| Benzoin | Estron Chemical, Inc. | Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the ...Vea Mas Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the coating film. Vea Menos | |
| Butaflow BT-71 | Estron Chemical, Inc. | Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorp...Vea Mas Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorporated as a raw material during the premix stage of processing, and a laboratory investigation is recommended to optimize the concentration and processing conditions for a particular formulation. Vea Menos | |
| CLiQFLOW® 661 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 661 is a white opaque liquid associative thickener used in aqueous clear and pigmented systems. The rheological additive helps to increase low and high shear viscosity, while providing a shear thinning flow behavior. It improves anti-settling be...Vea Mas CLiQFLOW® 661 is a white opaque liquid associative thickener used in aqueous clear and pigmented systems. The rheological additive helps to increase low and high shear viscosity, while providing a shear thinning flow behavior. It improves anti-settling behavior, brush drag, sag resistance and leveling properties resulting in better gloss and a more uniform paint film after application. The association with extenders and pigments makes it suitable for pigment concentrates and less dependant on other coating ingredients. Vea Menos | |
| CLiQFLOW® 661 VR | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 661 VR is a white opaque liquid polyurethane thickener for pigmented and aqueous clear systems. It increases low and high shear viscosity, while providing a shear thinning flow behavior to aqueous systems. The product improves sag resistance, an...Vea Mas CLiQFLOW® 661 VR is a white opaque liquid polyurethane thickener for pigmented and aqueous clear systems. It increases low and high shear viscosity, while providing a shear thinning flow behavior to aqueous systems. The product improves sag resistance, anti-settling behavior, brush drag of aqueous systems and leveling properties resulting in improved gloss and a more uniform paint film after application. It associates with binders and pigments in aqueous environments. Vea Menos | |
| CLiQFLOW® 675 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 675 is a white opaque liquid rheological additive for aqueous clear and pigmented systems. The polyurethane-based associative thickener boosts mid and high shear viscosity and provides a slightly shear thinning flow behavior to aqueous systems. ...Vea Mas CLiQFLOW® 675 is a white opaque liquid rheological additive for aqueous clear and pigmented systems. The polyurethane-based associative thickener boosts mid and high shear viscosity and provides a slightly shear thinning flow behavior to aqueous systems. It improves leveling properties, application behavior, brush drag and the overall quality of decorative paint systems that are thickened with acrylic thickeners or standard cellulosic. Vea Menos | |
| CLiQFLOW® 675 VR | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 675 VR is a polyurethane-based rheological additive in a white opaque liquid form that is used in aqueous clear and pigmented systems. It helps to increase mid and high shear viscosity and a shear thinning flow behavior. The product improves app...Vea Mas CLiQFLOW® 675 VR is a polyurethane-based rheological additive in a white opaque liquid form that is used in aqueous clear and pigmented systems. It helps to increase mid and high shear viscosity and a shear thinning flow behavior. The product improves application behavior, brush drag, leveling properties and the overall quality of decorative paint systems that are thickened with standard cellulosic or acrylic thickeners. Vea Menos | |
| CLiQFLOW® 680 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 680 is a white opaque liquid, free of VOC, APE and tin and is used as an associative thickener for aqueous clear and pigmented systems. The polyurethane thickener improves viscosity at high shear rates providing an almost Newtonian behavior flow...Vea Mas CLiQFLOW® 680 is a white opaque liquid, free of VOC, APE and tin and is used as an associative thickener for aqueous clear and pigmented systems. The polyurethane thickener improves viscosity at high shear rates providing an almost Newtonian behavior flow. It is recommended as a co-thickener in contemporary, environmentally-friendly high-value decorative latex paints. This is in order to improve leveling behavior, gloss, hiding power and brush drag, while reducing paint spattering during the roll application. It is also recommended as a single thickener in waterborne alkyd emulsions to provide an "alkyd-type" flow behavior in gloss or high gloss applications. Vea Menos | |
| CLiQFLOW® 681 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 681 is a white opaque liquid associative thickener that is VOC, APE and tin-free for use in aqueous systems. The polyurethane thickener improves viscosity at high shear levels providing a near Newtonian flow pattern in clear and pigmented system...Vea Mas CLiQFLOW® 681 is a white opaque liquid associative thickener that is VOC, APE and tin-free for use in aqueous systems. The polyurethane thickener improves viscosity at high shear levels providing a near Newtonian flow pattern in clear and pigmented systems. It is recommended as a single or co-thickener in modern, environmentally-friendly high-value paints and coatings.The additive also improves gloss, leveling behavior, hiding power, brush drag and reduces paint splattering during application. Vea Menos | |
| CLiQFLOW® 707 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 707 is a thixotropic additive with a hydrogenated caster oil-base for non to low-polar solvent-based systems and solvent-free systems. A micronized powder, It gives off a strong shear thinning flow behavior with good flow, leveling and sag resis...Vea Mas CLiQFLOW® 707 is a thixotropic additive with a hydrogenated caster oil-base for non to low-polar solvent-based systems and solvent-free systems. A micronized powder, It gives off a strong shear thinning flow behavior with good flow, leveling and sag resistance. The product is used in general industrial and heavy-duty non-aqueous paints as well as unsaturated polyester putties, adhesives and sealants. Vea Menos | |
| CLiQFLOW® 709 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 709 is a thixotropic additive with an amide-modified hydrogenated caster oil-base for non to mid polar solvent-based systems. A micronized powder, it shows a strong shear thinning flow behavior with good sag resistance, leveling and flow. The pr...Vea Mas CLiQFLOW® 709 is a thixotropic additive with an amide-modified hydrogenated caster oil-base for non to mid polar solvent-based systems. A micronized powder, it shows a strong shear thinning flow behavior with good sag resistance, leveling and flow. The product exhibits superior solvent tolerance to pure hydrogenated caster oil-based additives and is typically used in general industrial and heavy-duty non aqueous paints. Vea Menos | |
| CLiQFLOW® 755 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 755 is a white structured liquid anti-settling agent for non-aqueous pigmented systems. It improves elasticity in coating systems, can be combined with other rheological additives to achieve desired system flow properties and can also improve sa...Vea Mas CLiQFLOW® 755 is a white structured liquid anti-settling agent for non-aqueous pigmented systems. It improves elasticity in coating systems, can be combined with other rheological additives to achieve desired system flow properties and can also improve sag resistant properties in higher polar systems. Vea Menos | |
| CLiQSMART® 1011 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1011 is an opaque liquid defoamer with a mineral oil base that is used in aqueous systems. Defoaming efficiency is accelerated by modifying surface-active materials and low levels of polysiloxanes. It is applied to emulsion-based plasters, mid ...Vea Mas CLiQSMART® 1011 is an opaque liquid defoamer with a mineral oil base that is used in aqueous systems. Defoaming efficiency is accelerated by modifying surface-active materials and low levels of polysiloxanes. It is applied to emulsion-based plasters, mid to high pvc latex paints and high viscous adhesive systems. Vea Menos | |
| CLiQSMART® 1014 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varn...Vea Mas CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varnishes, wood stains, adhesives and printing inks. Vea Menos | |
| CLiQSMART® 1015 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1015 is a white mineral oil emulsion defoamer that is used in aqueous systems. With surfactants and silica, it is usually used in standard to mid and high pvc latex paints and emulsion-based plasters. It displays a good balance between compatib...Vea Mas CLiQSMART® 1015 is a white mineral oil emulsion defoamer that is used in aqueous systems. With surfactants and silica, it is usually used in standard to mid and high pvc latex paints and emulsion-based plasters. It displays a good balance between compatibility and defoaming efficiency and can be applied in the grinding and let-down stage of a manufacturing process. Vea Menos | |
| CLiQSMART® 1031 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1031 is a pale yellow liquid 100% polyglycol defoamer used in aqueous systems. It is free of silicone and mineral oil, shows high efficiency and is usually used in low to mid gloss-pigmented aqueous coatings, ink systems and adhesives. It can b...Vea Mas CLiQSMART® 1031 is a pale yellow liquid 100% polyglycol defoamer used in aqueous systems. It is free of silicone and mineral oil, shows high efficiency and is usually used in low to mid gloss-pigmented aqueous coatings, ink systems and adhesives. It can be used in the grinding and let-down phase of a manufacturing process. Vea Menos | |
| CLiQSMART® 1032 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1032 is a white polygycol emulsion defoamer for aqueous systems. Free of mineral oil and silicone, it displays high efficiency and system compatibility. This product is usually applied in low to high-gloss pigmented aqueous industrial or decora...Vea Mas CLiQSMART® 1032 is a white polygycol emulsion defoamer for aqueous systems. Free of mineral oil and silicone, it displays high efficiency and system compatibility. This product is usually applied in low to high-gloss pigmented aqueous industrial or decorative coatings, inks, and adhesives. Vea Menos | |
| CLiQSMART® 1051 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1051 is a white polysiloxane emulsion-based defoamer used in aqueous systems. It can be used in a variety of aqueous systems where it is usually applied in gloss pigmented and clear coatings, overprint varnishes and inks. It has good balance be...Vea Mas CLiQSMART® 1051 is a white polysiloxane emulsion-based defoamer used in aqueous systems. It can be used in a variety of aqueous systems where it is usually applied in gloss pigmented and clear coatings, overprint varnishes and inks. It has good balance between compatibility and defoaming efficiency and does not negatively impact on transparency and gloss. Vea Menos | |
| CLiQSMART® 1052 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1052 is a white polysiloxane emulsion defoamer that is usually applied in low to mid decorative latex paints and emulsion-based plasters. The product has effective balance between defoaming efficiency and compatibility. It can be used in the gr...Vea Mas CLiQSMART® 1052 is a white polysiloxane emulsion defoamer that is usually applied in low to mid decorative latex paints and emulsion-based plasters. The product has effective balance between defoaming efficiency and compatibility. It can be used in the grinding and let-down phase of a manufacturing process. Vea Menos | |
| CLiQSMART® 1061 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1061 takes the form of a slightly hazy liquid with a 100% polysiloxane base defoamer that is suitable for use in aqueous systems. It is usually used in industrial coating systems where it requires shear force for incorporation and is best added...Vea Mas CLiQSMART® 1061 takes the form of a slightly hazy liquid with a 100% polysiloxane base defoamer that is suitable for use in aqueous systems. It is usually used in industrial coating systems where it requires shear force for incorporation and is best added during the pigment grinding phase of a manufacturing process. The product is compatible with most binders used in industrial coating systems. Vea Menos | |
| CLiQSMART® 1062 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1062 is an off-white polysiloxane emulsion defoamer for aqueous systems. It is usually applied in matt to gloss-pigmented and clear aqueous systems that are used in decorative and industrial coatings. It displays good system compatibility and d...Vea Mas CLiQSMART® 1062 is an off-white polysiloxane emulsion defoamer for aqueous systems. It is usually applied in matt to gloss-pigmented and clear aqueous systems that are used in decorative and industrial coatings. It displays good system compatibility and does not negatively influence gloss and transparency of aqueous systems. Vea Menos | |
| CLiQSMART® 111 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 111 is a yellowish liquid silicone-free defoamer with mineral oil that makes it ideal for use in aqueous systems. It exhibits good storage stability and is almost VOC-free. Its multipurpose functions include uses in mid to high pvc decorative p...Vea Mas CLiQSMART® 111 is a yellowish liquid silicone-free defoamer with mineral oil that makes it ideal for use in aqueous systems. It exhibits good storage stability and is almost VOC-free. Its multipurpose functions include uses in mid to high pvc decorative paints, pigment concentrates, latex-based construction systems and adhesives to reduce production and application foam. Vea Menos | |
| CLiQSMART® 129 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 129 is a clear liquid VOC-free modified urea derivative that is used to extend the open-time of universal and aqueous pigment concentrates. The humectant prevents the concentrate from drying, an important criteria in tinting machines or during ...Vea Mas CLiQSMART® 129 is a clear liquid VOC-free modified urea derivative that is used to extend the open-time of universal and aqueous pigment concentrates. The humectant prevents the concentrate from drying, an important criteria in tinting machines or during storage. The product can adequately replace glycols in aqueous pigment concentrates. Vea Menos | |
| CLiQSMART® 129-30 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 129-30 is a clear liquid VOC-free humectant for aqueous and universal pigment concentrates with a modified urea derivative as its base. The humectant stops the concentrate from drying out. It replaces standard glycols in aqueous and universal p...Vea Mas CLiQSMART® 129-30 is a clear liquid VOC-free humectant for aqueous and universal pigment concentrates with a modified urea derivative as its base. The humectant stops the concentrate from drying out. It replaces standard glycols in aqueous and universal pigment concentrates and shows minimum influence on moisture resistance or film hardness. Vea Menos | |
| CLiQSMART® AF | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® AF is a clear liquid modified polysiloxane defoamer used in non-aqueous systems. It stops foam formation during production and application and performs well at low addition levels, resulting in the prevention of surface defects. It also display...Vea Mas CLiQSMART® AF is a clear liquid modified polysiloxane defoamer used in non-aqueous systems. It stops foam formation during production and application and performs well at low addition levels, resulting in the prevention of surface defects. It also displays good performance in a variety of non-aqueous systems based on binders like akyd-melamines, acrylics, polyurethanes, chlorinated rubber and epoxies. Vea Menos | |
| CLiQSMART® N-1 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® N-1 is a clear liquid, highly efficient amine-based neutralizer that is used in aqueous systems. A low-odor additive, it has good wetting properties as a co-dispersant. It is used in industrial and decorative paints to control the pH of the aqu...Vea Mas CLiQSMART® N-1 is a clear liquid, highly efficient amine-based neutralizer that is used in aqueous systems. A low-odor additive, it has good wetting properties as a co-dispersant. It is used in industrial and decorative paints to control the pH of the aqueous system. It also increases storage stability and does not cause pH drift during storage. Vea Menos | |
| CLiQSPERSE® 125 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 125 is a clear yellow liquid with a multipurpose wetting agent that has applications in aqueous systems. It is used in industrial and decorative base paints or pigment concentrates to improve tinting strength and colorant acceptance. Its multi...Vea Mas CLiQSPERSE® 125 is a clear yellow liquid with a multipurpose wetting agent that has applications in aqueous systems. It is used in industrial and decorative base paints or pigment concentrates to improve tinting strength and colorant acceptance. Its multifunctional properties allow it to enhance pigment wetting, reduce floating and flooding and prevent re-flocculation of pigments during storage. The product is used in standard latex paints to maintain viscosity on storage and to improve the overall stability of aqueous systems. Vea Menos | |
| CLiQSPERSE® 126 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 126 is a clear to hazy yellow liquid that functions as a multipurpose wetting agent for aqueous systems. It is an environment-friendly, labeling-free replacement to alkylphenol ethoxylate and is used to improve tinting strength and colorant ac...Vea Mas CLiQSPERSE® 126 is a clear to hazy yellow liquid that functions as a multipurpose wetting agent for aqueous systems. It is an environment-friendly, labeling-free replacement to alkylphenol ethoxylate and is used to improve tinting strength and colorant acceptance. It also reduces floating and flooding, enhances pigment wetting and prevents re-flocculation during storage. The product is also used in aqueous base paints. Vea Menos | |
| CLiQSPERSE® 128 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 128 is a clear liquid dispersing agent for pigment concentrates and aqueous coatings. Free of organic solvents, it is compatible with a variety of organic and inorganic pigments and most binders. It is used in base paints to improve compatibil...Vea Mas CLiQSPERSE® 128 is a clear liquid dispersing agent for pigment concentrates and aqueous coatings. Free of organic solvents, it is compatible with a variety of organic and inorganic pigments and most binders. It is used in base paints to improve compatibility and storage. The product is a highly efficient polymeric which prevents flocculation, floating and flooding, improves pigment stability and gloss development and allows color strength and acceptance to flourish. Vea Menos | |
| CLiQSPERSE® 130 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 130 is a clear liquid VOC-free dispersing agent for pigment concentrates and aqueous coatings. It shows compatibility with most binders and a variety of organic and inorganic pigments. It improves compatibility and storage in base paints, impr...Vea Mas CLiQSPERSE® 130 is a clear liquid VOC-free dispersing agent for pigment concentrates and aqueous coatings. It shows compatibility with most binders and a variety of organic and inorganic pigments. It improves compatibility and storage in base paints, improves gloss development and enhances maximum color strength and acceptance of aqueous pigment concentrates. It also prevents flocculation, flooding and floating in waterborne systems. Vea Menos | |
| CLiQSPERSE® 132 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 132 is a clear brown liquid dispersing agent for both aqueous and non-aqueous systems. With a fatty acid modified polyester base, it is used in alkyd-based and universal VOC compliant colorants. It facilitates color development and acceptance,...Vea Mas CLiQSPERSE® 132 is a clear brown liquid dispersing agent for both aqueous and non-aqueous systems. With a fatty acid modified polyester base, it is used in alkyd-based and universal VOC compliant colorants. It facilitates color development and acceptance, while allowing high pigment loads at low viscosity. The product acts as a universal dispersant in decorative coatings. Vea Menos | |
| CLiQSPERSE® 133 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 133 is a fatty acid-modified polyester dispersing agent for VOC-compliant universal coating applications. This product not only allows for maximum pigment load in pigment concentrates, but also provides color acceptance and development of colo...Vea Mas CLiQSPERSE® 133 is a fatty acid-modified polyester dispersing agent for VOC-compliant universal coating applications. This product not only allows for maximum pigment load in pigment concentrates, but also provides color acceptance and development of colorants in both non-aqueous and aqueous coatings. Vea Menos | |
| CLiQSPERSE® 152 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 152 is a clear brownish liquid polymeric/surfactant blend that acts as a dispersing and wetting agent in industrial and automotive coating systems. It is used as a resin-free pigment concentrate that prevents pigment flocculation, floating and...Vea Mas CLiQSPERSE® 152 is a clear brownish liquid polymeric/surfactant blend that acts as a dispersing and wetting agent in industrial and automotive coating systems. It is used as a resin-free pigment concentrate that prevents pigment flocculation, floating and flooding, while maximizing color acceptance and development of pigment concentrates. It functions in organic and inorganic pigments and comes recommended for use in wood coatings and primers. Vea Menos | |
| CLiQSPERSE® 162 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 162 is a clear yellowish liquid wetting agent for aqueous and non-aqueous systems. It is used in pigment concentrates and coatings to improve pigment/substrate wetting or colorant compatibility. An anionic surfactant, it improves storage stabi...Vea Mas CLiQSPERSE® 162 is a clear yellowish liquid wetting agent for aqueous and non-aqueous systems. It is used in pigment concentrates and coatings to improve pigment/substrate wetting or colorant compatibility. An anionic surfactant, it improves storage stability and color acceptance and development of pigment concentrates. It is considered an efficient compatibilizer, especially for non-aqueous alkyd paints. Vea Menos | |
| CLiQSPERSE® 172 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 172 is a yellowish liquid polycarboxylate-based dispersing agent for aqueous systems. The odorless low viscous sodium neutralised polymer is VOC-free, a consideration in modern decorative paint systems. It is recommended in aqueous latex paint...Vea Mas CLiQSPERSE® 172 is a yellowish liquid polycarboxylate-based dispersing agent for aqueous systems. The odorless low viscous sodium neutralised polymer is VOC-free, a consideration in modern decorative paint systems. It is recommended in aqueous latex paints, slurries based on extenders and in inorganic pigments and pigment concentrates. Vea Menos | |
| CLiQSPERSE® 175 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 175 is a yellowish liquid ammonium polycarboxylate-based dispersing agent used in aqueous systems. It is recommended for use in latex paints, pigment concentrates, construction systems and slurries with extenders or inorganic pigments. The pro...Vea Mas CLiQSPERSE® 175 is a yellowish liquid ammonium polycarboxylate-based dispersing agent used in aqueous systems. It is recommended for use in latex paints, pigment concentrates, construction systems and slurries with extenders or inorganic pigments. The product exhibits storage stability and has a low viscous mill-base. It also is stable against hydrolysis and does not promote foaming in the final system. Vea Menos | |
| CLiQSPERSE® BA | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® BA is a yellowish liquid dispersing agent that is used as pigment grinding resin to produce organic or inorganic pigment concentrates. The product can also be used for direct grinding of pigments into a coatings mill-base. It provides improved...Vea Mas CLiQSPERSE® BA is a yellowish liquid dispersing agent that is used as pigment grinding resin to produce organic or inorganic pigment concentrates. The product can also be used for direct grinding of pigments into a coatings mill-base. It provides improved color strength and paint stability, while also reducing grinding time and mill-base viscosity. While it is generally applicable in non-aqueous coating systems, it is especifically useful in paints and pigment concentrates, acrylic enamels, air-dry alkyd paints and alkyd-melamine baking systems. Vea Menos | |
| CLiQSPERSE® BF | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® BF is a modified polyurethane pigment dispersing agent with a high molecular weight. It is suitable for use in non-aqueous systems where it flourishes in terms of maximum color strength, color acceptance and gloss retention. This product helps...Vea Mas CLiQSPERSE® BF is a modified polyurethane pigment dispersing agent with a high molecular weight. It is suitable for use in non-aqueous systems where it flourishes in terms of maximum color strength, color acceptance and gloss retention. This product helps to stabilize pigments in paints concentrates, while preventing re-flocculation. It is also useful for direct grinding of pigments into a coatings mill-base. Vea Menos | |
| CLiQSPERSE® BG | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® BG is a yellowish liquid with an aromatic-free pigment dispersing agent suitable for use in non-aqueous systems where it provides good color acceptance, gloss retention and color strength. The product stabilizes pigments in paint concentrates ...Vea Mas CLiQSPERSE® BG is a yellowish liquid with an aromatic-free pigment dispersing agent suitable for use in non-aqueous systems where it provides good color acceptance, gloss retention and color strength. The product stabilizes pigments in paint concentrates and prevents re-flocculation. The modified polyurethane used in industrial systems, produces aromatic-free low viscous organic or inorganic pigment concentrates. Vea Menos | |
| CLiQSPERSE® BT | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® BT is a modified polyurethane dispersing agent for non-aqueous systems. It is considered an excellent product for direct grinding of pigments and extenders. Some of its properties include gloss retention, color acceptance and maximum color str...Vea Mas CLiQSPERSE® BT is a modified polyurethane dispersing agent for non-aqueous systems. It is considered an excellent product for direct grinding of pigments and extenders. Some of its properties include gloss retention, color acceptance and maximum color strength in various non-aqueous systems. It also stabilizes pigments in paints, prevents re-flocculation, provides a non-thixotropic low viscous mill-base and reduces grinding time. Vea Menos | |
| CLiQSPERSE® CA | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® CA is a clear brownish liquid that acts as a dispersing and wetting agent for low to medium polar non-aqueous systems. It is also a deflocculant which helps to improve gloss and color among various pigments. It also improves anti-settling beha...Vea Mas CLiQSPERSE® CA is a clear brownish liquid that acts as a dispersing and wetting agent for low to medium polar non-aqueous systems. It is also a deflocculant which helps to improve gloss and color among various pigments. It also improves anti-settling behavior while reducing millbase viscosity, flooding and pigment floating. The product is recommended as an organoclay activator to produce stable low viscous and pumpable non-aqueous pre-gels. Vea Menos | |
| CLiQSPERSE® CA-100 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® CA-100 is a brownish liquid that functions as a dispersing and wetting agent for decorative and industrial non-aqueous systems. It has active content of 100% salts of polycarbonic acid with polyamines that can be subject to direct grinding in ...Vea Mas CLiQSPERSE® CA-100 is a brownish liquid that functions as a dispersing and wetting agent for decorative and industrial non-aqueous systems. It has active content of 100% salts of polycarbonic acid with polyamines that can be subject to direct grinding in a coatings millbase. The product helps to improve color and gloss, anti-settling behavior and reduces millbase viscosity, flooding and pigment floating. A deflocculant, it is recommended for solvent-free protective coatings and high-solid systems. Vea Menos | |
| CLiQSPERSE® CG | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® CG appears as a clear brownish liquid that serves as a wetting agent for non-aqueous coatings and inks. It improves low shear viscosity, acts as a flocculant and is recommended as an organoclay activator. The product reduces pigment floating a...Vea Mas CLiQSPERSE® CG appears as a clear brownish liquid that serves as a wetting agent for non-aqueous coatings and inks. It improves low shear viscosity, acts as a flocculant and is recommended as an organoclay activator. The product reduces pigment floating and flooding in inks and paints and improves storage stability and anti-settling behavior of solvent systems. Vea Menos | |
| CLiQSPERSE® HA | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® HA is a yellowish liquid with a solvent-free dispersing agent suitable for non-aqueous and solvent-free industrial coating systems. It provides steric stabilization to extenders and pigments and reduces millbase viscosity. The product aids glo...Vea Mas CLiQSPERSE® HA is a yellowish liquid with a solvent-free dispersing agent suitable for non-aqueous and solvent-free industrial coating systems. It provides steric stabilization to extenders and pigments and reduces millbase viscosity. The product aids gloss development, hiding power, transparency and color strength. Vea Menos | |
| Epoxy Hardener G-91 | Estron Chemical, Inc. | Epoxy Hardener G-91 is an imidazole type of curing agent for epoxy-based powder coatings. Coatings cured with Epoxy Hardener G-91 show excellent chemical resistance, mechanical properties, and the capability for low temperature cure. | |
| Epoxy Hardener G-92 | Estron Chemical, Inc. | Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings a...Vea Mas Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings are noted. Vea Menos | |
| Escat™ 110 | Estron Chemical, Inc. | Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy,...Vea Mas Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Escat™ 110's benefits include that it is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature. Vea Menos | |
| Escat™ 22 | Estron Chemical, Inc. | Escat™ 22 is a powder coating additive capable of improving the mechanical and solvent resistance properties. Escat™ 22 can be used in matte polyester powder coatings cured with the Isocryl matting hardeners EP-550, EP-560 and EP-570. | |
| Escat™ 50 | Estron Chemical, Inc. | Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction...Vea Mas Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems as well. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy and polyesters cured by GMA-functional acrylics. Polyester-TGIC and polyester-PT-910 reactions can also be accelerated. Escat™ 50 can reduce the cure temperature of a particular system or shorten the required bake time at a given cure temperature without sacrificing DOI or flow and leveling properties. Vea Menos | |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...Vea Mas Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. Vea Menos | |
| Grilonit® MA 68022 | Estron Chemical, Inc. | Grilonit® MA 68022 is a wax additive suitable for use in all types of powder coatings. It can be used for the formulation of satin and matte finishes. Powder coatings containing Grilonit® MA 68022 also exhibit improved scratch resistance. | |
| Grilonit® V 68-39 | Estron Chemical, Inc. | Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resi...Vea Mas Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resistance. Grilonit® V 68–39 is non-yellowing in powder coatings at temperatures between 150°C and 230°C. Due to the finely micron zed particle size, Grilonit® V 68–39 can be used as a post additive after the extrusion process for gloss control for example in dry blend powder coatings. Vea Menos | |
| Octaflow ST-70 | Estron Chemical, Inc. | Octaflow ST-70 is the tin-based liquid catalyst stannous octoate adsorbed onto a silica carrier. The additive may be used in both e-caprolactam blocked polyurethane powder coatings and the internally blocked uretdione systems. Octaflow ST-70 is incorporat...Vea Mas Octaflow ST-70 is the tin-based liquid catalyst stannous octoate adsorbed onto a silica carrier. The additive may be used in both e-caprolactam blocked polyurethane powder coatings and the internally blocked uretdione systems. Octaflow ST-70 is incorporated as a raw material during the premix stage of processing. Vea Menos | |
| Oxymelt® A-2 | Estron Chemical, Inc. | Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured...Vea Mas Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured in gas ovens. This degassing agent is well suited for polyester-HAA and polyurethane systems that emit volatiles during cure, and Oxymelt® A-2 is also appropriate for other traditional powder coating systems such as polyester-TGIC, hybrids, acrylics and epoxies. Vea Menos | |
| Oxymelt® A-4 | Estron Chemical, Inc. | Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powd...Vea Mas Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powder coatings cured in electric ovens. Oxymelt® A-4 can replace part or all of the benzoin in a powder coating formulation, and is non-yellowing, non-fuming and imparts superior anti-gassing properties. Vea Menos | |
| Oxymelt® A-6 | Estron Chemical, Inc. | Oxymelt® A-6 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also u...Vea Mas Oxymelt® A-6 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also useful in polyester-TGIC, hybrid, epoxy, and acrylic systems. Oxymelt® A-6 is not recommended, however, for use in polyurethane systems. Vea Menos | |
| Oxymelt® A-7 | Estron Chemical, Inc. | Oxymelt® A-7 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also u...Vea Mas Oxymelt® A-7 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also useful in polyester-TGIC, hybrid, epoxy, and acrylic systems. Oxymelt® A-7 is not recommended, however, for use in polyurethane systems. This product is experimental and subject to change. Vea Menos | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...Vea Mas Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. Vea Menos | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...Vea Mas Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. Vea Menos | |
| Resiflow® 2N | Estron Chemical, Inc. | Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in...Vea Mas Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in the pigment dispersion prior to letdown, Resiflow® 2N may alleviate pigment floating and foam formation. The product is suitable for use in acrylic, alkyd, epoxy, polyester, and other industrial coatings systems. Vea Menos | |
| Resiflow® 3N | Estron Chemical, Inc. | Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow...Vea Mas Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow® 3N is beneficial in alleviating brush and roller marks, picture framing, edge pull and sagging, as well as promoting a uniform, level surface. Vea Menos | |
| Resiflow® CP-77 | Estron Chemical, Inc. | Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the co...Vea Mas Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the contaminated flakes or powder, premixed, reextruded, and then further processed in the conventional manner. Bits or protrusions are unlikely to be remediated by reprocessing, and Resiflow® CP-77 may obviate that type of surface defect. Vea Menos | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...Vea Mas Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. Vea Menos | |
| Resiflow® L-3075 | Estron Chemical, Inc. | Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...Vea Mas Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. Vea Menos | |
| Resiflow® L-64F MBE-1 | Estron Chemical, Inc. | Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat fo...Vea Mas Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat formulations. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the epoxy resin and thus is very easily incorporated into the final formulation. Vea Menos | |
| Resiflow® L-64F MBP-10 | Estron Chemical, Inc. | Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into t...Vea Mas Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the polyester resin and thus is very easily incorporated into the final formulation. This product has been designed for a balance of optimal flow and clarity in PE-TGIC, PE-PT910 and PE-Primid clearcoat formulations. Vea Menos | |
| Resiflow® L-65F MBH-2 | Estron Chemical, Inc. | Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in pol...Vea Mas Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in polyester-urethane clearcoat formulations. Vea Menos | |
| Resiflow® L-65F-50 | Estron Chemical, Inc. | Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. ...Vea Mas Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F-50 also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and good anti-pop/solvent-popping characteristics. Vea Menos | |
| Resiflow® L-65F-50 BA | Estron Chemical, Inc. | Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-me...Vea Mas Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing leveling, Resiflow® L-65F-50 BA also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. Vea Menos | |
| Resiflow® L-66F MBP-10 | Estron Chemical, Inc. | Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clari...Vea Mas Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clarity in PE-TGIC clearcoat formulations. Vea Menos | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based...Vea Mas Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. Vea Menos | |
| Resiflow® LV MBP-10 | Estron Chemical, Inc. | Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder ...Vea Mas Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder coating formulations. Vea Menos | |
| Resiflow® P-37 | Estron Chemical, Inc. | Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other c...Vea Mas Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other components during extrusion, and this results in a uniform system. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-37 into powder coating formulations. Vea Menos | |
| Resiflow® PF-67 | Estron Chemical, Inc. | Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P...Vea Mas Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder systems such polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PH-240 | Estron Chemical, Inc. | Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat a...Vea Mas Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat adhesion and wetting on hydrophilic substrates such as sandblasted or unpolished metal. Resiflow® PH-240 can also improve or eliminate surface defects including orange peel, pinholes and craters. Vea Menos | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...Vea Mas Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. Vea Menos | |
| Resiflow® PL-200 | Estron Chemical, Inc. | Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its s...Vea Mas Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its suitability and reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PL-200A | Estron Chemical, Inc. | Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and E...Vea Mas Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PL-200A into pigmented powder coating formulations. Vea Menos | |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...Vea Mas Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Vea Menos | |
| Resiflow® PL-210 | Estron Chemical, Inc. | Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance a...Vea Mas Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple ...Vea Mas Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® PV-60 | Estron Chemical, Inc. | Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such...Vea Mas Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 1-2% of Resiflow® PV-60 into powder coating formulations. Vea Menos | |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...Vea Mas Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Vea Menos | |
| Resiflow® S | Estron Chemical, Inc. | Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...Vea Mas Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. Vea Menos | |
| SBS-1200 Wax | Estron Chemical, Inc. | SBS-1200 Wax is a general purpose, synthetic wax used in powder coatings to impart slip, improve mar resistance and lower gloss. Dosages of 0.5-1% can provide improved slip and surface appearance, as well as increased degassing capability. SBS-1200 Wax ca...Vea Mas SBS-1200 Wax is a general purpose, synthetic wax used in powder coatings to impart slip, improve mar resistance and lower gloss. Dosages of 0.5-1% can provide improved slip and surface appearance, as well as increased degassing capability. SBS-1200 Wax can be used in a wide array of binders such as polyesters, hybrids, polyurethanes and epoxies. Vea Menos | |
| SBS-1215 Wax | Estron Chemical, Inc. | SBS-1215 Wax is a special polyolefin-PTFE composition used in powder coatings to provide exceptional scratch, abrasion, mar and water resistance. Dosages of 0.5-1% are used to achieve optimal slip properties and mar resistance. It has a melting point of 1...Vea Mas SBS-1215 Wax is a special polyolefin-PTFE composition used in powder coatings to provide exceptional scratch, abrasion, mar and water resistance. Dosages of 0.5-1% are used to achieve optimal slip properties and mar resistance. It has a melting point of 100 to 108 degrees Celsius. SBS-1215 Wax imparts slip, lowers gloss and can be used in a wide array of binders such as polyesters, hybrids, polyurethanes and epoxies. Vea Menos |
