less | |
| MAXLUBE 405C | PCC Chemax, Inc. | Maxlube 405C is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405C is safe on all metals and provides excellent lubricity at...view more Maxlube 405C is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405C is safe on all metals and provides excellent lubricity at low concentrations in water. Maxlube 405C exhibits good anti-wear and extreme pressure properties. view less | |
| MAXLUBE 510 | PCC Chemax, Inc. | Maxlube 510 is a water soluble lubricant additive. It was developed to enhance the lubrication characteristics of metalworking and metal forming products. Due to its high viscosity and aqueous solubility, it is ideally suited for use in synthetic and semi...view more Maxlube 510 is a water soluble lubricant additive. It was developed to enhance the lubrication characteristics of metalworking and metal forming products. Due to its high viscosity and aqueous solubility, it is ideally suited for use in synthetic and semi-synthetic coolants to increase dynamic lubricity. view less | |
| MAXLUBE 510/60 | PCC Chemax, Inc. | Maxlube 510/60 is high molecular weight alkoxylate which provides excellent lubricity attributes in metalworking and textile applications. This product is recommended for use in heavy duty grinding coolants and light duty machining coolants as a hydrodyna...view more Maxlube 510/60 is high molecular weight alkoxylate which provides excellent lubricity attributes in metalworking and textile applications. This product is recommended for use in heavy duty grinding coolants and light duty machining coolants as a hydrodynamic lubricant for aluminum and ferrous alloys. view less | |
| MAXLUBE MV | PCC Chemax, Inc. | Maxlube MV is useful as a boundary lubricant in light duty, low viscosity oil based lubricants for soluble and semi-synthetic water based coolants. This product is also an excellent stand alone lubricant for high speed bearings. | |
| MAXLUBE RO-100 | PCC Chemax, Inc. | Maxlube RO-100 is a vegetable based polymerized branched chained ester designed to boost performance and enhance finish in severe metalworking applications, especially aluminum applications and drawing and stamping. | |
| SORBAX HO-50 | PCC Chemax, Inc. | Sorbax HO-50 is a PEG-50 sorbitol ester which produces exceptionally stable oil-in-water emulsions. The additional lubricity attributes are also useful in the formulating of textile and metalworking fluids. | |
| Attrition Mill | Munson Machinery Co., Inc. | Attrition Mill produces particles within a relatively narrow particle size spectrum, from granular (10 to 200 mesh). It is employed primarily for reduction of fibrous materials, but is also suitable for friable products. It is available in three sizes wit...view more Attrition Mill produces particles within a relatively narrow particle size spectrum, from granular (10 to 200 mesh). It is employed primarily for reduction of fibrous materials, but is also suitable for friable products. It is available in three sizes with single- or dual (counter-rotating) powered discs, and extensive selection of plate designs for optimum performance. In addition to general process applications, Munson Attrition Mills are utilized for conditioning of materials prior to packaging. view less |  |
| Centrifugal Impact Mills | Munson Machinery Co., Inc. | Centrifugal Impact Mill ("CIM" or "Pin Mill") provides a simple, inexpensive means of grinding, sizing, de-agglomerating and homogenizing material, and can be employed as an effective infestation destroyer. It yields particle sizes down to 325 mesh and pr...view more Centrifugal Impact Mill ("CIM" or "Pin Mill") provides a simple, inexpensive means of grinding, sizing, de-agglomerating and homogenizing material, and can be employed as an effective infestation destroyer. It yields particle sizes down to 325 mesh and primarily used for friable materials. Available in #304 stainless steel, sanitary, abrasive resistant and standard carbon steel design, Centrifugal Impact Mill operates without screens, hammers, knives or rolls. view less |  |
| CX Heavy Duty Cutter | Munson Machinery Co., Inc. | CX Heavy Duty Cutter is a single-rotor high torque cutter/hog with a positive, high profile raking action (unlike a shredder) for primary size reduction of large, bulky materials that typically would not fit into an SCC screen classifying cutter and/or re...view more CX Heavy Duty Cutter is a single-rotor high torque cutter/hog with a positive, high profile raking action (unlike a shredder) for primary size reduction of large, bulky materials that typically would not fit into an SCC screen classifying cutter and/or require greater torque than other cutters provide. The CX Heavy Duty Cutter delivers high horsepower at low speeds to produce tremendous torque for seemingly effortless reduction of high density, high tensile bulk materials up to 36" in size. view less |  |
| Cylindrical Plow Blenders | Munson Machinery Co., Inc. | Munson Cylindrical Plow Blenders consist of a cylindrical vessel and a mixing shaft that rotates about 4-times faster. The vessel is typically filled to 60 percent of capacity that, together with fast rotation of the mixing shaft, serves to fluidize the m...view more Munson Cylindrical Plow Blenders consist of a cylindrical vessel and a mixing shaft that rotates about 4-times faster. The vessel is typically filled to 60 percent of capacity that, together with fast rotation of the mixing shaft, serves to fluidize the material and fill the entire mixing vessel with airborne material, maximizing material transfer rates while minimizing impact and degradation. view less |  |
| Hammer Mills | Munson Machinery Co., Inc. | Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mil...view more Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mills have an extra quarter screen located in the hinged section of the top case, increasing screen area by approximately 50% over that of conventional designs, for a total of 270°. view less |  |
| High Intensity Continuous Blenders | Munson Machinery Co., Inc. | The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of li...view more The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of liquids, which can also serve to dedust and/or agglomerate dry materials. view less |  |
| Laboratory Mini-Cutters | Munson Machinery Co., Inc. | Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same ma...view more Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same materials and offer similar size reduction characteristics but at lower capacities. Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. view less |  |
| Large Block Shredders | Munson Machinery Co., Inc. | The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad ...view more The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad variety of materials, including the most difficult-to-shred products. The conical tips have an interference fit into receiver slots for rapid replacement. view less |  |
| Mini-Mixers | Munson Machinery Co., Inc. | Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant a...view more Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant and small production applications, including pre-blends. for laboratories, pilot plants and small production runs including pre-blends. view less |  |
| Ribbon, Paddle Blenders, & Plow Blenders | Munson Machinery Co., Inc. | Munson has been manufacturing high performance ribbon blenders, paddle blenders and plow blenders since 1960, and has most likely solved a horizontal blending problem precisely like yours numerous times. SERIES HD Heavy Duty for materials up to 70 lbs/cu ...view more Munson has been manufacturing high performance ribbon blenders, paddle blenders and plow blenders since 1960, and has most likely solved a horizontal blending problem precisely like yours numerous times. SERIES HD Heavy Duty for materials up to 70 lbs/cu ft. SERIES XHD Extra Heavy Duty For materials heavier than 70 lbs/cu-ft. view less |  |
| Rotary Batch Dryers/Coolers | Munson Machinery Co., Inc. | Munson Rotary Batch Equipment is highly effective for drying, cooling or moisturizing of bulk solid materials, independent of or in combination with, blending operations. Rotary machines can be configured for "direct" drying, cooling or moisturizing, or "...view more Munson Rotary Batch Equipment is highly effective for drying, cooling or moisturizing of bulk solid materials, independent of or in combination with, blending operations. Rotary machines can be configured for "direct" drying, cooling or moisturizing, or "indirect" drying or cooling. view less |  |
| Rotary Batch Mixers | Munson Machinery Co., Inc. | The Munson Rotary Batch Mixer offers 100 percent uniform particle distribution, 100 percent uniform liquid coatings, the fastest cycle times, gentle product handling, the lowest energy consumption per pound of blended product per hour, and complete discha...view more The Munson Rotary Batch Mixer offers 100 percent uniform particle distribution, 100 percent uniform liquid coatings, the fastest cycle times, gentle product handling, the lowest energy consumption per pound of blended product per hour, and complete discharge with no segregation of blended products. view less |  |
| Rotary Continuous Mixers | Munson Machinery Co., Inc. | The Munson Rotary Continuous Mixer provides gentle, 100 percent uniform, dust-free blending at rates from 25 to 5000 cubic feet per hour—inexpensively and in minimal floor space. Whether adding 1/100% minor additive to a blend, liquid-spray-coating a mate...view more The Munson Rotary Continuous Mixer provides gentle, 100 percent uniform, dust-free blending at rates from 25 to 5000 cubic feet per hour—inexpensively and in minimal floor space. Whether adding 1/100% minor additive to a blend, liquid-spray-coating a material or homogenizing, Munson has a solution to your continuous processing needs. view less |  |
| Rotary Drum Screen | Munson Machinery Co., Inc. | Munson Rotary Drum Screens utilize a cylindrical drum constructed of wedge wire screen to remove solid materials from waste streams at capacities from 200 to 4,650 gal/min. Models with drums of 24 in. (610 mm) diameter are offered in 36, 48, 50 and 72 in...view more Munson Rotary Drum Screens utilize a cylindrical drum constructed of wedge wire screen to remove solid materials from waste streams at capacities from 200 to 4,650 gal/min. Models with drums of 24 in. (610 mm) diameter are offered in 36, 48, 50 and 72 in. (914, 1219, 1270 and 1829 mm) lengths. Models with drums of 36 in. (914 mm) diameter are offered in 96 and 120 in. (2438 and 3048 mm) lengths. view less |  |
| Rotary Glass Batchers | Munson Machinery Co., Inc. | The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powd...view more The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powdered metal and other highly abrasive materials with extreme reliability and efficiency. view less |  |
| Rotary Knife Cutters | Munson Machinery Co., Inc. | Munson's Rotary Knife Cutter is designed primarily as a cutter/cracker for grains, spices, roots and related food products. One of the more popular applications is cutting corn for chicken feed. It delivers controlled end product sizes with minimum fines ...view more Munson's Rotary Knife Cutter is designed primarily as a cutter/cracker for grains, spices, roots and related food products. One of the more popular applications is cutting corn for chicken feed. It delivers controlled end product sizes with minimum fines at ultra-high rates, achieved by means of five rotating blades cutting against four stationary blades, and propelling on-size particles through a perforated screen with 270° of exposure. view less |  |
| Rotary Lump Breaker | Munson Machinery Co., Inc. | The Rotary Lump Breaker is a heavy duty, dual-rotor mill that is inexpensive, simple to maintain, and trouble free. It is designed for cost-effective, rapid, in-line de-agglomerating, or situations where high speed and high horsepower are not required. It...view more The Rotary Lump Breaker is a heavy duty, dual-rotor mill that is inexpensive, simple to maintain, and trouble free. It is designed for cost-effective, rapid, in-line de-agglomerating, or situations where high speed and high horsepower are not required. It is available in a variety of materials such as carbon steel, #304 and #316 stainless steel, abrasion resistant steel (AR-235), and in sanitary construction. view less |  |
| SCC Screen Classifying Cutters | Munson Machinery Co., Inc. | The Munson "SCC" Screen Classifying Cutter range of products are highly effective at cutting hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates. They feature proprietary helical rotor design with dozens of cut...view more The Munson "SCC" Screen Classifying Cutter range of products are highly effective at cutting hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates. They feature proprietary helical rotor design with dozens of cutter blades attached to a helical array of staggered holders called "interconnected parallelograms" to continuously shear oversize materials against twin, stationary bed knives. view less |  |
| SSC Magnum Cutters | Munson Machinery Co., Inc. | Munson's SCC Magnum Cutter is an ultra heavy-duty version of the SCC Cutter, itself an exceptionally rugged machine. While the SCC Magnum Cutter handles the same types of materials as the SCC cutter, its extremely robust design enables it to accommodate i...view more Munson's SCC Magnum Cutter is an ultra heavy-duty version of the SCC Cutter, itself an exceptionally rugged machine. While the SCC Magnum Cutter handles the same types of materials as the SCC cutter, its extremely robust design enables it to accommodate infeed of significantly larger sizes, and achieve much higher rates with ease. view less |  |
| Titan 20 Shredder | Munson Machinery Co., Inc. | Titan 20 Shredder shreds plastics and purgings, wood products, carpets, glass, aluminum, PET bottles and various industrial, medical and manufacturing waste products. It handles the toughest size reduction problem materials with low RPM, high torque and ...view more Titan 20 Shredder shreds plastics and purgings, wood products, carpets, glass, aluminum, PET bottles and various industrial, medical and manufacturing waste products. It handles the toughest size reduction problem materials with low RPM, high torque and little temperature rise. This instrument reduces bulk volume up to 75 to 80%. Positive self-cleaning shearing action assures no product binding or plugging, available with automatic reversing. view less |  |
