| ADDITOL® VXW 4934 | Allnex | Aditivo para la regulación de propiedades reológicas de pinturas diluibles en agua. | Request Sample |
| ADDITOL® VXW 6387 | Allnex | Agente electroneutral de anti-asentamiento y de humectación, sin la adición de silicio. | Request Sample |
| ADDITOL® XL 270 | Allnex | Humectación no iónica y agente anti-asentamiento. | Request Sample |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protecció...Vea Mas AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protección de las plantas. AEROSIL® 200 tiene control de la reología y tixotropía de los sistemas líquidos, aglutinantes y polímeros. También se utiliza para mejorar el flujo libre y anti-aglutinante característico de polvos, así como un anti-sedimentación, espesamiento, y agente anti-flacidez. Vea Menos | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...Vea Mas AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. Vea Menos | Request Sample |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y t...Vea Mas AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y tixotropía de líquidos polares complejos basados en epoxi, poliuretano, o resinas de viniléster. También ayuda a que el engrosamiento y tixotropía de geles de cable para cables de fibra óptica. Vea Menos | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...Vea Mas AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. Vea Menos | Request Sample |
| AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reol...Vea Mas AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reología en sistemas líquidos complejos tales como 2 recubrimientos pack- epoxi. También se puede aplicar en sistemas de recubrimiento como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos c...Vea Mas AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. También se puede incorporar fácilmente en formulaciones de caucho de silicona y mejora sus propiedades mecánicas y ópticas. Vea Menos | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, ...Vea Mas AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar el efecto de protección contra la corrosión. Además, ofrece un eficaz control reológico en sistemas líquidos complejos. Vea Menos | Request Sample |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agente...Vea Mas AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agentes fitosanitarios. AEROSIL® R 972 tiene control reológico de sistemas líquidos complejos y es resistente al agua e hidrofobizante de sistemas líquidos. Se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y sel...Vea Mas AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y selladores de silicona, toner negativo, adhesivos y revestimientos poliméricos. AEROSIL® R 974 se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Además, mejora la hidrofobicidad y la reología de las tintas de impresión offset. Vea Menos | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...Vea Mas AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. Vea Menos | Request Sample |
| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® is a multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. This product is biodegradable and is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocell...Vea Mas ANTIGEL® is a multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. This product is biodegradable and is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. It is composed of modified phenol derivative and methyl ethyl ketoxime (Meko) in solvent mixture with a component promoting wetting. This product is a clear to slightly turbid, light brownish liquid. Vea Menos | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has...Vea Mas ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has the following properties: stabilisation of viscosity against air oxidation, prevention of skinning, improved wetting, prevention of settlement, reduction of dispersing time, reworking of thickened batches, removal of floatation phenomena, and promotion of flow and gloss. The stabilisation is based on the oxygen binding properties of the antioxidant. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. Vea Menos | |
| APL-308 | Tianyi Chemical Engineering Material Co., Ltd. | APL-308, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| APL-309 | Tianyi Chemical Engineering Material Co., Ltd. | APL-309, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| Borchi® Gen 911 | OMG Borchers GmbH | Borchi® Gen 911 es un agente humectante y dispersante disuelto en hidrocarburos que se puede usar en pinturas y pastas de pigmentos con disolventes. Se recomienda usarlo especialmente en sistemas a base de resina alquídica. Este producto está compuesto po...Vea Mas Borchi® Gen 911 es un agente humectante y dispersante disuelto en hidrocarburos que se puede usar en pinturas y pastas de pigmentos con disolventes. Se recomienda usarlo especialmente en sistemas a base de resina alquídica. Este producto está compuesto por una combinación de ingredientes activos con excelentes propiedades de humectación y dispersión como también propiedades antisedimentación durante el almacenamiento. Impide la reaglomeración de los pigmentos y la formación de sedimentos duros. Borchi® Gen 911 provoca una rápida humectación y, por lo tanto, acorta el proceso de molienda. El molido extremadamente fino de los pigmentos también genera un mejor rendimiento del pigmento, más intensidad de color y mejor capacidad de recubrimiento. Se puede utilizar prácticamente en todas las lacas convencionales y pinturas al óleo y es especialmente apto para sistemas con pigmentos que tienden a crear sedimentos. Vea Menos | |
| Borchi® Set 134 | OMG Borchers GmbH | Borchi® Set 134 es un agente antisedimentación que también actúa como ajustador de viscosidad. Es apto para pinturas con disolventes e impide eficazmente la formación de sedimentos duros, incluso si se utilizan pigmentos pesados. Gracias a su acción antis...Vea Mas Borchi® Set 134 es un agente antisedimentación que también actúa como ajustador de viscosidad. Es apto para pinturas con disolventes e impide eficazmente la formación de sedimentos duros, incluso si se utilizan pigmentos pesados. Gracias a su acción antisedimentación, Borchi® Set 134 es un excelente agente de suspensión para pigmentos y masillas. También es altamente eficaz cuando se utiliza con pigmentos pesados y pulvimetales, lo que ofrece ventajas particulares en pinturas con alto contenido de zinc, por ejemplo. Este producto es un excelente agente tixotrópico y espesante para usar en pinturas a base de resinas epoxi de curado en frío, ésteres de resinas epoxi, resinas alquídicas, caucho clorado y ciclizado, sistemas DD, copolímeros y polímeros de resinas de vinilo. Vea Menos | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...Vea Mas CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. Vea Menos | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...Vea Mas CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. Vea Menos | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...Vea Mas CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. Vea Menos | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...Vea Mas CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. Vea Menos | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...Vea Mas CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. Vea Menos | |
| CIMA® 230-20 | CHEONGWOO CFC CO., LTD. | CIMA® 230-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seedin...Vea Mas CIMA® 230-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seeding formation, and does not influence inter-adhesive properties in system coatings. Applications include metallic and mica type general industrial coatings, high-build type heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy, and chlorinated rubber coatings. Vea Menos | |
| CIMA® 240-20 | CHEONGWOO CFC CO., LTD. | CIMA® 240-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seedin...Vea Mas CIMA® 240-20 is a nitrogen-contained anti-settling additive for organic solvent systems. This paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability and no seeding formation, and does not influence inter-adhesive properties in system coatings. Applications include metallic and mica type general industrial coatings, high-build type heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy, and chlorinated rubber coatings. Vea Menos | |
| CIMA® 290-20 | CHEONGWOO CFC CO., LTD. | CIMA® 290-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has s...Vea Mas CIMA® 290-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability with no seeding formation, and does not influence inter-adhesive properties in system coatings. It can be used for anti-settling and improving the orientation of metallic pigments. Other applications include automotive and refinishing coating systems, alkyd, acrylic, and melamine based general industrial coatings, alkyd and polyester modified heat resistant coatings, chlorinated rubber and wash primer coatings, and high-build type epoxy-based heavy-duty coatings. Vea Menos | |
| CIMA® 300-20 | CHEONGWOO CFC CO., LTD. | CIMA® 300-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has s...Vea Mas CIMA® 300-20 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability with no seeding formation, and does not influence inter-adhesive properties in system coatings. It can be used for anti-settling and improving the orientation of metallic pigments. Other applications include automotive and refinishing coating systems, alkyd, acrylic, and melamine based general industrial coatings, alkyd and polyester modified heat resistant coatings, chlorinated rubber and wash primer coatings, and high-build type epoxy-based heavy-duty coatings. Vea Menos | |
| CIMA® 420-20 | CHEONGWOO CFC CO., LTD. | CIMA® 420-20 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage, and dispersing stability. Applications include short, medium, and long oil alkyd coatings, alky...Vea Mas CIMA® 420-20 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage, and dispersing stability. Applications include short, medium, and long oil alkyd coatings, alkyd and acrylic high temperature baking systems, red lead, zinc chromate, and zinc rich paints, and heat resistant and wash primer coatings. Vea Menos | |
| CIMA®-1000 | CHEONGWOO CFC CO., LTD. | CIMA®-1000 is a high molecular fatty acid ester copolymer anti-settling and flow control additive for organic solvent systems. This soft paste has thixotropic properties in a wide range of coating systems, can be dispersed in a wide range of temperatures,...Vea Mas CIMA®-1000 is a high molecular fatty acid ester copolymer anti-settling and flow control additive for organic solvent systems. This soft paste has thixotropic properties in a wide range of coating systems, can be dispersed in a wide range of temperatures, and has storage stability with no seeding formation. It has no influence on inter-adhesive properties for system coatings, and improves the orientation of metallic pigments. It finds application in automotive and refinishing coating systems, in alkyd and acrylic melamine based general industrial coatings, in alkyd and polyester modified heat resistant coatings, in chlorinated rubber, wash primer, and metallic coatings and in high-build type epoxy-based heavy-duty coatings. Vea Menos | |
| CIMA®-1100 | CHEONGWOO CFC CO., LTD. | CIMA®-1100 is a synthetic wax-based additive for organic solvent systems. This milky white liquid increases surface stability, improves the orientation of mica and aluminum coatings, and has good storage stability. Applications include plastic coatings, a...Vea Mas CIMA®-1100 is a synthetic wax-based additive for organic solvent systems. This milky white liquid increases surface stability, improves the orientation of mica and aluminum coatings, and has good storage stability. Applications include plastic coatings, alkyd and acrylic melamine based general industrial coatings, and both acrylic and acrylic urethane coatings. Vea Menos | |
| CIMA®-1200 | CHEONGWOO CFC CO., LTD. | CIMA®-1200 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It has temperature and storage stability, and improves slip and scratch resistance. It finds application in pl...Vea Mas CIMA®-1200 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It has temperature and storage stability, and improves slip and scratch resistance. It finds application in plastic coatings, in alkyd and acrylic melamine based general industrial coatings, and in both acrylic and acrylic urethane coatings. Vea Menos | |
| CIMA®-1300 | CHEONGWOO CFC CO., LTD. | CIMA®-1300 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of mica and aluminum coatings. It increases surface stability, has good storage stability, and is suitable for polar coatings. It fi...Vea Mas CIMA®-1300 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of mica and aluminum coatings. It increases surface stability, has good storage stability, and is suitable for polar coatings. It finds application in plastic coatings, in solvent-based base coats and metallic top coats, and in automotive and refinishing coating systems. Vea Menos | |
| CIMA®-1310 | CHEONGWOO CFC CO., LTD. | CIMA®-1310 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It increases surface stability, has good storage stability, and improves slip and scratch resistance. It finds...Vea Mas CIMA®-1310 is a synthetic wax-based additive for organic solvent systems. This milky white liquid improves the orientation of aluminum coatings. It increases surface stability, has good storage stability, and improves slip and scratch resistance. It finds application in plastic coatings, in solvent-based base coats and metallic top coats, and in automotive refinishing coating systems. Vea Menos | |
| CIMA®-1400 | CHEONGWOO CFC CO., LTD. | CIMA®-1400 is a solution of a modified urea anti-settling and thixotropic additive for organic solvent systems. This brown, clear liquid is of the rheological type, and has flow control and anti-settling properties. It finds application in architectural, ...Vea Mas CIMA®-1400 is a solution of a modified urea anti-settling and thixotropic additive for organic solvent systems. This brown, clear liquid is of the rheological type, and has flow control and anti-settling properties. It finds application in architectural, industrial, and high-build type heavy-duty coatings. Vea Menos | |
| CIMA®-222 | CHEONGWOO CFC CO., LTD. | CIMA®-222 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has stor...Vea Mas CIMA®-222 is a nitrogen-contained anti-settling and flow control additive for organic solvent systems. This light yellow paste has thixotropic properties in a wide range of coating systems, and can be dispersed in a wide range of temperatures. It has storage stability, no seeding formation, and does not influence inter-adhesive properties in system coatings. Applications include metallic and mica type general industrial coatings, marine coatings and high-build type heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy, and chlorinated rubber coatings. Vea Menos | |
| CIMA®-310P | CHEONGWOO CFC CO., LTD. | CIMA®-310P is a high molecule ester compound additive for thixotropics in organic solvent systems. This white powder has thickening properties, improves dispersing properties, and does not influence inter-adhesive properties in system coatings. It can be ...Vea Mas CIMA®-310P is a high molecule ester compound additive for thixotropics in organic solvent systems. This white powder has thickening properties, improves dispersing properties, and does not influence inter-adhesive properties in system coatings. It can be dispersed in a wide range of temperatures and has anti-settling features as an amide-network structure. Applications include tar epoxy and tar urethane coatings, pure epoxy coatings, and alkyd and chlorinated rubber coatings. Vea Menos | |
| CIMA®-320P | CHEONGWOO CFC CO., LTD. | CIMA®-320P is a high molecule ester compound additive for anti-settling, anti-sagging, and thixotropic properties in organic solvent systems. This white powder is compatible, workable, and reduces VOC. It improves inter-adhesive properties and has no seed...Vea Mas CIMA®-320P is a high molecule ester compound additive for anti-settling, anti-sagging, and thixotropic properties in organic solvent systems. This white powder is compatible, workable, and reduces VOC. It improves inter-adhesive properties and has no seeding formation in system coatings. Applications include 2-component epoxy and urethane coatings, chlorinated rubber and vinyl modified resin coatings, and acrylic and alkyd resin coatings. Vea Menos | |
| CIMA®-440 | CHEONGWOO CFC CO., LTD. | CIMA®-440 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage. It finds application in short, medium, and long oil alkyd coatings, in alkyd and acrylic high temp...Vea Mas CIMA®-440 is a polyolefin wax-based dispersing, anti-settling, and anti-sagging additive. This hard paste features viscosity stability in long-term storage. It finds application in short, medium, and long oil alkyd coatings, in alkyd and acrylic high temperature baking systems, in red lead, zinc chromate, and zinc rich paints, in heat resistant and wash primer coatings, and in industrial, marine, and in high-build type heavy-duty coatings. Vea Menos | |
| CLAYTONE-40 | BYK 毕克 | TIXOGEL® VP es un agente tixotrópico y anti-sedimentación para sistemas de baja a media polaridad. Para lograr una eficiencia óptima, TIXOGEL® VP deberia dispersarse utilizando altas fuerzas de corte. | |
| CRAYVALLAC® 60P | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating sy...Vea Mas CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings. Vea Menos | Request Sample |
| CRAYVALLAC® 60X | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used i...Vea Mas CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. Vea Menos | Request Sample |
| CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...Vea Mas CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. Vea Menos | Request Sample |
| CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...Vea Mas CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. Vea Menos | Request Sample |
| CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
| CRAYVALLAC® LA-250 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-250 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to low polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
| CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...Vea Mas CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | Request Sample |
| CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...Vea Mas CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. Vea Menos | Request Sample |
| CRAYVALLAC® Optima | Arkema Rheology & Specialty Additives | CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...Vea Mas CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | Request Sample |
| CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...Vea Mas CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. Vea Menos | Request Sample |
| CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...Vea Mas CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. Vea Menos | Request Sample |
| CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...Vea Mas CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. Vea Menos | Request Sample |
| CRAYVALLAC® PA3 XAF 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres...Vea Mas CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | Request Sample |
| CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...Vea Mas CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. Vea Menos | Request Sample |
| CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...Vea Mas CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. Vea Menos | Request Sample |
| CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...Vea Mas CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. Vea Menos | Request Sample |
| CRAYVALLAC® PA5 XSR 25 | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...Vea Mas CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | Request Sample |
| CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydro...Vea Mas CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic providesa very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | Request Sample |
| CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...Vea Mas CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. Vea Menos | Request Sample |
| CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...Vea Mas CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | Request Sample |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...Vea Mas CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | Request Sample |
| CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...Vea Mas CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | Request Sample |
| CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...Vea Mas CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | Request Sample |
| CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...Vea Mas CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | Request Sample |
| DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 is used in non-aqueous coatings as an effective auxiliary solvent to fight settling and sagging. It is particularly useful in aromatic-free formulations. | Request Sample |
| DeuRheo 201 | Elementis 海名斯特殊化学 | DeuRheo 201 is a dispersed polyethylene wax slurry solvent, which is convenient and easy to disperse as a anti-settling agent. Best used in alkyd / melamine paint, acrylic / melamine paint, epoxy resin, vinyl polyurethane coating and spray paint. | Request Sample |
| DeuRheo 202 (20%) | Elementis 海名斯特殊化学 | DeuRheo 202 (20%) is a dispersible polyethylene wax paste anti-settling agent. It can effectively provide pigment sagging performance. | Request Sample |
| DeuRheo 209 | Elementis 海名斯特殊化学 | DeuRheo 209 is a special polyamide wax dispersion solvent, which prevents pigment or filler settling and sagging. | Request Sample |
| DeuRheo 211 | Elementis 海名斯特殊化学 | DeuRheo 211 is an aromatic free polyethylene wax dispersion anti-settling solvent, which can be handled easily and dispersed rapidly. | Request Sample |
| Dynasylan® 4144 | Evonik Operations GmbH, BL Silanes | Dynasylan ® 4144 ayuda a controlar las propiedades reológicas y reducir la viscosidad en sistemas poliméricos altamente cargados, como poliéster cargado de trihidróxido de aluminio o pastas SMC. A diferencia de la mayoría de los silanos organofuncional...Vea Mas Dynasylan ® 4144 ayuda a controlar las propiedades reológicas y reducir la viscosidad en sistemas poliméricos altamente cargados, como poliéster cargado de trihidróxido de aluminio o pastas SMC. A diferencia de la mayoría de los silanos organofuncionales, Dynasylan® 4144 ofrece una polaridad química sin ser químicamente reactivo. Como tal, el producto se utiliza como compatibilizador hidrofílico más que como promotor covalente de la adherencia. Dynasylan® 4144 permite viscosidades maleables a cargas de trihidróxido de aluminio superiores a 250 phr en resinas de poliéster no saturadas. Así mismo, Dynasylan® 4144 puede emplearse como agente anti-sedimentación para inhibidores de la corrosión en agentes refrigerantes a base de glicol. Como agente no acoplante de silano, Dynasylan® 4144 puede utilizarse como agente antifricción para modificar la superficie. Vea Menos | |
| E010 | Euchemy Industry Co., Ltd. | E010 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity, thixotropy, and improves flow and leveling to desired products. E010...Vea Mas E010 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity, thixotropy, and improves flow and leveling to desired products. E010 has applications in anti-corrosive paints, industrial paints, adhesives, putty and caulking compounds, primers, undercoats, fillers, foundry paints, and road sign paints. Vea Menos | |
| E027 | Euchemy Industry Co., Ltd. | E027 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for medium to high polarity organic systems and provides increased viscosity, and thixotropy. It also helps control sagging on vertical surfaces a...Vea Mas E027 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for medium to high polarity organic systems and provides increased viscosity, and thixotropy. It also helps control sagging on vertical surfaces and improves flow and leveling. E027 has applications in anti-corrosive paints, anti-fouling paints, marine paints, coil coating systems, adhesive compounds, foundry mould paints, gravure and flexographic printing inks, and industrial finishes. Vea Menos | |
| E038 | Euchemy Industry Co., Ltd. | E038 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems and provides increased viscosity and thixotropy. It also prevents pigment settling during storage, impr...Vea Mas E038 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems and provides increased viscosity and thixotropy. It also prevents pigment settling during storage, improves flow and leveling, and controls sagging on vertical surfaces. E038 has applications in heavy-duty anti-corrosive pains, anti-fouling paints, marine paints, powder coatings, coil coating systems, adhesives, foundry mould paints, and industrial finishes. Vea Menos | |
| E040 | Euchemy Industry Co., Ltd. | E040 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity and thixotropy. It also prevents pigment settling during storage, imp...Vea Mas E040 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides increased viscosity and thixotropy. It also prevents pigment settling during storage, improves flow and leveling, and controls sagging on vertical surfaces. E040 has applications in anti-corrosive paints, anti-fouling paints, marine paints, sealants, bituminous paints, adhesives, foundry mould paints, industrial primers, wash primers, and inks. Vea Menos | |
| E057 | Euchemy Industry Co., Ltd. | E057 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides increased viscosity and film thickness. It also prevents pigment settlin...Vea Mas E057 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides increased viscosity and film thickness. It also prevents pigment settling during storage, improves flow and leveling, and controls sagging on vertical surfaces and paints. E057 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, sealants, adhesives, and inks. Vea Menos | |
| E127 | Euchemy Industry Co., Ltd. | E127 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is ...Vea Mas E127 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E127 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, inks, sealants, adhesives, inorganic zinc-rich coatings, and vinyl-paints. Vea Menos | |
| E140 | Euchemy Industry Co., Ltd. | E140 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is ...Vea Mas E140 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an easy to incorporate additive for medium to high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E140 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, inks, sealants, adhesives, inorganic zinc-rich coatings, and vinyl-paints. Vea Menos | |
| E160 | Euchemy Industry Co., Ltd. | E160 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also...Vea Mas E160 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium and part of high polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E160 has applications in anti-corrosive paints, marine paints, automotive finishes/primers, industrial paints, inks, sealants, inorganic zinc-rich coatings, vinyl-paints, and adhesives. Vea Menos | |
| E210 | Euchemy Industry Co., Ltd. | E210 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective...Vea Mas E210 is an organic derivative of bentonite clay in the form of a light cream white powder. It is an additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. It is also a cost-effective replacement for conventional organic clay additives. E210 has applications in anti-corrosive paints, marine paints, automotive finishes, industrial paints, and inks. Vea Menos | |
| E217 | Euchemy Industry Co., Ltd. | E217 is an organic derivative of bentonite clay in the form of a very light cream white powder. It is an easily dispersible additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. E21...Vea Mas E217 is an organic derivative of bentonite clay in the form of a very light cream white powder. It is an easily dispersible additive for low to medium polarity solvent systems that provides stable viscosity build and controls sag and pigment settling. E217 has applications in anti-corrosive paints, automotive finishes, industrial paints, and inks. Vea Menos | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...Vea Mas EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. Vea Menos | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...Vea Mas EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. Vea Menos | |
| Efka® FA 4654 EM | BASF Formulation Additives 巴斯夫配方助剂 | Una aditivo de dispersión anti-asentamiento, anti-inundación y anti-flotación, para medios y revestimientos no polares, ayuda de gelificación para bentonitas orgánico-modificadas. | |
| EFKA® FA 4663 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...Vea Mas EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. Vea Menos | |
| EFKA® FA 4671 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...Vea Mas EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. Vea Menos | |
| EH | Euchemy Industry Co., Ltd. | EH is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EH has applications in water based coatings, emulsion p...Vea Mas EH is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EH has applications in water based coatings, emulsion paints, and water based inks. Vea Menos | |
| EP | Euchemy Industry Co., Ltd. | EP is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EP has applications in water based coatings, emulsion p...Vea Mas EP is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EP has applications in water based coatings, emulsion paints, and water based inks. Vea Menos | |
| EV | Euchemy Industry Co., Ltd. | EV is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EV has applications in water based coatings, emulsion p...Vea Mas EV is a purified smectite clay in the form of a light white powder. It is an additive for water-based systems that prevents pigment settling film reinforcement and no loss of thixotropy upon heating. EV has applications in water based coatings, emulsion paints, and water based inks. Vea Menos | |
| HL-150 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants...Vea Mas HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. Vea Menos | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...Vea Mas HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...Vea Mas HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...Vea Mas HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| LA THIX FB | Bernd Schwegmann GmbH & Co. KG | LA THIX FB is a rheological additive for solvent borne coating systems. It increases the viscosity of binders in solvent borne systems and causes pseudoplastic rheology. LA THIX FB acts only on binders containing ester-, hydroxyl- or other functional grou...Vea Mas LA THIX FB is a rheological additive for solvent borne coating systems. It increases the viscosity of binders in solvent borne systems and causes pseudoplastic rheology. LA THIX FB acts only on binders containing ester-, hydroxyl- or other functional groups, which are able to form hydrogen bonds. Polar solvents may have an influence on the effectiveness. This product is applied in thickening of all common solvent containing binder systems with polar groups. It is particularly suitable for high build systems, textured stoving paints, architectural- and DIY-paints. Vea Menos | |
| LX-1776 | Guangzhou Baohui Resin Co., Ltd. | LX-1776 is a wax dispersed in a pigment solvent appearing as a white pulp. This pigment anti-settling agent causes pigments to maintain even dispersion and parallel statues while representing the flashing effect and transition of color flop on metal subst...Vea Mas LX-1776 is a wax dispersed in a pigment solvent appearing as a white pulp. This pigment anti-settling agent causes pigments to maintain even dispersion and parallel statues while representing the flashing effect and transition of color flop on metal substrates. This product is commonly used in silver powder paints, repair paints, and industrial automobile paints. Vea Menos | |
| M-P-A® 1075 | Elementis 海名斯特殊化学 | M-P-A® 1075 is a non-reactive, non-fading, soft syrupy all-natural organic anti-settling agent. | Request Sample |
| M-P-A® 1078 X | Elementis 海名斯特殊化学 | M-P-A® 1078X is a highly efficient anti-settling and sag-control solvent. It is supplied as a soft paste dispersed in xylene. | Request Sample |
| M-P-A® 2000 X | Elementis 海名斯特殊化学 | M-P-A® 2000 X solvent is an easily incorporated, highly efficient organic anti-settling and sag control additive supplied as a pourable dispersion in xylene. | Request Sample |
