| AQUACER® 513 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de las tintas de impresión acuosos. Emulsión no-iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 531 | BYK | Emulsión de cera, para mejorar las propiedades de superficie de pinturas y de tintas de impresión industriales, transmitidos por agua. Emulsión no-iónica basada en una cera modificada de polietileno. | |
| AQUACER® 552 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de la tintas de impresión, acuosos. Emulsión no iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 593 | BYK | Cera de emulsión para mejorar el anti-deslizamiento en los sistemas de pintura y de tintas de impresión transmitidos por agua. Emulsión no-iónica de una cera modificada de polipropileno. | |
| AQUAMAT® 263 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de la pintura y de las tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | Un 25% cera de polietileno oxidada dispersión en TRPGDA. Proporciona resistencia al deslizamientola y la abrasión de transferencia, manteniendo al mismo tiempo brillo y claridad. | |
| CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...Vea Mas CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Vea Menos | Request Sample |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. Está diseñado para proporcionar a los formuladores resistencia a la abrasión excelente y un buen deslizamiento. Se utiliza en recubrimientos de latas, industr...Vea Mas Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. Está diseñado para proporcionar a los formuladores resistencia a la abrasión excelente y un buen deslizamiento. Se utiliza en recubrimientos de latas, industrial, maderas y de bobinas. Vea Menos | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. FluoroSLIP 605 imparte propiedades superiores de frotación/desgaste, sin deslizamiento. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...Vea Mas HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. Vea Menos | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...Vea Mas HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. Vea Menos | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...Vea Mas HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. Vea Menos | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...Vea Mas HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. Vea Menos | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...Vea Mas HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. Vea Menos | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...Vea Mas HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. Vea Menos | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Una dispersión acuosa al 50% de una cera de polietileno de alta MW. Tiene control de deslizamiento y resistencia al roce, tiene un impacto moderado en brillo, tensioactivo no iónico para buena dispersabilidad/compatibilidad y estabilidad de almacenamiento...Vea Mas Una dispersión acuosa al 50% de una cera de polietileno de alta MW. Tiene control de deslizamiento y resistencia al roce, tiene un impacto moderado en brillo, tensioactivo no iónico para buena dispersabilidad/compatibilidad y estabilidad de almacenamiento excelente sin el uso de resinas o aglutinantes. Vea Menos | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| S-390-C (Spherical Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-390-C is a spherical synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder. | |
| S-394-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Un polvo de cera de polietileno con estrecho punto de fusión de temperatura de solubilidad reducida. Mejora la resistencia al rayado, repintado, la dureza y características de anti-bloqueo. Se utiliza en latas, la bobinas, el polvos, maderas, recubrimient...Vea Mas Un polvo de cera de polietileno con estrecho punto de fusión de temperatura de solubilidad reducida. Mejora la resistencia al rayado, repintado, la dureza y características de anti-bloqueo. Se utiliza en latas, la bobinas, el polvos, maderas, recubrimientos industriales y UV. Vea Menos | |
| S-394-SD4 (Spherical Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-394-SD4 is a spherical synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-395-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Un grado cristalino de polietileno con un punto de fusión alto que proporciona excelentes características de insolubilidad. Se utiliza en recubrimientos de latas, la bobinas, polvos, maderas, UV e industriales. | |
| S-395-SP5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Un grado cristalino de polietileno con un punto de fusión alto y la insolubilidad excelente. Ofrece mayor dureza, repintado, resistencia a la abrasión y las características anti-bloqueo. Se utiliza en los recubrimientos de la bobina, en polvo, madera e in...Vea Mas Un grado cristalino de polietileno con un punto de fusión alto y la insolubilidad excelente. Ofrece mayor dureza, repintado, resistencia a la abrasión y las características anti-bloqueo. Se utiliza en los recubrimientos de la bobina, en polvo, madera e industrial. Vea Menos | |
| S-413 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-413 is a synthetic wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for powder coatings, wood coatings, water-based, solvent-based and UV systems | |
| SCHWEGO® Flow 8057 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently als...Vea Mas SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently also impair the gloss. SCHWEGO® flow 8057 eliminates such defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. Vea Menos | |
| SCHWEGO® Flow 8058 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suita...Vea Mas SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suitable for solvent free water thinnable systems. Flow disturbances, like orange peel or ropiness are undesirable film characteristics, which frequently also impair the gloss. SCHWEGO® flow 8058 eliminates these surface defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. Vea Menos | |
| SCHWEGO® Mar 6561 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 6561 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6561 to UV coatings confers an improvement of mar and scratch resistance, increased r...Vea Mas SCHWEGO® Mar 6561 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6561 to UV coatings confers an improvement of mar and scratch resistance, increased resistance to blocking and as a consequence of the improved slip an increase in hardness. Additionally, the compatibility in UV systems is improved. The tendency to dirt retention is diminished and disposition to foaming is reduced. SCHWEGO® Mar 6561 does not affect gloss. Vea Menos | |
| SCHWEGO® Mar 6562 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 6562 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6562 to UV coatings confers an improvement of mar and scratch resistance, increased r...Vea Mas SCHWEGO® Mar 6562 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6562 to UV coatings confers an improvement of mar and scratch resistance, increased resistance to blocking and as a consequence of the improved slip an increase in hardness. Additionally, the compatibility in UV systems is improved and recoatability is provided. The tendency to dirt retention is diminished and disposition to foaming is reduced. This product does not affect gloss. Vea Menos | |
| SCHWEGO® Mar 8300 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8300 is a slip- and leveling additive for solvent borne coating systems. It is mainly used in conventional air drying and stoving finishes. Because of its composition SCHWEGO® Mar 8300 can be used in most binder systems. Binders containing hy...Vea Mas SCHWEGO® Mar 8300 is a slip- and leveling additive for solvent borne coating systems. It is mainly used in conventional air drying and stoving finishes. Because of its composition SCHWEGO® Mar 8300 can be used in most binder systems. Binders containing hydroxyl groups are not always compatible. The addition of SCHWEGO® mar 8300 to solvent borne coating systems improves scratch, mar and blocking resistance. Vea Menos | |
| SCHWEGO® Mar 8301 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8301 is a slip- and levelling additive for water-based coating systems. It is principally used in air drying and stoving water thinnable coatings. SCHWEGO® Mar 8301 can also show good effects in conventional coating systems. Because of its co...Vea Mas SCHWEGO® Mar 8301 is a slip- and levelling additive for water-based coating systems. It is principally used in air drying and stoving water thinnable coatings. SCHWEGO® Mar 8301 can also show good effects in conventional coating systems. Because of its composition, this product can be used in most binder systems. The addition of SCHWEGO® mar 8301 to water-based coating systems improves scratch, mar and blocking resistance. Vea Menos | |
| SCHWEGO® Mar 8304 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8304 is a slip- and leveling additive for solvent borne systems. The addition of SCHWEGO® mar 8304 to solvent borne coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced a...Vea Mas SCHWEGO® Mar 8304 is a slip- and leveling additive for solvent borne systems. The addition of SCHWEGO® mar 8304 to solvent borne coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced and gloss is preserved. This product improves as a secondary effect wetting and levelling. It is suitable for solvent borne systems as: air drying alkyds, alkyd/melamine combinations, polyurethanes, nitrocellulose, acid curing melamine and urea systems and oil-free polyesters Vea Menos | |
| SCHWEGO® Mar 8305 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8305 is a slip- and leveling additive for water-based systems. The addition of this product to water-based coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced and gloss ...Vea Mas SCHWEGO® Mar 8305 is a slip- and leveling additive for water-based systems. The addition of this product to water-based coating systems improves resistance against scratch, mar and blocking. The tendency of foaming and dirt retention is reduced and gloss is preserved. SCHWEGO® mar 8305 improves as a secondary effect wetting and levelling. This product is suitable for water-based systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems acid curing melamine and urea systems and oil-free polyesters. Vea Menos | |
| SIPERNAT® 800 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 800 is a precipitated synthetic sodium aluminosilicate that is manufactured in the USA. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 833 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 833 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 835 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic ...Vea Mas SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic binders. Vea Menos | Request Sample |
| SIPERNAT® 898 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 898 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-2 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 8.0 µm. SST®-2 is recommended for use in powder, water-based, solvent-based and UV coatings. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | Un polvo de PTFE micronizado. Polvos de la SST son insolubles, resistentes al calor, fácil de incorporar y altamente eficiente. Proporciona deslizamiento excelente y resistencia a la abrasión. Se utilizan en recubrimientos de latas, bobinas, industriales ...Vea Mas Un polvo de PTFE micronizado. Polvos de la SST son insolubles, resistentes al calor, fácil de incorporar y altamente eficiente. Proporciona deslizamiento excelente y resistencia a la abrasión. Se utilizan en recubrimientos de latas, bobinas, industriales y rayos UV. Vea Menos | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommeneded for use in powder, water-based, solvent-based ...Vea Mas SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommeneded for use in powder, water-based, solvent-based and UV coatings. Vea Menos | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | Un alto rendimiento PTFE con una distribución de tamaño de partículas estrechamente controlado para la dispersión fácil. Son insolubles, resistentes al calor y altamente eficiente. Proporciona deslizamiento óptimo y resistencia al roce/abrasión. Se utiliz...Vea Mas Un alto rendimiento PTFE con una distribución de tamaño de partículas estrechamente controlado para la dispersión fácil. Son insolubles, resistentes al calor y altamente eficiente. Proporciona deslizamiento óptimo y resistencia al roce/abrasión. Se utiliza en el recubrimientos de latas, bobinas, industriales y UV. Vea Menos | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | Un polvo muy fino, puro de PTFE con características de dispersabilidad excelentes. Es insoluble, a prueba de calor, fácil incorporar y muy eficiente. SST-5 proporciona resistencia excelente al deslizamiento y a la abrasión. Se utiliza en recubrimientos d...Vea Mas Un polvo muy fino, puro de PTFE con características de dispersabilidad excelentes. Es insoluble, a prueba de calor, fácil incorporar y muy eficiente. SST-5 proporciona resistencia excelente al deslizamiento y a la abrasión. Se utiliza en recubrimientos de latas, bobinas, industriales y UV. Vea Menos | |
| SST®-5D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and ...Vea Mas SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating systems. Vea Menos |
