| DOWSIL™ 100F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...Vea Mas Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. Vea Menos | |
| DOWSIL™ 102F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency t...Vea Mas Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. Vea Menos | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...Vea Mas DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. Vea Menos | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethyle...Vea Mas Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. Vea Menos | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...Vea Mas Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. Vea Menos | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbino...Vea Mas Dow Corning® 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. Vea Menos | |
| DOWSIL™ 163 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% activ...Vea Mas Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. Vea Menos | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether co...Vea Mas Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. Vea Menos | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...Vea Mas Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. Vea Menos | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and...Vea Mas Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. Vea Menos | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...Vea Mas DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. Vea Menos | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 27 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 27 Additive is a nonreactive silicone glycol surfactant with both silicone and organic characteristics. It is supplied as a 100% active fluid. This product may be incorporated into solvent, aqueous, solventless and energy curable systems. | |
| DOWSIL™ 29 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, r...Vea Mas Dow Corning® 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. Vea Menos | |
| DOWSIL™ 3 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, incr...Vea Mas Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. Vea Menos | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat f...Vea Mas Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. Vea Menos | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clea...Vea Mas Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. Vea Menos | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...Vea Mas DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. Vea Menos | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...Vea Mas Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. Vea Menos | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...Vea Mas Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. Vea Menos | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...Vea Mas Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. Vea Menos | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based sc...Vea Mas Dow Corning® 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. Vea Menos | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces crateri...Vea Mas Dow Corning® 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. Vea Menos | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...Vea Mas Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. Vea Menos | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...Vea Mas Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Vea Menos | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each ...Vea Mas Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone Vea Menos | |
| DOWSIL™ 62 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, w...Vea Mas Dow Corning® 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with low tendency to cause defects or affect coating gloss. Vea Menos | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effec...Vea Mas Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. Vea Menos | |
| DOWSIL™ 68 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system ...Vea Mas Dow Corning® 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. Vea Menos | |
| DOWSIL™ 700P Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze...Vea Mas Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. Vea Menos | |
| DOWSIL™ 71 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearan...Vea Mas Dow Corning® 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. Vea Menos | |
| DOWSIL™ 74 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear s...Vea Mas Dow Corning® 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. Vea Menos | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven...Vea Mas Dow Corning® 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. Vea Menos | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of ...Vea Mas Dow Corning® 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. Vea Menos | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling ag...Vea Mas Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. Vea Menos | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emuls...Vea Mas Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. Vea Menos | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...Vea Mas DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. Vea Menos | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styr...Vea Mas Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. Vea Menos | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...Vea Mas Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. Vea Menos | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...Vea Mas Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. Vea Menos | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coati...Vea Mas Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. Vea Menos | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent f...Vea Mas Dow Corning® Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for silicone resin based coatings, and can be used with alkyd coatings. Vea Menos | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| Dynoadd® D-960 | Dynoadd by Dynea | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...Vea Mas Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...Vea Mas Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...Vea Mas Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie en la formulación de los revestimientos, mejorando de esa manera la humectación de los sustratos. Se el...Vea Mas Dynoadd® F-1 es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie en la formulación de los revestimientos, mejorando de esa manera la humectación de los sustratos. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dynoadd® F-1 tiene una compatibilidad limitada pero equilibrada con la mayoría de las cadenas principales de las resinas y posee propiedades que evitan que se forme espuma en muchas formulaciones. Dynoadd® F-1 es una excelente opción para revestimientos multicapa. Dynoadd® F-1 se aplica en revestimientos industriales, revestimientos de carrete, OEM automotores, tintas de impresión y revestimientos de madera. El aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 es un fluido polimérico, no siliconado y aditivo anti-crater para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dy...Vea Mas Dynoadd® F-100 es un fluido polimérico, no siliconado y aditivo anti-crater para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dynoadd® F-100 es más compatible con las cadenas principales de las resinas que Dynoadd® F-1 y brinda un rendimiento mejorado en sistemas más polares. Dynoadd® F-100 se aplica en revestimientos de carrete, revestimientos de latas, OEM automotores y tintas de impresión. El aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Sin embargo, es más compatible en sistemas polares que Dynoadd® F-1. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 es un fluido polimérico no siliconado y agente nivelador. Reduce la tensión de las superficie en sistemas de revestimiento a base de solvente y no solvente. Elimina los defectos de superficie, como cráteres, cisuras y perforaciones. Dynoad...Vea Mas Dynoadd® F-101 es un fluido polimérico no siliconado y agente nivelador. Reduce la tensión de las superficie en sistemas de revestimiento a base de solvente y no solvente. Elimina los defectos de superficie, como cráteres, cisuras y perforaciones. Dynoadd® F-101 es más polar que Dynoadd® F-100. Dynoadd® F-101 brinda una protección mejorada ante defectos de la superficie en formulaciones curadas por radiación. Su mayor polaridad contribuye a lograr una buena humectación de los pigmentos y una mejor adherencia en algunos sistemas. Dynoadd® F-101 se aplica en revestimientos de carrete, OEM automotor, tinta de impresión y revestimientos curados por radiación. El aditivo es compatible con la mayoría de los sistemas de capas de base solvente y no solvente, independientemente de la composición química de la laca. Sin embargo, se ha comprobado que Dynoadd® F-101 tiene una ventaja extra en sistemas polares de laca debido a sus propiedades polares. Puede utilizarse en todas las capas en los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 es un poliester acrílico modificado no siliconado diseñado para fórmulas a base de solventes. Dado su peso molecular y composición química, Dynoadd® F-102 brinda un buen equilibrio de flujo y propiedades que previenen la formación de espuma...Vea Mas Dynoadd® F-102 es un poliester acrílico modificado no siliconado diseñado para fórmulas a base de solventes. Dado su peso molecular y composición química, Dynoadd® F-102 brinda un buen equilibrio de flujo y propiedades que previenen la formación de espuma en una amplia variedad de formulaciones. El agregado de Dynoadd® F-102 contribuirá de manera positiva a la humectación de los sutratos. Dynoadd® F-102 se aplica en revestimientos de carrete e industriales en general. Este aditivo tiene compatibilidad limitada en muchos sistemas de laca, por lo que contribuye a evitar la formación de espuma y a nivelar la superficie. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 es un fluido no siliconado y un aditivo nivelador para formulaciones de revestimientos transparentes con base solvente para automotores. Elimina los defectos de superficie como la piel de naranja, los cráteres y las protuberancias. Dynoadd®...Vea Mas Dynoadd® F-106 es un fluido no siliconado y un aditivo nivelador para formulaciones de revestimientos transparentes con base solvente para automotores. Elimina los defectos de superficie como la piel de naranja, los cráteres y las protuberancias. Dynoadd® F-106 mejora el fluido y la nivelación manteniendo una excelente transparencia. Dynoadd® F-106 se aplica como revestimiento transparente en automotores OEM. Vea Menos | Request Sample |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...Vea Mas Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. Vea Menos | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....Vea Mas Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. Vea Menos | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...Vea Mas Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Vea Menos | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 es un fluido polimérico, no siliconado y aditivo humectante para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Elimina defectos de superficie como los cráteres, cisuras y perforaciones. Dyn...Vea Mas Dynoadd® F-300 es un fluido polimérico, no siliconado y aditivo humectante para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Elimina defectos de superficie como los cráteres, cisuras y perforaciones. Dynoadd® F-300 es más compatible con las cadenas principales de las resinas que Dynoadd® F-3 y brinda un mejor rendimiento en sistemas más polares. Dynoadd® F-300 se aplica en revestimientos de latas y de carretes. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. No obstante, es más compatible en sistemas polares que Dynoadd® F-3. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg es Dynoadd® F-3 disuelto en butilglicol . Dynoadd® F-3Bg es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie, mejorando de esa manera la humectación de l...Vea Mas Dynoadd® F-3Bg es Dynoadd® F-3 disuelto en butilglicol . Dynoadd® F-3Bg es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie, mejorando de esa manera la humectación de los sustratos. Elimina los defectos de superficie como los cráteres, cisuras y perforaciones. Dynoadd® F-3Bg tiene compatibilidad limitada pero equilibrada con la mayoría de las cadenas principales de las resinas y posee propiedades que evitan que se forme espuma en muchas formulaciones. Dynoadd® F-3Bg es una excelente opción para revestimientos multicapa porque no interfiere en la adherencia intercapa. Dynoadd® F-3B se aplica en revestimientos de carrete y de latas. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento a base de solvente. Dynoadd® F-404 brinda un excelente flujo, nivelación y resistencia a los crátere...Vea Mas Dynoadd® F-404 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento a base de solvente. Dynoadd® F-404 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso de pintura en revestimientos aplicados mediante aerosol. El aditivo mejora significativamente la apariencia de la película en niveles bajos de dosificación. Mejora la calidad patinosa de la superficie y al mismo tiempo, incrementa el nivel de adición. Dynoadd® F-404 se aplica en la industria en general, en revestimientos para maderas y en OEM/ y acabados automotrices. Este aditivo es compatible con la mayoría de los sistemas de capas de base de solventes y no solventes, independientemente de la composición química de la laca. Vea Menos | Request Sample |
| Dynoadd® F-409 | Dynoadd by Dynea | Dynoadd® F-409 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento UV. Dynoadd® F-409 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso d...Vea Mas Dynoadd® F-409 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento UV. Dynoadd® F-409 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso de pintura en revestimientos aplicados mediante aerosol. El aditivo reduce significativamente la piel de naranja y mejora la apariencia de la película en niveles bajos de dosificación. Mejora la calidad patinosa de la superficie y al mismo tiempo, incrementa el nivel de adición. Dynoadd® F-409 se aplica en la industria en general y a revestimientos para maderas. Este aditivo es compatible con la mayoría de los sistemas con base de solventes y no solventes que se curan con radiación, independientemente de la composición química del oligómero. Vea Menos | Request Sample |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...Vea Mas Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. Vea Menos | Request Sample |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...Vea Mas Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. Vea Menos | Request Sample |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| Dynoadd® F-470 | Dynoadd by Dynea | Dynoadd® F-470 elimina el aire atrapado, las perforaciones y la espuma de la superficie. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-470 esta indicado para películas espesas como revestimientos para pisos, piezas de fund...Vea Mas Dynoadd® F-470 elimina el aire atrapado, las perforaciones y la espuma de la superficie. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-470 esta indicado para películas espesas como revestimientos para pisos, piezas de fundición y moldería basadas en epóxi 2K, PU y PE no saturado. Dynoadd® F-470 no reduce la transparencia y está recomendado para revestimientos claros. Dynoadd® F-470 contiene un nivel más bajo de polímero clorado. Vea Menos | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 es un poliester modificado por acrílico no siliconado para sistemas acuosos. Agregar Dynoadd® F-601 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-601 resuelve problemas de cráteres, perforaciones, ojos de pez e im...Vea Mas Dynoadd® F-601 es un poliester modificado por acrílico no siliconado para sistemas acuosos. Agregar Dynoadd® F-601 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-601 resuelve problemas de cráteres, perforaciones, ojos de pez e imperfecciones en la superficie. Dynoadd® F-601 se aplica en revestimientos industriales, de madera, revestimientos curados por radiación y automotrices. Este aditivo puede utilizarse en la mayoría de los sistemas de revestimientos acuosos independientemente de la composición química de la laca, siempre y cuando se agregue antes de disolverlo en agua. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-603 | Dynoadd by Dynea | Dynoadd® F-603 es un aditivo aniónico no siliconado para sistemas acuosos. Dynoadd® F-603 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-603 se aplica en revestimientos industriales, de madera, revestimientos curados por radiac...Vea Mas Dynoadd® F-603 es un aditivo aniónico no siliconado para sistemas acuosos. Dynoadd® F-603 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-603 se aplica en revestimientos industriales, de madera, revestimientos curados por radiación y automotrices. Este aditivo puede utilizarse en la mayoría de los sistemas de revestimientos acuosos, independientemente de la composición química de la laca. El efecto del aditivo en la estabilidad de la resina debe controlarse como parte del procedimiento de evaluación.Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...Vea Mas Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. Vea Menos | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...Vea Mas Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. Vea Menos | Request Sample |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B es un aditivo polimérico altamente efectivo, particularmente como agente de liberación de aire y anti burbujas. Controla la tensión de la superficie en sistemas de revestimientos a base de solvente. Agregado en pequeñas cantidades también ...Vea Mas Dynoadd® F-701B es un aditivo polimérico altamente efectivo, particularmente como agente de liberación de aire y anti burbujas. Controla la tensión de la superficie en sistemas de revestimientos a base de solvente. Agregado en pequeñas cantidades también pueden contribuir a mejorar el fluido y a reducir imperfecciones de la superficie como cráteres, piel de naranja y perforaciones. Este producto tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño, aún en revestimientos muy encerados. Dynoadd® F-701B puede utilizarse con aditivos fluidos Dynoadd®, en especial Dynoadd® F-101. Vea Menos | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 es un concentrado polimperico no siliconado, libre de COV, altamente efectivo para controlar la espuma. Es eficaz en formulaciones que se curan con radiación para prevenir la formación de espuma y es especialmente efectivo para liberar aire...Vea Mas Dynoadd® F-705 es un concentrado polimperico no siliconado, libre de COV, altamente efectivo para controlar la espuma. Es eficaz en formulaciones que se curan con radiación para prevenir la formación de espuma y es especialmente efectivo para liberar aire, reduciendo las burbujas y las perforaciones. Se puede utilizar como aditivo en cantidades de hasta el 0,1% para controlar la espuma y quitar el aire en revestimientos a base de solvente que están en contacto con alimentos. Dynoadd® F-705 se recomienda para prevenir la formación de espuma y la retención de aire en películas de revestimiento gruesas (UP, PUR, epoxy 2K). Dynoadd® F-705 se aplica en revestimientos de embalajes que están en contacto directo con alimentos, en revestimientos UV, para la industria en general y en revestimientos para pisos. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente y no solvente, independientemente de la composición química de la laca. Puede utilizarse en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 es un aditivo polimérico no siliconado, antiespuma, que libera el aire. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. No influye negativamente en la apariencia d...Vea Mas Dynoadd F-706 es un aditivo polimérico no siliconado, antiespuma, que libera el aire. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. No influye negativamente en la apariencia del revestimiento. Dynoadd® F-706 se aplica en revestimientos UV. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente y no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-707 controla la tensión de la superfic...Vea Mas Dynoadd® F-707 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-707 controla la tensión de la superficie en sistemas con base solvente y no solvente. En pequeñas cantidades puede contribuir también a mejorar el fluido y a reducir imperfecciones de la superficie, como cráteres y piel de naranja. Este producto tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño aún en revestimientos muy encerados. Dynoadd® F-707 puede utilizarse con aditivos fluidos Dynoadd®. Dynoadd® F-707 se aplica en revestimientos de carrete, PVdF, la industria en general y en revestimientos de embalajes. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente o no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superfic...Vea Mas Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superficie en sistemas con base solvente y no solvente. En pequeñas cantidades puede contribuir también a mejorar el fluido y a reducir imperfecciones de la superficie, como cráteres y piel de naranja. Dynoadd® F-708 tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño, aún en revestimientos muy encerados. Dynoadd® F-708 puede utilizarse con aditivos fluidos Dynoadd®, en particular Dynoadd® F-101. Dynoadd® F-708 se aplica en revestimientos de carrete, revestimientos PVdF, la industria en general y en revestimientos de embalajes. Se recomienda una dosis inicial de prueba de 0,05%. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente o no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combina propiedades altamente eficaces de control de la espuma con una compatibilidad optimizada que da como resultado una mejora en el fluido y en las propiedades de nivelación. Esta combinación hace que el aditivo sea especialmente efecti...Vea Mas Dynoadd® F-711 combina propiedades altamente eficaces de control de la espuma con una compatibilidad optimizada que da como resultado una mejora en el fluido y en las propiedades de nivelación. Esta combinación hace que el aditivo sea especialmente efectivo en la prevención y reducción de los efectos de formación de burbujas. Dynoadd® F-711 es efectivo en fórmulas con poliester o melamina alquídica, PU 2K y acrílico 2K. Se aplica en revestimientos para acabados automovilísticos, revestimientos de carrete y revestimientos industriales. Vea Menos | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente pa...Vea Mas Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente para películas espesas como revestimientos para pisos, piezas de fundición y moldería basadas en epóxi 2K, PU y PE no saturado. Dynoadd® F-713 puede reducir la transparencia de la película. Dynoadd® F-713 se aplica en fórmulas de epóxi 2K, PE no saturado y PU 1 y 2K. Vea Menos | Request Sample |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...Vea Mas Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. Vea Menos | Request Sample |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo de...Vea Mas Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo del fluido y la nivelación, este producto controla la tensión de la superficie y elimina los defectos de la superficie como por ejemplo la piel de naranja, los cráteres y las perforaciones. Dynoadd® F-800 también tiene un efecto positivo en la humectación de de los sustratos y los pigmentos. Vea Menos | Request Sample |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...Vea Mas Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. Vea Menos | Request Sample |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...Vea Mas Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. Vea Menos | Request Sample |
| Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando...Vea Mas Dynoadd® P-506 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-506 es de 6 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd® P-510® es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-510® es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-510 es de 10 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-515 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-515 es de 15 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-520 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-520 es de 20 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando...Vea Mas Dynoadd® P-530 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-530 es de 30 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 es un aditivo monodisperso, de partículas esféricas que genera películas con texturas especialmente finas y uniformes. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado gene...Vea Mas Dynoadd® P-540 es un aditivo monodisperso, de partículas esféricas que genera películas con texturas especialmente finas y uniformes. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-540 es de 40 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...Vea Mas Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. Vea Menos | Request Sample |
| XIAMETER® AFE-0700 Antifoam Emulsion | Dow Performance Silicones Paints, Inks and Coatings | XIAMETER® AFE-0700 Antifoam Emulsion is designed to provide optimum antifoam performance combined with good dilution stability and compatibility in various systems. It can be used in a wide variety of applications. This product is characterized by very go...Vea Mas XIAMETER® AFE-0700 Antifoam Emulsion is designed to provide optimum antifoam performance combined with good dilution stability and compatibility in various systems. It can be used in a wide variety of applications. This product is characterized by very good dilution stability in tap and demineralized water as well as excellent long term foam control persistence. Vea Menos | |
| XIAMETER® AFE-2210 Antifoam Emulsion | Dow Performance Silicones Paints, Inks and Coatings | XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product i...Vea Mas XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product is suitable for use in high gloss, semi-gloss and flat latex (emulsion) paints. Vea Menos |
