| 3V Allantoin | 3V Sigma USA Inc. |
|
3V Allantoin contains soothing anti-irritant properties and is widely used in cosmetic and dermatological formulations. Even at low concentrations, it produces its unique effects by stimulating healthy tissue formation granting it FDA momograph status as ...view more
3V Allantoin contains soothing anti-irritant properties and is widely used in cosmetic and dermatological formulations. Even at low concentrations, it produces its unique effects by stimulating healthy tissue formation granting it FDA momograph status as a skin protectant at 0.50%. 3V Allantoin can be employed for the formulation of scalp care shampoos and conditioners; skincare lotions, creams and gels; after-sun preparations; shaving and after-shave products; antiperspirant and deodorant products; toothpastes and OTC drug topical formulations. view less
Compliance Highlights Available
|
Request Sample |
| ABI-Latum SC™ | ABITEC Corporation |
|
ABI-Latum SC™ functions as a vegetable-derived substitute for the hydrocarbon petrolatum. Blended from food-grade oils and carrying a Kosher certification, it is less greasy than petrolatum and produces a drier, lighter silkier feel on the skin. Acting as...view more
ABI-Latum SC™ functions as a vegetable-derived substitute for the hydrocarbon petrolatum. Blended from food-grade oils and carrying a Kosher certification, it is less greasy than petrolatum and produces a drier, lighter silkier feel on the skin. Acting as a skin softener, conditioner and moisture barrier, ABI-Latum SC™ can be directly substituted for petrolatum up to 15% by weight in creams, lotions, lipsticks and lip gloss formulations. view less
Compliance Highlights Available
|
|
| Acconon® CC-6 | ABITEC Corporation |
|
Acconon® CC-6 (PEG-6 Caprylic/Capric Glycerides) is a water soluble emollient prepared from derivatized coconut fatty acids. It is nonionic and compatible with other ionic species in formulation. It is used in personal care both as an emulsifying agent wi...view more
Acconon® CC-6 (PEG-6 Caprylic/Capric Glycerides) is a water soluble emollient prepared from derivatized coconut fatty acids. It is nonionic and compatible with other ionic species in formulation. It is used in personal care both as an emulsifying agent with an HLB of 12.5 and as a low irritation secondary surfactant with a moisturizing effect due to its refatting properties.
This material acts as a surfactant yet has a moisturizing effect due to its refatting properties. Acconon CC-6 is ideally suited for use in hair care and bath products where its luxurious after feel combined with its solubilization and emulsification properties are best employed. view less
Compliance Highlights Available
|
|
| Acconon® E | ABITEC Corporation |
|
Acconon® E is a propoxylated stearyl alcohol.
Compliance Highlights Available
|
|
| Acconon® MC8-2, EP/NF | ABITEC Corporation |
Acconon® MC8-2, EP/NF is a mixture of monoesters, diesters, and triesters of glycerol and monoesters and diesters of polyethylene glycols with a mean relative molecular weight between 200-400. It may contain free macrogols.
Compliance Highlights Available
|
||
| Activederm RE | 3V Sigma USA Inc. |
|
Activederm RE is a blend of three premium oils sourced from health (Vitamin E Tocotrienols), food (Oryza Sativa Bran Oil), and advanced esterification technology (Caprylic/Capric Triglyceride). This stable system facilitates the integration of highly pote...view more
Activederm RE is a blend of three premium oils sourced from health (Vitamin E Tocotrienols), food (Oryza Sativa Bran Oil), and advanced esterification technology (Caprylic/Capric Triglyceride). This stable system facilitates the integration of highly potent tocotrienols into personal care products. Odorless, with a light yellow color, Activederm RE leaves no impact on the final formulation's appearance or fragrance. This dynamic oil spreads quickly, amplifying the reactive oxygen species (ROS) scavenging efficacy of its tocotrienols on the skin and hair. view less
Compliance Highlights Available
|
Request Sample |
| Activederm RP | 3V Sigma USA Inc. |
|
Activederm RP is a special low bulk density grade of rice starch, sourced from Italy and refined to high purity for cosmetics applications. It is bright white, odorless, has a particle size of 2-8 µm, and features a hexagonal shape. It is a 100% natural (...view more
Activederm RP is a special low bulk density grade of rice starch, sourced from Italy and refined to high purity for cosmetics applications. It is bright white, odorless, has a particle size of 2-8 µm, and features a hexagonal shape. It is a 100% natural (ISO16128 NOI: 1.0) rice derived alternative to talcum powder. As a multifunctional ingredient with scant water solubility, it applies a matte effect, absorbs sebum, and leaves a unique silky sensorial effect on the skin. view less
Compliance Highlights Available
|
Request Sample |
| Activederm RW | 3V Sigma USA Inc. |
|
Activederm RW is a hard natural wax obtained from winterization of rice crude oil. It is well suited for enhancing the consistency of oil gels such as lipsticks, hair wax and mascara as a direct and economical offset to carnauba and candelilla wax. When ...view more
Activederm RW is a hard natural wax obtained from winterization of rice crude oil. It is well suited for enhancing the consistency of oil gels such as lipsticks, hair wax and mascara as a direct and economical offset to carnauba and candelilla wax. When combined with beeswax, it provides gloss to lip care sticks and enables them to withstand higher temperatures. view less
Compliance Highlights Available
|
Request Sample |
| ALPHA-STEP® BSS-45 | Stepan Company |
ALPHA-STEP® BSS-45 is an aqueous anionic surfactant derived from oleochemicals. This versatile surfactant functions well in hard water, exhibiting excellent hard water tolerance and lime soap dispersing ability. It can be used in personal care products, e...view more
ALPHA-STEP® BSS-45 is an aqueous anionic surfactant derived from oleochemicals. This versatile surfactant functions well in hard water, exhibiting excellent hard water tolerance and lime soap dispersing ability. It can be used in personal care products, especially in toilet combo soap bars. In toilet combo soap bars, ALPHA-STEP® BSS-45 improves many characteristics such as: skin feel, foaming, mildness, marring, sloughing, wear rate, and grit. ALPHA-STEP® BSS-45 provides hydrotropic properties, which can be advantageous in the processing of toilet soap bars. The exceptionally low viscosity soap slurry produced with sulfonated methyl ester (SME) can result in enhanced mixing, increased heat transfer and improvement in the overall drying process. view less
Compliance Highlights Available
|
Request Sample | |
| ALPHA-STEP® HWC | Stepan Company |
ALPHA-STEP® HWC is a mild liquid wash concentrate that can be used in shampoos, body washes, facial washes, and hand washes. It is suitable for both pump (no stringing) and foamer (low viscosity) applicators, from economy to premium. Advantages include ex...view more
ALPHA-STEP® HWC is a mild liquid wash concentrate that can be used in shampoos, body washes, facial washes, and hand washes. It is suitable for both pump (no stringing) and foamer (low viscosity) applicators, from economy to premium. Advantages include excellent skin after-feel and creamy, stable foam. It has an appearance of a clear liquid and is biodegradable. view less
Compliance Highlights Available
|
Request Sample | |
| ALPHA-STEP® PC-48 | Stepan Company |
|
ALPHA-STEP® PC-48 is an anionic surfactant derived from oleochemicals and its hydrophobic chain distribution, which ranges from C12 to C18, allows for excellent detergency, foaming and mildness properties in a wide variety of household, industrial and per...view more
ALPHA-STEP® PC-48 is an anionic surfactant derived from oleochemicals and its hydrophobic chain distribution, which ranges from C12 to C18, allows for excellent detergency, foaming and mildness properties in a wide variety of household, industrial and personal care applications. ALPHA-STEP® PC-48 is appropriate when formulating high foaming, high active personal care products such as body wash. ALPHA-STEP® PC-48 has a very low viscosity response and is very good at clarifying formulas with high levels of electrolytes. This versatile surfactant also functions well in hard water, having favorable hard water tolerance and lime soap dispersing ability. It is a readily soluble liquid that can be easily formulated between a pH of 4 to 9. Applications include household and industrial liquid laundry, hand dishwash, hard surface cleaners, hand soaps, specialty foam applications, body washes and facial cleansers. It has an appearance of a clear yellow liquid, and is biodegradable. view less
Compliance Highlights Available
|
Request Sample |
| AMMONYX® 4 | Stepan Company |
|
AMMONYX® 4 is a substantive cationic quaternary used in conditioners, cream rinses, mousses and lotions. It as an emollient as well as a conditioning and antistatic agent. This product imparts softness and manageability to hair. Its antistatic properties ...view more
AMMONYX® 4 is a substantive cationic quaternary used in conditioners, cream rinses, mousses and lotions. It as an emollient as well as a conditioning and antistatic agent. This product imparts softness and manageability to hair. Its antistatic properties eliminate combing problems and give a smooth feel to hair. view less
Compliance Highlights Available
|
Request Sample |
| AMMONYX® 4B | Stepan Company |
|
AMMONYX® 4B possesses pronounced conditioning, softening, and emolliency characteristics. It is used in hair conditioners, rinses and skin creams and lotions. This product may also be used as a cationic emulsifier.
Compliance Highlights Available
|
Request Sample |
| AMMONYX® CDO SPECIAL | Stepan Company |
|
AMMONYX® CDO SPECIALis a Cocoamidopropylamine Oxide. It is used in shampoos, bubble baths, handsoaps and conditioners for its conditioning, foam stablizing and viscosity building properties. This product is recommended for shampoos, hand soaps, bubble bat...view more
AMMONYX® CDO SPECIALis a Cocoamidopropylamine Oxide. It is used in shampoos, bubble baths, handsoaps and conditioners for its conditioning, foam stablizing and viscosity building properties. This product is recommended for shampoos, hand soaps, bubble baths, hair conditioners, creams and lotions, wax strippers, and all-purpose cleansers. view less
Compliance Highlights Available
|
Request Sample |
| AMMONYX® CETAC | Stepan Company |
|
AMMONYX® CETAC is an aqueous solution of cetyl trimethyl ammonium chloride. It possesses pronounced conditioning, softening, and emolliency characteristics. This product is used in hair conditioners, rinses and skin creams and lotions. It may also be used...view more
AMMONYX® CETAC is an aqueous solution of cetyl trimethyl ammonium chloride. It possesses pronounced conditioning, softening, and emolliency characteristics. This product is used in hair conditioners, rinses and skin creams and lotions. It may also be used as a cationic emulsifier. view less
Compliance Highlights Available
|
Request Sample |
| AMMONYX® CETAC-30 | Stepan Company |
|
AMMONYX® CETAC-30 is an aqueous solution of Cetyl Trimethyl Ammonium Chloride. It possesses pronounced conditioning, softening, and emolliency characteristics. This product is used in hair conditioners, rinses and skin creams and lotions. It may also be u...view more
AMMONYX® CETAC-30 is an aqueous solution of Cetyl Trimethyl Ammonium Chloride. It possesses pronounced conditioning, softening, and emolliency characteristics. This product is used in hair conditioners, rinses and skin creams and lotions. It may also be used as cationic emulsifiers. view less
Compliance Highlights Available
|
Request Sample |
| AMMONYX® LMDO | Stepan Company |
|
AMMONYX® LMDO is an amido amine type of amine oxide. It is a foam enhancer, stabilizer and viscosity modifier. This product is used in light duty liquid detergents, all-purpose cleaners, and I&I cleaners. It is compatible with anionics, cationics and noni...view more
AMMONYX® LMDO is an amido amine type of amine oxide. It is a foam enhancer, stabilizer and viscosity modifier. This product is used in light duty liquid detergents, all-purpose cleaners, and I&I cleaners. It is compatible with anionics, cationics and nonionics. view less
Compliance Highlights Available
|
Request Sample |
| AMMONYX® LO | Stepan Company |
|
AMMONYX® LO is an ampholyte secondary surfactant. It has a high foaming power and offer outstanding color protection to dyed hair. It shows higher skin tolerance than most surfactants, making it an interest for mild formulations. When pH is lower than 6,5...view more
AMMONYX® LO is an ampholyte secondary surfactant. It has a high foaming power and offer outstanding color protection to dyed hair. It shows higher skin tolerance than most surfactants, making it an interest for mild formulations. When pH is lower than 6,5, Ammonyx® LO is positively charged and has to be formulated either with little or no anionics to avoid haziness. view less
Compliance Highlights Available
|
Request Sample |
| AMMONYX® MCO | Stepan Company |
|
AMMONYX® MCO is an Alkyldimethyl Amine N-oxide with many functional properties. It is a cleansing agent, foam booster, emulsifier, viscosity builder, and hair conditioning agent. This product can be formulated with anionic, nonionic and cationic products.
Compliance Highlights Available
|
Request Sample |
| AMMONYX® MO | Stepan Company |
|
AMMONYX® MO is a Myristamine Oxide with functional properties that include cleansing agent, emulsifying, hair conditioning, emolliency, foam stabilizing, viscosity boosting, and foam boosting. It is acid, alkali, and bleach stable. This product is useful ...view more
AMMONYX® MO is a Myristamine Oxide with functional properties that include cleansing agent, emulsifying, hair conditioning, emolliency, foam stabilizing, viscosity boosting, and foam boosting. It is acid, alkali, and bleach stable. This product is useful in household products and industrial & institutional products. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® 1C | Stepan Company |
|
AMPHOSOL® 1C is a mild amphoteric surfactant used in personal care formulations. It is a secondary surfactant as well as a foam booster and viscosity builder. This product is recommended for bubble baths, body washes, shampoos, baby products, pet shampoos...view more
AMPHOSOL® 1C is a mild amphoteric surfactant used in personal care formulations. It is a secondary surfactant as well as a foam booster and viscosity builder. This product is recommended for bubble baths, body washes, shampoos, baby products, pet shampoos, hand soaps, facial washes, shower gels, and ethnic products. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® 2C | Stepan Company |
|
AMPHOSOL® 2C is a Disodium Cocoamphodiacetate used in personal care formulations that is a mild amphoteric surfactant. It is also a foam booster, viscosity builder and is compatible with anionics, nonionics and cationics. This product is recommended for b...view more
AMPHOSOL® 2C is a Disodium Cocoamphodiacetate used in personal care formulations that is a mild amphoteric surfactant. It is also a foam booster, viscosity builder and is compatible with anionics, nonionics and cationics. This product is recommended for bubble baths, body washes, shampoos, baby products, pet shampoos, hand soaps, facial washes, shower gels, and ethnic products. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® 2CSF | Stepan Company |
|
AMPHOSOL® 2CSF is a mild surfactant based on Disodium Cocoamphodipropionate. It is a secondary surfactant, foam booster, viscosity builder and is compatible with anionics, nonionics and cationics. This product is recommended for neutralizing, conditioning...view more
AMPHOSOL® 2CSF is a mild surfactant based on Disodium Cocoamphodipropionate. It is a secondary surfactant, foam booster, viscosity builder and is compatible with anionics, nonionics and cationics. This product is recommended for neutralizing, conditioning, and ethnic shampoos; skin cleansers, and hard surface cleaners. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® 2CSF-AF | Stepan Company |
|
AMPHOSOL 2CSF-AF is an alcohol-free, mild amphoteric used as a secondary surfactant, foam booster and viscosity builder in personal care, household and institutional and industrial cleaning applications.
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® 810-B | Stepan Company |
|
AMPHOSOL® 810-B is a Capryl/ Capramidopropyl Betaine that is a mild amphoteric surfactant derived from Caprylate/Caprate Methyl Esters. It is a primary or secondary surfactant, conditioning agent, low foam agent and antistatic agent. This product is recom...view more
AMPHOSOL® 810-B is a Capryl/ Capramidopropyl Betaine that is a mild amphoteric surfactant derived from Caprylate/Caprate Methyl Esters. It is a primary or secondary surfactant, conditioning agent, low foam agent and antistatic agent. This product is recommended for shampoo, bath products, facial cleansers, and wipes. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® CA | Stepan Company |
|
AMPHOSOL® CA is a mild amphoteric surfactant derived from coco-methyl esters. It is used as a foam booster, viscosity builder, and antistatic agent. This product is recommended for bubble baths, hand soaps, hair conditioners, cleansing lotions & creams, s...view more
AMPHOSOL® CA is a mild amphoteric surfactant derived from coco-methyl esters. It is used as a foam booster, viscosity builder, and antistatic agent. This product is recommended for bubble baths, hand soaps, hair conditioners, cleansing lotions & creams, shampoos, shower gels, baby products, cream rinses, and pet shampoos. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® CDB-HP | Stepan Company |
|
AMPHOSOL® CDB-HP is an enhanced amphoteric surfactant formulated for cold processing and easy handling; functions as a secondary surfactant, viscosity builder, foam booster in many personal care and HI&I applications. It can also easily thicken sulfate-fr...view more
AMPHOSOL® CDB-HP is an enhanced amphoteric surfactant formulated for cold processing and easy handling; functions as a secondary surfactant, viscosity builder, foam booster in many personal care and HI&I applications. It can also easily thicken sulfate-free systems. This product is preserved with excess alkalinity, which allows the formulator flexibility when selecting a preservative for their end-use formulation. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® CG | Stepan Company |
|
AMPHOSOL® CG is an amido type betaine derived from refined coconut oil. It is used in shampoos, bubble baths and liquid handsoaps. This product provides good foaming and foam liquid stabilization with excellent wetting properties. It is compatible with an...view more
AMPHOSOL® CG is an amido type betaine derived from refined coconut oil. It is used in shampoos, bubble baths and liquid handsoaps. This product provides good foaming and foam liquid stabilization with excellent wetting properties. It is compatible with anionic, cationic, and nonionic surfactants. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® CG-50 | Stepan Company |
|
AMPHOSOL® CG-50 is a high active mild amphoteric used as a secondary surfactant, foam booster and viscosity builder in personal care products, hard surface cleaning, vehicle care and foamer specialties. AMPHOSOL® CG-50 is a high actives version of AMPHOSO...view more
AMPHOSOL® CG-50 is a high active mild amphoteric used as a secondary surfactant, foam booster and viscosity builder in personal care products, hard surface cleaning, vehicle care and foamer specialties. AMPHOSOL® CG-50 is a high actives version of AMPHOSOL® CG. It can be used in the same type of applications as the traditional AMPHOSOL® CG while providing reduction in delivery freight and storage due to higher activity level. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® CS-50 | Stepan Company |
|
AMPHOSOL® CS-50 is a Cocamidopropyl Hydroxysultaine derived from tertiary amine reacted with chlorohydroxypropane sulfonic acid. It is a secondary surfactant, foam booster, viscosity builder and it is compatible with anionics, nonionics and cationics. Thi...view more
AMPHOSOL® CS-50 is a Cocamidopropyl Hydroxysultaine derived from tertiary amine reacted with chlorohydroxypropane sulfonic acid. It is a secondary surfactant, foam booster, viscosity builder and it is compatible with anionics, nonionics and cationics. This product is recommended for bubble baths, body washes, shampoos, baby products, hand soaps, facial washes, shower gels, and ethnic products. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® HCA-HP | Stepan Company |
|
AMPHOSOL® HCA-HP is a Cocamidopropyl Betaine that is a mild amphoteric surfactant derived from coco-methyl esters. It can be used as a primary or secondary surfactant, foam booster, viscosity builder, and antistatic agent, and it is compatible with anioni...view more
AMPHOSOL® HCA-HP is a Cocamidopropyl Betaine that is a mild amphoteric surfactant derived from coco-methyl esters. It can be used as a primary or secondary surfactant, foam booster, viscosity builder, and antistatic agent, and it is compatible with anionics, nonionics and cationics. This product is recommended for bubble baths, hair conditioners, shampoos, baby products, pet shampoos, hand soaps, cleansing creams and lotions, shower gels, and cream rinses. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® HCG | Stepan Company |
|
AMPHOSOL® HCG is a low odor amido amine type betaine derived from refined coconut oil. It can be used as a primary or secondary surfactant, foam booster, viscosity builder, and is compatible with anionics, nonionics, and cationics. This product is recomme...view more
AMPHOSOL® HCG is a low odor amido amine type betaine derived from refined coconut oil. It can be used as a primary or secondary surfactant, foam booster, viscosity builder, and is compatible with anionics, nonionics, and cationics. This product is recommended for bubble baths, shampoos, baby products, hand soaps, facial cleansers, shower gels, and pet shampoos. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® HCG-HP | Stepan Company |
|
AMPHOSOL® HCG-HP is a Cocamidopropyl Betaine that is a mild amphoteric surfactant derived from coco-methyl esters. It is preserved with excess alkalinity which allows the formulator flexibility when selecting a preservative for their finished formulation....view more
AMPHOSOL® HCG-HP is a Cocamidopropyl Betaine that is a mild amphoteric surfactant derived from coco-methyl esters. It is preserved with excess alkalinity which allows the formulator flexibility when selecting a preservative for their finished formulation. It can be used as a primary or secondary surfactant, foam booster, viscosity builder, and antistatic agent, and it is compatible with anionics, nonionics and cationics. This product is recommended for bubble baths, hair conditioners, shampoos, baby products, pet shampoos, hand soaps, cleansing creams and lotions, shower gels, and cream rinses. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® HCG-K | Stepan Company |
|
AMPHOSOL® HCG-K is a low odor amido amine-type betaine derived from refined coconut oil. It is used as a primary or secondary surfactant, foam booster, viscosity builder, and is compatible with anionics, nonionics, and cationics. This product is recommen...view more
AMPHOSOL® HCG-K is a low odor amido amine-type betaine derived from refined coconut oil. It is used as a primary or secondary surfactant, foam booster, viscosity builder, and is compatible with anionics, nonionics, and cationics. This product is recommended for bubble baths, shampoos, baby products, and hand soaps. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® LB | Stepan Company |
|
AMPHOSOL® LB is a mild amphoteric surfactant derived from narrow cut methyl esters. This characteristic gives the product enhanced foaming properties compared to broad homolog distribution. It is used in shampoos, bubble baths and liquid handsoaps. This p...view more
AMPHOSOL® LB is a mild amphoteric surfactant derived from narrow cut methyl esters. This characteristic gives the product enhanced foaming properties compared to broad homolog distribution. It is used in shampoos, bubble baths and liquid handsoaps. This product provides good foaming and foam liquid stabilization with excellent wetting properties. It is compatible with anionic, cationic and nonionic surfactants. view less
Compliance Highlights Available
|
Request Sample |
| AMPHOSOL® LB-HP | Stepan Company |
|
AMPHOSOL® LB-HP is a lauramidopropyl betaine used in a variety of applications for personal care, home care, and institutional and industrial cleaning. This amphoteric surfactant can be used to boost foam and build viscosity in formulations. AMPHOSOL LB-H...view more
AMPHOSOL® LB-HP is a lauramidopropyl betaine used in a variety of applications for personal care, home care, and institutional and industrial cleaning. This amphoteric surfactant can be used to boost foam and build viscosity in formulations. AMPHOSOL LB-HP is preserved with excess alkalinity, which allows the formulator flexibility when choosing a preservative for their finished formulation. This product also meets the U.S. EPA Safer Choice Program's surfactant screen and is listed on Cleangredients.org. view less
Compliance Highlights Available
|
Request Sample |
| BBS-C | ABITEC Corporation |
|
BBS-C is an all-purpose, food-grade, partially hydrogenated vegetable oil (soybean and cottonseed) with bland flavor, good stability, superior creaming and resistance to oxidation.
Compliance Highlights Available
|
|
| BIO-SOFT® E-847 | Stepan Company |
BIO-SOFT E-847 is a nonionic surfactant that provides moderate, stable foam and high detergency in applications such as hard surface cleaners, laundry detergents, dishwash and hand soaps. It is water soluble and highly effective at low concentrations, wor...view more
BIO-SOFT E-847 is a nonionic surfactant that provides moderate, stable foam and high detergency in applications such as hard surface cleaners, laundry detergents, dishwash and hand soaps. It is water soluble and highly effective at low concentrations, working well in warm and hot water applications. It can also be used as a dyeing assistant, emulsifier and wetting agent. view less
Compliance Highlights Available
|
Request Sample | |
| BIO-SOFT® N-300 | Stepan Company |
|
BIO-SOFT® N-300 is a 60% active aqueous solution of biodegradable Triethanolamine Linear Alkylate Sulfonate. It is produced via Stepan's continuous SO3 sulfonation process, which yields a high purity product. This product exhibits excellent wetting, foami...view more
BIO-SOFT® N-300 is a 60% active aqueous solution of biodegradable Triethanolamine Linear Alkylate Sulfonate. It is produced via Stepan's continuous SO3 sulfonation process, which yields a high purity product. This product exhibits excellent wetting, foaming, and detersive properties. BIO-SOFT® N-300 is used for shampoo and bubble bath formulations where a low cloud point anionic is desired. This product was developed for oily hair shampoos. It provides effective removal of oil without stripping the hair. view less
Compliance Highlights Available
|
Request Sample |
| BIO-SOFT® N-411 | Stepan Company |
|
BIO-SOFT® N-411 is an anionic surfactant that is both oil soluble and water dispersible. In cosmetics and personal care products, this ingredient can be used in bath products, cleansing products, shampoos and hair conditioners, and can improve their abil...view more
BIO-SOFT® N-411 is an anionic surfactant that is both oil soluble and water dispersible. In cosmetics and personal care products, this ingredient can be used in bath products, cleansing products, shampoos and hair conditioners, and can improve their ability to wet the skin and hair. view less
Compliance Highlights Available
|
Request Sample |
| BIO-TERGE® 804 | Stepan Company |
|
BIO-TERGE® 804 is a concentrated surfactant blend. This unique blend of mild surfactants allows the cosmetic chemist to develop a variety of economical toiletry products from one base. It can be incorporated into shampoos, liquid hand soaps, soap bars and...view more
BIO-TERGE® 804 is a concentrated surfactant blend. This unique blend of mild surfactants allows the cosmetic chemist to develop a variety of economical toiletry products from one base. It can be incorporated into shampoos, liquid hand soaps, soap bars and liquid bubble baths by dilution of the concentrate. These systems can easily be opacified by the addition of a latex polymer or a glycol ester. It is readily dispersible in cold or warm water. The viscosity can be increased with the addition of inorganic salts or polymers. view less
Compliance Highlights Available
|
Request Sample |
| BIO-TERGE® AS-40 | Stepan Company |
|
BIO-TERGE® AS-40 is an aqueous solution of alpha olefin sulfonate which is produced by the continuous sulfonataion of alpha olefins via Stepan's falling film which minimizes the formation of disulfonates thereby offering a consistent high quality product....view more
BIO-TERGE® AS-40 is an aqueous solution of alpha olefin sulfonate which is produced by the continuous sulfonataion of alpha olefins via Stepan's falling film which minimizes the formation of disulfonates thereby offering a consistent high quality product.
BIO-TERGE® AS-40 is an ideal surfactant for a variety of detergent and personal care applications including hand soaps, shampoos, and bath products. It offers the formulator excellent viscosity and foam characteristics, as well as improved mildness over lauryl sulfates. It is more stable than alcohol sulfates over a broad pH range. view less
Compliance Highlights Available
|
Request Sample |
| BIO-TERGE® AS-40 CG-P | Stepan Company |
|
BIO-TERGE® AS-40 CG-P is an aqueous solution of sodium olefin sulfonate which is produced by the continuous sulfonation of alpha olefins via Stepan’s falling film process. Stepan’s process produces a consistently high quality product.
BIO-TERGE® AS-40 C...view more
BIO-TERGE® AS-40 CG-P is an aqueous solution of sodium olefin sulfonate which is produced by the continuous sulfonation of alpha olefins via Stepan’s falling film process. Stepan’s process produces a consistently high quality product.
BIO-TERGE® AS-40 CG-P can be used in personal care formulations where efficient viscosity building performance is desired. It is ideal for a variety of personal care formulations, such as hand soaps, shampoos, facial cleansers, and body washes. This product has excellent flash foam properties, and has improved mildness over lauryl sulfates. view less
Compliance Highlights Available
|
Request Sample |
| BIO-TERGE® AS-40 HP | Stepan Company |
|
BIO-TERGE® AS-40 HP is an anionic surfactant providing excellent viscosity, foam characteristics and mildness. It is an ideal surfactant for a variety of HI&I cleaning and personal care applications, agricultural formulations and construction products use...view more
BIO-TERGE® AS-40 HP is an anionic surfactant providing excellent viscosity, foam characteristics and mildness. It is an ideal surfactant for a variety of HI&I cleaning and personal care applications, agricultural formulations and construction products used for concrete bases, firefighting foams and dust control. BIO-TERGE® AS-40 HP is preserved with excess alkalinty, which allows the formulator flexibililty when choosing a preservative for their finished formulation. This product also meets the U.S. EPA Safer Choice Program's surfactant screen and is listed on www.cleangredients.org. view less
Compliance Highlights Available
|
Request Sample |
| BIO-TERGE® AS-40K | Stepan Company |
|
BIO-TERGE® AS-40K is an anionic surfactant providing excellent viscosity, foam characteristics and mildness. It is an ideal surfactant for a variety of personal care applications, such as liquid hand soaps, shampoos, facial cleansers and body washes. It ...view more
BIO-TERGE® AS-40K is an anionic surfactant providing excellent viscosity, foam characteristics and mildness. It is an ideal surfactant for a variety of personal care applications, such as liquid hand soaps, shampoos, facial cleansers and body washes. It offers the formulator excellent viscosity and foam characteristics, as well as improved mildness over lauryl sulfates. It is more stable than alcohol sulfates over a broad pH range. view less
Compliance Highlights Available
|
Request Sample |
| BIO-TERGE® AS-90 BEADS | Stepan Company |
|
BIO-TERGE® AS-90 BEADS is an economical and versatile, biodegradable surfactant. It is a high active, spray dried material with excellent wetting, foaming, and detersive properties in alkaline, acid, or neutral media and in the presence of metallic salts ...view more
BIO-TERGE® AS-90 BEADS is an economical and versatile, biodegradable surfactant. It is a high active, spray dried material with excellent wetting, foaming, and detersive properties in alkaline, acid, or neutral media and in the presence of metallic salts commonly found in hard waters. This product is used in a variety of household and industrial applications including shampoos, hand soaps and bath products as well as dust control, carpet frother, concrete foamer and fire fighting. It provides excellent flash foam and is stable over a broad pH range. view less
Compliance Highlights Available
|
Request Sample |
| Capmul® 708G | ABITEC Corporation |
|
Capmul® 708G EP is a glycerin monoester of caprylic acid. It is a distilled monoester.
Compliance Highlights Available
|
|
| Capmul® 907P | ABITEC Corporation |
|
Capmul® 907P is a propylene glycol heptanoic acid monoester. It has low minimum inhibitory concentration against tested gram-positive bacteria and funi. It is a light, non-greasy emollient that has good skin penetration.
Compliance Highlights Available
|
|
| Capmul® GMO-50 | ABITEC Corporation |
|
Capmul® GMO-50 (Glyceryl Monooleate) is a mixture of monoglycerides, mainly glyceryl monooleate, together with variable quantities of diglycerides and triglycerides. It is obtained by esterification of glycerol with food-grade oleic acid of vegetable orig...view more
Capmul® GMO-50 (Glyceryl Monooleate) is a mixture of monoglycerides, mainly glyceryl monooleate, together with variable quantities of diglycerides and triglycerides. It is obtained by esterification of glycerol with food-grade oleic acid of vegetable origin, or by partial glycerolysis of vegetable oil that consists mainly of triglycerides of oleic acid. A suitable antioxidant may be added. Capmul® GMO-50 is a multi-functional emulsifier useful in the production of cosmetics, pharmaceuticals, food and plastic products. view less
Compliance Highlights Available
|
|
| Capmul® GMS-50K | ABITEC Corporation |
|
Capmul® GMS-50K (Glycerol Stearate) is a mono-diglyceride of hydrogenated vegetable oil. Capmul® GMS-50K is a multi-functional emulsifier that acts as a surfactant, opacifier, and lubricant. Capmul® GMS-50K is listed in the Food Chemical Codex (FCC) under...view more
Capmul® GMS-50K (Glycerol Stearate) is a mono-diglyceride of hydrogenated vegetable oil. Capmul® GMS-50K is a multi-functional emulsifier that acts as a surfactant, opacifier, and lubricant. Capmul® GMS-50K is listed in the Food Chemical Codex (FCC) under Glycerol Monostearate and is generally recognized as safe (GRAS) according to 21 CFR § 184.1505. view less
Compliance Highlights Available
|
|
| Capmul® MCM | ABITEC Corporation |
|
Capmul® MCM is a mono-diglyceride of medium chain fatty acids (mainly caprylic and capric). It is an excellent solvent for many organic compounds, including steroids. It is also a useful emulsifier for water-oil (w/o) systems.
Compliance Highlights Available
|
|
| Capmul® MCM C10 | ABITEC Corporation |
|
Capmul® MCM C10 is a mono-diglyceride of medium chain fatty acids (mainly capric). It is a useful emulsifier for water-oil systems. It has an excellent skin feel and has been utilized in lip products to reduce sweating at elevated temperatures and improve...view more
Capmul® MCM C10 is a mono-diglyceride of medium chain fatty acids (mainly capric). It is a useful emulsifier for water-oil systems. It has an excellent skin feel and has been utilized in lip products to reduce sweating at elevated temperatures and improve gloss. It is recommended for creams, lotions, ointments and lipsticks. view less
Compliance Highlights Available
|
|
| Capmul® MCM C8 | ABITEC Corporation |
|
Capmul® MCM C8 is composed of mono and diglycerides of medium chain fatty acids (mainly caprylic). It is an excellent solvent for many organic compounds, including steroids. It is also a useful emulsifier for water-oil systems.
Compliance Highlights Available
|
|
| Capmul® PG-12 EP/NF | ABITEC Corporation |
|
Capmul® PG-12 EP/NF is a Type II Propylene Glycol Monolaurate, a propylene glycol monoester of lauric acid. It is an excellent solubilizer for many complex poorly soluble drug compounds. Capmul PG-12 EP/NF is primarily used as a carrier in soft and hard g...view more
Capmul® PG-12 EP/NF is a Type II Propylene Glycol Monolaurate, a propylene glycol monoester of lauric acid. It is an excellent solubilizer for many complex poorly soluble drug compounds. Capmul PG-12 EP/NF is primarily used as a carrier in soft and hard gelatin capsules, a penetration enhancer in transdermal drug delivery systems and a secondary emulsifier in microemulsions. view less
Compliance Highlights Available
|
|
| Capmul® S12L | ABITEC Corporation |
|
Capmul® S12L (Sodium Lauroyl Lactylate) is the partially neutralized condensation product of lauric acid and lactic acid. It is used both in hair care and skin care, providing an additional skin conditioning effect. It is an environmentally friendly repla...view more
Capmul® S12L (Sodium Lauroyl Lactylate) is the partially neutralized condensation product of lauric acid and lactic acid. It is used both in hair care and skin care, providing an additional skin conditioning effect. It is an environmentally friendly replacement for alkanolamides providing rheology control as well as giving aesthetically pleasing dense, creamy foam.
Due to the high foaming character of Capmul® S12L, it may be employed as a primary surfactant in sulfate-free formulations or used as a secondary surfactant to add additional benefits. It is an excellent emulsifier in creams and lotions, providing an alpha-hydroxy acid benefit at lower pH. view less
Compliance Highlights Available
|
|
| Caprol® 10G10O | ABITEC Corporation |
|
Caprol® 10G10O, Decaglycerol Decaoleate, is a polyglycerol ester consisting of ten oleic acid moieties esterified with a glycerol polymer containing an average of ten glycerol units. Caprol® 10G10O is a multi-functional emulsifier which also functions as ...view more
Caprol® 10G10O, Decaglycerol Decaoleate, is a polyglycerol ester consisting of ten oleic acid moieties esterified with a glycerol polymer containing an average of ten glycerol units. Caprol® 10G10O is a multi-functional emulsifier which also functions as a surfactant, lubricant, solubilizer, carrier, and crystal modifier for fats and oils. view less
Compliance Highlights Available
|
|
| Caprol® 3GO | ABITEC Corporation |
|
Caprol® 3GO is a mono-ester of oleic acid and a glycerin polymer containing an average of three glycerin units. It is a non-ionic, non-alkoxylated emulsifier. Caprol® 3GO is a multi-functional emulsifier which is used in a wide range of nutritional, cosme...view more
Caprol® 3GO is a mono-ester of oleic acid and a glycerin polymer containing an average of three glycerin units. It is a non-ionic, non-alkoxylated emulsifier. Caprol® 3GO is a multi-functional emulsifier which is used in a wide range of nutritional, cosmetic, and specialized Personal Care applications providing stable emulsions in intermediate HLB systems where two or more other emulsifiers might be used. view less
Compliance Highlights Available
|
|
| Caprol® ET | ABITEC Corporation |
|
Caprol® ET is a mixed polyglycerol ester prepared from mixed vegetable fatty acids and a glycerol polymer containing an average of six glycerol units. Caprol® ET is a crystallization inhibitor used primarily in salad oil production.
Compliance Highlights Available
|
|
| Caprol® MPGO | ABITEC Corporation |
|
Caprol® MPGO is a hydrophilic (oil/water) emulsifier that is an excellent choice for use in bakery and confectionery food products, cosmetics, toiletries, lubricants and plasticizers.
Compliance Highlights Available
|
|
| Caprol® PGE 860 | ABITEC Corporation |
|
Caprol® PGE 860 is a mono/diester of oleic acid and a glycerin polymer containing an average of ten glycerin units. A non-ionic, non-alkoxylated, multi-function emulsifier, Caprol PGE® 860 may be used in a variety of food, cosmetic, and pharmaceutical app...view more
Caprol® PGE 860 is a mono/diester of oleic acid and a glycerin polymer containing an average of ten glycerin units. A non-ionic, non-alkoxylated, multi-function emulsifier, Caprol PGE® 860 may be used in a variety of food, cosmetic, and pharmaceutical applications. It is a hydrophilic (oil/water) emulsifier and may be a performance alternative to selected polysorbate or other alkoxylated emulsifiers. Caprol® PGE 860 also functions as a clouding agent or solubilizer in flavor and color formulations. view less
Compliance Highlights Available
|
|
| Captex® 100 | ABITEC Corporation |
|
Captex® 100 is a diester formed from selected high-purity vegetable fatty acids and propylene glycol and is Kosher certified. It's totally miscible in mineral oil and in 95% ethanol. It has a lower viscosity than mineral oil and is an excellent skin emo...view more
Captex® 100 is a diester formed from selected high-purity vegetable fatty acids and propylene glycol and is Kosher certified. It's totally miscible in mineral oil and in 95% ethanol. It has a lower viscosity than mineral oil and is an excellent skin emollient and produces a smooth, non-greasy, powdery after-feel with shine. view less
Compliance Highlights Available
|
|
| Captex® 1000 | ABITEC Corporation |
|
Captex® 1000 is a triglyceride formed from selected high-purity vegetable fatty acids and glycerin and carries Kosher certification. It is an excellent emollient and imparts a pleasant, soft, luxurious, silky, water-resistant film as well as cooling effec...view more
Captex® 1000 is a triglyceride formed from selected high-purity vegetable fatty acids and glycerin and carries Kosher certification. It is an excellent emollient and imparts a pleasant, soft, luxurious, silky, water-resistant film as well as cooling effect to the skin. It provides a sheen and enhanced creamy texture to creams and lotions. Captex® 1000 is recommended for use in skin care creams, lotions and color cosmetics.
Due to its sharp melting point and improved lubricity, it offers advantages in lipstick and lip-treatment products where it imparts a long-lasting, non-greasy feel. The unique alimentation pathway typified by medium-chain triglycerides allows Captex® 1000 to function as an ingredient in cheese analogues, beverages, creamers, and nutritional supplements. It can be blended with powdered carriers at high levels resulting in a non-greasy, non-oily, free-flowing product. view less
Compliance Highlights Available
|
|
| Captex® 170 | ABITEC Corporation |
|
Captex® 170 is an ester prepared from the dehydration of coco fatty alcohols with caprylic and capric acids. It is a polar lipid suitable for solubilizing many types of active ingredients.
Compliance Highlights Available
|
|
| Captex® 200 | ABITEC Corporation |
|
Captex® 200 is an ester manufactured by the esterification of fractionated coconut fatty acids (mainly caprylic and capric) with propylene glycol. It is fully refined and deodorized. It is miscible with most organic solvents including 95% ethanol. The low...view more
Captex® 200 is an ester manufactured by the esterification of fractionated coconut fatty acids (mainly caprylic and capric) with propylene glycol. It is fully refined and deodorized. It is miscible with most organic solvents including 95% ethanol. The low viscosity, excellent lubricity and relatively non-oily character of Captex® 200 makes it ideally suited for a variety of pharmaceutical, nutritional, personal care and cosmetic applications.
Captex® 200 carries Kosher certification and has excellent stability, low irritation, bland taste and odor. Propylene glycol mono- and diesters of fats and fatty acids are FDA approved according to 21 CFR § 172.856. view less
Compliance Highlights Available
|
|
| Captex® 300 | ABITEC Corporation |
|
Captex® 300, a medium-chain triglyceride, is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (≈70%) and capric, which originate from food-grade vegetable sources. It is fully refined, bleached, and deodorized. It is miscibl...view more
Captex® 300, a medium-chain triglyceride, is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (≈70%) and capric, which originate from food-grade vegetable sources. It is fully refined, bleached, and deodorized. It is miscible with most organic solvents including 95% ethanol. view less
Compliance Highlights Available
|
|
| Captex® 355 | ABITEC Corporation |
|
Captex® 355, a medium-chain triglyceride, is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (≈55%) and capric, which originate from food-grade vegetable sources. It is fully refined, bleached, and deodorized. It is miscibl...view more
Captex® 355, a medium-chain triglyceride, is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (≈55%) and capric, which originate from food-grade vegetable sources. It is fully refined, bleached, and deodorized. It is miscible with most organic solvents including 95% ethanol. view less
Compliance Highlights Available
|
|
| Captex® 355 LOW C6 | ABITEC Corporation |
|
Captex® 355 Low C6 (also known as medium-chain triglycerides or MCT oils) is manufactured by the reesterification of fractionated coconut oil fatty acids (mainly caprylic and capric) and glycerin. Captex® 355 Low C6 is prepared from food-grade, vegetable ...view more
Captex® 355 Low C6 (also known as medium-chain triglycerides or MCT oils) is manufactured by the reesterification of fractionated coconut oil fatty acids (mainly caprylic and capric) and glycerin. Captex® 355 Low C6 is prepared from food-grade, vegetable oil raw materials. It is fully refined and deodorized and is miscible with most organic solvents including 95% ethanol. Captex® 355 Low C6 also carries Kosher certification. view less
Compliance Highlights Available
|
|
| Captex® 8000 | ABITEC Corporation |
|
Captex® 8000 (also known as glyceryl tricaprylate) is a triglyceride manufactured by esterification of caprylic acid and glycerine. It is also fully refined and deodorized and is miscible with most organic solvents including 95% ethanol. Captex® 8000 has ...view more
Captex® 8000 (also known as glyceryl tricaprylate) is a triglyceride manufactured by esterification of caprylic acid and glycerine. It is also fully refined and deodorized and is miscible with most organic solvents including 95% ethanol. Captex® 8000 has excellent stability, low irritation, bland taste and odor and is recommended for food applications, personal care lotions, creams, and cosmetics. view less
Compliance Highlights Available
|
|
| CEDEPAL® TD-403 MFLD | Stepan Company |
|
CEDEPAL® TD-403 MFLD is a mild branched chain alkyl ether sulfate. It is used in personal care products including shampoos, handsoaps and bath products. It has excellent wetting and foaming properties. It is also used for mild cleansing and baby products ...view more
CEDEPAL® TD-403 MFLD is a mild branched chain alkyl ether sulfate. It is used in personal care products including shampoos, handsoaps and bath products. It has excellent wetting and foaming properties. It is also used for mild cleansing and baby products and it is used as an emulsifying agent. This product is preserved with formaldehyde. view less
Compliance Highlights Available
|
Request Sample |
| CEDEPAL® TD-403 MKLD | Stepan Company |
|
CEDEPAL® TD-403 MKLD is a mild branched chain alkyl ether sulfate. It is used in personal care products including shampoos, handsoaps and bath products. It has excellent wetting and foaming properties. It is also used for mild cleansing and baby products ...view more
CEDEPAL® TD-403 MKLD is a mild branched chain alkyl ether sulfate. It is used in personal care products including shampoos, handsoaps and bath products. It has excellent wetting and foaming properties. It is also used for mild cleansing and baby products and it is used as an emulsifying agent. view less
Compliance Highlights Available
|
Request Sample |
| CEDEPAL® TD-407 | Stepan Company |
CEDEPAL® TD-407 is a branched chain alkyl ether sulfate. It is used in personal care products including shampoos, hand soaps and bath products. This product has excellent wetting and foaming properties.
Compliance Highlights Available
|
Request Sample | |
| Conditioner P10 | 3V Sigma USA Inc. |
|
Conditioner P10 is a cationic conditioning polymer that provides substantivity to hair without causing build-up. Its low charge density affords compatibility with surfactants in body washes and conditioning shampoos, where it can reduce wet and dry combin...view more
Conditioner P10 is a cationic conditioning polymer that provides substantivity to hair without causing build-up. Its low charge density affords compatibility with surfactants in body washes and conditioning shampoos, where it can reduce wet and dry combing resistance while enhancing sheen, body, and control. When used in hair styling products, cream rinses, and conditioners, Conditioner P10 effectively controls frizzed stresses smoothly without excessive heaviness. view less
Compliance Highlights Available
|
Request Sample |
| Conditioner P7 | 3V Sigma USA Inc. |
|
Conditioner P7 is a paraben free conditioning agent offering substantivity to hair without build-up. Compatible with anionic and amphoteric surfactants in conditioning shampoos, it stabilizes foam and improves wet and dry combing without leaving hair feel...view more
Conditioner P7 is a paraben free conditioning agent offering substantivity to hair without build-up. Compatible with anionic and amphoteric surfactants in conditioning shampoos, it stabilizes foam and improves wet and dry combing without leaving hair feeling heavy. It protects hair from damage caused by treatment products and blow-outs. Conditioner P7 may also be used in styling gels, shaving products and any hair conditioner formulation. view less
Compliance Highlights Available
|
Request Sample |
| Easygel Do | 3V Sigma USA Inc. |
|
Easygel DO is a new benzene-free polymer of the 3V Sigma USA carbomer family. It is a highly crosslinked thickener and suspending agent with enhanced dispersion properties. Easygel DO is suitable for low shear mixing processes and improves batch time rela...view more
Easygel DO is a new benzene-free polymer of the 3V Sigma USA carbomer family. It is a highly crosslinked thickener and suspending agent with enhanced dispersion properties. Easygel DO is suitable for low shear mixing processes and improves batch time relative to traditional carbomers. view less
Compliance Highlights Available
|
Request Sample |
| Easygel FA | 3V Sigma USA Inc. |
|
Easygel FA is a new, benzene-free polymer in the 3V Sigma USA carbomer family. It helps suspend and stabilize beads, exfoliants, and silicone or oil droplets in water and surfactant mixtures. Easygel FA's low pre-neutralization viscosity enables uniform d...view more
Easygel FA is a new, benzene-free polymer in the 3V Sigma USA carbomer family. It helps suspend and stabilize beads, exfoliants, and silicone or oil droplets in water and surfactant mixtures. Easygel FA's low pre-neutralization viscosity enables uniform dispersions at up to 5% activity. It is suitable for low shear mixing processes and improves batch time compared to traditional carbomers. view less
Compliance Highlights Available
|
Request Sample |
| Easygel RE | 3V Sigma USA Inc. |
|
Easygel RE is a new, benzene-free polymer in the 3V Sigma USA carbomer family. This hydrophobically modified, crosslinked thickener and suspending agent is ideal for creating products with moderate to high viscosity and smooth flow properties. Its enhance...view more
Easygel RE is a new, benzene-free polymer in the 3V Sigma USA carbomer family. This hydrophobically modified, crosslinked thickener and suspending agent is ideal for creating products with moderate to high viscosity and smooth flow properties. Its enhanced dispersion properties make Easygel RE suitable for low shear mixing processes, improving batch time compared to traditional carbomers. view less
Compliance Highlights Available
|
Request Sample |
| Emulsiderm BT25 | 3V Sigma USA Inc. |
|
Emulsiderm BT25 is behenyl alcohol (C22 alkyl homolog) ethoxylated with 25 moles EO, a nonionic surfactant used in oil-in-water (O/W) emulsions. With behenyl alcohol it forms stable lamellar liquid crystal structured emulsions having high internal oil pha...view more
Emulsiderm BT25 is behenyl alcohol (C22 alkyl homolog) ethoxylated with 25 moles EO, a nonionic surfactant used in oil-in-water (O/W) emulsions. With behenyl alcohol it forms stable lamellar liquid crystal structured emulsions having high internal oil phases with diverse chemistries including dimethicones and polar lipids. Forms firm ringing gels when dispersed at high concentrations and teamed with other high HLB ethoxylated surfactants. view less
Compliance Highlights Available
|
Request Sample |
| Emulsiderm CT25 | 3V Sigma USA Inc. |
|
Emulsiderm CT25 is a nonionic, ethoxylated oil-in-water (O/W) emulsifying agent derived from cetearyl alcohol. It serves as a dependable emulsifier, ensuring the creation of stable and smooth formulations such as creams, lotions, ointments, hair condition...view more
Emulsiderm CT25 is a nonionic, ethoxylated oil-in-water (O/W) emulsifying agent derived from cetearyl alcohol. It serves as a dependable emulsifier, ensuring the creation of stable and smooth formulations such as creams, lotions, ointments, hair conditioners, and hair styling pomades. view less
Compliance Highlights Available
|
Request Sample |
| Emulsiderm GS | 3V Sigma USA Inc. |
|
Emulsiderm GS is a classic PEG-free, self-emulsifying monoester of glycerin and plant-derived stearic acid. It functions as a builder and co-emulsifier in water-in-oil (W/O) or oil-in-water (O/W) emulsion formulations.
Compliance Highlights Available
|
Request Sample |
| Emulsiderm MP1 | 3V Sigma USA Inc. |
|
Emulsiderm MP1 is an all-in-one emulsifier and builder blend, optimized to create highly stable oil-in-water (O/W) emulsions supporting ingredients that are electrolytic, acid-state or redox active.
Compliance Highlights Available
|
Request Sample |
| Emulsiderm MPN | 3V Sigma USA Inc. |
|
Emulsiderm MPN is a unique specialized emulsifier blend with a Natural Origin Index (NOI) of 1.0 per the ISO 16128 standard. It comprises two functional polyglyceryl esters of fatty acids (PEFA) and sunflower-derived lecithin delivered in mixed chain trig...view more
Emulsiderm MPN is a unique specialized emulsifier blend with a Natural Origin Index (NOI) of 1.0 per the ISO 16128 standard. It comprises two functional polyglyceryl esters of fatty acids (PEFA) and sunflower-derived lecithin delivered in mixed chain triglycerides from coconut oil. This cold-pour liquid, free from PEG and 1,4-dioxane, excels in crafting sophisticated oil-in-water emulsions for skincare, sun protection, color cosmetics, and hair care products. Offering user-friendly application and cost-effectiveness, Emulsiderm MPN produces high-performance emulsion products with renewable content. It works seamlessly with 3V Sigma’s Sensoderm and Activederm ingredient lines, many of which are naturally derived. The synergy between Emulsiderm MPN and our rheology products, such as Rapidgel® EZ2 (NOI 0.81), enables the formulation of products with high lipid emollient loads and low emulsifier concentrations. view less
Compliance Highlights Unavailable
|
Request Sample |
| Emulsiderm O20 | 3V Sigma USA Inc. |
|
Emulsiderm O20 is a nonionic surfactant used in oil-in-water (O/W) emulsions. Dissolves in water and alcohol to form either a colloid or a clear solution. Miscible with vegetable oils, mineral oils, fragrance oils and olefins, it is used often as a solubi...view more
Emulsiderm O20 is a nonionic surfactant used in oil-in-water (O/W) emulsions. Dissolves in water and alcohol to form either a colloid or a clear solution. Miscible with vegetable oils, mineral oils, fragrance oils and olefins, it is used often as a solubilizer to incorporate these oils into clear aqueous systems such as gels. view less
Compliance Highlights Available
|
Request Sample |
| EMULSIDERM P40HCO | 3V Sigma USA Inc. |
|
Emulsiderm P40HCO is a classic nonionic surfactant used primarily to solubilize fragrance oils and other lipophilic materials into water-based formulations. This process yields transparent gels and solutions. Emulsiderm P40HCO is additionally used to stab...view more
Emulsiderm P40HCO is a classic nonionic surfactant used primarily to solubilize fragrance oils and other lipophilic materials into water-based formulations. This process yields transparent gels and solutions. Emulsiderm P40HCO is additionally used to stabilize oil-in-water (O/W) emulsions. view less
Compliance Highlights Available
|
Request Sample |
| Emulsiderm PG4S | 3V Sigma USA Inc. |
|
Emulsiderm PG4S is a pelletized nonionic co-emulsifier with oil-in-water (O/W) and water-in-oil (W/O) functionality. It is 100% plant-derived, biodegradable, mild, and moisturizing on the skin.
Compliance Highlights Available
|
Request Sample |
| Emulsiderm PG6L | 3V Sigma USA Inc. |
|
Emulsiderm PG6L is the ester of lauric acid and polyglycerin-6. It is a nonionic, viscous, liquid, hydrophilic emulsifier from 100% plant-derived components. Used as a PEG-free (1.4-dioxane = 0) co-emulsifier for oil-in-water (O/W) emulsions and hydrogel...view more
Emulsiderm PG6L is the ester of lauric acid and polyglycerin-6. It is a nonionic, viscous, liquid, hydrophilic emulsifier from 100% plant-derived components. Used as a PEG-free (1.4-dioxane = 0) co-emulsifier for oil-in-water (O/W) emulsions and hydrogels. It creates a smooth structure by improving flow characteristics. view less
Compliance Highlights Available
|
Request Sample |
| Emulsiderm PG6O | 3V Sigma USA Inc. |
|
Emulsiderm PG6O is the ester from oleic acid and Polyglycerin-6. It is a nonionic viscous liquid hydrophilic surfactant used as a co-emulsifier, emollient, and controller of viscosity. Makes the rinsing of oily products much easier and more pleasant. Havi...view more
Emulsiderm PG6O is the ester from oleic acid and Polyglycerin-6. It is a nonionic viscous liquid hydrophilic surfactant used as a co-emulsifier, emollient, and controller of viscosity. Makes the rinsing of oily products much easier and more pleasant. Having PEG-free (1,4-dioxane = 0) 100% plant-derived components, it is fully biodegradable and thermostable at high temperatures. PG6O works also as functional ingredient providing moisturizing, plasticizing and smoothing capabilities at the same time. view less
Compliance Highlights Available
|
Request Sample |
| Emulsiderm PGEO | 3V Sigma USA Inc. |
|
Emulsiderm PGEO is a natural nonionic hydrophilic surfactant obtained by the transesterification of Olea Europaea (Olive) Oil and Polyglycerin-6. Makes the rinsing of oily products much easier and more pleasant and enhances the absorption of active ingred...view more
Emulsiderm PGEO is a natural nonionic hydrophilic surfactant obtained by the transesterification of Olea Europaea (Olive) Oil and Polyglycerin-6. Makes the rinsing of oily products much easier and more pleasant and enhances the absorption of active ingredients through the skin. Improves UV ray protection thanks to better dispersion of physical and chemical sunscreens. Ideal for use in shampoos, detanglers, cleansers and make-up removers adding lubricity and re-fatting better than the PEG glyceryl esters but with no effect on foam build or viscosity. view less
Compliance Highlights Available
|
Request Sample |
| Emulsiderm WLC | 3V Sigma USA Inc. |
|
Emulsiderm WLC is a naturally derived refatting agent designed for sulfate-free shampoos, shower gels, and mild cleansers. It may soften skin after cleansing and improve the wet compatibility of hair on rinsing.
Compliance Highlights Available
|
Request Sample |
| Hairfix CLR | 3V Sigma USA Inc. |
|
Hairfix CLR is an acrylic copolymer fixative resin (30% active solids) that disperses immediately in water. It enhances the humidity resistance of hair styling products, demonstrates excellent synergy with Hairfix STF for a strong and resistant hold. CLR ...view more
Hairfix CLR is an acrylic copolymer fixative resin (30% active solids) that disperses immediately in water. It enhances the humidity resistance of hair styling products, demonstrates excellent synergy with Hairfix STF for a strong and resistant hold. CLR may be combined with Polygel HG or Synthalen® K to create transparent, non-flaking hair styling gels. view less
Compliance Highlights Available
|
Request Sample |
| Hairfix STF | 3V Sigma USA Inc. |
|
Hairfix STF is an acrylic-based fixative resin (100% active solids). Highly efficient and easy to disperse, Hairfix STF has enhanced film-forming capabilities relative to sodium polyacrylate additives. Hairfix STF has excellent compatibility with Polygel ...view more
Hairfix STF is an acrylic-based fixative resin (100% active solids). Highly efficient and easy to disperse, Hairfix STF has enhanced film-forming capabilities relative to sodium polyacrylate additives. Hairfix STF has excellent compatibility with Polygel HG and Synthalen® K to achieve crystal clear, non-flaking hair gel formulations. Hairfix STF synergistically increases hold with many common hair fixatives. Normal use level is between 0.1 and 0.3%, depending on the type of formulation and final desired hold. view less
Compliance Highlights Available
|
Request Sample |
| Hydro~Kote® 112 | ABITEC Corporation |
|
Hydro~Kote® 112 is a standard lauric coating fat produced from palm kernel oil that is hydrogenated, refined, bleached and deodorized. It has soy lecithin added. It is primarily used as a replacement for cocoa butter where its texture and narrow melting r...view more
Hydro~Kote® 112 is a standard lauric coating fat produced from palm kernel oil that is hydrogenated, refined, bleached and deodorized. It has soy lecithin added. It is primarily used as a replacement for cocoa butter where its texture and narrow melting range characteristics are essential. The bland character, low irritation and excellent stability of Hydro~Kote® 112 make it an ideal material for cosmetic applications such as lipsticks, glosses, pomades, solid fragrances, antiperspirant sticks, emollient creams and lotions. view less
Compliance Highlights Available
|
|
| Hydro~Kote® C | ABITEC Corporation |
|
Hydro~Kote® C is a member of the crystal promoters and stearines family. It is a multi-purpose, low iodine value, high melting point oil that is further processed into flaked form for easier handling.
Compliance Highlights Available
|
|
| Hydro~Kote® M | ABITEC Corporation |
|
Hydro~Kote® M is a standard lauric coating fat produced from palm kernel oil that is hydrogenated, refined, bleached and deodorized. It has soy lecithin added. Hydro~Kote® M is primarily used as a replacement for cocoa butter where its texture and narrow ...view more
Hydro~Kote® M is a standard lauric coating fat produced from palm kernel oil that is hydrogenated, refined, bleached and deodorized. It has soy lecithin added. Hydro~Kote® M is primarily used as a replacement for cocoa butter where its texture and narrow melting range characteristics are essential. The bland character, low irritation and excellent stability of Hydro~Kote® M make it an ideal material for cosmetic applications. view less
Compliance Highlights Available
|
|
| LATHANOL® LAL COARSE | Stepan Company |
|
LATHANOL® LAL COARSE is a Sodium Lauryl Sulfoacetate used as a primary/secondary surfactant, foaming agent, wetting agent and/or emulsifier. It is milder to skin than ethoxylated alcohol sulfates. This product is found in coarse form.
Compliance Highlights Available
|
Request Sample |
| LATHANOL® LAL FLAKE | Stepan Company |
|
LATHANOL® LAL FLAKE is a Sodium Lauryl Sulfoacetate used as a primary/secondary surfactant, foaming agent, wetting agent and/or emulsifier. It is milder to skin than ethoxylated alcohol sulfates. This product is found in flake form.
Compliance Highlights Available
|
Request Sample |
| LATHANOL® LAL POWDER | Stepan Company |
|
LATHANOL® LAL POWDER is a Sodium Lauryl Sulfoacetate used as a primary/secondary surfactant, foaming agent, wetting agent and/or emulsifier. It is milder to skin than ethoxylated alcohol sulfates. It can be used in bubble baths, shampoos, cleansing creams...view more
LATHANOL® LAL POWDER is a Sodium Lauryl Sulfoacetate used as a primary/secondary surfactant, foaming agent, wetting agent and/or emulsifier. It is milder to skin than ethoxylated alcohol sulfates. It can be used in bubble baths, shampoos, cleansing creams. This product is found in powder form. view less
Compliance Highlights Available
|
Request Sample |
| MAPROSYL® 25G-HP | Stepan Company |
|
MAPROSYL® 25G-HP is an exceptionally mild glutamate surfactant well-suited for skin cleansing where safety and mildness are priorities. It generates a lightweight foam that spreads and rinses easily and leaves skin feeling "baby soft".
Compliance Highlights Available
|
Request Sample |
| MAPROSYL® 30-B | Stepan Company |
|
MAPROSYL® 30-B is a naturally derived, exceptionally mild sulfate-free cleanser with excellent wetting and foaming properties. It provides good detergency and good rinsing properties. It is compatible with anionic, cationic and nonionic surfactants.
Compliance Highlights Available
|
Request Sample |
| Naturederm DDG | 3V Sigma USA Inc. |
|
Naturederm DDG is a natural film former derived from coconut oil, glucose, and fatty acids. It can replace synthetic polymers in SPF and color cosmetic applications as a biodegradable, renewable pigment disperser and water resistance agent. This complex e...view more
Naturederm DDG is a natural film former derived from coconut oil, glucose, and fatty acids. It can replace synthetic polymers in SPF and color cosmetic applications as a biodegradable, renewable pigment disperser and water resistance agent. This complex ester system creates a hydrophobic barrier that holds hydrophobic active ingredients on the skin. Its hydrophobic films provide water resistance in emulsions and spray products. At normal use levels of 2-4%, Naturederm DDG feels light, non-greasy, and non-sticky. view less
Compliance Highlights Unavailable
|
Request Sample |
| Naturehair SHN Plus | 3V Sigma USA Inc. |
|
Naturehair SHN Plus is a PEG-free, silicone-free glossing agent conveying shine and luminosity to hair. It is suitable for serums, spritzes, sprays, leave-on lotions and hair masks. Naturehair SHN Plus presents an acceptable alternative to dimethicone gum...view more
Naturehair SHN Plus is a PEG-free, silicone-free glossing agent conveying shine and luminosity to hair. It is suitable for serums, spritzes, sprays, leave-on lotions and hair masks. Naturehair SHN Plus presents an acceptable alternative to dimethicone gum blends. view less
Compliance Highlights Available
|
Request Sample |
