| Benzoin | Estron Chemical, Inc. | Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the ...Vea Mas Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the coating film. Vea Menos | |
| Butaflow BT-71 | Estron Chemical, Inc. | Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorp...Vea Mas Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorporated as a raw material during the premix stage of processing, and a laboratory investigation is recommended to optimize the concentration and processing conditions for a particular formulation. Vea Menos | |
| Dynoadd® D-960 | Dynoadd by Dynea | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...Vea Mas Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...Vea Mas Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...Vea Mas Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie en la formulación de los revestimientos, mejorando de esa manera la humectación de los sustratos. Se el...Vea Mas Dynoadd® F-1 es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie en la formulación de los revestimientos, mejorando de esa manera la humectación de los sustratos. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dynoadd® F-1 tiene una compatibilidad limitada pero equilibrada con la mayoría de las cadenas principales de las resinas y posee propiedades que evitan que se forme espuma en muchas formulaciones. Dynoadd® F-1 es una excelente opción para revestimientos multicapa. Dynoadd® F-1 se aplica en revestimientos industriales, revestimientos de carrete, OEM automotores, tintas de impresión y revestimientos de madera. El aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 es un fluido polimérico, no siliconado y aditivo anti-crater para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dy...Vea Mas Dynoadd® F-100 es un fluido polimérico, no siliconado y aditivo anti-crater para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Se eliminan defectos de superficie como cráteres, cisuras y perforaciones. Dynoadd® F-100 es más compatible con las cadenas principales de las resinas que Dynoadd® F-1 y brinda un rendimiento mejorado en sistemas más polares. Dynoadd® F-100 se aplica en revestimientos de carrete, revestimientos de latas, OEM automotores y tintas de impresión. El aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Sin embargo, es más compatible en sistemas polares que Dynoadd® F-1. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 es un fluido polimérico no siliconado y agente nivelador. Reduce la tensión de las superficie en sistemas de revestimiento a base de solvente y no solvente. Elimina los defectos de superficie, como cráteres, cisuras y perforaciones. Dynoad...Vea Mas Dynoadd® F-101 es un fluido polimérico no siliconado y agente nivelador. Reduce la tensión de las superficie en sistemas de revestimiento a base de solvente y no solvente. Elimina los defectos de superficie, como cráteres, cisuras y perforaciones. Dynoadd® F-101 es más polar que Dynoadd® F-100. Dynoadd® F-101 brinda una protección mejorada ante defectos de la superficie en formulaciones curadas por radiación. Su mayor polaridad contribuye a lograr una buena humectación de los pigmentos y una mejor adherencia en algunos sistemas. Dynoadd® F-101 se aplica en revestimientos de carrete, OEM automotor, tinta de impresión y revestimientos curados por radiación. El aditivo es compatible con la mayoría de los sistemas de capas de base solvente y no solvente, independientemente de la composición química de la laca. Sin embargo, se ha comprobado que Dynoadd® F-101 tiene una ventaja extra en sistemas polares de laca debido a sus propiedades polares. Puede utilizarse en todas las capas en los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 es un poliester acrílico modificado no siliconado diseñado para fórmulas a base de solventes. Dado su peso molecular y composición química, Dynoadd® F-102 brinda un buen equilibrio de flujo y propiedades que previenen la formación de espuma...Vea Mas Dynoadd® F-102 es un poliester acrílico modificado no siliconado diseñado para fórmulas a base de solventes. Dado su peso molecular y composición química, Dynoadd® F-102 brinda un buen equilibrio de flujo y propiedades que previenen la formación de espuma en una amplia variedad de formulaciones. El agregado de Dynoadd® F-102 contribuirá de manera positiva a la humectación de los sutratos. Dynoadd® F-102 se aplica en revestimientos de carrete e industriales en general. Este aditivo tiene compatibilidad limitada en muchos sistemas de laca, por lo que contribuye a evitar la formación de espuma y a nivelar la superficie. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 es un fluido no siliconado y un aditivo nivelador para formulaciones de revestimientos transparentes con base solvente para automotores. Elimina los defectos de superficie como la piel de naranja, los cráteres y las protuberancias. Dynoadd®...Vea Mas Dynoadd® F-106 es un fluido no siliconado y un aditivo nivelador para formulaciones de revestimientos transparentes con base solvente para automotores. Elimina los defectos de superficie como la piel de naranja, los cráteres y las protuberancias. Dynoadd® F-106 mejora el fluido y la nivelación manteniendo una excelente transparencia. Dynoadd® F-106 se aplica como revestimiento transparente en automotores OEM. Vea Menos | Request Sample |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...Vea Mas Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. Vea Menos | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....Vea Mas Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. Vea Menos | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...Vea Mas Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Vea Menos | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 es un fluido polimérico, no siliconado y aditivo humectante para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Elimina defectos de superficie como los cráteres, cisuras y perforaciones. Dyn...Vea Mas Dynoadd® F-300 es un fluido polimérico, no siliconado y aditivo humectante para revestimientos a base de solvente. Disminuye la tensión de la superficie en las formulaciones. Elimina defectos de superficie como los cráteres, cisuras y perforaciones. Dynoadd® F-300 es más compatible con las cadenas principales de las resinas que Dynoadd® F-3 y brinda un mejor rendimiento en sistemas más polares. Dynoadd® F-300 se aplica en revestimientos de latas y de carretes. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. No obstante, es más compatible en sistemas polares que Dynoadd® F-3. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg es Dynoadd® F-3 disuelto en butilglicol . Dynoadd® F-3Bg es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie, mejorando de esa manera la humectación de l...Vea Mas Dynoadd® F-3Bg es Dynoadd® F-3 disuelto en butilglicol . Dynoadd® F-3Bg es un fluido polimérico, no siliconado y aditivo anticráter para revestimientos a base de solvente. Disminuye la tensión de la superficie, mejorando de esa manera la humectación de los sustratos. Elimina los defectos de superficie como los cráteres, cisuras y perforaciones. Dynoadd® F-3Bg tiene compatibilidad limitada pero equilibrada con la mayoría de las cadenas principales de las resinas y posee propiedades que evitan que se forme espuma en muchas formulaciones. Dynoadd® F-3Bg es una excelente opción para revestimientos multicapa porque no interfiere en la adherencia intercapa. Dynoadd® F-3B se aplica en revestimientos de carrete y de latas. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente o no solvente, independientemente de la composición química de la laca. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento a base de solvente. Dynoadd® F-404 brinda un excelente flujo, nivelación y resistencia a los crátere...Vea Mas Dynoadd® F-404 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento a base de solvente. Dynoadd® F-404 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso de pintura en revestimientos aplicados mediante aerosol. El aditivo mejora significativamente la apariencia de la película en niveles bajos de dosificación. Mejora la calidad patinosa de la superficie y al mismo tiempo, incrementa el nivel de adición. Dynoadd® F-404 se aplica en la industria en general, en revestimientos para maderas y en OEM/ y acabados automotrices. Este aditivo es compatible con la mayoría de los sistemas de capas de base de solventes y no solventes, independientemente de la composición química de la laca. Vea Menos | Request Sample |
| Dynoadd® F-409 | Dynoadd by Dynea | Dynoadd® F-409 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento UV. Dynoadd® F-409 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso d...Vea Mas Dynoadd® F-409 es un aditivo modificado con siloxano a base de poliester que controla eficazmente la tensión de la superficie en sistemas de revestimiento UV. Dynoadd® F-409 brinda un excelente flujo, nivelación y resistencia a los cráteres en el exceso de pintura en revestimientos aplicados mediante aerosol. El aditivo reduce significativamente la piel de naranja y mejora la apariencia de la película en niveles bajos de dosificación. Mejora la calidad patinosa de la superficie y al mismo tiempo, incrementa el nivel de adición. Dynoadd® F-409 se aplica en la industria en general y a revestimientos para maderas. Este aditivo es compatible con la mayoría de los sistemas con base de solventes y no solventes que se curan con radiación, independientemente de la composición química del oligómero. Vea Menos | Request Sample |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...Vea Mas Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. Vea Menos | Request Sample |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...Vea Mas Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. Vea Menos | Request Sample |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| Dynoadd® F-470 | Dynoadd by Dynea | Dynoadd® F-470 elimina el aire atrapado, las perforaciones y la espuma de la superficie. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-470 esta indicado para películas espesas como revestimientos para pisos, piezas de fund...Vea Mas Dynoadd® F-470 elimina el aire atrapado, las perforaciones y la espuma de la superficie. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-470 esta indicado para películas espesas como revestimientos para pisos, piezas de fundición y moldería basadas en epóxi 2K, PU y PE no saturado. Dynoadd® F-470 no reduce la transparencia y está recomendado para revestimientos claros. Dynoadd® F-470 contiene un nivel más bajo de polímero clorado. Vea Menos | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 es un poliester modificado por acrílico no siliconado para sistemas acuosos. Agregar Dynoadd® F-601 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-601 resuelve problemas de cráteres, perforaciones, ojos de pez e im...Vea Mas Dynoadd® F-601 es un poliester modificado por acrílico no siliconado para sistemas acuosos. Agregar Dynoadd® F-601 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-601 resuelve problemas de cráteres, perforaciones, ojos de pez e imperfecciones en la superficie. Dynoadd® F-601 se aplica en revestimientos industriales, de madera, revestimientos curados por radiación y automotrices. Este aditivo puede utilizarse en la mayoría de los sistemas de revestimientos acuosos independientemente de la composición química de la laca, siempre y cuando se agregue antes de disolverlo en agua. Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-603 | Dynoadd by Dynea | Dynoadd® F-603 es un aditivo aniónico no siliconado para sistemas acuosos. Dynoadd® F-603 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-603 se aplica en revestimientos industriales, de madera, revestimientos curados por radiac...Vea Mas Dynoadd® F-603 es un aditivo aniónico no siliconado para sistemas acuosos. Dynoadd® F-603 mejora la humectación de sustratos, el flujo y la nivelación. Dynoadd® F-603 se aplica en revestimientos industriales, de madera, revestimientos curados por radiación y automotrices. Este aditivo puede utilizarse en la mayoría de los sistemas de revestimientos acuosos, independientemente de la composición química de la laca. El efecto del aditivo en la estabilidad de la resina debe controlarse como parte del procedimiento de evaluación.Se puede utilizar en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...Vea Mas Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. Vea Menos | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...Vea Mas Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. Vea Menos | Request Sample |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B es un aditivo polimérico altamente efectivo, particularmente como agente de liberación de aire y anti burbujas. Controla la tensión de la superficie en sistemas de revestimientos a base de solvente. Agregado en pequeñas cantidades también ...Vea Mas Dynoadd® F-701B es un aditivo polimérico altamente efectivo, particularmente como agente de liberación de aire y anti burbujas. Controla la tensión de la superficie en sistemas de revestimientos a base de solvente. Agregado en pequeñas cantidades también pueden contribuir a mejorar el fluido y a reducir imperfecciones de la superficie como cráteres, piel de naranja y perforaciones. Este producto tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño, aún en revestimientos muy encerados. Dynoadd® F-701B puede utilizarse con aditivos fluidos Dynoadd®, en especial Dynoadd® F-101. Vea Menos | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 es un concentrado polimperico no siliconado, libre de COV, altamente efectivo para controlar la espuma. Es eficaz en formulaciones que se curan con radiación para prevenir la formación de espuma y es especialmente efectivo para liberar aire...Vea Mas Dynoadd® F-705 es un concentrado polimperico no siliconado, libre de COV, altamente efectivo para controlar la espuma. Es eficaz en formulaciones que se curan con radiación para prevenir la formación de espuma y es especialmente efectivo para liberar aire, reduciendo las burbujas y las perforaciones. Se puede utilizar como aditivo en cantidades de hasta el 0,1% para controlar la espuma y quitar el aire en revestimientos a base de solvente que están en contacto con alimentos. Dynoadd® F-705 se recomienda para prevenir la formación de espuma y la retención de aire en películas de revestimiento gruesas (UP, PUR, epoxy 2K). Dynoadd® F-705 se aplica en revestimientos de embalajes que están en contacto directo con alimentos, en revestimientos UV, para la industria en general y en revestimientos para pisos. Este aditivo es compatible con la mayoría de los sistemas de revestimiento con base solvente y no solvente, independientemente de la composición química de la laca. Puede utilizarse en todas las capas de los sistemas multicapa. Vea Menos | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 es un aditivo polimérico no siliconado, antiespuma, que libera el aire. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. No influye negativamente en la apariencia d...Vea Mas Dynoadd F-706 es un aditivo polimérico no siliconado, antiespuma, que libera el aire. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. No influye negativamente en la apariencia del revestimiento. Dynoadd® F-706 se aplica en revestimientos UV. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente y no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-707 controla la tensión de la superfic...Vea Mas Dynoadd® F-707 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-707 controla la tensión de la superficie en sistemas con base solvente y no solvente. En pequeñas cantidades puede contribuir también a mejorar el fluido y a reducir imperfecciones de la superficie, como cráteres y piel de naranja. Este producto tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño aún en revestimientos muy encerados. Dynoadd® F-707 puede utilizarse con aditivos fluidos Dynoadd®. Dynoadd® F-707 se aplica en revestimientos de carrete, PVdF, la industria en general y en revestimientos de embalajes. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente o no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superfic...Vea Mas Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superficie en sistemas con base solvente y no solvente. En pequeñas cantidades puede contribuir también a mejorar el fluido y a reducir imperfecciones de la superficie, como cráteres y piel de naranja. Dynoadd® F-708 tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño, aún en revestimientos muy encerados. Dynoadd® F-708 puede utilizarse con aditivos fluidos Dynoadd®, en particular Dynoadd® F-101. Dynoadd® F-708 se aplica en revestimientos de carrete, revestimientos PVdF, la industria en general y en revestimientos de embalajes. Se recomienda una dosis inicial de prueba de 0,05%. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente o no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combina propiedades altamente eficaces de control de la espuma con una compatibilidad optimizada que da como resultado una mejora en el fluido y en las propiedades de nivelación. Esta combinación hace que el aditivo sea especialmente efecti...Vea Mas Dynoadd® F-711 combina propiedades altamente eficaces de control de la espuma con una compatibilidad optimizada que da como resultado una mejora en el fluido y en las propiedades de nivelación. Esta combinación hace que el aditivo sea especialmente efectivo en la prevención y reducción de los efectos de formación de burbujas. Dynoadd® F-711 es efectivo en fórmulas con poliester o melamina alquídica, PU 2K y acrílico 2K. Se aplica en revestimientos para acabados automovilísticos, revestimientos de carrete y revestimientos industriales. Vea Menos | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente pa...Vea Mas Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente para películas espesas como revestimientos para pisos, piezas de fundición y moldería basadas en epóxi 2K, PU y PE no saturado. Dynoadd® F-713 puede reducir la transparencia de la película. Dynoadd® F-713 se aplica en fórmulas de epóxi 2K, PE no saturado y PU 1 y 2K. Vea Menos | Request Sample |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...Vea Mas Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. Vea Menos | Request Sample |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo de...Vea Mas Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo del fluido y la nivelación, este producto controla la tensión de la superficie y elimina los defectos de la superficie como por ejemplo la piel de naranja, los cráteres y las perforaciones. Dynoadd® F-800 también tiene un efecto positivo en la humectación de de los sustratos y los pigmentos. Vea Menos | Request Sample |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...Vea Mas Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. Vea Menos | Request Sample |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...Vea Mas Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. Vea Menos | Request Sample |
| Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando...Vea Mas Dynoadd® P-506 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-506 es de 6 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd® P-510® es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-510® es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-510 es de 10 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-515 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-515 es de 15 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generand...Vea Mas Dynoadd® P-520 es un aditivo monodisperso, de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-520 es de 20 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando...Vea Mas Dynoadd® P-530 es un aditivo monodisperso de partículas esféricas que genera películas de textura especialmente fina y uniforme. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-530 es de 30 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 es un aditivo monodisperso, de partículas esféricas que genera películas con texturas especialmente finas y uniformes. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado gene...Vea Mas Dynoadd® P-540 es un aditivo monodisperso, de partículas esféricas que genera películas con texturas especialmente finas y uniformes. Las partículas tienen una distribución muy ajustada del tamaño, lo que asegura que cada una brinde el efecto deseado generando así tasas de adición más bajas que las de las tecnologías con las que compite. Este producto mejora la resistencia a los rasguños y realza de manera permanente la suavidad de la superficie. El tamaño de las partículas de Dynoadd® P-540 es de 40 micrones. Las partículas pueden utilizarse en fórmulas con base solvente, con base acuosa y en revestimientos que se curan con radiación. Las aplicaciones típicas son revestimientos de carrete, electrodomésticos, embalajes de cosméticos, teléfonos celulares, interiores de automotores, depósitos de maquinaria, revestimientos de madera y revestimientos ópticos. Vea Menos | Request Sample |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...Vea Mas Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. Vea Menos | Request Sample |
| Epoxy Hardener G-91 | Estron Chemical, Inc. | Epoxy Hardener G-91 is an imidazole type of curing agent for epoxy-based powder coatings. Coatings cured with Epoxy Hardener G-91 show excellent chemical resistance, mechanical properties, and the capability for low temperature cure. | |
| Epoxy Hardener G-92 | Estron Chemical, Inc. | Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings a...Vea Mas Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings are noted. Vea Menos | |
| Escat™ 110 | Estron Chemical, Inc. | Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy,...Vea Mas Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Escat™ 110's benefits include that it is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature. Vea Menos | |
| Escat™ 22 | Estron Chemical, Inc. | Escat™ 22 is a powder coating additive capable of improving the mechanical and solvent resistance properties. Escat™ 22 can be used in matte polyester powder coatings cured with the Isocryl matting hardeners EP-550, EP-560 and EP-570. | |
| Escat™ 50 | Estron Chemical, Inc. | Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction...Vea Mas Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems as well. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy and polyesters cured by GMA-functional acrylics. Polyester-TGIC and polyester-PT-910 reactions can also be accelerated. Escat™ 50 can reduce the cure temperature of a particular system or shorten the required bake time at a given cure temperature without sacrificing DOI or flow and leveling properties. Vea Menos | |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...Vea Mas Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. Vea Menos | |
| Grilonit® MA 68022 | Estron Chemical, Inc. | Grilonit® MA 68022 is a wax additive suitable for use in all types of powder coatings. It can be used for the formulation of satin and matte finishes. Powder coatings containing Grilonit® MA 68022 also exhibit improved scratch resistance. | |
| Grilonit® V 68-39 | Estron Chemical, Inc. | Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resi...Vea Mas Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resistance. Grilonit® V 68–39 is non-yellowing in powder coatings at temperatures between 150°C and 230°C. Due to the finely micron zed particle size, Grilonit® V 68–39 can be used as a post additive after the extrusion process for gloss control for example in dry blend powder coatings. Vea Menos | |
| Octaflow ST-70 | Estron Chemical, Inc. | Octaflow ST-70 is the tin-based liquid catalyst stannous octoate adsorbed onto a silica carrier. The additive may be used in both e-caprolactam blocked polyurethane powder coatings and the internally blocked uretdione systems. Octaflow ST-70 is incorporat...Vea Mas Octaflow ST-70 is the tin-based liquid catalyst stannous octoate adsorbed onto a silica carrier. The additive may be used in both e-caprolactam blocked polyurethane powder coatings and the internally blocked uretdione systems. Octaflow ST-70 is incorporated as a raw material during the premix stage of processing. Vea Menos | |
| Oxymelt® A-2 | Estron Chemical, Inc. | Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured...Vea Mas Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured in gas ovens. This degassing agent is well suited for polyester-HAA and polyurethane systems that emit volatiles during cure, and Oxymelt® A-2 is also appropriate for other traditional powder coating systems such as polyester-TGIC, hybrids, acrylics and epoxies. Vea Menos | |
| Oxymelt® A-4 | Estron Chemical, Inc. | Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powd...Vea Mas Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powder coatings cured in electric ovens. Oxymelt® A-4 can replace part or all of the benzoin in a powder coating formulation, and is non-yellowing, non-fuming and imparts superior anti-gassing properties. Vea Menos | |
| Oxymelt® A-6 | Estron Chemical, Inc. | Oxymelt® A-6 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also u...Vea Mas Oxymelt® A-6 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also useful in polyester-TGIC, hybrid, epoxy, and acrylic systems. Oxymelt® A-6 is not recommended, however, for use in polyurethane systems. Vea Menos | |
| Oxymelt® A-7 | Estron Chemical, Inc. | Oxymelt® A-7 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also u...Vea Mas Oxymelt® A-7 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also useful in polyester-TGIC, hybrid, epoxy, and acrylic systems. Oxymelt® A-7 is not recommended, however, for use in polyurethane systems. This product is experimental and subject to change. Vea Menos | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...Vea Mas Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. Vea Menos | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...Vea Mas Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. Vea Menos | |
| Resiflow® 2N | Estron Chemical, Inc. | Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in...Vea Mas Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in the pigment dispersion prior to letdown, Resiflow® 2N may alleviate pigment floating and foam formation. The product is suitable for use in acrylic, alkyd, epoxy, polyester, and other industrial coatings systems. Vea Menos | |
| Resiflow® 3N | Estron Chemical, Inc. | Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow...Vea Mas Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow® 3N is beneficial in alleviating brush and roller marks, picture framing, edge pull and sagging, as well as promoting a uniform, level surface. Vea Menos | |
| Resiflow® CP-77 | Estron Chemical, Inc. | Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the co...Vea Mas Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the contaminated flakes or powder, premixed, reextruded, and then further processed in the conventional manner. Bits or protrusions are unlikely to be remediated by reprocessing, and Resiflow® CP-77 may obviate that type of surface defect. Vea Menos | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...Vea Mas Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. Vea Menos | |
| Resiflow® L-3075 | Estron Chemical, Inc. | Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...Vea Mas Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. Vea Menos | |
| Resiflow® L-64F MBE-1 | Estron Chemical, Inc. | Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat fo...Vea Mas Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat formulations. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the epoxy resin and thus is very easily incorporated into the final formulation. Vea Menos | |
| Resiflow® L-64F MBP-10 | Estron Chemical, Inc. | Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into t...Vea Mas Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the polyester resin and thus is very easily incorporated into the final formulation. This product has been designed for a balance of optimal flow and clarity in PE-TGIC, PE-PT910 and PE-Primid clearcoat formulations. Vea Menos | |
| Resiflow® L-65F MBH-2 | Estron Chemical, Inc. | Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in pol...Vea Mas Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in polyester-urethane clearcoat formulations. Vea Menos | |
| Resiflow® L-65F-50 | Estron Chemical, Inc. | Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. ...Vea Mas Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F-50 also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and good anti-pop/solvent-popping characteristics. Vea Menos | |
| Resiflow® L-65F-50 BA | Estron Chemical, Inc. | Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-me...Vea Mas Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing leveling, Resiflow® L-65F-50 BA also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. Vea Menos | |
| Resiflow® L-66F MBP-10 | Estron Chemical, Inc. | Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clari...Vea Mas Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clarity in PE-TGIC clearcoat formulations. Vea Menos | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based...Vea Mas Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. Vea Menos | |
| Resiflow® LV MBP-10 | Estron Chemical, Inc. | Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder ...Vea Mas Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder coating formulations. Vea Menos | |
| Resiflow® P-37 | Estron Chemical, Inc. | Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other c...Vea Mas Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other components during extrusion, and this results in a uniform system. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-37 into powder coating formulations. Vea Menos | |
| Resiflow® PF-67 | Estron Chemical, Inc. | Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P...Vea Mas Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder systems such polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PH-240 | Estron Chemical, Inc. | Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat a...Vea Mas Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat adhesion and wetting on hydrophilic substrates such as sandblasted or unpolished metal. Resiflow® PH-240 can also improve or eliminate surface defects including orange peel, pinholes and craters. Vea Menos | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...Vea Mas Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. Vea Menos | |
| Resiflow® PL-200 | Estron Chemical, Inc. | Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its s...Vea Mas Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its suitability and reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PL-200A | Estron Chemical, Inc. | Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and E...Vea Mas Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PL-200A into pigmented powder coating formulations. Vea Menos | |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...Vea Mas Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Vea Menos | |
| Resiflow® PL-210 | Estron Chemical, Inc. | Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance a...Vea Mas Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple ...Vea Mas Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PV-60 | Estron Chemical, Inc. | Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such...Vea Mas Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 1-2% of Resiflow® PV-60 into powder coating formulations. Vea Menos | |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...Vea Mas Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® S | Estron Chemical, Inc. | Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...Vea Mas Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. Vea Menos | |
| SBS-1200 Wax | Estron Chemical, Inc. | SBS-1200 Wax is a general purpose, synthetic wax used in powder coatings to impart slip, improve mar resistance and lower gloss. Dosages of 0.5-1% can provide improved slip and surface appearance, as well as increased degassing capability. SBS-1200 Wax ca...Vea Mas SBS-1200 Wax is a general purpose, synthetic wax used in powder coatings to impart slip, improve mar resistance and lower gloss. Dosages of 0.5-1% can provide improved slip and surface appearance, as well as increased degassing capability. SBS-1200 Wax can be used in a wide array of binders such as polyesters, hybrids, polyurethanes and epoxies. Vea Menos | |
| SBS-1215 Wax | Estron Chemical, Inc. | SBS-1215 Wax is a special polyolefin-PTFE composition used in powder coatings to provide exceptional scratch, abrasion, mar and water resistance. Dosages of 0.5-1% are used to achieve optimal slip properties and mar resistance. It has a melting point of 1...Vea Mas SBS-1215 Wax is a special polyolefin-PTFE composition used in powder coatings to provide exceptional scratch, abrasion, mar and water resistance. Dosages of 0.5-1% are used to achieve optimal slip properties and mar resistance. It has a melting point of 100 to 108 degrees Celsius. SBS-1215 Wax imparts slip, lowers gloss and can be used in a wide array of binders such as polyesters, hybrids, polyurethanes and epoxies. Vea Menos |
