| ADDAPT® WaxMul™ WM 110 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 110 in paints, printing inks, leather polishes, and paper coatings to improve water resistance and surface smoothness. | |
| ADDAPT® WaxMul™ WM 120 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 120 is an emulsion of polyethylene and paraffin waxes in water. It is used in paints and various kinds of polishes to provide gloss, repel water, and improve the adhesion to smooth surfaces. | |
| ADDAPT® WaxMul™ WM 15 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 15 is an emulsion of Polyethylene wax in water. It is used as an anti-slip agent, to reduce yellowing, and improves adhesion to smooth surfaces. This product is used in paints and floor, car, and leather polishes. | |
| ADDAPT® WaxMul™ WM 25 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitabl...Vea Mas ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitable as a slip agent for over print varnishes. Vea Menos | |
| ADDAPT® WaxMul™ WM 35 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 35 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, floor polishes, and paper coatings. This product improves abrasion resistance and wet scrub resistance. | |
| ADDAPT® WaxMul™ WM 45 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking r...Vea Mas ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking resistance. Vea Menos | |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agente...Vea Mas AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agentes fitosanitarios. AEROSIL® R 972 tiene control reológico de sistemas líquidos complejos y es resistente al agua e hidrofobizante de sistemas líquidos. Se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y sel...Vea Mas AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y selladores de silicona, toner negativo, adhesivos y revestimientos poliméricos. AEROSIL® R 974 se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Además, mejora la hidrofobicidad y la reología de las tintas de impresión offset. Vea Menos | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...Vea Mas AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. Vea Menos | Request Sample |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...Vea Mas Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. Vea Menos | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...Vea Mas Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. Vea Menos | |
| AQUACER® 537 | BYK 毕克 | Ceras de emulsión para mejorar las propiedades de superficie de sistemas transmitidos por agua. Emulsión aniónica basada en una cera de parafina modificada. | |
| AQUACER® 539 | BYK 毕克 | Ceras de emulsión para mejorar las propiedades de superficie de sistemas transmitidos por agua. Emulsión no-iónica basada en una cera de parafina modificada. | |
| AQUACER 570 | BYK 毕克 | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...Vea Mas AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. Vea Menos | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...Vea Mas Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. Vea Menos | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| BC 83/132 | Basildon Chemical Company Ltd. | BC 83/132 is a methyl hydrogen polysiloxane silicone fluid that is used in paints. It displays strong cross-linking attributes and imparts anti-adhesive and hydrophobic properties to treated surfaces. This product has a specific gravity of 1.0, and a flas...Vea Mas BC 83/132 is a methyl hydrogen polysiloxane silicone fluid that is used in paints. It displays strong cross-linking attributes and imparts anti-adhesive and hydrophobic properties to treated surfaces. This product has a specific gravity of 1.0, and a flash point of greater than 100 degrees Celsius. Vea Menos | |
| BC 90/063 | Basildon Chemical Company Ltd. | BC 90/063 is a white, mobile, modified amino silicone emulsion that is used in paint polishes and vinyl protecting agents. It provides good water repelling properties and good gloss retention properties. This product is liquid in form, and is easily dilut...Vea Mas BC 90/063 is a white, mobile, modified amino silicone emulsion that is used in paint polishes and vinyl protecting agents. It provides good water repelling properties and good gloss retention properties. This product is liquid in form, and is easily dilutable. Vea Menos | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® CHMA es un monómero hidrofóbico de metacrilato. Es un metacrilato monofuncional, siendo ideal para la síntesis de polímeros acrílicos. Bisomer® CHMA puede usarse para mejorar la hidrofobicidad, resistencia a la intemperie y resistencia física y q...Vea Mas Bisomer® CHMA es un monómero hidrofóbico de metacrilato. Es un metacrilato monofuncional, siendo ideal para la síntesis de polímeros acrílicos. Bisomer® CHMA puede usarse para mejorar la hidrofobicidad, resistencia a la intemperie y resistencia física y química de las resinas acrílicas. Este producto también es un diluyente reactivo útil en adhesivos y revestimientos 2K. Vea Menos | |
| Butyl Acrylate | Henan Harvest Chem Co., LTD. | Butyl Acrylate is a clear, colorless liquid with a fruity odor. It is used in the production of homopolymers and co-polymers. This product provides water resistance, low temperature flexibility, and weather and sunlight resistance when used in latex paint...Vea Mas Butyl Acrylate is a clear, colorless liquid with a fruity odor. It is used in the production of homopolymers and co-polymers. This product provides water resistance, low temperature flexibility, and weather and sunlight resistance when used in latex paint applications. Vea Menos | |
| C-350 | Chan Sieh Enterprises Co, Ltd. | C-350 is a petroleum wax blend in the form of a white emulsion. This product is acid stable and can be blended with rosin soap. It can be used as a water-repellent agent in paper internal sizing and surface coatings. | |
| Calcium Stearate | Shanghai Tengmin Industry Co., Ltd. | Calcium Stearate comes as a fine white non-toxic powder that has several different uses across industries. This product is primarily used as an additive in paints and coatings by providing water resistance. | |
| Coadis™ 123 K | Arkema Rheology & Specialty Additives | COADIS 123 K es un dispersor versátil sintético que proporciona dispersión fácil de relleno y de pigmento, buena estabilidad de almacenamiento y resistencia al agua mejorada, en sistemas transmitidos por agua. Consecuentemente, es recomendado para una a...Vea Mas COADIS 123 K es un dispersor versátil sintético que proporciona dispersión fácil de relleno y de pigmento, buena estabilidad de almacenamiento y resistencia al agua mejorada, en sistemas transmitidos por agua. Consecuentemente, es recomendado para una amplia gama de sistemas transmitidos por agua. Vea Menos | Request Sample |
| Coadis™ 3412 | Arkema Rheology & Specialty Additives | Coadis™ 3412 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coadis™ BR 40 | Arkema Rheology & Specialty Additives | El BR 40 de COADIS es un dispersor sintético versátil que proporciona dispersión fácil de rellenos y de pigmentos, buena estabilidad del almacenamiento y resistencia al agua mejorada, en los sistemas transmitidos por agua. Por lo tanto, es recomendado pa...Vea Mas El BR 40 de COADIS es un dispersor sintético versátil que proporciona dispersión fácil de rellenos y de pigmentos, buena estabilidad del almacenamiento y resistencia al agua mejorada, en los sistemas transmitidos por agua. Por lo tanto, es recomendado para una amplia gama de sistemas transmitidos por agua. Vea Menos | Request Sample |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobuty...Vea Mas Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 provides clinging, anti-water, and weather protection to paint and inks. Vea Menos | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl I...Vea Mas Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP15 provides clinging, anti-water, and weather protection to paint and inks. Vea Menos | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, an...Vea Mas Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, anti-water, and weather protection to paint and inks. Vea Menos | |
| CV-2502 | NuSil Silicone Technology 1 | CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embeddin...Vea Mas CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embedding compound for electronic systems. Vea Menos | |
| CV-8251 | NuSil Silicone Technology 1 | CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that requ...Vea Mas CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that require minimal volatile condensables to protect sensitive devices from condensation. Vea Menos | |
| CV1-2640 | NuSil Silicone Technology 1 | CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and...Vea Mas CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and electrical applications. Another function of this product is to protect sensitive devices from condensation. Vea Menos | |
| CV2-2640 | NuSil Silicone Technology 1 | CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-...Vea Mas CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-flowing material so it can be used to adhere covers onto housings. Vea Menos | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven...Vea Mas Dow Corning® 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. Vea Menos | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of ...Vea Mas Dow Corning® 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. Vea Menos | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coati...Vea Mas Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. Vea Menos | |
| Dynasylan® 6498 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6498 es un vinilsilano concentrado (siloxano oligomérico) que contiene vinilo y grupos etoxilados. Dynasylan® 6498 es un líquido incoloro casi inodoro de baja viscosidad. Dynasylan® 6498 es un excelente compatibilizador entre masillas inorgán...Vea Mas Dynasylan® 6498 es un vinilsilano concentrado (siloxano oligomérico) que contiene vinilo y grupos etoxilados. Dynasylan® 6498 es un líquido incoloro casi inodoro de baja viscosidad. Dynasylan® 6498 es un excelente compatibilizador entre masillas inorgánicas (por ejemplo, caolín, MDH, ATH) y polímeros orgánicos (por ejemplo, EPDM, EVA, PE). El alto punto de ebullición de Dynasylan® 6498, junto con su punto de inflamación brinda excelentes ventajas en términos de seguridad y manipulación durante el procesamiento. Desde el punto de vista ecológico, es importante destacar que la cantidad de metanol obtenido por hidrólisis (COV) que se libera es significativamente menor a la de los silanos de vinilo monoméricos. Vea Menos | |
| Dynasylan® F 8815 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8815 es un oligosiloxano fluoroalquilo-funcional a base de agua que actúa como agente modificador de superficie en sustratos oxídicos, carboxi e hidroxi-funcionales, por ejemplo, cerámica y fibras naturales como algodón y cuero. Dynasylan® F ...Vea Mas Dynasylan® F 8815 es un oligosiloxano fluoroalquilo-funcional a base de agua que actúa como agente modificador de superficie en sustratos oxídicos, carboxi e hidroxi-funcionales, por ejemplo, cerámica y fibras naturales como algodón y cuero. Dynasylan® F 8815 es un líquido amarillento, levemente turbio. Este producto se puede mezclar con agua hasta llegar a la concentración deseada. Vea Menos | |
| Dynasylan® PTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® PTEO, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® PTEO se considera trifuncional porque sus tres grupos alcoxi pueden hidrolizarse. Por otra parte...Vea Mas Dynasylan® PTEO, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® PTEO se considera trifuncional porque sus tres grupos alcoxi pueden hidrolizarse. Por otra parte, Dynasylan® PTEO contiene un grupo propilo que agrega un carácter hidrofóbico a los revestimientos. La hidrólisis genera los grupos silanol que, en una reacción de condensación subsecuente, forma enlaces siloxanos (-Si-O-Si-) muy estables. La condensación se produce paralelamente a la hidrólisis una vez que se forma cierta cantidad de grupos silanol. Las tasas de hidrólisis y condensación absolutas y relativas depende de diversos factores. Los más importantes son el pH, la concentración, el solvente, la temperatura y el catalizador. Vea Menos | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| EXCEVAL™ RS-1717 | Kuraray Europe GmbH 可乐丽 | Es un alcohol de polivinilo que es conveniente para el moldeado en función. Basado en tecnologías especiales, un alcohol de polivinilo granulado Poliuretano ede ser procesado con tecnología plástica convencional, tal como extrusión de la película soplada ...Vea Mas Es un alcohol de polivinilo que es conveniente para el moldeado en función. Basado en tecnologías especiales, un alcohol de polivinilo granulado Poliuretano ede ser procesado con tecnología plástica convencional, tal como extrusión de la película soplada y plana, y moldeo por inyección. Vea Menos | |
| EXCEVAL™ RS-2117 | Kuraray Europe GmbH 可乐丽 | Es un grado completamente hidrolizado de copolímero soluble en agua del alcohol de etileno-vinilo que logra la compatibilidad de ambos, alta resistencia al agua y estabilidad de la viscosidad. | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...Vea Mas EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. Vea Menos | |
| Frotect FT-1100 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-1100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays good water repellency, hydrolytic stability, surface characteristics, color deepening, and defoaming pr...Vea Mas Frotect FT-1100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays good water repellency, hydrolytic stability, surface characteristics, color deepening, and defoaming properties. This product is ideal for use in artificial leather and coating applications. Vea Menos | |
| Frotect FT-1200 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-1200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good defoaming properties, excellent surface characteristics, and good water repellency, hydrolyti...Vea Mas Frotect FT-1200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good defoaming properties, excellent surface characteristics, and good water repellency, hydrolytic stability, and color deepening. This product is ideal for use in artificial leather and coating applications. Vea Menos | |
| Frotect FT-2100 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-2100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency, excellent surface characteristics, and good hydrolytic stability, color dee...Vea Mas Frotect FT-2100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency, excellent surface characteristics, and good hydrolytic stability, color deepening, and defoaming properties. This product is ideal for use in artificial leather and coating applications. Vea Menos | |
| Frotect FT-2200 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-2200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency and defoaming properties, excellent surface characteristics, and good hydrol...Vea Mas Frotect FT-2200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency and defoaming properties, excellent surface characteristics, and good hydrolytic stability and color deepening. This product is ideal for use in artificial leather and coating applications. Vea Menos | |
| Frotect FT-3000 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-3000 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and color deepening, excellent water repellency and defoaming properties...Vea Mas Frotect FT-3000 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and color deepening, excellent water repellency and defoaming properties, and good surface characteristics. This product is ideal for use in artificial leather and coating applications. Vea Menos | |
| Frotect FT-4000 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-4000 is is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and defoaming properties, excellent water repellency and surface char...Vea Mas Frotect FT-4000 is is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and defoaming properties, excellent water repellency and surface characteristics, and good color deepening. This product is ideal for use in artificial leather and coating applications. Vea Menos | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...Vea Mas HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. Vea Menos | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. Vea Menos | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. Vea Menos | |
| HS972 | Tianyi Chemical Engineering Material Co., Ltd. | HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 3.7 and 4.5. Vea Menos | |
| HS974 | Tianyi Chemical Engineering Material Co., Ltd. | HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| HS976 | Tianyi Chemical Engineering Material Co., Ltd. | HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Una dispersión acuosa al 50% de una cera de polietileno de alta MW. Tiene control de deslizamiento y resistencia al roce, tiene un impacto moderado en brillo, tensioactivo no iónico para buena dispersabilidad/compatibilidad y estabilidad de almacenamiento...Vea Mas Una dispersión acuosa al 50% de una cera de polietileno de alta MW. Tiene control de deslizamiento y resistencia al roce, tiene un impacto moderado en brillo, tensioactivo no iónico para buena dispersabilidad/compatibilidad y estabilidad de almacenamiento excelente sin el uso de resinas o aglutinantes. Vea Menos | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based coating systems. | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | Una emulsión del polietileno aniónico, de alta densidad. Proporciona una mayor resistencia a la abrasión y el deslizamiento. También mejora la resistencia al rayado y offset y los resultados de deslices angulares. Ideal para aplicaciones en las que se re...Vea Mas Una emulsión del polietileno aniónico, de alta densidad. Proporciona una mayor resistencia a la abrasión y el deslizamiento. También mejora la resistencia al rayado y offset y los resultados de deslices angulares. Ideal para aplicaciones en las que se requiere un rápido desarrollo de resistencia al agua. Vea Menos | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | Una emulsión de parafina en agua. Proporciona excelente resistencia al agua cuando se usa en tintas y recubrimientos a base de agua. Se produce mediante un único proceso de emulsificación y está libre de agentes tensioactivos hidrófilos. | |
| Hydropalat® SL 3612 | BASF Formulation Additives 巴斯夫配方助剂 | Agente polimérico altamente eficaz aqueo-repelente para pinturas acuosas. Proporciona características hidrofóbicas a las pinturas de bajo y alto PVC (Cloruro de Polivinilo). | |
| Hydropel AF (EBS Wax Powder) | Shamrock Technologies, Inc. 三叶科技 | Hydropel AF es una cera sintética para revestimientos termoplásticos. Está formulada para preservar la integridad de los revestimientos termoplásticos. Se dispersa de forma homogénea por todo el revestimiento, brindando una gran repelencia al agua inmedia...Vea Mas Hydropel AF es una cera sintética para revestimientos termoplásticos. Está formulada para preservar la integridad de los revestimientos termoplásticos. Se dispersa de forma homogénea por todo el revestimiento, brindando una gran repelencia al agua inmediatamente y durante toda la vida útil de la película. En contraste, las siliconas tradicionales y soluciones de cera flotan a la superficie de los revestimientos, brindando solo beneficios a corto plazo. Otros beneficios son la excelente durabilidad en la intemperie, resistencia mejorada a la corrosión salina y humedad, resistencia mejorada a salpicaduras de agua con un efecto mínimo en la suciedad recogida, el brillo y la claridad. Vea Menos | |
| Hydropel GP (Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | Hydropel GP es una aleación de cera que brinda una gran repelencia al agua. Está formulada para dispersarse de forma homogénea por todo el revestimiento, brindando una gran repelencia al agua inmediatamente y durante toda la vida útil de la película. En c...Vea Mas Hydropel GP es una aleación de cera que brinda una gran repelencia al agua. Está formulada para dispersarse de forma homogénea por todo el revestimiento, brindando una gran repelencia al agua inmediatamente y durante toda la vida útil de la película. En contraste, las siliconas tradicionales y soluciones de cera flotan a la superficie de los revestimientos, brindando solo beneficios a corto plazo. Este producto puede usarse en cualquier tipo de revestimiento: barnices/tintes, a base de solvente/agua y esmalte secados al horno/al aire. Vea Menos | |
| Hydropel QB (Paraffin / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | Una mezcla de parafina y cera sintética. Mantiene repelencia al agua durante más de dos años. También mejora el deslizamiento y resistencia al rayado, por su naturaleza inherente de cera, con un efecto mínimo en la suciedad recogida, el brillo y la clarid...Vea Mas Una mezcla de parafina y cera sintética. Mantiene repelencia al agua durante más de dos años. También mejora el deslizamiento y resistencia al rayado, por su naturaleza inherente de cera, con un efecto mínimo en la suciedad recogida, el brillo y la claridad. Vea Menos | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| Loxanol® MI 6840 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® MI 6840 (anteriormente Basophob® WDS) es una dispersión acuosa altamente concentrada de cera de parafina en agua. Aumenta la hidrofobicidad de los revestimientos exteriores a base de agua. | |
| Methyltriethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Methyltriethoxysilane is a colorless transparent liquid that can be used as a penetrating sealer and surface modifier to generate hydrophobicity (mineral fillers or inorganic pigments). When the product is introduced to polymers it gives a medium-chain a...Vea Mas Methyltriethoxysilane is a colorless transparent liquid that can be used as a penetrating sealer and surface modifier to generate hydrophobicity (mineral fillers or inorganic pigments). When the product is introduced to polymers it gives a medium-chain alkyl functionality. Vea Menos | |
| Methyltriethoxysilane | Zhejiang Wynca Chemical Industry Group | Methyltriethoxysilane is a colorless clear liquid used as a water repellant and primer for hard coating of plastic and synthesis for cross-linked resin. | |
| Michem® Lube 135 | Michelman | Michem® Lube 135 promotes water and mar resistance and anti-blocking properties when used as an additive in various coating formulations. This product has proven successful for rubber glove release as well as various paint and coatings applications. | |
| Michem® Lube 180 | Michelman | Michem® Lube 180 is an anionic co-emulsion of carnauba and paraffin waxes that provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistanc...Vea Mas Michem® Lube 180 is an anionic co-emulsion of carnauba and paraffin waxes that provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistance and water repellence in varnishes and other coatings. Vea Menos | |
| Michem® Lube 182 | Michelman | Michem® Lube 182 provides slip, release and anti-block properties in a number of applications ranging from wood coatings to being blended with synthetic and natural lattices. It is also a mar and scratch resistant and water repellent additive in varnishes...Vea Mas Michem® Lube 182 provides slip, release and anti-block properties in a number of applications ranging from wood coatings to being blended with synthetic and natural lattices. It is also a mar and scratch resistant and water repellent additive in varnishes and other coatings. This product is slightly higher in melt point than Michem® Lube 180. Vea Menos | |
| Michem® Lube 190 | Michelman | Michem® Lube 190 is an anionic polyethylene wax emulsion that provides mar, rub, block and scratch resistance as well as improved water resistance in coatings and graphic arts formulations. | |
| Michem® Lube 270R | Michelman | Michem® Lube 270R provides excellent water and block resistance in paint and coating formulations. This product is useful for long term water bead and for water repellency on wood as well as a tire dressing and buffability for auto care. | |
| Michem® Lube 743G | Michelman | Michem® Lube 743G is a nonionic paraffin wax emulsion, exhibiting a high degree of water resistance and block resistance this product is used in many water based coating applications. | |
| Michem® Prime 498340R | Michelman | Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical...Vea Mas Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical version of Michem® Prime 4983R. The adhesion properties of Michem® Prime facilitate its use as a primer for extrusion coatings. Utilizing this "tie coat" functionality, dissimilar materials can be combined to produce a substrate with the unique properties of each material. Vea Menos | |
| Michem® Prime 4983R | Michelman | Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or prim...Vea Mas Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings. Vea Menos | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...Vea Mas MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. Vea Menos | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...Vea Mas MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. Vea Menos | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...Vea Mas MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. Vea Menos | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...Vea Mas MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. Vea Menos |
