| Tyzor® TEP | LEHVOSS Group | Tyzor® TEP, a 60% active ethanolamine titanium complex, is a yellow to brownish slightly hazy organic liquid which is miscible with water and organic solvents. It is a low VOC product and therefore an excellent choice when avoiding volatile organics is im...Vea Mas Tyzor® TEP, a 60% active ethanolamine titanium complex, is a yellow to brownish slightly hazy organic liquid which is miscible with water and organic solvents. It is a low VOC product and therefore an excellent choice when avoiding volatile organics is important. Tyzor® TEP reacts with water by hydrolysis to form a reactive hydroxyl titanium chelate. The chelate is stable in water for extended periods. This chelate can form hydrogen bonds with functional organic groups such as -OH or –COOH. When reacted in this way with multifunctional polymers such as carbohydrates, strong gels may be formed by crosslinking. This product can act as an adhesion promoter to oxidized surfaces by a similar mechanism. Vea Menos | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It impr...Vea Mas Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450G extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. Vea Menos | |
| Ecodis™ NP | Arkema Rheology & Specialty Additives | Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders and inorganic pigments. It enables to achieve mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating too...Vea Mas Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders and inorganic pigments. It enables to achieve mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating tools. Ecodis™ NP is particularly adapted for the dispersion of fine calcium carbonates, clays and high value pigments such at titanium dioxide across a wide range of water based formulations. It ensures a very good storage stability even to formulations stored a long time at higher temperature, which is not the case of inorganic additives such as phosphate based dispersants. Ecodis™ NP contributes to reduce formulation costs thanks to its Vea Menos | Request Sample |
| DETERSOL EN 45 | Chemipol | DETERSOL EN 45 is a wetting agent of anionic surfactants, specifically developed for easing the moistening of aqueous paints on difficult surfaces, either it is due to its low porosity or its low surface tension. Suitable for the most habitual aqueous pai...Vea Mas DETERSOL EN 45 is a wetting agent of anionic surfactants, specifically developed for easing the moistening of aqueous paints on difficult surfaces, either it is due to its low porosity or its low surface tension. Suitable for the most habitual aqueous paints raw material. It does not modify the scrub resistance, since it generates insoluble calcium salts during the drying process. It has been proven to be highly effective when used in paints that will be applied on difficult wetting surfaces (plasters, pearlite). It extends the open time of the product, neutralizing the repellent effect of some plaster additives. It does not affect the float resistance. The effectiveness within a broad range of pH. Vea Menos | Request Sample |
| WorléeCryl® A 2210 60% In Aromatic HC 155-180 | Worlée-Chemie G.m.b.H. | Una resina acrílica de estireno para la producción de pinturas bases de secado físico. | |
| Polydo DP-2000 | Kukdo Chemical Co., Ltd. | Polydo DP-2000 polyether polyol is 2000 molecular weight polyether diol. It is generally used for soft flexible foam which is suitable to garment materials. It is blended with another polyols such as Polydo GY-3000 or GY-3000E to improve the property. | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments...Vea Mas SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. Vea Menos | |
| EPS® 572 | EPS Materials | EPS® 572 is a self-crosslinking acrylic copolymer recommended for the formulation of mosaic plasters, enamels for wood, metal and mineral substrates, varnishes and stains. | |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| P-Phenylenediamine (PPD) | Hainan Zhongxin Chemical Co., Ltd. | P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be u...Vea Mas P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be used in the production of hair dyes, rubber chemicals, textile dyes, pigments, and photographic developing chemicals. Vea Menos | |
| Emery | Boud Minerals & Polymers | Emery is a hard, natural mineral processed for non-slip and anti-skid systems where high-friction is required including bridge decks, roads, rail platforms, footbridges, industrial flooring, car park ramps, ferry port linkspans, ship ramps, helipads and o...Vea Mas Emery is a hard, natural mineral processed for non-slip and anti-skid systems where high-friction is required including bridge decks, roads, rail platforms, footbridges, industrial flooring, car park ramps, ferry port linkspans, ship ramps, helipads and offshore walkways. This product is available in several sizes. Vea Menos | |
| Vinyltrimethoxysilane FR171 | Ningxia Futael Silicon Industry Co.,LTD | Vinyltrimethoxysilane FR171 is a colorless transparent liquid. It is used for polyethylene cross-linking to produce wire cable insulation and sheath materials. Because Silane cross-linked polyethylene has excellent electrical performance, good heat resist...Vea Mas Vinyltrimethoxysilane FR171 is a colorless transparent liquid. It is used for polyethylene cross-linking to produce wire cable insulation and sheath materials. Because Silane cross-linked polyethylene has excellent electrical performance, good heat resistance and stress crack resistance, it is widely used in the manufacture of wires, insulation and sheath materials. Vea Menos | |
| VESTANAT® EP*-E 95 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP*-E 95 is a solvent free, polyfunctional ethoxy silane. It is used as a rigid crosslinker to formulate highly scratch resistant coatings. | Request Sample |
| Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- co...Vea Mas Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. Vea Menos | Request Sample |
| BYK®-CATALYST 450 | BYK | Catalizador acido para sistemas transmitidos por solvente y de pintura acuosa. Solución de una sal de la amina de ácido sulfónico de para-tolueno. | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substr...Vea Mas BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. Vea Menos | |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substra...Vea Mas BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. Vea Menos | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substr...Vea Mas BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. Vea Menos | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...Vea Mas D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. Vea Menos | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...Vea Mas D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. Vea Menos | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...Vea Mas D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. Vea Menos | |
| R-8601 Alkyl Modified Polysiloxane | Zhejiang Feidian Chemical Co., Ltd. | R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorg...Vea Mas R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorganic fillers and polymers. Vea Menos | |
| Carbowet® GA-100 Surfactant | Evonik Operations GmbH, BL Coating Additives | Este surfactante, una mezcla de surfactantes no iónicos, puede ser caracterizado como un aditivo libre multifuncional, de baja espuma, libre de solventes y de alquil fenol libre de extoliato, usado para la humectación de pigmento y de substrato. Esta mezc...Vea Mas Este surfactante, una mezcla de surfactantes no iónicos, puede ser caracterizado como un aditivo libre multifuncional, de baja espuma, libre de solventes y de alquil fenol libre de extoliato, usado para la humectación de pigmento y de substrato. Esta mezcla patentada única fue diseñada para proveer humectación rápida de substrato y de pigmento, así como una mejor compatibilidad con espesantes asociativos en formulaciones arquitectónicas de pintura, y en dispersiones acuosas de pigmento. Vea Menos | Request Sample |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influen...Vea Mas Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF60W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 60um. Vea Menos | |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influ...Vea Mas Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF200W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 200um. Vea Menos | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influ...Vea Mas Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF300W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 300um. Vea Menos | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influ...Vea Mas Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. Vea Menos | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influ...Vea Mas Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF500W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 500um. Vea Menos | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influ...Vea Mas Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF800W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 800um. Vea Menos | |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...Vea Mas ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. Vea Menos | Request Sample |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO es un organosilano bifuncional que posee un grupo vinilo reactivo y un grupo trietoxisililo inorgánico hidrolizables. La naturaleza dual de la reactividad permite que Dynasylan® VTEO se una químicamente tanto con materiales inorgánicos (po...Vea Mas Dynasylan® VTEO es un organosilano bifuncional que posee un grupo vinilo reactivo y un grupo trietoxisililo inorgánico hidrolizables. La naturaleza dual de la reactividad permite que Dynasylan® VTEO se una químicamente tanto con materiales inorgánicos (por ejemplo vidrio, metales y masillas) como con polímeros orgánicos (materiales termoestables, termoplásticos y elastómeros), funcionando así como agente reticulante, estimulante de la adherencia y/o modificador de la superficie. Dynasylan® VTEO es un líquido incoloro de baja viscosidad con el típico olor de los aromáticos. Vea Menos | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO es un organosilano bifuncional que posee un grupo vinilo reactivo y un grupo trietoxisililo inorgánico hidrolizables. La naturaleza dual de la reactividad permite que Dynasylan® VTMO se una químicamente tanto con materiales inorgánicos (po...Vea Mas Dynasylan® VTMO es un organosilano bifuncional que posee un grupo vinilo reactivo y un grupo trietoxisililo inorgánico hidrolizables. La naturaleza dual de la reactividad permite que Dynasylan® VTMO se una químicamente tanto con materiales inorgánicos (por ejemplo vidrio, metales y masillas) como con polímeros orgánicos (materiales termoestables, termoplásticos y elastómeros), funcionando así como agente reticulante, estimulante de la adherencia y/o modificador de la superficie. Dynasylan® VTMO es un líquido incoloro de baja viscosidad con el típico olor de los aromáticos. Vea Menos | |
| COATOSIL* 2287 SILANE | Momentive | El silano 1706 CoatOsil es un monómero del silano que Poliuretano ede ser utilizado como reticulador el látex de vinilo y látex de acrílico. Poliuretano ede ser adecuado para aplicaciones de revestimientos OEM ( Fabricante de Equipos Originales) y arquite...Vea Mas El silano 1706 CoatOsil es un monómero del silano que Poliuretano ede ser utilizado como reticulador el látex de vinilo y látex de acrílico. Poliuretano ede ser adecuado para aplicaciones de revestimientos OEM ( Fabricante de Equipos Originales) y arquitectónicas. Este silano escopolymerized fácilmente en polímeros de látex de vinilo y acrílico. Incorporación y formulación apropiadas Poliuretano eden resultar en un revestimiento resistente altamente reticulado, una vez curado. La estructura única de este silano hace que sea inusualmente estable en revestimientos transmitidos por agua; Preservan los sitios reactivos hasta la coalescencia del revestimiento. Vea Menos | |
| COATOSIL* 1770 SILANE | Momentive | El Aditivo de revestimientos CoatOSil* 1300 es un silicón hidrofóbicamente modificado con un equilibrio sobresaliente de propiedades que permita que ayude a des- airear sistemas transmitidos por agua sin causar efectos, separación u otros problemas. | |
| VESTANAT® B 1370 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1370 es un poliisocianato cicloalifático bloqueado. Se presenta como una solución al 60% en acetato de n-butilo/xileno. Este producto se caracteriza por tener un excelente equilibrio de reactividad y estabilidad de almacenaje en la pintura ya ...Vea Mas VESTANAT® B 1370 es un poliisocianato cicloalifático bloqueado. Se presenta como una solución al 60% en acetato de n-butilo/xileno. Este producto se caracteriza por tener un excelente equilibrio de reactividad y estabilidad de almacenaje en la pintura ya formulada. Es indicada para acabados automotores OEM con resistencia mejorada al grabado con ácido. Los grados de VESTANAT® son monómeros de diisocianato alifático para sistemas poliuretanos estables a la luz y reticulantes poliisocianatos para revestimientos poliuretanos de alto rendimiento. Vea Menos | Request Sample |
| Bis-[3-(Trimethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(trimetoxisilil)propil]amina es un agente de reticulación eficiente que se utiliza para la terminación y protección de prepolímero de poliuretano con buena adherencia a sustratos difíciles. | Request Sample |
| Bis-[3-(Triethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(trietoxisilil)propil]amina es un agente de reticulación eficiente que se utiliza para la terminación y protección de prepolímero de poliuretano con buena adherencia a sustratos difíciles. | Request Sample |
| Polydo GY-3000 | Kukdo Chemical Co., Ltd. | Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...Vea Mas Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. Vea Menos | |
| Andisil 174 Silane | AB Specialty Silicones | Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinkin...Vea Mas Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinking agent, and blend additive. Vea Menos | |
| Andisil 171 Silane | AB Specialty Silicones | Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhe...Vea Mas Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhesion between glass, mineral, and metal surfaces and provides elongation, flexibility, and spreading. Vea Menos | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...Vea Mas Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. Vea Menos | |
| Pigmented Quartz | Boud Minerals & Polymers | Pigmented Quartz are quartz sands and gravels that are colour-coated with a polyurethane resin. This product is commonly used with a colour background binder and gives many colour variation options in a resin coating system. | |
| Pigmented Quartz Blends | Boud Minerals & Polymers | Pigmented Quartz Blends are quartz sands and gravels that are colour-coated with polyurethane resin. This product comes in a variety of colour mixes for use in resin coating systems. | |
| VESTANAT® B 1186 A | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1186 A is a caprolactam-blocked polyisocyanate. It offers low yellowing even at high curing temperatures, and is approved for direct food contact in interior can applications. This product is also recommended for heat-curing 1K PUR coatings. | Request Sample |
| VESTANAT® B 1358 DINP | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1358 DINP is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. | Request Sample |
| VESTANAT® EP-B 1042 E | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-B 1042 E is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. | Request Sample |
| VESTANAT® EP-B 1581 E | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-B 1581 E is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. | Request Sample |
| VESTANAT® EP-B 1481 ND | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-B 1481 ND is a caprolactam-blocked polyisocyanate for liquid applications. It is flexible, and can be used for coil coatings. | Request Sample |
| AM-1345XL | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-1345XL, in the form of a clear liquid, is a high solids aliphatic isocyanate crosslinker that is dispersible in water. It is used in leather base coat or topcoat application to improve physical properties and long term durability of the coating. | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...Vea Mas EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. Vea Menos | |
| FINNTALC M03C | Elementis | FINNTALC M03C is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural produc...Vea Mas FINNTALC M03C is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M04SLC | Elementis | FINNTALC M04SLC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades have been purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natur...Vea Mas FINNTALC M04SLC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades have been purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M05NC | Elementis | FINNTALC M05NC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural prod...Vea Mas FINNTALC M05NC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M05SLC | Elementis | FINNTALC M05SLC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural prod...Vea Mas FINNTALC M05SLC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M10E | Elementis | FINNTALC M10E is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural produ...Vea Mas FINNTALC M10E is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M12 | Elementis | FINNTALC M12 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural produc...Vea Mas FINNTALC M12 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M15 ULM | Elementis | FINNTALC M15 ULM is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural pro...Vea Mas FINNTALC M15 ULM is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Finntalc M15 ULM is heat-treated to ensure ultra-low microbiological contamination. Vea Menos | Request Sample |
| FINNTALC M15C | Elementis | FINNTALC M15C is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural produc...Vea Mas FINNTALC M15C is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M15SLC | Elementis | FINNTALC M15SLC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural prod...Vea Mas FINNTALC M15SLC is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M20SL | Elementis | FINNTALC M20SL is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural produ...Vea Mas FINNTALC M20SL is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M30E | Elementis | FINNTALC M30E is a hydrated magnesium silicate with a chemical formula of Mg 3Si4O 10(OH) 2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural pro...Vea Mas FINNTALC M30E is a hydrated magnesium silicate with a chemical formula of Mg 3Si4O 10(OH) 2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M65 | Elementis | FINNTALC M65 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...Vea Mas FINNTALC M65 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| MICROTALC IT EXTRA | Elementis | MICROTALC IT EXTRA is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. FINNTALC grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural p...Vea Mas MICROTALC IT EXTRA is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. FINNTALC grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC P05 | Elementis | FINNTALC P05 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition. In combination with a preci...Vea Mas FINNTALC P05 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC P10 | Elementis | FINNTALC P10 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition. In combination with a preci...Vea Mas FINNTALC P10 is a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| Picassian® XL-701 | Stahl Polymers | Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. Th...Vea Mas Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. This product is a yellow, slightly hazy liquid with a solid content of 50 percent. Vea Menos | |
| Picassian® XL-702 | Stahl Polymers | Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formula...Vea Mas Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH greater than 8 to achieve a long pot life. Vea Menos | |
| Picassian® XL-725 | Stahl Polymers | Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and ma...Vea Mas Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. Vea Menos | |
| Picassian® XL-732 | Stahl Polymers | Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good ad...Vea Mas Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. Vea Menos | |
| PT 350 | BIP (Oldbury) Ltd | PT 350 is a modified reactant resin. Primarily used as a cross Linking Resins for Acrylic Pastes and coatings and use as fabric stiffeners or binders. It combines easy care with additive fixation. | |
| Silcron® G-860 | PQ Corporation | Silcron® G-860 is a synthetic amorphous silica. It is a general purpose matting agent especially suitable for coil and general industrial coatings. It is also an ink adsorbing pigment for inkjet coatings. | |
| Gasil® 35M W | PQ Corporation | Gasil® 35M W is a synthetic amorphous silica. It is used as a general purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers, and drafting film. It is also used as ...Vea Mas Gasil® 35M W is a synthetic amorphous silica. It is used as a general purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers, and drafting film. It is also used as an anti-plate-out additive for calendered PVC and as an ink adsorbing pigment for inkjet. Gasil® 35M W is a fine, light powder and care should be taken to avoid inhaling it. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. Vea Menos | |
| Gasil® HP220 | PQ Corporation | Gasil® HP220 is a synthetic amorphous silica. It is a high efficiency, easy dispersible matting agent with controlled particle size. It is suitable for matting of both clear and pigmented coatings including wood finishes, alkyd paints and varnishes, and c...Vea Mas Gasil® HP220 is a synthetic amorphous silica. It is a high efficiency, easy dispersible matting agent with controlled particle size. It is suitable for matting of both clear and pigmented coatings including wood finishes, alkyd paints and varnishes, and coil and can coatings. Gasil® HP220 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. Vea Menos | |
| Gasil® P-28 | PQ Corporation | Gasil® P-28 is a synthetic amorphous silica. It is used as a synthetic silica for use in coatings for thermal paper. Gasil® P-28 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust v...Vea Mas Gasil® P-28 is a synthetic amorphous silica. It is used as a synthetic silica for use in coatings for thermal paper. Gasil® P-28 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. Vea Menos | |
| Silcron® G-800 | PQ Corporation | Silcron® G-800 is a synthetic amorphous silica. This product is an organic treated silica matting agent for use in UV coatings. It displays high matting efficiency, transparency and abrasion resistance. Silcron® G-800 is a fine, light powder and care shou...Vea Mas Silcron® G-800 is a synthetic amorphous silica. This product is an organic treated silica matting agent for use in UV coatings. It displays high matting efficiency, transparency and abrasion resistance. Silcron® G-800 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. Vea Menos | |
| Silcron® G-830 | PQ Corporation | Silcron® G-830 is a synthetic amorphous silica. This product is used as a matting agent for thin film industrial coatings, inks, and high transparency waterbased coatings. Silcron® G-830 is a fine, light powder and care should be taken to avoid inhaling i...Vea Mas Silcron® G-830 is a synthetic amorphous silica. This product is used as a matting agent for thin film industrial coatings, inks, and high transparency waterbased coatings. Silcron® G-830 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. Vea Menos | |
| Gasil® 23F | PQ Corporation | Gasil® 23F is a high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented, water based coatings and printing inks. Gasil® 23F provides excellent matting efficiency combined with minimal effect on c...Vea Mas Gasil® 23F is a high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented, water based coatings and printing inks. Gasil® 23F provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. Vea Menos | |
| Gasil® 35M | PQ Corporation | Gasil® 35M Synthetic amorphous silica. General purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers and drafting film; anti-plate-out additive for calendered PVC....Vea Mas Gasil® 35M Synthetic amorphous silica. General purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers and drafting film; anti-plate-out additive for calendered PVC. Ink adsorbing pigment for inkjet coatings. Vea Menos | |
| Gasil® 200DF | PQ Corporation | Gasil® 200DF synthetic amorphous silica. Particle sized controlled product for smooth, drafting film coatings. Provides excellent 'tooth' for pencil receptivity. High resistance to polishing and ghosting on erasion. Resistant to metal marking. Back coatin...Vea Mas Gasil® 200DF synthetic amorphous silica. Particle sized controlled product for smooth, drafting film coatings. Provides excellent 'tooth' for pencil receptivity. High resistance to polishing and ghosting on erasion. Resistant to metal marking. Back coatings of photographic papers for pencil and ink receptivity. Water scavenging in aluminium paints. Vea Menos | |
| Gasil® EBN | PQ Corporation | Gasil® EBN is synthetic amorphous silica. Designed for matting of radiation cured coatings. Matting of high build coatings. Matting of plastisols. | |
| Gasil® HP230 | PQ Corporation | Gasil® HP230 is a synthetic amorphous silica. Matting agent for thin film industrial coatings, inks and high transparency waterbased coatings. | |
| Gasil® HP255 | PQ Corporation | Gasil® HP255 is a synthetic amorphous silica. Small particle size high matting efficiency silica for thin film coil coatings and inks formulations. | |
| Gasil® HP260 | PQ Corporation | Gasil® HP260 is synthetic amorphous silica. High efficiency, general purpose, easy dispersible matting agent . Suitable for a wide range of solvent based systems including metal coatings, wood finishes and fabric coatings. | |
| Gasil® HP270 | PQ Corporation | Gasil® HP270 is a synthetic amorphous silica. High efficiency, easy dispersible matting agent with controlled particle size. Suitable for matting of high solids systems, coil and can coatings. Ink adsorbing pigment for inkjet coatings. | |
| Gasil® HP280 | PQ Corporation | Gasil® HP280 is a synthetic amorphous silica. High efficiency, easy dispersible matting agent which provides a low sheen to gloss ratio. Suitable for matting of high solids and acid catalysed coil systems. Ink adsorbing pigment for inkjet coatings. | |
| Silcron® G-100 | PQ Corporation | Silcron® G-100 is a synthetic amorphous silica. General purpose matting agent especially suitable for water based systems including leather finishes. Ink absorbing pigment for ink-jet coatings. Tableting and free-flow agent in pharmaceutical and food. Ca...Vea Mas Silcron® G-100 is a synthetic amorphous silica. General purpose matting agent especially suitable for water based systems including leather finishes. Ink absorbing pigment for ink-jet coatings. Tableting and free-flow agent in pharmaceutical and food. Carrier/conversion of liquids to flowable powders. Vea Menos | |
| Silcron® G-601 | PQ Corporation | Silcron® G-601 is a synthetic amorphous silica. Silica matting agent used in coil and can coatings, radiation cured coatings, and high solids systems. It is specialty adsorbent in ink jet media. | |
| Silcron® G-602 | PQ Corporation | Silcron® G-602 is a synthetic amorphous silica. Matting agent for general industrial paints. Ink adsorber for ink-jet paper coatings. Free-flow agent in food. Carrier/conversion of liquids to flowable powders. | |
| Silcron® G-810 | PQ Corporation | Silcron® G-810 is a synthetic amorphous silica. It is a matting agent with excellent performances in 100% UV curable formulations. This product is also suitable for waterborne and high solids formulations. | |
| Gasil® CF44 | PQ Corporation | Gasil® CF44 is a special matting agent for cobalt - free alkyd formulations. It is compatible with the new co - free driers, allowing the formulation of fast drying, storage stable paints. | |
| Gasil® XE3100 | PQ Corporation | Gasil® XE3100 is a synthetic amorphous silica. It is used as an ultra high efficient silica matting agent. This product is suitable for wood, coil, and general industrial coatings. It performs well in waterbased formulations. | |
| Silcron® G-576 | PQ Corporation | Silcron® G-576 is a very high efficiency wax treated silica matting agent for UV curable coatings. | |
| Silcron® G-760 | PQ Corporation | Silcron® G-760 is a micronised matting silica for solvent-based and water-based wood finishes. The product is also suitable for Coil Coatings and Radiation Curable Coatings and Inks. | |
| Silcron® G-835 | PQ Corporation | Silcron® G-835 is a high efficiency matting agent for wood coatings and inks. Excellent performances in UV curable coatings. Also suitable to matt waterbased formulations. | |
| Silcron® XP140 | PQ Corporation | Silcron® XP140 is a matting agent suitable for Industrial Coatings especially Leather Topcoats, Plastic Coatings and Wood finishes. | |
| Silcron® XP160 | PQ Corporation | Silcron® XP160 is a matting agent suitable for Industrial Coatings especially Coil Coatings and Wood finishes. | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | Una resina acrílica de estireno que pueden ser reticulados con poliisocianatos. Se prefiere para la formulación de pinturas base de secado rápido , rellenos, y capas superiores de acero y plásticos. | |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. |
