SILCOLEASE UV CATA 243 | Elkem Silicones | SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mec...Vea Mas SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. Vea Menos | |
GENOMER* 6043/M22 | Rahn AG | GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesives. It shows excellent adhesive properties. This product t is used in association with urethane acrylates, polyester or epoxy...Vea Mas GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesives. It shows excellent adhesive properties. This product t is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. Vea Menos | Request Sample |
DUROXYN® VEF 4380w/35WA | Allnex | Ester de resina epoxi de secado oxidativo en forma de emulsión acuosa. | Request Sample |
RESYDROL® AX 250w/75EP | Allnex | Resydrol® AX 250W/75EP es un éster de resina epoxi modificada de ácidos grasos, diluible en agua. Proporciona excelente humectación de pigmentos, alta protección contra la corrosión y muy buena reactividad con resinas de melamina. | Request Sample |
BECKOCURE™ EH 2261w/41WA | Allnex | BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corros...Vea Mas BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corrosion protection and very good non-sagging properties can be formulated, which show good adhesion on untreated, smooth or galvanized steel substrates. Vea Menos | Request Sample |
Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy...Vea Mas Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. Vea Menos | |
EBECRYL® 3701 | Allnex | EBECRYL® 3701 es un diacrilato epoxi modificado con bisfenol A. Imparte flexibilidad y resistencia a revestimientos y tintas curadas mediante luz ultravioleta (UV) o haz de electrones (EB) mientras mantiene al mismo tiempo las propiedades ideales tales c...Vea Mas EBECRYL® 3701 es un diacrilato epoxi modificado con bisfenol A. Imparte flexibilidad y resistencia a revestimientos y tintas curadas mediante luz ultravioleta (UV) o haz de electrones (EB) mientras mantiene al mismo tiempo las propiedades ideales tales como respuesta de curado rápido y una resistencia superior a los productos químicos, que son típicas de los acrilatos epoxi estándar. Se recomienda su uso en: revestimientos transparentes para papel, madera y plástico rígido, adhesivos para laminación de papel y película, y vehículos para tintas litográficas, serigráficas y flexográficas. Vea Menos | Request Sample |
ADDITOL® VXW 6208 | Allnex | Aditivo de dispersión no iónico de polímero para el molido de pigmentos inorgánicos y orgánicos, en agua o en resina de alquido transmitida por agua, acrílico, epóxido, y emulsiones de uretano. | Request Sample |
BECKOPOX™ EH 637 | Allnex | Una aducto cicloalifático de poliamina con viscosidad muy baja, utilizado juntamente con resinas de epoxi líquidas, para compuestos para pisos con buena resistencia química y poca tendencia a hacerse amarillos. | Request Sample |
EBECRYL® 3416 | Allnex | EBECRYL® 3416 is an UV curable highly reactive epoxy acrylate, which may be cross-linked with suitable reactive diluters to especially durable, hard elastic and chemically resistant paint films of high quality. In conjunction with EBECRYL® 8306 and EBECRY...Vea Mas EBECRYL® 3416 is an UV curable highly reactive epoxy acrylate, which may be cross-linked with suitable reactive diluters to especially durable, hard elastic and chemically resistant paint films of high quality. In conjunction with EBECRYL® 8306 and EBECRYL® 171 it is used for metal coatings with excellent adhesion and corrosion resistance. It is used for metal coatings with excellent adhesion and corrosion resistance. Vea Menos | Request Sample |
EBECRYL® 6040 | Allnex | EBECRYL® 6040 is a modified diacrylate ester of bisphenol A epoxy resin. It is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 6040 cured by ultraviolet light (UV) or electron beam (EB) exhibit high su...Vea Mas EBECRYL® 6040 is a modified diacrylate ester of bisphenol A epoxy resin. It is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 6040 cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness, high gloss, low residual odour and the excellent solvent resistance typical of epoxyresins. It is particularly useful in overprint varnishes. Vea Menos | Request Sample |
EBECRYL® 600/50 TM | Allnex | EBECRYL® 600-50 TM is a bisphenol A epoxy diacrylate diluted with 50% of trimethylolpropane triacrylate (TMPTA) monomer. EBECRYL® 600/50 TM is characterized by its light colour, low odour and fast cure response. Films of EBECRYL® 600/50 TM cured by ultrav...Vea Mas EBECRYL® 600-50 TM is a bisphenol A epoxy diacrylate diluted with 50% of trimethylolpropane triacrylate (TMPTA) monomer. EBECRYL® 600/50 TM is characterized by its light colour, low odour and fast cure response. Films of EBECRYL® 600/50 TM cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxyresin. Vea Menos | Request Sample |
EBECRYL® 605/40 | Allnex | EBECRYL® 605/40 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fa...Vea Mas EBECRYL® 605/40 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL® 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance. Vea Menos | Request Sample |
UWS 1000 | AB Chimica srl | UWS 1000, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 68% of pigment type titanium dioxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1000, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 68% of pigment type titanium dioxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1020 | AB Chimica srl | UWS 1020, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type arylamide yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1020, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type arylamide yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1039 | AB Chimica srl | UWS 1039, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type disazo yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1039, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type disazo yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1051 | AB Chimica srl | UWS 1051, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type benzimidazolone yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1051, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type benzimidazolone yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1021 | AB Chimica srl | UWS 1021, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 50% of pigment type dinitroaniline orange. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1021, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 50% of pigment type dinitroaniline orange. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1058 | AB Chimica srl | UWS 1058, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type DPP red. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1058, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type DPP red. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1090 | AB Chimica srl | UWS 1090, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 30% of pigment type quinacridone magenta. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1090, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 30% of pigment type quinacridone magenta. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1091 | AB Chimica srl | UWS 1091, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type quinacridone magenta. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1091, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type quinacridone magenta. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1041 | AB Chimica srl | UWS 1041, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1041, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1042 | AB Chimica srl | UWS 1042, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1042, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type dioxazine violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1045 | AB Chimica srl | UWS 1045, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type quinacridone violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1045, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type quinacridone violet. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1028 | AB Chimica srl | UWS 1028, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type cobalt blue. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1028, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type cobalt blue. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1007 | AB Chimica srl | UWS 1007, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1007, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1011 | AB Chimica srl | UWS 1011, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type bright red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1011, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type bright red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1012 | AB Chimica srl | UWS 1012, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1012, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1037 | AB Chimica srl | UWS 1037, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type green chrome oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1037, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type green chrome oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1044 | AB Chimica srl | UWS 1044, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1044, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent yellow iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1005 | AB Chimica srl | UWS 1005, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1005, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent red iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1048 | AB Chimica srl | UWS 1048, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent brown iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1048, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type transparent brown iron oxide. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1006 | AB Chimica srl | UWS 1006, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type nickel antimony titanate yellow . It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1006, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 60% of pigment type nickel antimony titanate yellow . It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1063 | AB Chimica srl | UWS 1063, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type bismuth vanadate yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1063, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 55% of pigment type bismuth vanadate yellow. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1008 | AB Chimica srl | UWS 1008, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type azoic red P.R. 112. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1008, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type azoic red P.R. 112. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1046 | AB Chimica srl | UWS 1046, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type azoic red P.R. 170. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1046, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 35% of pigment type azoic red P.R. 170. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1068 | AB Chimica srl | UWS 1068, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 36% of pigment type red anthanthrone dibromate. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1068, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 36% of pigment type red anthanthrone dibromate. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1036 | AB Chimica srl | UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1038 | AB Chimica srl | UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1038, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 10% of pigment type green chlorinated copper phthalocyanine. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1097 | AB Chimica srl | UWS 1097, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type medium jetness black MCF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1097, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 25% of pigment type medium jetness black MCF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1098 | AB Chimica srl | UWS 1098, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type medium jetness black MCF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1098, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 5% of pigment type medium jetness black MCF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1099 | AB Chimica srl | UWS 1099, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 20% of pigment type high jetness black HCF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1099, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 20% of pigment type high jetness black HCF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
CRYLCOAT® 1501-6 | Allnex | CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperature...Vea Mas CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance. Vea Menos | Request Sample |
GENOMER* 6083/HD | Rahn AG | GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, plastic, and paper coatings; and pigment master batches. The product is used in association with urethane acrylates, polyester or epoxy...Vea Mas GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, plastic, and paper coatings; and pigment master batches. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. Vea Menos | Request Sample |
GENOMER* 4269/M22 | Rahn AG | GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and varnishes for plastic foils (PVC, PE etc.). The cured oligomer provides excellent mechanical properties. It is used in association with urethane acrylates, polyester or epoxy...Vea Mas GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and varnishes for plastic foils (PVC, PE etc.). The cured oligomer provides excellent mechanical properties. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. Vea Menos | Request Sample |
AFCONA - 4201 | AFCONA Additives Sdn Bhd | AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solvent free. AFCONA – 4201 is suitable for use in polyurethane, epoxy...Vea Mas AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solvent free. AFCONA – 4201 is suitable for use in polyurethane, epoxy, polyester/melanine, alkyd/melanine, acid curing, NC, and ultraviolet systems, finding application in high solid coatings, and ink formulations. Vea Menos | |
UWS 1003 | AB Chimica srl | UWS 1003, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 42% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1003, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 42% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1004 | AB Chimica srl | UWS 1004, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 15% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1004, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 15% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
UWS 1056 | AB Chimica srl | UWS 1056, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy...Vea Mas UWS 1056, in the form of a paste, is pigment dispersion with the dispersion medium of wetting and dispersing polymeric agents, and has 40% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with dispersion, emulsions, water-based resins in solution, and has applications in bi-component and mono acrylic and polyurethane, epoxy inks and paints, quick-drying enamels, oven baking enamels, and wood stains. Vea Menos | |
EBECRYL® 3748/20 | Allnex | EBECRYL® 3748/20 is a bisphenol A epoxy diacrylate, diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480)(1) for reduced viscosity and easier handling. \r\nEBECRYL® 3748/20 exhibits light color and fast cure response....Vea Mas EBECRYL® 3748/20 is a bisphenol A epoxy diacrylate, diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480)(1) for reduced viscosity and easier handling. \r\nEBECRYL® 3748/20 exhibits light color and fast cure response. Films of EBECRYL® 3748/20 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance. Vea Menos | Request Sample |
BECKOPOX™ VEP 2382w/55WA | Allnex | Dispersión de epoxi en agua. | Request Sample |
BECKOPOX™ EP 147w | Allnex | Epóxido agua-reducible de sólidos del 100% que contiene surfactantes reactivos. | Request Sample |
RESYDROL® AX 906w/35WA | Allnex | Resydrol® AX 906W/35WA es una resina alquídica, sin aceite, de resina epoxi modificada, diluible en agua, con excelentes propiedades anti-corrosivas, excelente humectación de pigmentos, alta reactividad y muy buena estabilidad de almacenamiento. Diseñada...Vea Mas Resydrol® AX 906W/35WA es una resina alquídica, sin aceite, de resina epoxi modificada, diluible en agua, con excelentes propiedades anti-corrosivas, excelente humectación de pigmentos, alta reactividad y muy buena estabilidad de almacenamiento. Diseñada para ser utilizada en pinturas en las que no se debe exceder el contenido de co-solvente de aproximadamente 5%. Vea Menos | Request Sample |
EBECRYL® 4266 | Allnex | EBECRYL® 4266 es un acrilato epoxi aromático modificado sin diluyente reactivo que se usa en la formulación de revestimientos curables con energía UV/EB. Los revestimientos a base de este producto se caracterizan por su fácil lijado y alta resistencia a l...Vea Mas EBECRYL® 4266 es un acrilato epoxi aromático modificado sin diluyente reactivo que se usa en la formulación de revestimientos curables con energía UV/EB. Los revestimientos a base de este producto se caracterizan por su fácil lijado y alta resistencia a la abrasión. Los polímeros curados con UV/EB de EBECRYL® 4266 muestran un equilibrio de dureza y flexibilidad. Está diseñado para usarse en la formulación de revestimientos curables con energía UV/EB para la aplicación con rodillo, espray y revestimiento de cortina en madera, corcho, muebles, papel, parqué y película. Vea Menos | Request Sample |
AFCONA - 5290 | AFCONA Additives Sdn Bhd | AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds application in solvent-based systems from low to high polarity including air dry alkyds, in high solid coatings such as polyurethane, epoxy...Vea Mas AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds application in solvent-based systems from low to high polarity including air dry alkyds, in high solid coatings such as polyurethane, epoxy, and ultraviolet coatings, and as a dispersant for ink formulations. Vea Menos | |
AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy...Vea Mas AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. Vea Menos | |
DUROXYN® VAX 6127w/42WA | Allnex | Ester de resina epoxi de secado oxidativo en forma de emulsión acuosa. Excelente resistencia a la corrosión, estabilidad en el agua muy buena, buena capacidad de repintado. | Request Sample |
DAOTAN® VTW 1686/40WA | Allnex | Dispersión de acrílico, poliéster-modificada, que contiene grupos de epoxi usados como el único aglutinante, o en combinación con resinas de melamina y/o dispersiones de poliuretano, para la producción de pinturas industriales diluibles en agua, como ser ...Vea Mas Dispersión de acrílico, poliéster-modificada, que contiene grupos de epoxi usados como el único aglutinante, o en combinación con resinas de melamina y/o dispersiones de poliuretano, para la producción de pinturas industriales diluibles en agua, como ser revestimientos base. Vea Menos | Request Sample |
MIRAMER M600 | Rahn AG | MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and overprint varnishes. The cured product provides very high cross linked density and chemical resistance. It is used up to 70% in association with urethane acrylates, polyester or epoxy...Vea Mas MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and overprint varnishes. The cured product provides very high cross linked density and chemical resistance. It is used up to 70% in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. Vea Menos | Request Sample |
GENOMER* 7151 | Rahn AG | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy...Vea Mas GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. Vea Menos | Request Sample |
CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy...Vea Mas CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. Vea Menos | |
EBECRYL® 600 | Allnex | Ebecryl® 600 es el éster diacrilato de una resina epoxi de bisfenol A. Este producto se caracteriza por su color claro y respuesta rápida de curado. Ebecryl® 600 encuentra amplio uso en aplicaciones bajo UV/EB, incluidas tintas, recubrimientos y barnices ...Vea Mas Ebecryl® 600 es el éster diacrilato de una resina epoxi de bisfenol A. Este producto se caracteriza por su color claro y respuesta rápida de curado. Ebecryl® 600 encuentra amplio uso en aplicaciones bajo UV/EB, incluidas tintas, recubrimientos y barnices de sobreimpresión. Vea Menos | Request Sample |
ADDITOL® VXW 6235 | Allnex | Additol® VXW 6235 es un retardante de espuma que se recomienda principalmente para materiales de revestimiento en polvo a utilizar en sistemas acuosos como: pinturas emulsionadas, sistemas epoxi de dos componentes, yesería, compuestos de relleno e incrust...Vea Mas Additol® VXW 6235 es un retardante de espuma que se recomienda principalmente para materiales de revestimiento en polvo a utilizar en sistemas acuosos como: pinturas emulsionadas, sistemas epoxi de dos componentes, yesería, compuestos de relleno e incrustantes, compuestos para piso y adhesivos. Vea Menos | Request Sample |
SiSiB® PC1100 | SiSiB SILICONES | SiSiB® PC1100 is a colorless transparent liquid. It is a is a versatile amino-functional coupling agent. It is applied in plastic products, rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials, metallic casting resins and resins concrete, etc; it maximizes the physical and electrical properties of mineral-filled phenolics, epoxies, polyamides, polybutylene terephthalate, and a host of other thermoset and thermoplastic composites; improves adhesion between magnetic powder and organic resins and dispersion of magnetic powder inorganic resins; improves pigment dispersion and maximizes adhesion to glass, aluminum, and steel with nitrile, polysulfide, epoxy, urethane, and adhesives and sealants; imparts moisture resistance and allows recovery after compression when used as a phenolics resin binder additive in glass fiber and mineral wool insulation; strengthens the bond between the phenolics binder and foundry sand in shell molding foundry applications; promotes an improved, water-resistant bond between the abrasive grit and phenolics resin binder in grinding wheels; and works as an adhesion promoter in urethane, epoxy...Vea Mas SiSiB® PC1100 is a colorless transparent liquid. It is a is a versatile amino-functional coupling agent. It is applied in plastic products, rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials, metallic casting resins and resins concrete, etc; it maximizes the physical and electrical properties of mineral-filled phenolics, epoxies, polyamides, polybutylene terephthalate, and a host of other thermoset and thermoplastic composites; improves adhesion between magnetic powder and organic resins and dispersion of magnetic powder inorganic resins; improves pigment dispersion and maximizes adhesion to glass, aluminum, and steel with nitrile, polysulfide, epoxy, urethane, and adhesives and sealants; imparts moisture resistance and allows recovery after compression when used as a phenolics resin binder additive in glass fiber and mineral wool insulation; strengthens the bond between the phenolics binder and foundry sand in shell molding foundry applications; promotes an improved, water-resistant bond between the abrasive grit and phenolics resin binder in grinding wheels; and works as an adhesion promoter in urethane, epoxy, and acrylic latex coatings, adhesives, and sealants. Vea Menos | |
DUROXYN® SEF 968w | Allnex | Duroxyn® SEF 968w es un éster de resina epoxi sin secado. Se utiliza como aglutinante de fibra de vidrio. Se procesa como aprox. 33% de emulsión en agua. Para la producción de la emulsión Duroxyn SEF 968w, se calienta a una temperatura de aprox. 50 °C. | Request Sample |
CRYLCOAT® 1770-0 | Allnex | CRYLCOAT® 1770-0 es una resina de poliéster carboxilo funcional para usar con resinas epoxi en proporciones de 70/30 para la fabricación de revestimientos híbridos en polvo. CRYLCOAT® 1770-0 se puede mezclar en todas las proporciones con CRYLCOAT® 1783-0 ...Vea Mas CRYLCOAT® 1770-0 es una resina de poliéster carboxilo funcional para usar con resinas epoxi en proporciones de 70/30 para la fabricación de revestimientos híbridos en polvo. CRYLCOAT® 1770-0 se puede mezclar en todas las proporciones con CRYLCOAT® 1783-0 para proporcionar reactividad intermedia. Vea Menos | Request Sample |
BECKOPOX™ EM 2120w/45WA | Allnex | Una dispersión de epoxi-amina-aducto en agua, conteniendo cantidades muy pequeñas de co-solvente orgánico. Beckopox EM 2120w es adecuado para formular revestimientos-base anticorrosivos transmitidos por agua de 1 paquete, y revestimientos individuales ...Vea Mas Una dispersión de epoxi-amina-aducto en agua, conteniendo cantidades muy pequeñas de co-solvente orgánico. Beckopox EM 2120w es adecuado para formular revestimientos-base anticorrosivos transmitidos por agua de 1 paquete, y revestimientos individuales de 1 paquete con buenas propiedades anticorrosivas, especialmente en el acero liso. Vea Menos | Request Sample |
RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG es una resina alquídica sin secado de resina epoxi modificada, después de la neutralización con aminas diluibles en agua. Se utiliza para imprimadores de inmersión y por pulverización resistentes a la corrosión a base de agua con se...Vea Mas Resydrol® AX 246W/70BG es una resina alquídica sin secado de resina epoxi modificada, después de la neutralización con aminas diluibles en agua. Se utiliza para imprimadores de inmersión y por pulverización resistentes a la corrosión a base de agua con secado a bajas temperaturas. También se utiliza para acabados de una sola capa de alta calidad a base de agua para aplicaciones industriales. Vea Menos | Request Sample |
CRYLCOAT® 1702-0 | Allnex | CRYLCOAT® 1702-0 es una resina de poliéster carboxilo funcional de baja reactividad para usar en una proporción de 70/30 en revestimientos híbridos de polvo. Los sistemas a base de CRYLCOAT® 1702-0 exhiben excelentes propiedades mecánicas, muy buen flujo ...Vea Mas CRYLCOAT® 1702-0 es una resina de poliéster carboxilo funcional de baja reactividad para usar en una proporción de 70/30 en revestimientos híbridos de polvo. Los sistemas a base de CRYLCOAT® 1702-0 exhiben excelentes propiedades mecánicas, muy buen flujo y resistencia al sobrehorneado. Vea Menos | Request Sample |
Silane Coupling Agent KH-602 | Zhejiang Feidian Chemical Co., Ltd. | KH-602 es un líquido fuertemente alcalino, incoloro, con olor a amina, muy sensible a la hidrólisis. Es un silano diamino-funcional capaz de proporcionar buena adherencia, excelente elongación y flexibilidad en interfases de sustratos de polímero. Se util...Vea Mas KH-602 es un líquido fuertemente alcalino, incoloro, con olor a amina, muy sensible a la hidrólisis. Es un silano diamino-funcional capaz de proporcionar buena adherencia, excelente elongación y flexibilidad en interfases de sustratos de polímero. Se utiliza para promover la adherencia entre refuerzos de superficies de vidrio o mineral y de metal, aditivos o sustratos y resinas que reaccionan con grupos amino en sistemas como plastisol de PVC, poliuretano o adhesivos y selladores a base de epoxi o en compuestos fenólicos y de moldeo epoxi. Su funcionalidad alcoxi reducida también puede ser útil en sistemas a base de agua, como revestimientos de látex, adhesivos y selladores, lo que proporciona menor reactividad y, por lo tanto, mayor estabilidad en entornos acuosos. Vea Menos | |
BECKOPOX™ EP 387w/52WA | Allnex | BECKOPOX® EP 387w/52WA es una resina epoxi sólida flexible. Es adecuada para imprimadores de protección anticorrosiva con muy buena adhesión a la mayoría de los sustratos metálicos. También es adecuada para su uso en sistemas de una sola capa y decorativo...Vea Mas BECKOPOX® EP 387w/52WA es una resina epoxi sólida flexible. Es adecuada para imprimadores de protección anticorrosiva con muy buena adhesión a la mayoría de los sustratos metálicos. También es adecuada para su uso en sistemas de una sola capa y decorativos para sustratos metálicos. Para óptima protección contra la corrosión se recomienda el uso de 75% de la cantidad estequiométrica del agente de curado. Vea Menos | Request Sample |
Polimer 3100 | Polidur San Luis | Poliester acrilado al 100%. Características principales: Buena velocidad de curado, Baja dureza, Excelente brillo. Aplicaciones: Lacas y barnices para plástico y papel, Lacas y barnices para madera, Plastificante de epoxi acrilada. | |
Siltech® C-42 | Siltech Corp. | Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. It is also compatible in solvent-borne coating system, and with most of the resins used in the coatings industry including acrylic, alkyd, polyurethane, polyester and epoxy...Vea Mas Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. It is also compatible in solvent-borne coating system, and with most of the resins used in the coatings industry including acrylic, alkyd, polyurethane, polyester and epoxy resins. This product is 100% active and is soluble in aliphatic and aromatic solvents. Vea Menos | |
CRYLCOAT® 1797-3 | Allnex | CRYLCOAT® 1797-3 es una resina de poliéster carboxilado tribo aplicable, de reactividad media para usar con resinas epoxi EEW 700-900 en una proporción de 70/30 para la fabricación de revestimientos híbridos en polvo. Los revestimientos a base de CRYLCOAT...Vea Mas CRYLCOAT® 1797-3 es una resina de poliéster carboxilado tribo aplicable, de reactividad media para usar con resinas epoxi EEW 700-900 en una proporción de 70/30 para la fabricación de revestimientos híbridos en polvo. Los revestimientos a base de CRYLCOAT® 1797-3 exhiben buen flujo y buen brillo. Vea Menos | Request Sample |
CRYLCOAT® 1573-0 | Allnex | CRYLCOAT® 1573-0 es una resina de poliéster carboxilo funcional medianamente reactiva para usar con resinas epoxi PEE 700-900 en una proporción de 50/50 para la fabricación de revestimientos híbridos en polvo. Las formulaciones a base de CRYLCOAT®1573-0 e...Vea Mas CRYLCOAT® 1573-0 es una resina de poliéster carboxilo funcional medianamente reactiva para usar con resinas epoxi PEE 700-900 en una proporción de 50/50 para la fabricación de revestimientos híbridos en polvo. Las formulaciones a base de CRYLCOAT®1573-0 exhiben un excelente flujo con muy buen brillo. Vea Menos | Request Sample |
CRYLCOAT® 1781-0 | Allnex | CRYLCOAT® 1781-0 es una resina de poliéster carboxilo funcional para usar con resinas epoxi en una proporción de 70/30 para la fabricación de revestimientos híbridos en polvo. Las formulaciones a base de CRYLCOAT® 1781-0 proporcionan buen flujo y muy buen...Vea Mas CRYLCOAT® 1781-0 es una resina de poliéster carboxilo funcional para usar con resinas epoxi en una proporción de 70/30 para la fabricación de revestimientos híbridos en polvo. Las formulaciones a base de CRYLCOAT® 1781-0 proporcionan buen flujo y muy buen brillo con una temperatura de transición vítrea muy alta. Vea Menos | Request Sample |
GENOMER* 2312 | Rahn AG | GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of ...Vea Mas GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of applications, all with the benefit of low skin irritancy. This product is useful in dispersions where excellent pigment wetting contributes to inks with high gloss, color hold out and substrate adhesion. Likewise, in coatings for paper, metal and wood, GENOMER* 2312 contributes to excellent toughness, flexibility, crease and scuff resistance. Vea Menos | Request Sample |
Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy...Vea Mas Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. Vea Menos | |
CYMEL® U-1052-8 | Allnex | La resina CYMEL® U-1052-8 es un agente reticulador de urea y formaldehido n-butilado suministrado en una mezcla de n-butanol y sileno. Tiene una excelente compatibilidad con resinas epoxi y es particularmente adecuado para revestimientos interiores de lat...Vea Mas La resina CYMEL® U-1052-8 es un agente reticulador de urea y formaldehido n-butilado suministrado en una mezcla de n-butanol y sileno. Tiene una excelente compatibilidad con resinas epoxi y es particularmente adecuado para revestimientos interiores de latas, donde contribuye a la buena adhesión y a la resistencia a la pasteurización. Vea Menos | Request Sample |
BECKOPOX™ EP 2392w/70MP | Allnex | Beckopox® EP 2392w/70MP es una resina epoxi sólida flexibilizada, emulsionable en agua, que se diluye en metoxipropanol. Esta solución puede ser fácilmente emulsionada con agua en un mezclador de alta velocidad para lograr una dispersión estable. Este pro...Vea Mas Beckopox® EP 2392w/70MP es una resina epoxi sólida flexibilizada, emulsionable en agua, que se diluye en metoxipropanol. Esta solución puede ser fácilmente emulsionada con agua en un mezclador de alta velocidad para lograr una dispersión estable. Este producto se utiliza para formular imprimaciones anticorrosivas y acabados singulares. Debido a su forma de suministro sin agua, este producto es muy adecuado para el procesamiento de los pigmentos sensibles al agua, como el polvo de zinc; tales imprimadores ricos en zinc exhiben excelentes propiedades anticorrosivas. Vea Menos | Request Sample |
GENOMER* 4267 | Rahn AG | GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy...Vea Mas GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is recommended for use in the following applications: non-yellowing industrial coatings; coatings for automotive applications and mobile phones; printing inks and varnishes; adhesives; and flexibilizer for corrosion-resistant systems. Vea Menos | Request Sample |
DUROFTAL® PE 6607/60BGMP | Allnex | Duroftal® PE 6607/60BGMP es una resina de poliéster sin aceite. Ha sido especialmente desarrollada como reemplazo de las resinas epoxi para revestimientos interiores y exteriores de productos metálicos de embalaje (revestimiento de latas). Cuando se combi...Vea Mas Duroftal® PE 6607/60BGMP es una resina de poliéster sin aceite. Ha sido especialmente desarrollada como reemplazo de las resinas epoxi para revestimientos interiores y exteriores de productos metálicos de embalaje (revestimiento de latas). Cuando se combinan con resinas fenólicas o resinas amino, estas lacas no contienen BADGE ni bisfenol A. Vea Menos | Request Sample |
CYMEL® U-227-8 | Allnex | CYMEL® U-227-8 es un agente reticulante de urea parcialmante n-butilado con un grado medio de alquidación, contenido medio de metinol, baja funcionalidad de imino, peso molecular de medio a bajo y viscosidad media. Se recomienda para usar en imprimadores ...Vea Mas CYMEL® U-227-8 es un agente reticulante de urea parcialmante n-butilado con un grado medio de alquidación, contenido medio de metinol, baja funcionalidad de imino, peso molecular de medio a bajo y viscosidad media. Se recomienda para usar en imprimadores epoxi o metálicos de urea, revestimientos decorativos de metal y barnices de inmersión y cilindros. Vea Menos | Request Sample |
Silane Coupling Agent KH-7180 | Zhejiang Feidian Chemical Co., Ltd. | KH-7180 es un epoxi órgano reactivo versátil con dos grupos etoxi hidrolizables. Proporciona un rendimiento estable y facilita la adherencia sin amarillamiento mientras mejora las propiedades físicas de látex y de los sistemas de selladores y adhesivos a ...Vea Mas KH-7180 es un epoxi órgano reactivo versátil con dos grupos etoxi hidrolizables. Proporciona un rendimiento estable y facilita la adherencia sin amarillamiento mientras mejora las propiedades físicas de látex y de los sistemas de selladores y adhesivos a base de agua. Este producto se recomienda para adhesivos automotrices laminados, adhesivos de muebles laminados y adhesivos para flock. Vea Menos | |
CRYLCOAT® 1783-0 | Allnex | CRYLCOAT® 1783-0 es una resina de poliéster carboxilado de baja reactividad para usar con resinas epoxi en la elaboración de revestimientos híbridos en polvo en una proporción de 70/30. Las formulaciones a base de CRYLCOAT® 1783-0 exhiben muy buen brillo ...Vea Mas CRYLCOAT® 1783-0 es una resina de poliéster carboxilado de baja reactividad para usar con resinas epoxi en la elaboración de revestimientos híbridos en polvo en una proporción de 70/30. Las formulaciones a base de CRYLCOAT® 1783-0 exhiben muy buen brillo y flujo se pueden mezclar en todas las proporciones con CRYLCOAT® 1770-0 para controlar la reactividad. Vea Menos | Request Sample |
EBECRYL® 1608 | Allnex | EBECRYL® 1608 is a diacrylate ester of bisphenol A epoxy resin diluted with 15% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and very fast cure response. Formulated UV/EB curable products contain...Vea Mas EBECRYL® 1608 is a diacrylate ester of bisphenol A epoxy resin diluted with 15% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and very fast cure response. Formulated UV/EB curable products containing EBECRYL® 1608 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. EBECRYL® 1608 is recommended for use in: overprint varnishes, lithographic and screen inks and varnishes, coatings on wood, cardboard, chipboard, paper and rigid plastics, paper upgrading, and coatings where low residual odour is required. Vea Menos | Request Sample |
Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy...Vea Mas Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. Vea Menos | |
AFCONA - 3280 | AFCONA Additives Sdn Bhd | AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy...Vea Mas AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy flooring compounds, and in ultraviolet-curing inks and coatings. Vea Menos | |
ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...Vea Mas ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. Vea Menos | Request Sample |
AFCONA - 2040 | AFCONA Additives Sdn Bhd | AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side effects. AFCONA – 2040 finds application in low to high polar paint systems, physical drying systems based on acrylic, vinyl, or chlorinated polymers, in polyurethane wood, plastic, and car refinishes, in airless spraying coats, in NC lacquers and acid curing wood and general industrial coatings, in stoving paints, in solvent-based epoxy...Vea Mas AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side effects. AFCONA – 2040 finds application in low to high polar paint systems, physical drying systems based on acrylic, vinyl, or chlorinated polymers, in polyurethane wood, plastic, and car refinishes, in airless spraying coats, in NC lacquers and acid curing wood and general industrial coatings, in stoving paints, in solvent-based epoxy systems, and in printing inks. Vea Menos | |
Propylene carbonate | BASF SE, Intermediates Division | Solvente para resinas polares, como ser: poliésteres, poliuretanos, imidas de poliéster y plastificantes. El carbonato de propileno es adecuado para esmaltes de alambre a base poliéster, poliuretanos, poliesterimidos, y resinas de epóxido y de fenol. E...Vea Mas Solvente para resinas polares, como ser: poliésteres, poliuretanos, imidas de poliéster y plastificantes. El carbonato de propileno es adecuado para esmaltes de alambre a base poliéster, poliuretanos, poliesterimidos, y resinas de epóxido y de fenol. El carbonato de propileno es un solvente altamente polar. Una versión modificada, PCA de Solvarnol® puede substituir el fenol, los cresoles y los xilenoles en formulaciones de aislamiento eléctrico. Vea Menos | |
Silane Coupling Agent KH-551 | Zhejiang Feidian Chemical Co., Ltd. | KH-551 es un silano amino-funcional que puede utilizarse en una amplia gama de aplicaciones para mejorar la unión entre un sustrato, aditivo o refuerzo y las resinas que reaccionan con el grupo amino. Se recomienda especialmente en resinas termoplásticas ...Vea Mas KH-551 es un silano amino-funcional que puede utilizarse en una amplia gama de aplicaciones para mejorar la unión entre un sustrato, aditivo o refuerzo y las resinas que reaccionan con el grupo amino. Se recomienda especialmente en resinas termoplásticas y termoestables como las resinas epoxi, PBT y de poliuretano. Puede mejorar las propiedades físicas del plástico reforzado y las propiedades eléctricas como la resistencia a la flexión, la resistencia a la compresión y la resistencia al corte. KH-551 también puede mejorar la dispersión y la capacidad en estado húmedo de aditivos en materiales de alto peso molecular. Es un excelente sellador y promotor de adherencia (como poliuretano, epoxi y fenol). En los productos de lana de vidrio y FRP, puede añadirse en resinas de fenol para mejorar la resistencia en húmedo y el rendimiento mecánico. Vea Menos | |
Melapol 1010-60 B | Polidur San Luis | Resina de melamina-formol butilada al 60 % en xileno-butanol. Propiedades : Mediana reactividad. Buena dureza final de los esmaltes horneables. Buena compatibilidad con gran variedad de alkyds. Aplicaciones : Esmaltes horneables combinada con : alkyds cor...Vea Mas Resina de melamina-formol butilada al 60 % en xileno-butanol. Propiedades : Mediana reactividad. Buena dureza final de los esmaltes horneables. Buena compatibilidad con gran variedad de alkyds. Aplicaciones : Esmaltes horneables combinada con : alkyds cortos, alkyds medianos, alkyds largos dependiendo balance de solventes, esteres de epoxi. Vea Menos | |
BECKOPOX™ EP 2340w/56WA | Allnex | Este producto, sirve para los propósitos de prueba solamente. Es posible que ocurran desviaciones durante transferencia en la fabricación a una escala comercial, pero no constituyen ningún defecto material. | Request Sample |
BECKOPOX™ EM 460/60IBX | Allnex | Adherencia excelente a los metales de acero no ferrosos, alta protección contra la corrosión, provee el mejor repintado. | Request Sample |
Polimer 4008 | Polidur San Luis | Epoxi acrilada al 80% en Policure 5000. Características principales: Excelente velocidad de curado, Alta dureza y brillo, Alta versatilidad para distintas aplicaciones. Aplicaciones: Lacas y barnices para plástico y papel, Lacas y barnices para madera. | |
BECKOPOX™ EP 128 | Allnex | De viscosidad baja, resina de epoxi líquida diluida en reactivo. | Request Sample |
DISPERBYK®-142 | BYK | Aditivo humectante y de dispersión de peso molecular alto para sistemas transmitidos por solvente. Solución de una sal fosfórica de éster de un copolímero de peso molecular alto con grupos afines al pigmento. | |
Melapol 1040-60 B | Polidur San Luis | Resina de melamina-formol butilada al 60 % en butanol. Propiedades : Mediana reactividad. Buena dureza final de los esmaltes horneables. Buena compatibilidad con gran variedad de alkyds y resinas acrílicas hidroxiladas. Aplicaciones : Esmaltes horneables ...Vea Mas Resina de melamina-formol butilada al 60 % en butanol. Propiedades : Mediana reactividad. Buena dureza final de los esmaltes horneables. Buena compatibilidad con gran variedad de alkyds y resinas acrílicas hidroxiladas. Aplicaciones : Esmaltes horneables combinada con : alkyds cortos y medianos, alkyds largos dependiendo balance de solventes, resinas acrílicas, esteres de epoxi. Vea Menos | |
CRYLCOAT® 1557-5 | Allnex | CRYLCOAT® 1557-5 es una resina de poliéster carboxilo funcional para usar con resinas epoxi en proporciones de 50/50 a 60/40 para la fabricación de revestimientos híbridos en polvo. Las formulaciones a base de CRYLCOAT® 1557-5 presentan una alta reactivid...Vea Mas CRYLCOAT® 1557-5 es una resina de poliéster carboxilo funcional para usar con resinas epoxi en proporciones de 50/50 a 60/40 para la fabricación de revestimientos híbridos en polvo. Las formulaciones a base de CRYLCOAT® 1557-5 presentan una alta reactividad, resistencia al rayado y buenas propiedades en general. CRYLCOAT® 1557-5 se puede mezclar en todas las proporciones con CRYLCOAT® 1544-4 para proporcionar reactividad intermedia. Vea Menos | Request Sample |