| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...Vea Mas Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. Vea Menos | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...Vea Mas Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...Vea Mas Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...Vea Mas Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...Vea Mas Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...Vea Mas Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...Vea Mas Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...Vea Mas Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. Vea Menos | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...Vea Mas Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. Vea Menos | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...Vea Mas Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. Vea Menos | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...Vea Mas Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. Vea Menos | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...Vea Mas Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. Vea Menos | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Acrylic Resin GA-300 | DKSH | Acrylic resin GA-300 is a highly functional glycidyl acrylic resin that can react with carboxyl and amine-functional compounds to produce durable coatings. It can work as a curing agent for carboxyl polyester resins in hybrid system, or as a performance e...Vea Mas Acrylic resin GA-300 is a highly functional glycidyl acrylic resin that can react with carboxyl and amine-functional compounds to produce durable coatings. It can work as a curing agent for carboxyl polyester resins in hybrid system, or as a performance enhancing additive at amounts of 1–5% in polyester-TGIC or hybrid powder coatings to increase crosslinking density, film hardness and chemical resistance. Acrylic resin GA-300 can also be used in specialty applications, such as polysiloxane based heat-resistant powder coatings. It provides stronger film integrity than TGIC as a curing agent for carboxyl polyester resins. Although the amount of Acrylic resin GA-300 in formulation depends on the equivalent weight of the polyester resin, its optimum level needs to be determined by actual laboratory evaluation. This product is available in Europe. Vea Menos | Request Sample |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...Vea Mas Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). Vea Menos | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...Vea Mas Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). Vea Menos | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...Vea Mas Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. Vea Menos | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...Vea Mas Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. Vea Menos | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...Vea Mas Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. Vea Menos | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...Vea Mas Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. Vea Menos | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...Vea Mas Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. Vea Menos | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...Vea Mas ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). Vea Menos | Request Sample |
| Aspartic Ester Resin Sunaspar SN220 | Yantai Suny Chem International Co., Ltd. | La resina de éster aspártico Sunaspar SN220 es una resina de éster aspártico sin solventes amina funcionales utilizada como componente reactivo para poliisocianatos. Se utiliza en adhesivos, revestimientos de superficies anticorrosivos en estructuras de a...Vea Mas La resina de éster aspártico Sunaspar SN220 es una resina de éster aspártico sin solventes amina funcionales utilizada como componente reactivo para poliisocianatos. Se utiliza en adhesivos, revestimientos de superficies anticorrosivos en estructuras de acero, oleoductos, protección anticorrosiva pesada y ligera, revestimiento de burbuja, revestimiento de aspas de ventiladores y materiales impermeabilizantes de hormigón. Vea Menos | |
| Aspartic Ester Resin Sunaspar SN520 | Yantai Suny Chem International Co., Ltd. | Sunaspar SN520 es una resina de éster aspártico sin solventes amina funcional utilizada como componente reactivo para poliisocianatos. Este producto tiene un alto contenido de sólidos, baja viscosidad y una excelente compatibilidad con la mayoría de las r...Vea Mas Sunaspar SN520 es una resina de éster aspártico sin solventes amina funcional utilizada como componente reactivo para poliisocianatos. Este producto tiene un alto contenido de sólidos, baja viscosidad y una excelente compatibilidad con la mayoría de las resinas de acrilato hidroxi. Ofrece excelentes propiedades de dureza, nivelación y brillo. También presenta buena resistencia a la intemperie, solventes, ácidos y álcalis y agua salina. Este producto es ampliamente utilizado en pinturas anticorrosivas, industriales y de automóviles. Vea Menos | |
| Atrelux UV3000 | Atcoat GmbH | Atrelux UV3000 is an epoxy acrylate resin with chemical resistance, high reactivity, scratch resistant films, hard, and flexible. Atrelux UV3000 has a solid of 100% and a viscosity of 400 to 600 dPas. | |
| Atrelux UV3300 | Atcoat GmbH | Atrelux UV3300 is an epoxy acrylate resin with scratch resistant films, chemical resistant, corrosion resistant, high reactivity, hard, and flexible. Atrelux UV3300 has a solid of 100% and a viscosity of 120 to 180 dPas. | |
| Atrelux UV6154/54 BA | Atcoat GmbH | Atrelux UV6154/54 BA is a hydroxyl group containing polyacrylic acrylate, curing with radiation (dual cure) and isocyanate, which is scratch resistant and non-adhesive for non-yellowing coatings. Atrelux UV6154/54 BA has a solid of 54% and a viscosity of ...Vea Mas Atrelux UV6154/54 BA is a hydroxyl group containing polyacrylic acrylate, curing with radiation (dual cure) and isocyanate, which is scratch resistant and non-adhesive for non-yellowing coatings. Atrelux UV6154/54 BA has a solid of 54% and a viscosity of 25 to 40 dPas. Vea Menos | |
| Atrepur 288/60 D4 | Atcoat GmbH | Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...Vea Mas Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 288/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 4000 to 6000 mPas. Vea Menos | |
| Atrepur 340/54 D4 | Atcoat GmbH | Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...Vea Mas Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 340/54 D4 has an oil length of 60, a solid of 54%, and a viscosity of 8000 to 12000 mPas. Vea Menos | |
| Atrepur 939/60 K6 | Atcoat GmbH | Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natura...Vea Mas Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 939/60 K6 has an oil length of 60, a solid of 60%, and a viscosity of 5.5 to 7.5 Pas. Vea Menos | |
| Atrepur HS 500/70 D4 | Atcoat GmbH | Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...Vea Mas Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 500/70 D4 has an oil length of 57, a solid of 70%, and a viscosity of 9000 to 12000 mPas. Vea Menos | |
| Atrepur HS 550/70 D4 | Atcoat GmbH | Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...Vea Mas Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 550/70 D4 has an oil length of 58, a solid of 70%, and a viscosity of 13000 to 17000 mPas. Vea Menos | |
| Atrepur HS 600/70 IPL | Atcoat GmbH | Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and...Vea Mas Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 600/70 IPL has an oil length of 63, a solid of 70%, and a viscosity of 5000 to 9000 mPas. Vea Menos | |
| Atrepur HS 700/70 D4 | Atcoat GmbH | Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...Vea Mas Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 700/70 D4 has an oil length of 60, a solid of 70%, and a viscosity of 9000 to 13000 mPas. Vea Menos | |
| Atrepur HS 800/80 D4 | Atcoat GmbH | Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...Vea Mas Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 800/80 D4 has an oil length of 60, a solid of 80%, and a viscosity of 4000 to 8000 mPas. Vea Menos | |
| Atrepur U1350/60 D4 | Atcoat GmbH | Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natura...Vea Mas Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U1350/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 40 to 60 dPas. Vea Menos | |
| Atrepur U41/65 BA | Atcoat GmbH | Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resin...Vea Mas Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U41/65 BA has an oil length of 41, a solid of 65%, and a viscosity of 17 to 33 dPas. Vea Menos | |
| Atrepur U600/60 D4 | Atcoat GmbH | Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd re...Vea Mas Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 26 to 35 dPas. Vea Menos | |
| Atrepur U600/60 K3 | Atcoat GmbH | Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins ...Vea Mas Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 K3 has an oil length of 60, a solid of 60%, and a viscosity of 25 to 35 dPas. Vea Menos | |
| Atrepur U600/HS70 IP J | Atcoat GmbH | Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, pl...Vea Mas Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/HS70 IP J has an oil length of 60, a solid of 70%, and a viscosity of 45 to 65 dPas. Vea Menos | |
| Atrepur U600HS/75 D4 | Atcoat GmbH | Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on nat...Vea Mas Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600HS/75 D4 has an oil length of 60, a solid of 75%, and a viscosity of 45 to 65 dPas. Vea Menos | |
| Atresal C17/60 D6 | Atcoat GmbH | Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. ...Vea Mas Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 120 s (50% DIN4). Vea Menos | |
| Atresal C19/60 D4 | Atcoat GmbH | Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...Vea Mas Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C19/60 D4 has an oil length of 66, a solid of 60%, and a viscosity of 4 to 7 Pas. Vea Menos | |
| Atresal C19/60 D6 | Atcoat GmbH | Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...Vea Mas Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 160 s (50% DIN4). Vea Menos | |
| Atresal K1552/50 KY | Atcoat GmbH | Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins...Vea Mas Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1552/50 KY has an oil length of 29, a solid of 50%, and a viscosity of 190 to 250 sec. Vea Menos | |
| Atresal K2253/75 SN | Atcoat GmbH | Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, ...Vea Mas Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2253/75 SN has an oil length of 41 a solid of 75%, and a viscosity of 90 to 125 dPas. Vea Menos | |
| Atresal K381/60 X | Atcoat GmbH | Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based o...Vea Mas Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K381/60 X has an oil length of 38 a solid of 60%, and a viscosity of 120 to 170 sec. Vea Menos | |
| Atresal L1878/60 K3 | Atcoat GmbH | Atresal L1878/60 K3 is a long oil alkyd resin, consisting of vegetable oil and white spirit, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and a...Vea Mas Atresal L1878/60 K3 is a long oil alkyd resin, consisting of vegetable oil and white spirit, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/60 K3 has an oil length of 61, a solid of 60%, and a viscosity of 90 to 120 sec. Vea Menos | |
| Atresal L1878/70 D4 | Atcoat GmbH | Atresal L1878/70 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and house paints with good gloss, color fastness, drying properties, and hardness. Atcoat alkyd r...Vea Mas Atresal L1878/70 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and house paints with good gloss, color fastness, drying properties, and hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/70 D4 has an oil length of 61, a solid of 70%, and a viscosity of 120 to 160 dPas. Vea Menos | |
| Atresal L1878/75 D6 | Atcoat GmbH | Atresal L1878/75 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, a...Vea Mas Atresal L1878/75 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/75 D6 has an oil length of 61, a solid of 75%, and a viscosity of 28 to 32 sec. Vea Menos | |
| Atresal L1878HS/85 D4 | Atcoat GmbH | Atresal L1878HS/85 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and high solid paints with good rubout, high hardness, and good drying properties. Atcoat alkyd...Vea Mas Atresal L1878HS/85 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and high solid paints with good rubout, high hardness, and good drying properties. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878HS/85 D4 has an oil length of 64, a solid of 85%, and a viscosity of 80 to 100 mPas. Vea Menos | |
| Atresal L2453/60 D6 | Atcoat GmbH | Atresal L2453/60 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of house paints and corrosion resistant paints and house paints, due to its compatibility with alkaline pigments, which is durabl...Vea Mas Atresal L2453/60 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of house paints and corrosion resistant paints and house paints, due to its compatibility with alkaline pigments, which is durable and has good process-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2453/60 D6 has an oil length of 64, a solid of 60%, and a viscosity of 120 to 150 sec. Vea Menos | |
| Atresal L2453/60 IPH | Atcoat GmbH | Atresal L2453/60 IPH is a long oil alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of house paints that is durable and has good process-ability, and is also recommended for corrosion resistant paints, due to its compa...Vea Mas Atresal L2453/60 IPH is a long oil alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of house paints that is durable and has good process-ability, and is also recommended for corrosion resistant paints, due to its compatibility with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2453/60 IPH has an oil length of 64, a solid of 60%, and a viscosity of 120 to 150 sec. Vea Menos | |
| Atresal L68/75 D6 | Atcoat GmbH | Atresal L68/75 D6 is a long oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75...Vea Mas Atresal L68/75 D6 is a long oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 D6 has an oil length of 68, a solid of 75%, and a viscosity of 35 to 45 sec. Vea Menos | |
| Atresal L68/75 IPH | Atcoat GmbH | Atresal L68/75 IPH is a long oil alkyd resin, consisting of fatty acid and isoparaffin, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 IPH ...Vea Mas Atresal L68/75 IPH is a long oil alkyd resin, consisting of fatty acid and isoparaffin, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 IPH has an oil length of 68, a solid of 75%, and a viscosity of 90 to 130 sec. Vea Menos | |
| Atresal LO 07 | Atcoat GmbH | Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat...Vea Mas Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 07 has an oil length of 82, a solid of 100%, and a viscosity of 3000 to 5000 mPas. Vea Menos | |
| Atresal LO 09 | Atcoat GmbH | Atresal LO 09 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for paints with good weathering, adhesion, drying properties, flexibility, and is also recommended for pigment preparations and low yellowing decorative enamels. Atco...Vea Mas Atresal LO 09 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for paints with good weathering, adhesion, drying properties, flexibility, and is also recommended for pigment preparations and low yellowing decorative enamels. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 09 has an oil length of 82, a solid of 100%, and a viscosity of 800 to 2000 mPas. Vea Menos | |
| Atresal LO33/70 D4 | Atcoat GmbH | Atresal LO33/70 D4 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, which has good gloss resistance, good adhesion, weather resistance, flexibility, and is suitable for exterior and interior use in coating systems for the mar...Vea Mas Atresal LO33/70 D4 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, which has good gloss resistance, good adhesion, weather resistance, flexibility, and is suitable for exterior and interior use in coating systems for the marine area and decorative paints with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO33/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 5000 to 9000 mPas. Vea Menos | |
| Atresal LO490/85 TPnB | Atcoat GmbH | Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low...Vea Mas Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low yellowing decorative paints, and wood stains. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO490/85 has an oil length of 65, a solid of 85%, and a viscosity of 1500 to 3000 mPas. Vea Menos | |
| Atresal LO95/60 K6 | Atcoat GmbH | Atresal LO95/60 K6 is a long oil alkyd resin, consisting of talloil fatty acid and white spirit, suitable for interior and exterior paints with low yellowing, good adhesion, weather resistance, gloss resistance, and flexibility. Atcoat alkyd resins are ba...Vea Mas Atresal LO95/60 K6 is a long oil alkyd resin, consisting of talloil fatty acid and white spirit, suitable for interior and exterior paints with low yellowing, good adhesion, weather resistance, gloss resistance, and flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO95/60 K6 has an oil length of 74, a solid of 60%, and a viscosity of 80 to 130 s (60% DIN4). Vea Menos | |
| Atresal MO 34/52 D4 | Atcoat GmbH | Atresal MO 34/52 D4 is medium oil alkyd resin, consisting of talloil fatty acid and aliphatic naphtha, suitable for low yellowing paints with good weather resistance, hardness, impact resistance, and flexibility. Atcoat alkyd resins are based on natural r...Vea Mas Atresal MO 34/52 D4 is medium oil alkyd resin, consisting of talloil fatty acid and aliphatic naphtha, suitable for low yellowing paints with good weather resistance, hardness, impact resistance, and flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal MO 34/52 D4 has an oil length of 55, a solid of 52%, and a viscosity of 6 to 9 Pas. Vea Menos | |
| Atresal SO 485/60 X | Atcoat GmbH | Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended...Vea Mas Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended for machinery enamels and industrial coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 485/60 X has an oil length of 33 a solid of 60%, and a viscosity of 3.8 to 4.8 Pas. Vea Menos | |
| Atresal SO 498/65 BA | Atcoat GmbH | Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and anima...Vea Mas Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 498/65 BA has an oil length of 42 a solid of 65%, and a viscosity of 1600 to 2600 mPas. Vea Menos | |
| Atresal ST 31/60 BA | Atcoat GmbH | Atresal ST 31/60 BA is a styrene modified alkyd resin, consisting of fatty acid, tung, and butylacetat, with good re-coat-ability, good water, chemical resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, p...Vea Mas Atresal ST 31/60 BA is a styrene modified alkyd resin, consisting of fatty acid, tung, and butylacetat, with good re-coat-ability, good water, chemical resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 BA has an oil length of 31, a solid of 60%, and a viscosity of 14.5 to 19.5 dPas. Vea Menos | |
| Atresal ST 31/60 SN | Atcoat GmbH | Atresal ST 31/60 SN is a styrene modified alkyd resin, consisting of high quality fatty acid, tung, and solvent naphta 150, suitable for the production of fast drying topcoats and base coats with good chemical and water resistance. Atcoat alkyd resins are...Vea Mas Atresal ST 31/60 SN is a styrene modified alkyd resin, consisting of high quality fatty acid, tung, and solvent naphta 150, suitable for the production of fast drying topcoats and base coats with good chemical and water resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 SN has an oil length of 31, a solid of 60%, and a viscosity of 17 to 27 dPas. Vea Menos | |
| Atresal ST 31/60 X | Atcoat GmbH | Atresal ST 31/60 X is a styrene modified alkyd resin, consisting of fatty acid and tung, with good recoatability, chemical resistance, water resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and a...Vea Mas Atresal ST 31/60 X is a styrene modified alkyd resin, consisting of fatty acid and tung, with good recoatability, chemical resistance, water resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 X has an oil length of 31, a solid of 60%, and a viscosity of 17 to 27 dPas. Vea Menos | |
| Atresil M52/85 D4 | Atcoat GmbH | Atresil M52/85 D4 is a silicone modified high solid medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, which is recommended for high weather proof outdoor paints. Atcoat alkyd resins are based on natural raw materials lik...Vea Mas Atresil M52/85 D4 is a silicone modified high solid medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, which is recommended for high weather proof outdoor paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresil M52/85 D4 has an oil length of 56, a solid of 85%, and a viscosity of 2 to 10 Pas. Vea Menos | |
| Atresin OD 2003 | Atcoat GmbH | Atresin OD 2003 is a saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, good weathering, and good mechanical properties. Since it does not contain any solvents, it is very environmental friendly, and it has ...Vea Mas Atresin OD 2003 is a saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, good weathering, and good mechanical properties. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 95: 5 with Primid XL552. Vea Menos | |
| Atresin SD 1108 | Atcoat GmbH | Atresin SD 1108 is an accelerated, saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, and good weathering. It is recommended for external use and since it does not contain any solvents, it is very environmen...Vea Mas Atresin SD 1108 is an accelerated, saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, and good weathering. It is recommended for external use and since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7 with Araldit PT910. Vea Menos | |
| Atresin SD 1118 | Atcoat GmbH | Atresin SD 1118 is a saturated, carboxylated, flexibilated powder polyester resin for external use with good gas oven stability, enhanced tribo properties, and good weathering. Since it does not contain any solvents, it is very environmental friendly, and...Vea Mas Atresin SD 1118 is a saturated, carboxylated, flexibilated powder polyester resin for external use with good gas oven stability, enhanced tribo properties, and good weathering. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7 with Araldit PT910. Vea Menos | |
| Atresin SD 1206 | Atcoat GmbH | Atresin SD 1206 is a saturated, carboxylated powder polyester resin for external use with good gas oven stability and good weathering. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7...Vea Mas Atresin SD 1206 is a saturated, carboxylated powder polyester resin for external use with good gas oven stability and good weathering. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7 to 94: 6 with Araldit PT910. Vea Menos | |
| Atrethix 0/60 K6 | Atcoat GmbH | Atrethix 0/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with a rate of 30 to 70% is recommended for paints with high anti-sagging, stability properties, and good brush-ability. Atcoat alkyd resins are based on nat...Vea Mas Atrethix 0/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with a rate of 30 to 70% is recommended for paints with high anti-sagging, stability properties, and good brush-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix 0/60 K6 has an oil length of 73 and a solid of 60%. Vea Menos | |
| Atrethix 1/60 K6 | Atcoat GmbH | Atrethix 1/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat a...Vea Mas Atrethix 1/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix 1/60 K6 has an oil length of 75 and a solid of 60%. Vea Menos | |
| Atrethix 3/60 IPL | Atcoat GmbH | Atrethix 3/60 IPL is a thix-alkyd resin, consisting of talloil fatty acid and isoparaffin, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd re...Vea Mas Atrethix 3/60 IPL is a thix-alkyd resin, consisting of talloil fatty acid and isoparaffin, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix 3/60 IPL has an oil length of 64 and a solid of 60%. Vea Menos | |
| Atrethix HS10/70 D6 | Atcoat GmbH | Atrethix HS10/70 D6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat a...Vea Mas Atrethix HS10/70 D6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix HS10/70 D6 has an oil length of 63 and a solid of 70%. Vea Menos | |
| Atrethix HS20/70 D6 | Atcoat GmbH | Atrethix HS20/70 D6 is a thix-alkyd resin, consisting of soya and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based...Vea Mas Atrethix HS20/70 D6 is a thix-alkyd resin, consisting of soya and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix HS20/70 D6 has an oil length of 63 and a solid of 70%. Vea Menos | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...Vea Mas BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. Vea Menos | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...Vea Mas BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. Vea Menos | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...Vea Mas BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. Vea Menos | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...Vea Mas BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. Vea Menos | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...Vea Mas BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. Vea Menos | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...Vea Mas BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. Vea Menos | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...Vea Mas Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. Vea Menos | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...Vea Mas Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. Vea Menos | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...Vea Mas CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. Vea Menos | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...Vea Mas CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. Vea Menos | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...Vea Mas CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. Vea Menos | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...Vea Mas CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. Vea Menos | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....Vea Mas CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. Vea Menos | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...Vea Mas CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. Vea Menos | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...Vea Mas CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. Vea Menos |
