| Dispersogen® 145 | Clariant International Ltd. | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales coloran...Vea Mas Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales colorants in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. Vea Menos | |
| Dispersogen® 1728 | Clariant International Ltd. | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigme...Vea Mas Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigments. The advantages of Dispersogen® 1728 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. This slightly cloudy, viscous or pasty liquid is composed of an aqueous solution of a novolac derivative. Vea Menos | |
| Dispersogen® 2774 | Clariant International Ltd. | Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...Vea Mas Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. Vea Menos | |
| Dispersogen® 3169 | Clariant International Ltd. | Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing...Vea Mas Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing inks. It is suitable for inorganic pigments, carbon black and in particular for organic pigments. The advantages of Dispersing® Agent 3169 are high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. Vea Menos | |
| Dispersogen® 4387 | Clariant International Ltd. | Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable f...Vea Mas Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable for inorganic pigments (metal oxids), carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse. This brown, cloudy liquid is free of any additional biocide, and it is composed of a modified castor oil derivative. The advantages of Dispersogen® 4387 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. Vea Menos | |
| Dispersogen® AN 100 | Clariant International Ltd. | Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humec...Vea Mas Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humectant, and compatibilizer. Dispersogen® AN 100 is suitable for both inorganic and organic pigments. An additional humectant is not necessary. Vea Menos | |
| Dispersogen® AN 200 | Clariant International Ltd. | Dispersogen® AN 200 is an anionic dispersing agent for universal pigment preparations. It is able to disperse organic and inorganic pigments and suitable for label-free point-of-sales colorants and in-plant tinters. | |
| Dispersogen® C 4020 | Clariant International Ltd. | Dispersogen® C 4020 is a dispersing agent for inorganic pigments. | |
| Dispersogen® ECS | Clariant International Ltd. | Dispersogen® ECS is used as an anionic dispersing agent in universal pigment preparations (i.e. waterborne and solvent-borne). The product is able to disperse organic pigments and is suitable for label free in-plant tinters. | |
| Dispersogen® FA | Clariant International Ltd. | Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...Vea Mas Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. Vea Menos | |
| Dispersogen® FSE | Clariant International Ltd. | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...Vea Mas Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. Vea Menos | |
| Dispersogen® LEC | Clariant International Ltd. | Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the th...Vea Mas Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the the stability of colorants and the compatibility with waterborne and solvent-born coatings. Vea Menos | |
| Dispersogen® LFH | Clariant International Ltd. | Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...Vea Mas Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. Vea Menos | |
| Dispersogen® LFS | Clariant International Ltd. | Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an an...Vea Mas Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an anionic AP-free dispersing agent and used for water-based, solvent-based or water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. Vea Menos | |
| Dispersogen® LKS | Clariant International Ltd. | Dispersogen® LKS is a universal dispersing agent for organic and inorganic pigments. | |
| Dispersogen® MT 200 | Clariant International Ltd. | Dispersogen® MT 200 is a non-ionic dispersing agent based on renewable feedstock and with low VOC content. It is suitable for waterborne pigment preparations based on organic or inorganic pigments. | |
| Dispersogen® PCE | Clariant International Ltd. | Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chai...Vea Mas Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chain absorb onto the inorganic pigments and provide steric stabilization due to the polyethylene glycol ether side chains. This mechanism is sometimes superior to the electrostatic stabilization of polyacrylic acid salts or copolymers of acrylic acid and maleic acid resulting in higher dispersion stability. Vea Menos | |
| Dispersogen® PL 30 | Clariant International Ltd. | Dispersogen® PL 30 is an extremely efficient polymeric dispersing agent for waterborne in-plant tinters based on organic pigments. It is able to disperse very high pigment loads while still forming stable low viscous pigments pastes. | |
| Dispersogen® PL 40 | Clariant International Ltd. | Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, preven...Vea Mas Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, prevents sedimentation or syneresis and demonstrates good compatibility with resins and binders in waterborne coatings and inks. Vea Menos | |
| Dispersogen® PLF 100 | Clariant International Ltd. | Dispersogen® PLF 100 is a dispersing agent for organic and selected inorganic pigments in waterborne pigment preparations. It leads to good viscosity reduction, excellent colour strengths and storage stabilities. | |
| Dispersogen® PTS | Clariant International Ltd. | Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as...Vea Mas Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as emulsifier for polymer dispersions. This product is preferably suitable for organic pigments and carbon blacks and allows the production of stable, free flowing pigment preparations with low VOC – content and low odor. Vea Menos | |
| Dispersogen® SP Plus | Clariant International Ltd. | Dispersogen® SP Plus is a stabilizer and dispersant in organosilicate paints which contain up to 10% water glass (28% active potassium silicate). It improves the viscosity profile of the formulation and thereby helps to achieve application properties comp...Vea Mas Dispersogen® SP Plus is a stabilizer and dispersant in organosilicate paints which contain up to 10% water glass (28% active potassium silicate). It improves the viscosity profile of the formulation and thereby helps to achieve application properties comparable to those of dispersion paints. This product increases formulation options as the paints rheology profile can be further adjusted post-production by using additional rheology additives. Vea Menos | |
| Dispersogen® SPS | Clariant International Ltd. | Dispersogen® SPS is a quaternary ammonium compound used as a dispersing agent and stabilizer for silicate paints. It prevents precipitates of silicate in silicate paints, and prolongs the shelf life of silicate paints. | |
| Dispersogen® SPV | Clariant International Ltd. | Dispersogen® SPV is a dispersing agent and stabilizer for silicate paints. It controls the viscosity behaviour of silicate paints. | |
| Dispersogen® TAS | Clariant International Ltd. | Dispersogen® TAS is a universal dispersing agent for inorganic pigments. | |
| Dispersogen® UDN | Clariant International Ltd. | Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...Vea Mas Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. Vea Menos | |
| Dynoadd® D-960 | Dynoadd by Dynea | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...Vea Mas Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...Vea Mas Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...Vea Mas Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. Vea Menos | Request Sample |
| Emulsogen® EPA 073 | Clariant International Ltd. | Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...Vea Mas Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. Vea Menos | |
| Emulsogen® TS 100 | Clariant International Ltd. | Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any addition...Vea Mas Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any additional biocide. Emulsogen® TS 100 has a HLB value of about 10 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 100 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. It improves the compatibility of pigments and minerals with polymers and binders. This product also improves the shelf life and stability of emulsion paints. Vea Menos | |
| Genapol® ED 3060 | Clariant International Ltd. | Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...Vea Mas Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. Vea Menos | |
| Genapol® PF 20 | Clariant International Ltd. | Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product...Vea Mas Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product is a slightly cloudy, colorless liquid that is composed of block copolymer of propylene oxide and ethylene oxide, containing 20% w/w ethylene oxide. Genapol® PF 20 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. Vea Menos | |
| Genapol® PF 40 | Clariant International Ltd. | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...Vea Mas Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. Vea Menos | |
| Polyglycol AB/25-8 | Clariant International Ltd. | Polyglycol AB/25-8 is a colorless to slightly yellow, viscous, non-toxic liquid with a mild odor. It is a statistical copolymer of about 25 moles EO and 8 moles PO with allyl and butyl endcapping. | |
| Polyglycol AM 1100 | Clariant International Ltd. | Polyglycol AM 1100 is ethoxylated and end capped with an allyl and a methyl group. It is a waxy solid. | |
| Polyglycol AM 250 | Clariant International Ltd. | Polyglycol AM 250 is ethoxylated and end capped with an allyl and a methyl group. It is a low-viscous liquid. | |
| Polyglycol AM 350 | Clariant International Ltd. | Polyglycol AM 350 is ethoxylated and end capped with an allyl and a methyl group. It is a low-viscous liquid. | |
| Polyglycol AM 450 | Clariant International Ltd. | Polyglycol AM 450 is ethoxylated and end capped with an allyl and a methyl group. It is a low-viscous liquid. | |
| Polyglykol 200 LVC | Clariant International Ltd. | Polyglykol 200 LVC retards the drying of pigment pastes and forms a soluble film of the pigment preparation. Polyglykol 200 LVC prevents the clogging of the nozzles of tinting systems and metering machines. | |
| Polyglykol 3400 FL | Clariant International Ltd. | Polyglykol 3400 FL is a yellowish wax-like solid at room temperature. Polyglykol 3400 FL is soluble in water and polar organic solvents like acetone or methanol. Polyglykol 3400 FL is insoluble in pure hydrocarbons. | |
| Polyglykol 3400 PS | Clariant International Ltd. | Polyglykol 3400 PS is a yellowish wax-like solid at room temperature. Polyglykol 3400 PS is soluble in water and polar organic solvents like acetone or methanol. Polyglykol 3400 PS is insoluble in pure hydrocarbons. | |
| Polyglykol 9000 FL | Clariant International Ltd. | Polyglykol 9000 FL is a yellowish wax-like solid at room temperature. Polyglykol 9000 FL is soluble in water and polar organic solvents like acetone or methanol. Polyglykol 9000 FL is insoluble in pure hydrocarbons. | |
| Polyglykol 9000 S | Clariant International Ltd. | Polyglykol 9000 S is a yellowish wax-like solid at room temperature. Polyglykol 9000 S is soluble in water and polar organic solvents like acetone or methanol. Polyglykol 9000 S is insoluble in pure hydrocarbons. | |
| Polyglykol A 11/1800 | Clariant International Ltd. | Polyglykol A 11/1800 is a clear, yellowish liquid at room temperature. Polyglykol A 11/1800 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 11/1800 can be considered as high molecular alcohol with ...Vea Mas Polyglykol A 11/1800 is a clear, yellowish liquid at room temperature. Polyglykol A 11/1800 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 11/1800 can be considered as high molecular alcohol with an allylic function and therefore shows typical chemical reactions of alcohols as well as of the allylic group. Vea Menos | |
| Polyglykol A 32/550 | Clariant International Ltd. | Polyglykol A 32/550 is a clear, yellowish liquid at room temperature. Polyglykol A 32/550 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 32/550 can be considered as high molecular alcohol with an ...Vea Mas Polyglykol A 32/550 is a clear, yellowish liquid at room temperature. Polyglykol A 32/550 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 32/550 can be considered as high molecular alcohol with an allylic function and therefore shows typical chemical reactions of alcohols as well as of the allylic group. Vea Menos | |
| Polyglykol A 400 | Clariant International Ltd. | Polyglykol A 400 is a clear, yellowish liquid at room temperature. Polyglykol A 400 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 400 can be considered as high molecular alcohol with an allylic f...Vea Mas Polyglykol A 400 is a clear, yellowish liquid at room temperature. Polyglykol A 400 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 400 can be considered as high molecular alcohol with an allylic function and therefore shows typical chemical reactions of alcohols as well as of the allylic group. Vea Menos | |
| Polyglykol A 500 | Clariant International Ltd. | Polyglykol A 500 is a clear, yellowish liquid at room temperature. Polyglykol A 500 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 500 can be considered as high molecular alcohol with an allylic f...Vea Mas Polyglykol A 500 is a clear, yellowish liquid at room temperature. Polyglykol A 500 is neutral and soluble in water and commonly used organic solvents like acetone or methanol. Polyglykol A 500 can be considered as high molecular alcohol with an allylic function and therefore shows typical chemical reactions of alcohols as well as of the allylic group. Vea Menos | |
| Polyglykol AM 1100 | Clariant International Ltd. | Polyglykol AM 1100 is a waxy solid with weak odor. Like other polyethylene glycol allyl methyl ethers it is hydrophilic and biodegradable. Additional advantages include its compatibility with many materials, high heat resistance and low toxicity. With its...Vea Mas Polyglykol AM 1100 is a waxy solid with weak odor. Like other polyethylene glycol allyl methyl ethers it is hydrophilic and biodegradable. Additional advantages include its compatibility with many materials, high heat resistance and low toxicity. With its allyl group Polyglycol AM 1100 has the necessary requirement for many different chemical reactions. Additional reactions with silyl compounds can be carried out very easily, and under certain conditions other radical reactions or radical polymerizations are also possible. In this way, agrochemicals, plastics in the construction industry and other polymers can be given the properties of polyethylene glycol, particularly hydrophilic properties right through to water solubility. Applications in this area include paint additives, PU foam stabilization, manufacture of water-soluble or water-dispersible paints, silicone chemistry and hydrophilic modification of polymers in general. Other applications include their use in combination with nitrites for corrosion protection (as an additive to hydraulic cement and cement for steel-reinforced concrete), and in paper bleaching (as a delignifying agent). This product is also available as Polyglykol AM 1100, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 91.5% . Vea Menos | |
| Polyglykol G 500 | Clariant International Ltd. | Polyglykol G 500 is used as humectant for waterborne pigment preparations. Advantages include lower preparation viscosities compared with conventional linear polyglycols, low VOC-content, and little impact on wet scrub resistance at usual charges. This p...Vea Mas Polyglykol G 500 is used as humectant for waterborne pigment preparations. Advantages include lower preparation viscosities compared with conventional linear polyglycols, low VOC-content, and little impact on wet scrub resistance at usual charges. This product is also available as Polyglykol G 500 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. Vea Menos | |
| Polyglykol G 500 Terra | Clariant International Ltd. | Polyglykol G 500 Terra is used as humectant for waterborne pigment preparations. Advantages include lower preparation viscosities compared with conventional linear polyglycols, low VOC-content, and little impact on wet scrub resistance at usual charges. ...Vea Mas Polyglykol G 500 Terra is used as humectant for waterborne pigment preparations. Advantages include lower preparation viscosities compared with conventional linear polyglycols, low VOC-content, and little impact on wet scrub resistance at usual charges. Polyglykol G 500 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. Vea Menos | |
| Polyglykol M 1000 | Clariant International Ltd. | Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 970 - 1060g/mol. It is a waxy white to slightly yellowish solid at room temperature. Polyglykol M 1000 can be considered as high molecular alcohol and therefore displays t...Vea Mas Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 970 - 1060g/mol. It is a waxy white to slightly yellowish solid at room temperature. Polyglykol M 1000 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Vea Menos | |
| Polyglykol M 2000 FL | Clariant International Ltd. | Polyglykol M 2000 FL is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplie...Vea Mas Polyglykol M 2000 FL is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplied in a heated tank truck. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 2000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 98.7%. Vea Menos | |
| Polyglykol M 2000 FL Terra | Clariant International Ltd. | Polyglykol M 2000 FL Terra is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL Terra is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as ...Vea Mas Polyglykol M 2000 FL Terra is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL Terra is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplied in a heated tank truck. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 2000 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 98.7%. Vea Menos | |
| Polyglykol M 2000 S | Clariant International Ltd. | PolyglykolM 2000 S is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 S is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as flakes supplied...Vea Mas PolyglykolM 2000 S is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 S is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as flakes supplied in bags. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Vea Menos | |
| Polyglykol M 350 | Clariant International Ltd. | Polyglykol M 350 is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 can be considered as high mo...Vea Mas Polyglykol M 350 is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 350 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 91.3%. Vea Menos | |
| Polyglykol M 350 PU | Clariant International Ltd. | Polyglykol M 350 PU is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. For special applications (polyurethanes) a product marked Polyglykol M 350 PU with low alkali content (< 10 mg/kg) and low water content (< 0,1 %) is avail...Vea Mas Polyglykol M 350 PU is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. For special applications (polyurethanes) a product marked Polyglykol M 350 PU with low alkali content (< 10 mg/kg) and low water content (< 0,1 %) is available. The pH-value of this special type is between 3 – 5. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Vea Menos | |
| Polyglykol M 350 Terra | Clariant International Ltd. | Polyglykol M 350 Terra is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 Terra can be considere...Vea Mas Polyglykol M 350 Terra is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 Terra can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 350 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 91.3%. Vea Menos | |
| Polyglykol M 500 | Clariant International Ltd. | Polyglykol M 500 is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a mol...Vea Mas Polyglykol M 500 is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a molecular weight of 470 – 530g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 500 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI > 95.4%. Vea Menos | |
| Polyglykol M 500 PU | Clariant International Ltd. | Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 470 – 530g/mol. It is a clear neutral liquid at room temperature. This grade is used for special applications (polyurethanes) because of its low alkali content (< 10 mg/kg...Vea Mas Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 470 – 530g/mol. It is a clear neutral liquid at room temperature. This grade is used for special applications (polyurethanes) because of its low alkali content (< 10 mg/kg). The pH value of this special type is between 3 – 5. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Vea Menos | |
| Polyglykol M 500 Terra | Clariant International Ltd. | Polyglykol M 500 Terra is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has...Vea Mas Polyglykol M 500 Terra is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a molecular weight of 470 – 530g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 500 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 95.4%. Vea Menos | |
| Polyglykol M 750 | Clariant International Ltd. | Polyglykol M 750 is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 can be considered as high molecular alcohol and therefore displays typical chem...Vea Mas Polyglykol M 750 is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. It has a molecular weight of 720 – 780g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 750 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 96.9%. Vea Menos | |
| Polyglykol M 750 PU | Clariant International Ltd. | Polyglykol M 750 PU is a waxy white to slightly yellowish solid at room temperature. It is soluble in water and polar organic solvents like acetone and methanol. Polyglykol M 750 PU can act as endcap and hydrophilic component in polyurethanes and polyeste...Vea Mas Polyglykol M 750 PU is a waxy white to slightly yellowish solid at room temperature. It is soluble in water and polar organic solvents like acetone and methanol. Polyglykol M 750 PU can act as endcap and hydrophilic component in polyurethanes and polyesters. Vea Menos | |
| Polyglykol M 750 Terra | Clariant International Ltd. | Polyglykol M 750 Terra is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 Terra can be considered as high molecular alcohol and therefore displays ...Vea Mas Polyglykol M 750 Terra is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 Terra can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. It has a molecular weight of 720 – 780g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 750 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 96.9%. Vea Menos |
