| AddWorks® LXR™ 308 AP | Clariant Plastics & Coatings Ltd. | AddWorks® LXR 308 AP is an optimized mixture of an UV absorber with radical scavenger (HALS), mostly suitable for low color solventborne clearcoats and UV cured coatings applicatons. | |
| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® is a multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. This product is biodegradable and is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocell...Vea Mas ANTIGEL® is a multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. This product is biodegradable and is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. It is composed of modified phenol derivative and methyl ethyl ketoxime (Meko) in solvent mixture with a component promoting wetting. This product is a clear to slightly turbid, light brownish liquid. Vea Menos | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® HS is a viscosity stabiliser with good wetting and dispersing properties especially for high-solid coating systems. It is free of ketoxime and aromates and is also biodegradable. ANTIGEL ®HS can be used in almost all coating systems like industri...Vea Mas ANTIGEL® HS is a viscosity stabiliser with good wetting and dispersing properties especially for high-solid coating systems. It is free of ketoxime and aromates and is also biodegradable. ANTIGEL ®HS can be used in almost all coating systems like industrial coatings, wood and furniture coatings, automotive coatings and pigment concentrations. It was especially developed for high-solid systems. This product is a cloudy, light yellowish liquid. Vea Menos | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF is a multifunctional additive for solvent borne and water-based coating systems. It is free of ketoxime and aromates, and is also biodegradable. The multifunctionality of ANTIGEL® KF-D is based on the synergistic activity of the components. Th...Vea Mas ANTIGEL® KF is a multifunctional additive for solvent borne and water-based coating systems. It is free of ketoxime and aromates, and is also biodegradable. The multifunctionality of ANTIGEL® KF-D is based on the synergistic activity of the components. The stabilisation is based on the oxygen binding properties of the antioxidant. ANTIGEL® KF-D improves flow and through-drying. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. Vea Menos | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has...Vea Mas ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has the following properties: stabilisation of viscosity against air oxidation, prevention of skinning, improved wetting, prevention of settlement, reduction of dispersing time, reworking of thickened batches, removal of floatation phenomena, and promotion of flow and gloss. The stabilisation is based on the oxygen binding properties of the antioxidant. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. Vea Menos | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective a...Vea Mas BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective as de-aerating and partially also as a levelling agent. This applies to the following binders: alkyd, alkyd/polyester-, unsaturated polyester-, NC-, AC-, PU, and acrylic systems. BLISTER FREE 3 is also very effective in water dilutable coating systems particularly, if they are based on alkyd/acrylics, saturated polyesters and epoxyde systems. Vea Menos | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45...Vea Mas BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45 has a good de-aerating effect on water thinnable coatings if they are based on the following binders: polyester, acid resin, and acrylic. Vea Menos | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 54 is a defoamer for solvent borne coating systems. It reduces the surface tension in solvent borne and solvent free coating systems. This product also improves leveling and avoids cratering. This product is a clear yellow liquid. Special app...Vea Mas BLISTER FREE 54 is a defoamer for solvent borne coating systems. It reduces the surface tension in solvent borne and solvent free coating systems. This product also improves leveling and avoids cratering. This product is a clear yellow liquid. Special applications are printing inks and coil coating systems. Vea Menos | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd ...Vea Mas BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd emulsions, with or without co-solvents. There are also very good de-aerating effects in many modified alkyds and alkyd/acrylic hybrids. This product was developed to prevent foam and bubbles during manufacture and application of aqueous coatings. BLISTER FREE 55 destroys foam very quickly by the interfacially active components. In many applications levelling is improved. Vea Menos | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering ...Vea Mas BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented. The film elasticity is improved. BLISTER FREE 56 is suitable in most water-based systems and acts as defoamer, deaerator and to some extend as levelling additive. This product is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes, and UV coating systems. Vea Menos | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented ...Vea Mas BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented and entrapped air as well as bubbles are quickly destroyed. Defoaming is promoted and defects like pinholes and craters are avoided. This product is a colourless to light yellowish liquid. Vea Menos | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying ...Vea Mas BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. BLISTER FREE 75 is a product with interfacial activity, which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is improved. Vea Menos | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate sy...Vea Mas BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems. Complete de-aerating is a requirement for an excellent film formation. Trapped air, pinholes can cause dirt retention and difficulties, when topcoating and polishing. Apart from these surface defects, frequently reductions in gloss and deterioration of water resistance are observed. This product reduces considerably the formation of blisters and causes intensive de-aerating and the uniform formation of the waxlayer with unsaturated polyesters. Vea Menos | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 88 is a biodegradable defoamer for solvent borne coating systems. It is an interfacially active additive, which influences the surface tension. This property reduces the formation of bubbles to a minimum during the manufacture of paint or dur...Vea Mas BLISTER FREE 88 is a biodegradable defoamer for solvent borne coating systems. It is an interfacially active additive, which influences the surface tension. This property reduces the formation of bubbles to a minimum during the manufacture of paint or during application. Any bubbles formed are quickly destroyed. In general BLISTER FREE 88 has a beneficial effect on the flow of the paint film. It is especially suitable in polyester systems free from paraffins. BLISTER FREE 88 shows also good defoaming in epoxy, PUR and acrylate based systems. Vea Menos | |
| Ceridust® 1060 TP | Clariant Plastics & Coatings Ltd. | Ceridust® 1060 TP is a micronized polar modified wax based on renewable resource. | |
| Ceridust® 2051 | Clariant Plastics & Coatings Ltd. | Ceridust® 2051 is a micronized synthetic wax. | |
| Ceridust® 3251 | Clariant Plastics & Coatings Ltd. | Ceridust® 3251 is a micronized, modified polyethylene wax. | |
| Ceridust® 3610 | Clariant Plastics & Coatings Ltd. | Ceridust® 3610 is a micronized high density polyethylene wax. | |
| Ceridust® 3620 | Clariant Plastics & Coatings Ltd. | Ceridust® 3620 is a micronized polyethylene wax. | |
| Ceridust® 3715 | Clariant Plastics & Coatings Ltd. | Ceridust® 3715 is a micronized, polar modified polyethylene wax recommended for solvent and water based coatings and inks. | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 3920 F | Clariant Plastics & Coatings Ltd. | Ceridust® 3920 F is a micronized, polytetrafluoroethylene modified polyethylene wax. | |
| Ceridust® 5551 | Clariant Plastics & Coatings Ltd. | Ceridust® 5551 is a micronized, partly saponified ester of montanic acids. | |
| Ceridust® 6721 | Clariant Plastics & Coatings Ltd. | Ceridust® 6721 is a micronized, amide modified polypropylene wax. | |
| Ceridust® 8020 | Clariant Plastics & Coatings Ltd. | Ceridust® 8020 is a micronized, highly modified copolymer wax. | |
| Ceridust® 9202 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9202 F is a micronized polytetrafluoroethylene. | |
| Ceridust® 9205 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9205 F is a micronized polytetrafluorethylene. | |
| Ceridust® 9615 A | Clariant Plastics & Coatings Ltd. | Ceridust® 9615 A is a micronized blend of polyethylene and amide wax. | |
| Ceridust® 9630 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9630 F is a polytetrafluoroethylene modified polyethylene wax. | |
| Exolit® AP 420 | Clariant Plastics & Coatings Ltd. | Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate. | |
| Exolit® AP 422 | Clariant Plastics & Coatings Ltd. | Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. | |
| Exolit® AP 423 | Clariant Plastics & Coatings Ltd. | Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...Vea Mas Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. Vea Menos | |
| Exolit® AP 462 | Clariant Plastics & Coatings Ltd. | Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...Vea Mas Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. Vea Menos | |
| Exolit® AP 740 | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...Vea Mas Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Vea Menos | |
| Exolit® AP 740 F | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...Vea Mas Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Vea Menos | |
| Exolit® AP 750 | Clariant Plastics & Coatings Ltd. | Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....Vea Mas Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. Vea Menos | |
| Exolit® IFR 36 | Clariant Plastics & Coatings Ltd. | Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...Vea Mas Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. Vea Menos | |
| Hordaphos® 124 | Clariant Plastics & Coatings Ltd. | Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic ...Vea Mas Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters and ketones. It can be emulsified with water. Vea Menos | |
| Hordaphos® 222 | Clariant Plastics & Coatings Ltd. | Hordaphos® 222 is a clear, colourless to yellowish liquid with an ester-like odour. It has reacts acidic and can be neutralized with organic and inorganic bases. Hordaphos® 222 is emulsifiable in water and soluble in common organic solvents. | |
| Hordaphos® MDAH | Clariant Plastics & Coatings Ltd. | Hordaphos® MDAH is a clear, colourless to yellowish liquid with an ester-like odour that may darken during storage. The product is soluble in organic solvents. When the ester is neutralized, it is emulsifiable in water. | |
| Hordaphos® MDB | Clariant Plastics & Coatings Ltd. | Hordaphos® MDB is a multi-functional additive which can be used in various applications, especially in printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hordaphos® MOB | Clariant Plastics & Coatings Ltd. | Hordaphos® MOB is a multi-functional additive for various applications, especially for printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hostaphat® TBEP HQ | Clariant Plastics & Coatings Ltd. | Hostaphat® TBEP HQ is a phosphate ester used as plasticizer for polymer dispersions. | |
| Hostavin® 3051 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3051 is a low molecular weight hindered amine light stabilizer (HALS), characterized by its low volatility and good migration properties and enhanced Tribo effect for powder coating. | |
| Hostavin® 3051-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3051-2 disp. is a 52% aqueous dispersion of a low molecular radical scavenger (HALS). It is characterized by its easy incorporation, broad compatibility and low volatility. | |
| Hostavin® 3053 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3053 is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3055 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3055 is a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3058 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency...Vea Mas Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency. Vea Menos | |
| Hostavin® 3065 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3065 is a 100% liquid low molecular weight radical scavenger (HALS). It is characterized by its good solubility, broad compatibility and good stabilization efficiency in all kind of coatings. | |
| Hostavin® 3070 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration ...Vea Mas Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for plastic coatings and architectural façade coatings. Hostavin® 3070 DISP has been awarded with an EcoTain® label resulting from its excellent toxicological profile. Vea Menos | |
| Hostavin® 3070 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique...Vea Mas Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique solubility in solvent-borne coatings. Vea Menos | |
| Hostavin® 3225-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3225-2 disp. is a 52 % aqueous dispersion of a mixture of a halogenated benzotriazole UV-absorber with a radical scavenger (HALS). | |
| Hostavin® 3315 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extracti...Vea Mas Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for wood and plastics coatings. Hostavin 3315 DISP has been awarded with an EcoTain label resulting from its excellent toxicological profile. Vea Menos | |
| Hostavin® 3326 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatin...Vea Mas Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatings. Vea Menos | |
| Hostavin® 3326 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 is an UV absorber with broad absorption. Besides cooling application it is mainly used as an UV stabilizer for a wide range of plastics. | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | KORRODUR is a corrosion protection additive for solvent borne coating systems. It is primarily a rust converting additive for conventional alkyd resin paints. However, Korrodur also has a good effect in solvent containing paints based on epoxy, chlorinate...Vea Mas KORRODUR is a corrosion protection additive for solvent borne coating systems. It is primarily a rust converting additive for conventional alkyd resin paints. However, Korrodur also has a good effect in solvent containing paints based on epoxy, chlorinated rubber or acrylic binders. Typical applications are: Anticorrosive primers, one coat anticorrosive systems, and maintenance finishes. Vea Menos | |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | KORRODUR AL 2 is used e.g. in primers to compensate poor preparation of the substrate and unsatisfactory painting conditions. It converts residual rust into non corroding iron tannate and provides long term protection against corrosion. If moisture is pr...Vea Mas KORRODUR AL 2 is used e.g. in primers to compensate poor preparation of the substrate and unsatisfactory painting conditions. It converts residual rust into non corroding iron tannate and provides long term protection against corrosion. If moisture is present it will be emulsified into the film during painting and will evaporate during drying. The wetting agent ensures good penetration of the residual rust particles, dirt and wetting of badly degreased surfaces. Vea Menos | |
| LA THIX FB | Bernd Schwegmann GmbH & Co. KG | LA THIX FB is a rheological additive for solvent borne coating systems. It increases the viscosity of binders in solvent borne systems and causes pseudoplastic rheology. LA THIX FB acts only on binders containing ester-, hydroxyl- or other functional grou...Vea Mas LA THIX FB is a rheological additive for solvent borne coating systems. It increases the viscosity of binders in solvent borne systems and causes pseudoplastic rheology. LA THIX FB acts only on binders containing ester-, hydroxyl- or other functional groups, which are able to form hydrogen bonds. Polar solvents may have an influence on the effectiveness. This product is applied in thickening of all common solvent containing binder systems with polar groups. It is particularly suitable for high build systems, textured stoving paints, architectural- and DIY-paints. Vea Menos | |
| Licocene® PE 4201 powder | Clariant Plastics & Coatings Ltd. | Licocene® PE 4201 powder is a low viscous, non-polar polyethylene wax that is a highly efficient lubricant. | |
| Licocene® PE 5301 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE 5301 granules is a low viscosity, high melting point Metallocene catalyzed Polyethylene wax. | |
| Licocene® PE MS 431 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. | |
| Licowax® 371 FP | Clariant Plastics & Coatings Ltd. | Licowax® 371 FP is an oxidized ethylene vinyl acetate (EVA) wax. | |
| Licowax® E flakes | Clariant Plastics & Coatings Ltd. | Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain the...Vea Mas Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Vea Menos | |
| Licowax® KPS flakes | Clariant Plastics & Coatings Ltd. | Licowax® KPS flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® KSL flakes | Clariant Plastics & Coatings Ltd. | Licowax® KSL flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® OP flakes | Clariant Plastics & Coatings Ltd. | Licowax® OP flakes is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® OP powder | Clariant Plastics & Coatings Ltd. | Licowax® OP powder is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® PE 190 powder | Clariant Plastics & Coatings Ltd. | Licowax® PE 190 powder is a non-polar high density polyethylene with low molecular weight. | |
| Licowax® PED 153 | Clariant Plastics & Coatings Ltd. | Licowax® PED 153 is an oxidized, high density polyethylene wax. | |
| Licowax® PED 191 powder | Clariant Plastics & Coatings Ltd. | Licowax® PED 191 powder is an oxidized, high density polyethylene wax with high molecular weight. | |
| Licowax® PED 521 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 521 granules is an oxidized polyethylene wax. | |
| Licowax® PED 522 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 522 granules is an oxidized, high density polyethylene wax. | |
| Licowax® S flakes | Clariant Plastics & Coatings Ltd. | Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properti...Vea Mas Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properties). Vea Menos | |
| MITTEL S | Bernd Schwegmann GmbH & Co. KG | MITTEL S is a biodegradable defoamer for solvent borne coating systems. It is suitable for nearly all non-aqueous systems. MITTEL S is very efficient in alkyd (air drying), alkyd/polyester (heat stoving), chlorinated rubbers, epoxide, polyurethane, thermo...Vea Mas MITTEL S is a biodegradable defoamer for solvent borne coating systems. It is suitable for nearly all non-aqueous systems. MITTEL S is very efficient in alkyd (air drying), alkyd/polyester (heat stoving), chlorinated rubbers, epoxide, polyurethane, thermoplastic acrylic and reactive acrylics systems. This product decreases the surface tension and thus defoams most solvent based systems effectively. It eliminates air bubbles during manufacture and application. Already small quantities of MITTEL S prevent foaming and blistering during stoving enamels or varnishes. Vea Menos | |
| NO SED | Bernd Schwegmann GmbH & Co. KG | NO SED is a biodegradable antisettling agent for solvent based coatings. It is composed of organically modified bentonite with additives in solvent mixture. NO SED is very effective against settling and hard sediment in solvent borne coating systems with ...Vea Mas NO SED is a biodegradable antisettling agent for solvent based coatings. It is composed of organically modified bentonite with additives in solvent mixture. NO SED is very effective against settling and hard sediment in solvent borne coating systems with fillers such as barium sulphate or zinc dust. This product is easily distributed and compatible with most paint systems. It accelerates wetting of pigments and prevents flooding, even where pigments of different specific gravity are used. The dispersion time will be shortened. NO SED will create a thixotropic viscosity providing better processing and avoiding sagging when applied. NO SED prevents settling and hard sedimentation. It is easy to incorporate and suitable for most solvent based systems. Also in very difficult uses NO SED shows effective results. This product is suitable for solvent borne coatings based on alkyde (oven and air drying), acrylic, epoxy, polyester, chlorinated rubber, automotive and industrial coatings as well as road marking paints and zinc dust primers. Vea Menos | |
| OXFILM 351 | OXEA | OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required...Vea Mas OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required to obtain the desired final film hardness. OXFILM 351 is not designed to be a drop-in replacement for traditional ester alcohol or glycol ether coalescents. It is intended for next generation low odor, low VOC coatings. Use of a slightly harder polymer is recommended to compensate for its permanence and plasticizing effect in the dried film. Low odor, extremely low 28 day emission results are achievable with OXFILM 351 when properly formulated. Vea Menos | |
| OXSOFT 3G8 | OXEA | OXSOFT 3G8 is a phthalate-free, non-VOC plasticizer. It has excellent low temperature properties, highly resilient and a relative permanent plasticizer. | |
| OXSOFT DOA | OXEA | OXSOFT DOA is a phthalate-free, non-VOC plasticizer, and is especially suitable for low temperature applications. | |
| OXSOFT TOTM | OXEA | OXSOFT TOTM is a phthalate-free, non-VOC plasticizer. It is a very permanent plasticizer ideal for applications where migration is a concern. | |
| SCHWEGO ® Pur 8051 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO ® pur 8051 is a non-ionic thickening agent, which has a beneficial influence on the rheological properties of aqueous paint and varnish systems. It can be combined with other thickening agents in order to achieve special effects. The effect of th...Vea Mas SCHWEGO ® pur 8051 is a non-ionic thickening agent, which has a beneficial influence on the rheological properties of aqueous paint and varnish systems. It can be combined with other thickening agents in order to achieve special effects. The effect of this product is dependent on the binder system. It is a milky white liquid. Vea Menos | |
| SCHWEGO® Antimec | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® antimec is a multifunctional additive for water-based and solvent borne coating systems. It is free of ketoxime and aromates and is also biodegradable. This product can be used in almost all common paint systems water based and solvent based as w...Vea Mas SCHWEGO® antimec is a multifunctional additive for water-based and solvent borne coating systems. It is free of ketoxime and aromates and is also biodegradable. This product can be used in almost all common paint systems water based and solvent based as well. Effectiveness of antiskinning may be limited in long oil alkyd systems. It is a colourless, light yellowish clear liquid. Vea Menos | |
| SCHWEGO® corrit | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® corrit is a corrosion protection additive for water-based coating systems. It is primarily a rust converting additive for water based paints. It is used to compensate poor preparation of the substrate and unsatisfactory painting conditions. SCHWE...Vea Mas SCHWEGO® corrit is a corrosion protection additive for water-based coating systems. It is primarily a rust converting additive for water based paints. It is used to compensate poor preparation of the substrate and unsatisfactory painting conditions. SCHWEGO® corrit converts residual rust into a non-corroding iron organic compound and provides long term protection against corrosion. The wetting additive contained in SCHWEGO® corrit ensures good penetration of the residual rust particles, dirt and wetting of badly degreased surfaces, thus adhesion is promoted. Vea Menos | |
| SCHWEGO® Everlast | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Everlast is a rust decontamination system based on chelate. The slightly pasty liquid forms a metallic-organic iron complex with the neutralised rust layer. This developing black, very compact and protective layer provides a long term durability ...Vea Mas SCHWEGO® Everlast is a rust decontamination system based on chelate. The slightly pasty liquid forms a metallic-organic iron complex with the neutralised rust layer. This developing black, very compact and protective layer provides a long term durability against corrosion and is due to its containing film forming agents at the same time also a perfect primer. SCHWEGO® everlast is also well suitable for dipping and flow coating of closed containers. Hereafter a top coat should be applied. SCHWEGO® everlast may lead to discolorations of intact coatings and therefore should be removed immediately from them. Vea Menos | |
| SCHWEGO® Flow 8057 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently als...Vea Mas SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently also impair the gloss. SCHWEGO® flow 8057 eliminates such defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. Vea Menos | |
| SCHWEGO® Flow 8058 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suita...Vea Mas SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suitable for solvent free water thinnable systems. Flow disturbances, like orange peel or ropiness are undesirable film characteristics, which frequently also impair the gloss. SCHWEGO® flow 8058 eliminates these surface defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. Vea Menos | |
| SCHWEGO® Flow 8060 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8060 is a levelling additive for solvent borne coating systems. This colourless to light yellowish liquid is silicone free and s a surface active additive, which can eliminate levelling problems in solvent containing paint systems. In conseq...Vea Mas SCHWEGO® Flow 8060 is a levelling additive for solvent borne coating systems. This colourless to light yellowish liquid is silicone free and s a surface active additive, which can eliminate levelling problems in solvent containing paint systems. In consequence of the increased smoothness of the surface SCHWEGO® flow 8060 frequently also improves the gloss. In many cases the use of SCHWEGO® flow 8060 also eliminates floatation problems. SCHWEGO® flow 8060 is used in solvent borne or solvent free coating systems. It is effective in nearly all binder systems and it is not suitable for water-based coating materials. Vea Menos | |
| SCHWEGO® Fluor 6523 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Fluor 6523 is a highly effective wetting additive for solvent borne and water-based coating systems. It is biodegradable, free of PFOS, PFOA, and based on C4 technology. SCHWEGO® fluor 6523 possesses extremely high interfacial activity. In many s...Vea Mas SCHWEGO® Fluor 6523 is a highly effective wetting additive for solvent borne and water-based coating systems. It is biodegradable, free of PFOS, PFOA, and based on C4 technology. SCHWEGO® fluor 6523 possesses extremely high interfacial activity. In many solvents SCHWEGO® fluor 6523 reduces the surface tension to values of around 20 mN/m and is therefore used for wetting of non-polar substrates. Typical applications are: wetting additive for pigment pastes, prevention of floating and flooding effects, prevention of cratering, and coating of edges. Vea Menos | |
| SCHWEGO® Fluor 6536 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Fluor 6536 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. This product possesses extremely high interfacial activit...Vea Mas SCHWEGO® Fluor 6536 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. This product possesses extremely high interfacial activity. SCHWEGO® fluor 6536 reduces the surface tension to values of around 20 mN/m and is therefore used for wetting of non-polar substrates. Vea Menos | |
| SCHWEGO® Fluor 6543 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Fluor 6543 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. SCHWEGO® fluor 6543 possesses extremely high interfacial ...Vea Mas SCHWEGO® Fluor 6543 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. SCHWEGO® fluor 6543 possesses extremely high interfacial activity. This product reduces the surface tension to values of around 20 mN/m and is therefore used for wetting of non-polar substrates. Vea Menos | |
| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improve...Vea Mas SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improves levelling. Even at maximum level of addition SCHWEGO® foam 6303 is completely soluble in the coating systems. The elasticity of the film improves. This product can be used in solvent borne and water-based systems. In solvent borne systems SCHWEGO® foam 6303 is particularly effective as de-aerating and partially also as a levelling additive. Vea Menos | |
| SCHWEGO® Foam 6325 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6325 is a defoamer for water-based coating systems. It is VOC- and silicone-free. This product is a liquid, very effective defoaming additive for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic cop...Vea Mas SCHWEGO® Foam 6325 is a defoamer for water-based coating systems. It is VOC- and silicone-free. This product is a liquid, very effective defoaming additive for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. SCHWEGO® foam 6325 is readily emulsifiable in water. SCHWEGO® foam 6325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters. Vea Menos | |
| SCHWEGO® Foam 6343 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6343 is a defoamer for solvent based coating systems. decreases the surface tension and thus effects defoaming characteristics most solvent borne systems. It eliminates air bubbles during manufacture and application. Air bubbles burst quickl...Vea Mas SCHWEGO® Foam 6343 is a defoamer for solvent based coating systems. decreases the surface tension and thus effects defoaming characteristics most solvent borne systems. It eliminates air bubbles during manufacture and application. Air bubbles burst quickly before they can cause characteristic surface defects. Already small quantities of SCHWEGO® foam 6343 prevent foaming during stoving enamels or varnishes. This product is suitable for nearly all solvent borne coating systems. High efficiency is shown in alkyd (air drying), alkyd/polyester (heat-stoving), chlorinated rubber, epoxide, polyurethane, thermoplastic acrylics and reactive acrylic systems. Vea Menos | |
| SCHWEGO® Foam 6351 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly...Vea Mas Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly effective in hammer finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, which are suitable for airless spraying. This product is also effective in aqueous industrial finishes (alkyd/melamine systems). Vea Menos | |
| SCHWEGO® Foam 6354 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based ...Vea Mas SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based and solvent free paint systems. It improves levelling, prevents cratering and showing through the substrate. Vea Menos | |
| SCHWEGO® Foam 6356 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the f...Vea Mas SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented, and the film elasticity is improved. SCHWEGO® foam 6356 is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes and UV coating systems. Vea Menos | |
| SCHWEGO® Foam 6360 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings...Vea Mas SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. Vea Menos | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV c...Vea Mas SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6361 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. Vea Menos | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...Vea Mas SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. Vea Menos | |
| SCHWEGO® Foam 6377 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also su...Vea Mas SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also suitable in epoxy, PUR- and acrylate systems. Effective deaeration is required for smooth film formation. Trapped air, pinholes can cause dirt retention and difficulties when topcoating and polishing. Apart from these surface defects frequently a reduction in gloss and a deterioration in water resistance are observed. SCHWEGO® foam 6377 produces intensive defoaming and strongly reduces bubbles. Also, the even formation of the wax layer with unsaturated polyesters is promoted. SCHWEGO® foam 6377 is effective in wax containing as well as in wax free systems. Vea Menos | |
| SCHWEGO® Foam 6388 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during...Vea Mas SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during the manufacture of paint or during application is reduced to a minimum. Any bubbles formed are quickly destroyed. In general SCHWEGO® foam 6388 has beneficial effect on the flow of the paint film. Vea Menos |
