| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...Vea Mas 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. Vea Menos | Request Sample |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...Vea Mas Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. Vea Menos | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDITOL® VXW 4934 | Allnex | Aditivo para la regulación de propiedades reológicas de pinturas diluibles en agua. | Request Sample |
| ADDITOL® VXW 6360 | Allnex | Espesante de poliuretano para sistemas de capa acuosos de secado al aire. Tiene propiedades reológicas excelentes, resultando en flujo y nivelación mejorados, espesor de película y fregado. | Request Sample |
| ADDITOL® VXW 6388 | Allnex | Espesante de poliuretano para sistemas de revestimiento acuosos de secado al aire. | Request Sample |
| ADDITOL® XL 280 | Allnex | Pasta fluida de anti-asentamiento con propiedades humectantes para pigmentos, a base de una arcilla especialmente modificada de montmorrilonite. | Request Sample |
| ADDITOL® XL 6557 | Allnex | Additol® XL 6557 es un medio de pulido polimérico reticulable. Proporciona humectación del pigmento, baja viscosidad de la pasta y buena estabilización de pigmentos en las pastas de pigmentos. Los revestimientos de acabado con tinta con este producto tien...Vea Mas Additol® XL 6557 es un medio de pulido polimérico reticulable. Proporciona humectación del pigmento, baja viscosidad de la pasta y buena estabilización de pigmentos en las pastas de pigmentos. Los revestimientos de acabado con tinta con este producto tienen una gran dureza, resistencia al amarilleo, alto brillo, buenas propiedades de secado y buena resistencia al agua y al clima. Se recomienda para aplicaciones industriales a base de solventes, como revestimientos de bobinas, pinturas anticorrosivas en aplicaciones navales y de trabajo pesado, agricultura, madera industrial y otros revestimientos metálicos. Vea Menos | Request Sample |
| AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 es una dispersión especial, estructurada, altamente cargada de AEROSIL®. hidrofóbico. Se puede utilizar para estabilizar pigmentos, como agente antisedimentación, para controlar la reología y para mejorar las propiedades mecánicas de rev...Vea Mas AERODISP® WR 8520 es una dispersión especial, estructurada, altamente cargada de AEROSIL®. hidrofóbico. Se puede utilizar para estabilizar pigmentos, como agente antisedimentación, para controlar la reología y para mejorar las propiedades mecánicas de revestimientos pigmentados a base de agua. Se recomienda para revestimientos acuosos en los que la dispersión debe agregarse al revestimiento en el momento de la mezcla mediante fuerzas de corte bajas o medias como por ejemplo, un disolvente. Vea Menos | Request Sample |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protecció...Vea Mas AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protección de las plantas. AEROSIL® 200 tiene control de la reología y tixotropía de los sistemas líquidos, aglutinantes y polímeros. También se utiliza para mejorar el flujo libre y anti-aglutinante característico de polvos, así como un anti-sedimentación, espesamiento, y agente anti-flacidez. Vea Menos | Request Sample |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 es una sílice pirogénica hidrofílica con una superficie específica de 300 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, resinas de poliéster insaturado, y caucho de silicona l...Vea Mas AEROSIL® 300 es una sílice pirogénica hidrofílica con una superficie específica de 300 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, resinas de poliéster insaturado, y caucho de silicona líquido. AEROSIL® 300 ha demostrado una excelente transparencia en resinas de poliéster insaturado y control de la reología y tixotropía de líquidos, aglutinantes y polímeros. Vea Menos | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 es una sílice pirogénica hidrofílica con una superficie específica de 380 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, y resinas de poliéster insaturado. AEROSIL® 380 tiene u...Vea Mas AEROSIL® 380 es una sílice pirogénica hidrofílica con una superficie específica de 380 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, y resinas de poliéster insaturado. AEROSIL® 380 tiene una excelente transparencia en resinas de poliéster insaturado y tiene control de la reología y tixotropía de líquidos, aglutinantes y polímeros. También se puede utilizar para el refuerzo de caucho de silicona y auxiliar de flujo. Vea Menos | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...Vea Mas AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. Vea Menos | Request Sample |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
| AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y t...Vea Mas AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y tixotropía de líquidos polares complejos basados en epoxi, poliuretano, o resinas de viniléster. También ayuda a que el engrosamiento y tixotropía de geles de cable para cables de fibra óptica. Vea Menos | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...Vea Mas AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. Vea Menos | Request Sample |
| AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reol...Vea Mas AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reología en sistemas líquidos complejos tales como 2 recubrimientos pack- epoxi. También se puede aplicar en sistemas de recubrimiento como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos c...Vea Mas AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. También se puede incorporar fácilmente en formulaciones de caucho de silicona y mejora sus propiedades mecánicas y ópticas. Vea Menos | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, ...Vea Mas AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar el efecto de protección contra la corrosión. Además, ofrece un eficaz control reológico en sistemas líquidos complejos. Vea Menos | Request Sample |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agente...Vea Mas AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agentes fitosanitarios. AEROSIL® R 972 tiene control reológico de sistemas líquidos complejos y es resistente al agua e hidrofobizante de sistemas líquidos. Se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y sel...Vea Mas AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y selladores de silicona, toner negativo, adhesivos y revestimientos poliméricos. AEROSIL® R 974 se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Además, mejora la hidrofobicidad y la reología de las tintas de impresión offset. Vea Menos | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...Vea Mas AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. Vea Menos | Request Sample |
| AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...Vea Mas AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. Vea Menos | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...Vea Mas AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. Vea Menos | |
| AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...Vea Mas AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. Vea Menos | |
| BENTONE® 34 | Elementis | BENTONE® 34 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 38 | Elementis | BENTONE® 38 rheological additive is a modified hectorite organoclay. This rheology modifier is advised for medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...Vea Mas BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. Vea Menos | |
| BENTONE® EW | Elementis | BENTONE® EW rheological additive is a refined and benificiated hectorite clay based thickener for waterborne paint and aqueous coating systems. This rheology modifier has outstanding sag and suspension control and can be incorporated in the pre-gel. | |
| BENTONE SD®-1 | Elementis | BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the pai...Vea Mas BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the paint manufacturing process and can be used for post-correction. Vea Menos | |
| BENTONE SD®-2 | Elementis | BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents...Vea Mas BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. Vea Menos | |
| BK-127 | LUKEM D.O.O. | BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...Vea Mas BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. Vea Menos | |
| BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...Vea Mas BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. Vea Menos | |
| BK–884A | LUKEM D.O.O. | BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...Vea Mas BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. Vea Menos | |
| BK-923 | LUKEM D.O.O. | BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...Vea Mas BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. Vea Menos | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...Vea Mas CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. Vea Menos | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...Vea Mas CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. Vea Menos | |
| CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...Vea Mas CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. Vea Menos | |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...Vea Mas CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. Vea Menos | |
| CLAYTONE® 40 | BYK | Claytone® 40 es un derivativo de bentonita organofílica que se utiliza como espesante tixotrópico y agente anti-sedimentación en sistemas de revestimientos basados en solventes de baja a media polaridad. Es una arcilla orgánica tradicional que requiere el...Vea Mas Claytone® 40 es un derivativo de bentonita organofílica que se utiliza como espesante tixotrópico y agente anti-sedimentación en sistemas de revestimientos basados en solventes de baja a media polaridad. Es una arcilla orgánica tradicional que requiere el agregado de un activador para lograr una eficiencia completa. Como producto de esmectita organofílica, puede aumentar en medios orgánicos y construir una estructura de gel (estructura de casa de naipes). Los enlaces débiles de hidrógeno entre las plaquetas simples de esmectita es la razón de esta estructura tixotrópica de gel. Para una eficiencia óptima, se necesita una completa separación de las plaquetas (completa dispersión de aglomerados en partículas primarias). Vea Menos | |
| CLAYTONE® AF | BYK | Claytone® AF es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes alifáticos y mezclas de solventes alifático-aromáticos que muestran una polaridad de media a baja. Claytone® AF produce viscosidad reproducible y desar...Vea Mas Claytone® AF es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes alifáticos y mezclas de solventes alifático-aromáticos que muestran una polaridad de media a baja. Claytone® AF produce viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la sedimentación de pigmentos. Claytone® AF es auto-dispersante y no requiere una activador polar. Claytone® AF elimina la necesidad de alto corte o pregeles. Vea Menos | |
| CLAYTONE® APA | BYK | Claytone® APA es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y mezclas de solventes aromático-oxigenados que muestran una polaridad de media a alta. Claytone® APA demuestra alta eficiencia gelificante...Vea Mas Claytone® APA es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y mezclas de solventes aromático-oxigenados que muestran una polaridad de media a alta. Claytone® APA demuestra alta eficiencia gelificante, viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la sedimentación de pigmentos y rellenos. Vea Menos | |
| CLAYTONE® HY | BYK | Claytone® HY es una montmorillonita modificada diseñada para su uso en tintas de impresión con una polaridad de baja a media. Claytone® HY demuestra alta eficiencia gelificante, aumenta la viscosidad y el valor de rendimiento, previene la aglomeración y s...Vea Mas Claytone® HY es una montmorillonita modificada diseñada para su uso en tintas de impresión con una polaridad de baja a media. Claytone® HY demuestra alta eficiencia gelificante, aumenta la viscosidad y el valor de rendimiento, previene la aglomeración y sedimentación de pigmentos, reduce el vapor y le permite al fabricante de tintas controlar la viscosidad pegajosa. Vea Menos | |
| CLAYTONE-40 | BYK | TIXOGEL® VP es un agente tixotrópico y anti-sedimentación para sistemas de baja a media polaridad. Para lograr una eficiencia óptima, TIXOGEL® VP deberia dispersarse utilizando altas fuerzas de corte. | |
| CLAYTONE-EM | BYK | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK | TIXOGEL® MPZ es un producto de la serie de arcillas orgánicas de Máximo Rendimiento. Es un espesante tixotrópico y agente anti-sedimentación sumamente eficiente utilizado en sistemas de media a alta polaridad. No es necesario el agregado de un activador e...Vea Mas TIXOGEL® MPZ es un producto de la serie de arcillas orgánicas de Máximo Rendimiento. Es un espesante tixotrópico y agente anti-sedimentación sumamente eficiente utilizado en sistemas de media a alta polaridad. No es necesario el agregado de un activador en sistemas de alta polaridad como regla, pero es beneficioso en sistemas con media polaridad. Vea Menos | |
| CLAYTONE-SF | BYK | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE®-VZ | BYK | TIXOGEL® VZ es un agente tixotrópico y anti-sedimentación para sistemas polares. Para una óptima eficiencia, TIXOGEL® VZ debería incorporarse bajo corte alto. Preferentemente, TIXOGEL® VZ es agregado a la base de fábrica. Este no es un grado preactivado y...Vea Mas TIXOGEL® VZ es un agente tixotrópico y anti-sedimentación para sistemas polares. Para una óptima eficiencia, TIXOGEL® VZ debería incorporarse bajo corte alto. Preferentemente, TIXOGEL® VZ es agregado a la base de fábrica. Este no es un grado preactivado y los activadores tienen que ser utilizados para brindar un rendimiento óptimo. Vea Menos | |
| DA-40A | Antex Chemicals (Zhongshan) Limited | DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| DA-40N | Antex Chemicals (Zhongshan) Limited | DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...Vea Mas Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. Vea Menos | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...Vea Mas Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. Vea Menos | |
| DISPERBYK®-2013 | BYK | DISPERBYK®-2013 es un aditivo dispersante y humectante libre de solventes para sistemas 100% UV y sistemas UV a base de agua y de solventes para tintas de impresión y revestimientos. Basado en su polaridad de producto balanceado y su modo de entrega al 10...Vea Mas DISPERBYK®-2013 es un aditivo dispersante y humectante libre de solventes para sistemas 100% UV y sistemas UV a base de agua y de solventes para tintas de impresión y revestimientos. Basado en su polaridad de producto balanceado y su modo de entrega al 100%, DISPERBYK®-2013 logra una excelente estabilización, en particular en sistemas 100% UV y especialmente de pigmentos orgánicos y pigmentos negros de carbón. Al hacerlo, este producto tiene un efecto impresionante y efectivo en reducción de viscosidad, al tiempo que reduce el comportamiento de flujo tixotrópico. Vea Menos | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) | Eastman Chemical B.V. | A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will...Vea Mas A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder. Vea Menos | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-553-0.4) | Eastman Chemical B.V. | Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is rea...Vea Mas Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is reactive and may be crosslinked with ureaformaldehydes, melamines, and polyisocyantes. Films of CAB-553-0.4 are colorless and have good ultraviolet stability, maintaining their low color over long periods of time. Vea Menos | |
| EASTMAN CELLULOSE ACETATE (CA-398-3) | Eastman Chemical B.V. | One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solv...Vea Mas One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solvents, plasticizers, and other modifying resins to formulate coatings for paper, glass, plastic, wire screen, and electrical wiring. Vea Menos | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-482-0.5) | Eastman Chemical B.V. | A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed ...Vea Mas A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed from Eastman CAP-482-0.5 have fast solvent release, excellent antiblocking properties, and grease resistance superior to that of other film-formers. Vea Menos | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | Eastman Chemical B.V. | A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV li...Vea Mas A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. Vea Menos | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...Vea Mas Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. Vea Menos | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...Vea Mas Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. Vea Menos | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...Vea Mas Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. Vea Menos | |
| Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...Vea Mas Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. Vea Menos | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...Vea Mas HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. Vea Menos | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. Vea Menos | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. Vea Menos | |
| HDK® H20 | Wacker Chemie AG | Una silicona amorfa sintética, hidrofóbica,, producida vía la hidrólisis por fuego. | |
| HDK® T30 | Wacker Chemie AG | Una silicona amorfa sintética, hidrofílica, producida vía la hidrólisis por fuego. | |
| HDK® T40 | Wacker Chemie AG | Una silicona amorfa sintética, hidrofílica, producida vía la hidrólisis por fuego. | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...Vea Mas HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...Vea Mas HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...Vea Mas HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...Vea Mas HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. Vea Menos | |
| HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...Vea Mas HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. Vea Menos | |
| HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...Vea Mas HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. Vea Menos | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Indunal S 2230 HPL | Indulor Chemie GmbH | Indunal S 2230 HPL is a water based resin technology for high performance pigment dispersions, solubilised with ammonia. It has excellent transfer and gloss, high color strength at lower pigment dosage, and high pigment to binder ratio with low viscosity....Vea Mas Indunal S 2230 HPL is a water based resin technology for high performance pigment dispersions, solubilised with ammonia. It has excellent transfer and gloss, high color strength at lower pigment dosage, and high pigment to binder ratio with low viscosity. Indunal S 2230 HPL is used in printing inks and overprint varnishes. Vea Menos | |
| Indunal T 122 | Indulor Chemie GmbH | Indunal T 122 is an emulsion polymer based on acrylates that is carboxylated and APEO-free. It is a thickener and can be combined with Induprint PAC 504 for the production of low-cost printing inks. Indunal T 122 is used in paints, plasters, water-based p...Vea Mas Indunal T 122 is an emulsion polymer based on acrylates that is carboxylated and APEO-free. It is a thickener and can be combined with Induprint PAC 504 for the production of low-cost printing inks. Indunal T 122 is used in paints, plasters, water-based printing inks, overprint varnishes, wood lacquers, base coatings on fiberboard, adhesives, paper coatings, and other water-based systems. Vea Menos | |
| Indunal T 1420 | Indulor Chemie GmbH | Indunal T 1420 is a terpolymeric carboxylated acrylic emulsion. It is a thickener and has excellent resolubility, very good transfer, and very high hydrosol viscosity. Indunal T 1420 is used in emulsion paints, water-based printing inks, plasters, and ove...Vea Mas Indunal T 1420 is a terpolymeric carboxylated acrylic emulsion. It is a thickener and has excellent resolubility, very good transfer, and very high hydrosol viscosity. Indunal T 1420 is used in emulsion paints, water-based printing inks, plasters, and overprint varnishes. Vea Menos | |
| Indunal T 147 | Indulor Chemie GmbH | Indunal T 147 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener and has excellent thixotropic thickening effect, excellent water retention value, and stabilizes pigments and fillers. Indunal T 147 is used in emulsion paints...Vea Mas Indunal T 147 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener and has excellent thixotropic thickening effect, excellent water retention value, and stabilizes pigments and fillers. Indunal T 147 is used in emulsion paints, plasters, wood lacquers and stains, adhesives, paper coatings, and textile coatings. Vea Menos | |
| Indunal T 256 | Indulor Chemie GmbH | Indunal T 256 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener, rheology additive, and stabilizes pigments and fillers. Indunal T 256 is used in printing inks, emulsion paints and plasters, wood lacquers and stains, adhesi...Vea Mas Indunal T 256 is an emulsion polymer based on acrylates that is carboxylated. It is a thickener, rheology additive, and stabilizes pigments and fillers. Indunal T 256 is used in printing inks, emulsion paints and plasters, wood lacquers and stains, adhesives, paper coatings, and textile coatings. Vea Menos | |
| LAPONITE® RD | BYK | Laponite® RD es un silicato sintético en capas. No es soluble en agua, pero se hidrata y aumenta para generar dispersiones coloidales incoloras y transparentes. Con concentraciones en agua del 2% o más, se pueden producir geles sumamente tixotrópicos. Est...Vea Mas Laponite® RD es un silicato sintético en capas. No es soluble en agua, pero se hidrata y aumenta para generar dispersiones coloidales incoloras y transparentes. Con concentraciones en agua del 2% o más, se pueden producir geles sumamente tixotrópicos. Este producto se utiliza para impartir una estructura sensible al corte en una amplia gama de formulaciones a base de agua. Estas incluyen revestimientos de superficies industriales y domésticas, limpiadores, esmaltes cerámicos, productos agroquímicos, de yacimientos petrolíferos y horticulturales. Vea Menos | |
| LAPONITE® RDS | BYK | Laponite® RDS es un silicato sintético en capas que incorpora peptizador de polifosfato inorgánico. Se hidrata y aumenta en agua para generar dispersiones coloidales incoloras y transparentes de baja viscosidad conocidas como soles. Con concentraciones en...Vea Mas Laponite® RDS es un silicato sintético en capas que incorpora peptizador de polifosfato inorgánico. Se hidrata y aumenta en agua para generar dispersiones coloidales incoloras y transparentes de baja viscosidad conocidas como soles. Con concentraciones en agua del 10%, permanecen libres flotando durante 24 horas. Al agregar pequeñas cantidades de electrolito, rápidamente se forman geles sumamente tixotrópicos. Este producto se utiliza para impartir una estructura sensible al corte en una amplia gama de formulaciones a base de agua incluyendo revestimientos de superficies industriales y domésticas, limpiadores, productos agroquímicos y horticulturales. Vea Menos | |
| LAPONITE® S482 | BYK | Laponite® S482 es un silicato sintético en capas modificado con un agente dispersante patentado. Se hidrata y aumenta en agua para generar dispersiones líquidas coloidales incoloras y translúcidas conocidas como soles. Con concentraciones en agua del 25% ...Vea Mas Laponite® S482 es un silicato sintético en capas modificado con un agente dispersante patentado. Se hidrata y aumenta en agua para generar dispersiones líquidas coloidales incoloras y translúcidas conocidas como soles. Con concentraciones en agua del 25% de sólidos, permanecen libres flotando hasta por 1 año. Al agregar pequeñas cantidades de electrolito, o formulaciones que contengan, por ejemplo, resinas, surfactantes o pigmentos, rápidamente se forman geles sumamente tixotrópicos. Se utiliza para impartir una estructura sensible al corte en una amplia gama de formulaciones a base de agua incluyendo revestimientos de superficies industriales y DIY, limpiadores domésticos, productos cerámicos y agroquímicos. Vea Menos | |
| LAPONITE® SL25 | BYK | Laponite® SL25 es una dispersión líquida lista para usar de silicato sintético en capas modificado con un agente dispersante patentado. Con un 25% de contenidos sólidos en agua, Laponite® SL25 es una dispersión líquida de baja viscosidad incolora y transl...Vea Mas Laponite® SL25 es una dispersión líquida lista para usar de silicato sintético en capas modificado con un agente dispersante patentado. Con un 25% de contenidos sólidos en agua, Laponite® SL25 es una dispersión líquida de baja viscosidad incolora y translúcida. Al agregar formulaciones que contengan, por ejemplo, resinas, surfactantes o pigmentos, rápidamente se forman geles sumamente tixotrópicos. Se utiliza para impartir una estructura sensible al corte en una amplia gama de formulaciones a base de agua incluyendo revestimientos de superficies industriales y DIY, limpiadores domésticos, productos cerámicos y agroquímicos. Vea Menos | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...Vea Mas Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. Vea Menos | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...Vea Mas Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. Vea Menos | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...Vea Mas Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. Vea Menos | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...Vea Mas Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. Vea Menos | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...Vea Mas Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. Vea Menos | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...Vea Mas Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. Vea Menos | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...Vea Mas Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. Vea Menos |
