| Deuterol 201 E | Deuteron | Deuterol 201 E is a defoaming dispersing agent for fillers and pigments in water soluble and water miscible primers and lacquers. The wetting effect of Deuterol 201 E in primers and one-coat lacquers, which are applied to badly degreased metal substrates,...Vea Mas Deuterol 201 E is a defoaming dispersing agent for fillers and pigments in water soluble and water miscible primers and lacquers. The wetting effect of Deuterol 201 E in primers and one-coat lacquers, which are applied to badly degreased metal substrates, considerably improves the adhesion of the coating film to the metal substrate. The product also shows a defoaming effect in the manufacture as well in the processing of water dilutable systems. Vea Menos | Request Sample |
| Deuterol Emulgator BI | Deuteron | Deuterol Emulgator BI has especially been developed as an additive for the production of watery bitumen emulsions respectively its further processing in road surfaces. When processing the product in acidified watery systems as a cationic emulsifier a good...Vea Mas Deuterol Emulgator BI has especially been developed as an additive for the production of watery bitumen emulsions respectively its further processing in road surfaces. When processing the product in acidified watery systems as a cationic emulsifier a good stability to the emulsion is imparted. On the other hand Deuterol Emulgator BI provides a favorable breaking behavior of the emulsion (in connection with suitable coarse aggregates). Vea Menos | Request Sample |
| Deuterol Paraffindispersion | Deuteron | Deuterol Paraffindispersion is used as a matting additive in water dilutable polyester systems. It produces a continuous uniform paraffin film in water dilutable systems. Deuterol Paraffindispersion has been designed to be used in water dilutable polye...Vea Mas Deuterol Paraffindispersion is used as a matting additive in water dilutable polyester systems. It produces a continuous uniform paraffin film in water dilutable systems. Deuterol Paraffindispersion has been designed to be used in water dilutable polyester systems for coating of wood surfaces. It can also be used in other water dilutable systems. Effectiveness and compatibility need to be checked for each application. Vea Menos | Request Sample |
| Deuteron AP 348 | Deuteron | Deuteron AP 348 is designed for the use in powder coatings. An important feature of Deuteron AP 348 is the low viscosity of the fusion. It is a non-polar polyethylene wax with good toughness in spite of the high hardness. Surfaces of powder coatings conta...Vea Mas Deuteron AP 348 is designed for the use in powder coatings. An important feature of Deuteron AP 348 is the low viscosity of the fusion. It is a non-polar polyethylene wax with good toughness in spite of the high hardness. Surfaces of powder coatings containing Deuteron AP 348 show a remarkable slip resistance. This effect is shown by only a few waxes. In some cases it has been noticed that the presence of Deuteron AP 348 in powder coatings improves their flow. This depends on the low softening respective melting point of this polyethylene wax and its limited compatibility with the used resins. Vea Menos | Request Sample |
| Deuteron ES 222 | Deuteron | "Deuteron ES 222 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in removing air-bubbles. This applies in particular after mixing resin and curing agent. Technologically useful is th...Vea Mas "Deuteron ES 222 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in removing air-bubbles. This applies in particular after mixing resin and curing agent. Technologically useful is the improved wetting of the substrate, thus making it easier to release air bubbles from the substrate’s surface. Because of the above mentioned properties Deuteron ES 222 is an effective wetting and air release agent in particular for laminating resins based on unsaturated polyester. The product is very suitable in laminating resins where excellent adhesion of polyester resins and glass fiber is required. Deuteron ES 222 is also very suitable as an air release agent in other systems based on unsaturated polyester resins. Vea Menos | Request Sample |
| Deuteron ES 224 | Deuteron | Deuteron ES 224 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in removing air-bubbles (for instance when mixing resin and curing agent). It improves wetting of the substrate in sys...Vea Mas Deuteron ES 224 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in removing air-bubbles (for instance when mixing resin and curing agent). It improves wetting of the substrate in systems containing extenders. Because of the above mentioned properties Deuteron ES 224 is an excellent wetting and air release agent in particular for laminating resins based on unsaturated polyester. The product is very suitable in laminating resins where excellent adhesion of polyester resin and glass fiber is required. The product is particularly suitable for thixotropic systems since it has no impact on the rheology (thixotropy). Vea Menos | Request Sample |
| Deuteron LE 100 LV | Deuteron | Deuteron LE 100 LV has a cationic character and an extremely high polarity. Because of this, the electrical resistance is reduced considerably - even when using small quantities. Deuteron LE 100 LV is delivered with an active content of 100 %. The prod...Vea Mas Deuteron LE 100 LV has a cationic character and an extremely high polarity. Because of this, the electrical resistance is reduced considerably - even when using small quantities. Deuteron LE 100 LV is delivered with an active content of 100 %. The product is free of solvent and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used (among others) in PUR-foams (production of shoe-soles), UV- or electron-beam curing screen inks to avoid electrostatic charge. Vea Menos | Request Sample |
| Deuteron LE 151 | Deuteron | Deuteron LE 151 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the shoe industry to produce soles with antistatic properties. Deuteron LE 151 is preferred in systems w...Vea Mas Deuteron LE 151 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the shoe industry to produce soles with antistatic properties. Deuteron LE 151 is preferred in systems which already contain MEG as a cross-linking component. Deuteron LE 151 is of high polarity and therefore reduces the electrical resistance of polyurethane-foams considerably - even when using small quantities. Vea Menos | Request Sample |
| Deuteron LE 50 | Deuteron | Deuteron LE 50 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 50 is soluble in all common lacquer so...Vea Mas Deuteron LE 50 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 50 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. Deuteron LE 50 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes. Vea Menos | Request Sample |
| Deuteron LE 50 UV | Deuteron | Deuteron LE 50 UV is a variant of Deuteron LE 100 LV, diluted in 50% DPGDA. Even in small amounts it considerably reduces the surface and volume resistances. Deuteron LE 50 UV is soluble in all conventional solvent mixtures used in the coating industry, p...Vea Mas Deuteron LE 50 UV is a variant of Deuteron LE 100 LV, diluted in 50% DPGDA. Even in small amounts it considerably reduces the surface and volume resistances. Deuteron LE 50 UV is soluble in all conventional solvent mixtures used in the coating industry, partially with some slight clouding. Vea Menos | Request Sample |
| Deuteron LE 512 | Deuteron | Deuteron LE 512 has a cationic character and an extremely high polarity. Because of this, the electrical resistance is reduced considerably - even when using small quantities. Deuteron LE 512 is a solid product with an active content of 100 %. Therefor...Vea Mas Deuteron LE 512 has a cationic character and an extremely high polarity. Because of this, the electrical resistance is reduced considerably - even when using small quantities. Deuteron LE 512 is a solid product with an active content of 100 %. Therefore the product is especially suitable in solvent free systems. Deuteron LE 512 is soluble in water and alcohol but insoluble in aliphatic hydrocarbons. The suitability of Deuteron LE 512 in different systems has to be determined by the user. The product is, for example, very effective in PU-systems. However, products of this chemical family are practically ineffective in epoxy systems. Vea Menos | Request Sample |
| Deuteron LE 80 | Deuteron | Deuteron LE 80 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 80 is soluble in all common lacquer...Vea Mas Deuteron LE 80 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 80 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. Deuteron LE 80 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes. Vea Menos | Request Sample |
| Deuteron LE 829 | Deuteron | Deuteron LE 829 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the production of soles with antistatic character as required by EN 344 or for special shoes for use in ...Vea Mas Deuteron LE 829 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the production of soles with antistatic character as required by EN 344 or for special shoes for use in computing and medical areas. Deuteron LE 829 is of high polarity and thus noticeably reduces the electrical resistance of polyurethane-foams, even when used in small quantities. Vea Menos | Request Sample |
| Deuteron LE 947 | Deuteron | Deuteron LE 947 is designed to be used in solvent-based finishing coatings and primers to decrease the electrical resistance in order to adjust the conductivity for electrostatic spraying. Because of its cationic character and its high polarity, Deuter...Vea Mas Deuteron LE 947 is designed to be used in solvent-based finishing coatings and primers to decrease the electrical resistance in order to adjust the conductivity for electrostatic spraying. Because of its cationic character and its high polarity, Deuteron LE 947 reduces the electrical resistance of solvents and their mixtures. The product is compatible with most of the binders common in the paint industry. It is highly effective, thus making it possible to obtain the required conductivity with a small addition of the product. Generally there is no impact on drying and adhesion of the coating system. Vea Menos | Request Sample |
| Deuteron MK | Deuteron | Deuteron MK is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueou...Vea Mas Deuteron MK is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. Vea Menos | Request Sample |
| Deuteron MK-F | Deuteron | Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aque...Vea Mas Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. Vea Menos | Request Sample |
| Deuteron MK-F6 | Deuteron | Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqu...Vea Mas Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. Vea Menos | Request Sample |
| Deuteron MM 659 | Deuteron | Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing la...Vea Mas Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing lacquers is not possible due to the favorable composition of Deuteron MM 659. The obtained coating surfaces show excellent resistance regarding burnishing and mar resistance. The use of Deuteron MM 659 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. A reaction between matting agent and lacquer system and therefore a spoiling of the storage stability has not been noticed. Vea Menos | Request Sample |
| Deuteron MM 669 | Deuteron | Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders ...Vea Mas Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders no cloudiness has been noticed. The surfaces of coatings show excellent resistance to burnishing and mar resistance. Deuteron MM 669 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. Vea Menos | Request Sample |
| Deuteron MM 677 | Deuteron | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and furniture lacquers, printing inks and industrial finishes (air-drying and stoving enamels). ...Vea Mas Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and furniture lacquers, printing inks and industrial finishes (air-drying and stoving enamels). In comparison with powdery matting agents Deuteron MM 677 particularly offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. Vea Menos | Request Sample |
| Deuteron MM 680 | Deuteron | Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems. Deuteron MM 680 is a mixture of finest-groun...Vea Mas Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems. Deuteron MM 680 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing. Deuteron MM 680 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. Vea Menos | Request Sample |
| Deuteron MM 682 | Deuteron | Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers. ...Vea Mas Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers. The matting effect induced with Deuteron MM 682 is highly resistant to mechanical influences ("polishing" or abrasion). Deuteron MM 682 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. Vea Menos | Request Sample |
| Deuteron MM 684 | Deuteron | Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers. ...Vea Mas Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers. Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing. Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. Vea Menos | Request Sample |
| Deuteron MM 823 | Deuteron | Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. Deuteron M...Vea Mas Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Vea Menos | Request Sample |
| Deuteron ND 210 | Deuteron | Deuteron ND 210 is a wetting agent with a cationic effect. It reduces the surface tension of organic solvents or binding agent solutions and thus supports the dispersion process, making it more cost-effective. Deuteron ND 210 also allows a more economi...Vea Mas Deuteron ND 210 is a wetting agent with a cationic effect. It reduces the surface tension of organic solvents or binding agent solutions and thus supports the dispersion process, making it more cost-effective. Deuteron ND 210 also allows a more economical use of pigments since both the hiding and the coloring powers largely depend on the dispersion conditions. The much-dreaded flooding and floating of pigments can be prevented with Deuteron ND 210. Deuteron ND 210 is suitable for the production of pigmented coating materials based on oxidative and on physically drying binding agents. The wetting-promoting properties of Deuteron ND 210 are particularly advantageous for the production of highly filled systems, such as pigment paste. Likewise, the agent is also suitable for coating systems for which both of the above aspects are desirable. Vea Menos | Request Sample |
| Deuteron ND 953 | Deuteron | Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained j...Vea Mas Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained just through the character of the used binder or by addition of a suitable thickener. The presence of Deuteron ND 953 improves the storage stability. Unwelcome thickening during storage will be avoided or limited. Deuteron ND 953 is used in aqueous paints and coating materials, e.g. masonry paints, fillers, aqueous primers, water-based bituminous emulsions. The product is also suitable for use in water-based pigment preparations. It is most effective in presence of inorganic pigments and fillers. Vea Menos | Request Sample |
| Deuteron ND 960 HF | Deuteron | Deuteron ND 960 HF is a wetting and viscosity reducing additive. Even small additions to unsaturated polyester resins allow for an increase of pigment/filler content respectively a better dispersability. According to the above meutioned properties Deut...Vea Mas Deuteron ND 960 HF is a wetting and viscosity reducing additive. Even small additions to unsaturated polyester resins allow for an increase of pigment/filler content respectively a better dispersability. According to the above meutioned properties Deuteron ND 960 HF is suitable when binder systems shall be highly filled and the wetting properties of the binders are insufficient. Therefore the most suggested use of Deuteron ND 960 HF is in manufacturing of fillers or mastics based on unsaturated polyester/reactive solvent (such as styrene) systems. Deuteron ND 960 HF has both a positive impact on the dispersing process and on the substrate wetting. Vea Menos | Request Sample |
| Deuteron OG 250 | Deuteron | Deuteron OG 250 affects the surface characteristics of aqueous coating systems. The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable ...Vea Mas Deuteron OG 250 affects the surface characteristics of aqueous coating systems. The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable as an additive to produce water-based „soft-feeling-lacquers“. On the other hand the use of Deuteron OG 250 can increase the slipperiness of coatings, when the properties imparted by the used binder are not satisfactory. Applications include aqueous finishing lacquers, packing lacquers, printing inks and aqueous wood stains. Also ideal for use in "soft-feeling-lacquers“ for industrial application (combined with matting plastic deuteron MK). Vea Menos | Request Sample |
| Deuteron OG 330 | Deuteron | Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effec...Vea Mas Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness. It is ideal for use in water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. Vea Menos | Request Sample |
| Deuteron OG 8820 | Deuteron | Deuteron OG 8820 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...Vea Mas Deuteron OG 8820 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability to over 200 °C. When used as an additive in radically curing coatings systems, Deuteron OG 882x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 882x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 882x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 882x is intended for application in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 882x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. Vea Menos | Request Sample |
| Deuteron OG 8822 | Deuteron | Deuteron OG 8822 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...Vea Mas Deuteron OG 8822 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability to over 200 °C. When used as an additive in radically curing coatings systems, Deuteron OG 882x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 882x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 882x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 882x is intended for application in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 882x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. Vea Menos | Request Sample |
| Deuteron OG 8824 | Deuteron | Deuteron OG 8824 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...Vea Mas Deuteron OG 8824 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability to over 200 °C. When used as an additive in radically curing coatings systems, Deuteron OG 882x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 882x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 882x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 882x is intended for application in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 882x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. Vea Menos | Request Sample |
| Deuteron PMH C | Deuteron | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings. Deuteron PMH C can be used as a matt...Vea Mas Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, radiation curing varnishes with the additional use of SiO2. With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. Vea Menos | Request Sample |
| Deuteron PMH F | Deuteron | Deuteron PMH F is a fine micronized, pure thermoset with a compact particle structure. Due to the fineness the products can be used as a matting additives in many applications in varnishes and coatings. | Request Sample |
| Deuteron PMH M | Deuteron | Deuteron PMH M is a fine micronized, pure thermoset with a compact particle structure. Due to the fineness the products can be used as a matting additives in many applications in varnishes and coatings. | Request Sample |
| Deuteron SF 505 | Deuteron | Deuteron SF 505 increases the smoothness and adds a pleasant grip to the surface. The addition of Deuteron SF 505 leads to a significant reduction of the coefficient of friction and highly increased scratch and abrasion resistance. It contains neither wax...Vea Mas Deuteron SF 505 increases the smoothness and adds a pleasant grip to the surface. The addition of Deuteron SF 505 leads to a significant reduction of the coefficient of friction and highly increased scratch and abrasion resistance. It contains neither waxes nor silicones. Vea Menos | Request Sample |
| Deuteron SF 707 | Deuteron | Deuteron SF 707 increases the smoothness and adds a pleasant grip to the surface. It includes neither waxes nor silicones. The matting effect is smooth, so that the haptic can be adjusted, without heavily influencing the gloss level. Deuteron SF 707 is...Vea Mas Deuteron SF 707 increases the smoothness and adds a pleasant grip to the surface. It includes neither waxes nor silicones. The matting effect is smooth, so that the haptic can be adjusted, without heavily influencing the gloss level. Deuteron SF 707 is suitable for systems where smoothness and pleasant haptic is desired in small dosages. Depending on the complete system Deuteron SF 707 can also be used to improve the mechanical resistance. Vea Menos | Request Sample |
| Deuteron SO 100 | Deuteron | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...Vea Mas Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the recoatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. Vea Menos | Request Sample |
| Deuteron SO 300 | Deuteron | Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and...Vea Mas Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is temperature resistant up to 160°C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the recoatability. In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is intended for all water-based lacquers, coatings and printing inks which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. Vea Menos | Request Sample |
| Deuteron SO 302 | Deuteron | Deuteron SO 302 is a dispersion of an elastomer in water corresponding to Deuteron SO 300, however with considerably larger particle size distribution. It lends the coating a rough, soft-touch-surface. It also acts as a matting agent. | Request Sample |
| Deuteron SO 500 | Deuteron | Deuteron SO 500 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the syst...Vea Mas Deuteron SO 500 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the recoatability. In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is intended for all solvent-based coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. Vea Menos | Request Sample |
| Deuteron SO 510 | Deuteron | Deuteron SO 510 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the syst...Vea Mas Deuteron SO 510 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Vea Menos | Request Sample |
| Deuteron SR 28 | Deuteron | Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities. Deuteron SR 28 requires no heat for mixing. It can be stirred into cold wat...Vea Mas Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities. Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy. It is ideal for all aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. Vea Menos | Request Sample |
| Deuteron ST | Deuteron | Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and op...Vea Mas Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. Vea Menos | Request Sample |
| Deuteron ST100 | Deuteron | Deuteron ST100 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional propert...Vea Mas Deuteron ST100 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST100 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. Vea Menos | Request Sample |
| Deuteron ST125 | Deuteron | Deuteron ST125 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional propert...Vea Mas Deuteron ST125 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST125 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. Vea Menos | Request Sample |
| Deuteron ST250 | Deuteron | Deuteron ST250 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional propert...Vea Mas Deuteron ST250 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST250 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. Vea Menos | Request Sample |
| Deuteron ST50 | Deuteron | Deuteron ST50 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properti...Vea Mas Deuteron ST50 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST50 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. Vea Menos | Request Sample |
| Deuteron ST500 | Deuteron | Deuteron ST500 is a coarse powder for producing extremely distinct surface textures. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. Deuteron ST500 can be used in both solventbased an...Vea Mas Deuteron ST500 is a coarse powder for producing extremely distinct surface textures. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. Deuteron ST500 can be used in both solventbased and solvent-free coatings, and also in waterbased coating systems. Areas of application are mainly functional coatings, e.g. anti-slip coatings. Decorative coatings are also possible. Vea Menos | Request Sample |
| Deuteron UV 1240 | Deuteron | Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240. The photoinitiator Deutero...Vea Mas Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240. The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. Vea Menos | Request Sample |
| Deuteron UV 1242 | Deuteron | The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1242 may be used as a UV hard...Vea Mas The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. Vea Menos | Request Sample |
| Deuteron UV 1250 | Deuteron | The photoinitiator Deuteron UV 1250 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1250 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1250 may be used as a UV hard...Vea Mas The photoinitiator Deuteron UV 1250 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1250 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 1250 may be used as a UV hardener for all binding agents that can be cationically polymerized and release coatings. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250. Vea Menos | Request Sample |
| Deuteron UV 2257 | Deuteron | Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257. ...Vea Mas Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257. Deuteron UV 2257 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 2257 is soluble in these binder systems including common solvents and reactive diluents. Vea Menos | Request Sample |
| Deuteron UV 3100 | Deuteron | The photoinitiator Deuteron UV 3100 hardens binder systems that polymerise cationically under UV exposure. Deuteron UV 3100 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 3100 may be used as a UV hard...Vea Mas The photoinitiator Deuteron UV 3100 hardens binder systems that polymerise cationically under UV exposure. Deuteron UV 3100 is soluble in these binder systems including the usual solvents and reactive diluents. Deuteron UV 3100 may be used as a UV hardener for all binding agents that can be cationically polymerised, in particular epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 3100. Vea Menos | Request Sample |
| Deuteron UV RM10 | Deuteron | Deuteron UV RM10 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. Delivery as a paste allows easy, powder-free handling. The matting efficiency of the additives is largely independent from the coating‘s film thickness...Vea Mas Deuteron UV RM10 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. Delivery as a paste allows easy, powder-free handling. The matting efficiency of the additives is largely independent from the coating‘s film thickness. Vea Menos | Request Sample |
| Deuteron UV RM15 | Deuteron | Deuteron UV RM15 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. | Request Sample |
| Deuteron UV RM17 | Deuteron | Deuteron UV RM17 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. | Request Sample |
| Deuteron UV RM19 | Deuteron | Deuteron UV RM19 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. Deuteron UV RM19 contains TMPEOTA, a more reactive base compared to our other UV RM-prod...Vea Mas Deuteron UV RM19 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. Deuteron UV RM19 contains TMPEOTA, a more reactive base compared to our other UV RM-products. Vea Menos | Request Sample |
| Deuteron UV RMP | Deuteron | Deuteron UV RMP is primarily suited for matting radical curing 100% UV systems. The effect is based on a partial incompatibility that disrupts the even formation of the surface during curing. This creates a rough surface that causes highly diffuse light d...Vea Mas Deuteron UV RMP is primarily suited for matting radical curing 100% UV systems. The effect is based on a partial incompatibility that disrupts the even formation of the surface during curing. This creates a rough surface that causes highly diffuse light diffraction. Vea Menos | Request Sample |
| Deuteron UV RS20 | Deuteron | Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties. It is ideal for use in radically curing UV coatings and prin...Vea Mas Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties. It is ideal for use in radically curing UV coatings and printing inks, in particular for solvent-free systems. Vea Menos | Request Sample |
| Deuteron VT 819 | Deuteron | The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 8...Vea Mas The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 819 is compatible with most binders and thickeners which are customary in the paint industry. Deuteron VT 819 is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. The product has no tendency to form lumps. Solutions can be produced with a simple stirrer. The use of a high shear rate is not necessary. The product‘s easy solubility is only given when it is incorporated into systems with a pH-value ranging between neutral and alkaline.When the solution is prepared, its pH-value can be adjusted towards an acidic pH-value. Deuteron VT 819 is ideal for use in aqueous primers, emulsions paints, adhesives, dispersion plasters, printing inks, silicate paints, aqueous preparations of pigments and fillers. Vea Menos | Request Sample |
| Deuteron VT 855 | Deuteron | Deuteron VT 855 is for aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations. It is especially well suited for the building and do-it-yourself se...Vea Mas Deuteron VT 855 is for aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations. It is especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior is required but high-performance stirring devices, such as dissolvers, are not available. In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 855 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most of binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 855 allows the preparation of highly viscous systems without technical help. Vea Menos | Request Sample |
| Deuteron VT 856 | Deuteron | Deuteron VT 856 is for aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations. It is especially well suited for the building and do-it-yourself se...Vea Mas Deuteron VT 856 is for aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations. It is especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior is required but high-performance stirring devices, such as dissolvers, are not available. In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 856 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most of binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 856 allows the preparation of highly viscous systems without technical help. Vea Menos | Request Sample |
| Deuteron VT 910 | Deuteron | Deuteron VT 910 is a natural biopolymer based on poly-saccharides. It is suitable for use as a thickener and stabilising additive for all aqueous coating systems and technical applications such as water-thinnable lacquers, dispersion paints and plas-ters...Vea Mas Deuteron VT 910 is a natural biopolymer based on poly-saccharides. It is suitable for use as a thickener and stabilising additive for all aqueous coating systems and technical applications such as water-thinnable lacquers, dispersion paints and plas-ters, glues, printing inks, silicon paints as well as pigments and filler preparations. Vea Menos | Request Sample |
| Deuteron VT 920 | Deuteron | Deuteron VT 920 is a natural biopolymer based on poly-saccharides. It is suitable for use as a thickening agent and stabilising additive for lacquers, foodstuffs, cosmetics and pharmaceuticals. It can be used for all aqueous coating systems and technical ...Vea Mas Deuteron VT 920 is a natural biopolymer based on poly-saccharides. It is suitable for use as a thickening agent and stabilising additive for lacquers, foodstuffs, cosmetics and pharmaceuticals. It can be used for all aqueous coating systems and technical applications such as dispersion paints and plasters, glues, water-miscible paints, printing inks, silicate paint, as well as pigment and filler preparations. Vea Menos | Request Sample |
| Deuteron VT 930 | Deuteron | Deuteron VT 930 is the transparent version of Deuteron VT 920. Compared to other Deuteron thickeners, solutions of Deuteron VT 930 are transparent. The high transparency allows for gels used in clear, water-based, high-quality applications. It is suitabl...Vea Mas Deuteron VT 930 is the transparent version of Deuteron VT 920. Compared to other Deuteron thickeners, solutions of Deuteron VT 930 are transparent. The high transparency allows for gels used in clear, water-based, high-quality applications. It is suitable for use as a thickening agent and stabilising additive for laquers, food-stuffs, cosmetics and pharmaceuticals. It can be used for all aqueous coating systems and technical applications. Vea Menos | Request Sample |
| Deuteron WAX A | Deuteron | Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion. Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal...Vea Mas Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion. Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent. Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Vea Menos | Request Sample |
| Deuteron WAX MPO | Deuteron | Deuteron-WAX MPO is a micronized polyolefin wax characterized by a fine particle size distribution and good ease of dispersion. The use of Deuteron-WAX MPO also leads to excellent results in powder coatings. The dispersed wax shows resistance to set...Vea Mas Deuteron-WAX MPO is a micronized polyolefin wax characterized by a fine particle size distribution and good ease of dispersion. The use of Deuteron-WAX MPO also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Vea Menos | Request Sample |
| Deuteron WAX PP | Deuteron | Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-W...Vea Mas Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Vea Menos | Request Sample |
| Deuteron WAX PP/2 | Deuteron | Deuteron-WAX PP/2 is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron...Vea Mas Deuteron-WAX PP/2 is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP/2 also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP/2 has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Vea Menos | Request Sample |
| Deuteron WAX TF | Deuteron | Deuteron-WAX TF has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Deuteron-WAX TF imparts excellent buff resistance and slip properties. It produces a...Vea Mas Deuteron-WAX TF has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Deuteron-WAX TF imparts excellent buff resistance and slip properties. It produces a durable, semi-gloss finish when used either alone or with silica. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX TF also leads to excellent results in powder coatings. Vea Menos | Request Sample |
| Deuteron WS | Deuteron | Deuteron WS imparts excellent mar resistance and improves anti-blocking of varnishes and coatings. The product is different to conventional products because it does not negatively influence the recoatability and has no tendency to "orange-peel". Deuter...Vea Mas Deuteron WS imparts excellent mar resistance and improves anti-blocking of varnishes and coatings. The product is different to conventional products because it does not negatively influence the recoatability and has no tendency to "orange-peel". Deuteron WS does not only improve the slip but also the levelling and gloss of the coating in several applications. Deuteron WS can be used in a wide range of solvent-based lacquers and coatings, particularly wood finishes, water dilutable systems, waterbased paper coatings, baking enamels. Vea Menos | Request Sample |
| Deuteron XG | Deuteron | The use of Deuteron XG in aqueous systems, such as emulsion paints and plasters, prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is co...Vea Mas The use of Deuteron XG in aqueous systems, such as emulsion paints and plasters, prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry. Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 - 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG. It is ideal for all aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. Vea Menos | Request Sample |
| Pergopak M3 | Deuteron | Pergopak M3 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers ...Vea Mas Pergopak M3 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. Vea Menos | Request Sample |
| Pergopak M4 | Deuteron | Pergopak M4 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers ...Vea Mas Pergopak M4 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. Vea Menos | Request Sample |
