| ECOPOLBUILD 3 | Ecopol Tech | ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...Vea Mas ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion resistance. This product contains approximately 85% biobased products. Vea Menos | |
| EPODIL® 747 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain term...Vea Mas EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. It is ideal for use in flooring, mortars, and grouts, high and 100%-solids coatings, laminates, and potting compounds. Vea Menos | Request Sample |
| EPODIL® 757 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting...Vea Mas EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting compounds, mortars, grouts and flooring. Vea Menos | Request Sample |
| Epokukdo BGE | Kukdo Chemical Co., Ltd. | Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, ...Vea Mas Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, etc. Vea Menos | |
| Epokukdo KEM-128M | Kukdo Chemical Co., Ltd. | Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and...Vea Mas Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and water dispersible curing agent like KH-723 are applied for water thinned two pack coatings, coal tar modified paint and primer for steel, concrete, and other nonmetallic substrates. It is also applied for decorative wall, structural grouting, adhesives and mortar in order to improve adhesive property and physical properties of cement by adding 10-20wt% epoxy resin emulsion. Vea Menos | |
| Epokukdo KR-170 | Kukdo Chemical Co., Ltd. | Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used...Vea Mas Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used in formulating for the floor coating, molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. This product having medium-high viscosity is suitable for using in non-solvent adhesive, resin mortar, construction applications and flexible coating. KR-170 is particularly suitable for being applied on non-polar substrate surfaces such as PE or PP, greasy surface or oily surface of metals and so forth. Vea Menos | |
| Epokukdo LGE | Kukdo Chemical Co., Ltd. | Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volat...Vea Mas Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volatile content. Also, LGE provides good flexibility and adhesion on nonpolar surfaces. Therefore, LGE can be used in various paints, floor coating, etc. Vea Menos | |
| Epokukdo PG-202 | Kukdo Chemical Co., Ltd. | Epokukdo PG-202, difunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. Since difunctional diluents, in general, may cause poor physical properties, the minimum amount of need should ...Vea Mas Epokukdo PG-202, difunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. Since difunctional diluents, in general, may cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. PG-202, reactive diluent is suitable low volatile levels. Therefore, problems generated from poorly ventilated areas are minimized. It is recommended for laminates, exposed aggregate, potting and flooring applications. Vea Menos | |
| Epokukdo UME-305 | Kukdo Chemical Co., Ltd. | Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...Vea Mas Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. Vea Menos | |
| Epokukdo UME-315 | Kukdo Chemical Co., Ltd. | Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...Vea Mas Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. Vea Menos | |
| Epokukdo UME-330 | Kukdo Chemical Co., Ltd. | Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact s...Vea Mas Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. Vea Menos | |
| Epokukdo YD-112 | Kukdo Chemical Co., Ltd. | Epokukdo YD-112 is a Bisphenol-A type liquid epoxy resin diluted with PGE. YD-112 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-112 is generally used in high...Vea Mas Epokukdo YD-112 is a Bisphenol-A type liquid epoxy resin diluted with PGE. YD-112 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-112 is generally used in high solid coating, floor coating, troweling application, crack injection systems, adhesives and decoupage systems. Vea Menos | |
| Epokukdo YD-113 | Kukdo Chemical Co., Ltd. | Epokukdo YD-113 is a Bisphenol-A type liquid epoxy resin diluted with CGE. YD-113 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-113 is generally used in high...Vea Mas Epokukdo YD-113 is a Bisphenol-A type liquid epoxy resin diluted with CGE. YD-113 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-113 is generally used in high solid coating, floor coating, troweling application, crack injection systems, adhesives and decoupage systems. Vea Menos | |
| Epokukdo YD-114 | Kukdo Chemical Co., Ltd. | Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic mini...Vea Mas Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. Vea Menos | |
| Epokukdo YD-114E | Kukdo Chemical Co., Ltd. | Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic mi...Vea Mas Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coating. Vea Menos | |
| Epokukdo YD-114EF | Kukdo Chemical Co., Ltd. | Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxi...Vea Mas Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings. Vea Menos | |
| Epokukdo YD-114F | Kukdo Chemical Co., Ltd. | Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic...Vea Mas Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings Vea Menos | |
| Epokukdo YD-119 | Kukdo Chemical Co., Ltd. | Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is gen...Vea Mas Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. Vea Menos | |
| Epotec® YD 012 X 75 | Aditya Birla | Epotec® YD 012 X 75 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved in xylene. This product is mainly used in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. | |
| Epotec® YD 127LC | Aditya Birla | Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical,...Vea Mas Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, and construction applications. Vea Menos | |
| Epotec® YD 128 EL | Aditya Birla | Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for ...Vea Mas Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. Vea Menos | |
| Epotec® YD 128 J | Aditya Birla | Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free co...Vea Mas Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free coatings, adhesives, and construction, electrical, & electronics applications. Vea Menos | |
| Epotec® YD 128 R | Aditya Birla | Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...Vea Mas Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. Vea Menos | |
| Epotec® YD 128 X | Aditya Birla | Epotec® YD 128 X is a modified, medium viscosity, bisphenol-A-based epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, elec...Vea Mas Epotec® YD 128 X is a modified, medium viscosity, bisphenol-A-based epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, electronic, and flooring applications. Vea Menos | |
| Epotec® YD 128 XX | Aditya Birla | Epotec® YD 128 XX is a medium viscosity, bisphenol-A-based modified epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, elec...Vea Mas Epotec® YD 128 XX is a medium viscosity, bisphenol-A-based modified epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, electronic, and flooring applications. Vea Menos | |
| Epotec® YD 129 | Aditya Birla | Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring appli...Vea Mas Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. Vea Menos | |
| Epotec® YD 134 | Aditya Birla | Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based co...Vea Mas Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based coatings, construction coatings & systems, and electrical & electronic applications. Vea Menos | |
| Epotec® YD 134 A | Aditya Birla | Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protectiv...Vea Mas Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protective coatings. Vea Menos | |
| Epotec® YD 134 X 80 | Aditya Birla | Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...Vea Mas Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. Vea Menos | |
| Epotec® YD 134 X 90 | Aditya Birla | Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...Vea Mas Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. Vea Menos | |
| Epotec® YD 508 | Aditya Birla | Epotec® YD 508 is a low viscosity, reactive diluent-modified liquid epoxy resin with a low crystallization tendency and good handling characteristics. This product is ideal for use in high solids coatings, self-leveling floor applications, and chemical re...Vea Mas Epotec® YD 508 is a low viscosity, reactive diluent-modified liquid epoxy resin with a low crystallization tendency and good handling characteristics. This product is ideal for use in high solids coatings, self-leveling floor applications, and chemical resistant coatings. Vea Menos | |
| Epotec® YD 510 | Aditya Birla | Epotec® YD 510 is a low viscosity, reactive diluent-modified liquid epoxy resin which promotes low voc content and reduced crystallization tendency in final formulations. This product is ideal for use in high solids coatings, flooring applications, and pr...Vea Mas Epotec® YD 510 is a low viscosity, reactive diluent-modified liquid epoxy resin which promotes low voc content and reduced crystallization tendency in final formulations. This product is ideal for use in high solids coatings, flooring applications, and primers. Vea Menos | |
| Epotec® YD 515 | Aditya Birla | Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhe...Vea Mas Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhesives. Vea Menos | |
| Epotec® YD 517 V | Aditya Birla | Epotec® YD 517 V is a low viscosity, reactive diluent-modified liquid epoxy resin. This product is ideal for use in flooring applications and high solids coatings. | |
| Epotec® YD 522 | Aditya Birla | Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applicati...Vea Mas Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applications, high solids & solvent-free coatings, and adhesives. Vea Menos | |
| Epotec® YDF 170 | Aditya Birla | Epotec® YDF 170 is a general-purpose, unmodified, low viscosity diglycidyl ether of bisphenol-F which displays good chemical resistance. This product is ideal for use in adhesives for electronic applications, chemical resistance coatings, industrial floor...Vea Mas Epotec® YDF 170 is a general-purpose, unmodified, low viscosity diglycidyl ether of bisphenol-F which displays good chemical resistance. This product is ideal for use in adhesives for electronic applications, chemical resistance coatings, industrial flooring applications, and laminates. Vea Menos | |
| Epotec® YDF 170LV | Aditya Birla | Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coati...Vea Mas Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coatings, industrial flooring applications, and laminates. Vea Menos | |
| Epotec® YDF 172 | Aditya Birla | Epotec® YDF 172 is an unmodified, low viscosity diglycidyl ether of bisphenol-F which is specially formulated to avoid operational problems related to crystallization in geographical locations with low temperature winters. This product is ideal for use in...Vea Mas Epotec® YDF 172 is an unmodified, low viscosity diglycidyl ether of bisphenol-F which is specially formulated to avoid operational problems related to crystallization in geographical locations with low temperature winters. This product is ideal for use in chemical resistance coatings, industrial flooring applications, laminates, adhesives for electronic applications, solvent-free coatings, and filament winding applications. Vea Menos | |
| Epotec® YDF 173 | Aditya Birla | Epotec® YDF 173 is a higher functional novolac resin featuring improved thermal stability, hardness, mechanical strength, and resistance to various chemicals. This product is ideal for use in adhesives for electronic applications, chemical resistant coati...Vea Mas Epotec® YDF 173 is a higher functional novolac resin featuring improved thermal stability, hardness, mechanical strength, and resistance to various chemicals. This product is ideal for use in adhesives for electronic applications, chemical resistant coatings, industrial flooring applications, and laminates. Vea Menos | |
| Epotec® YDFM 251 | Aditya Birla | Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is i...Vea Mas Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. Vea Menos | |
| Epotec® YDFM 253 | Aditya Birla | Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface t...Vea Mas Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface tension. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. Vea Menos | |
| Epotec® YDFM 270 | Aditya Birla | Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & ...Vea Mas Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self-leveling flooring applications, and marine & industrial protective coatings. Vea Menos | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...Vea Mas Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. Vea Menos | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...Vea Mas Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. Vea Menos | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...Vea Mas Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. Vea Menos | |
| Estergum-752 | D.S.V. Chemicals Pvt. Ltd. | Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...Vea Mas Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. Vea Menos | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...Vea Mas EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. Vea Menos | |
| Filtrez™ 531 A | Lawter | Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-bas...Vea Mas Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-based flexographic and gravure inks and solvents. Vea Menos | |
| FORTCRYL 8520 | Oswaldo Cruz Quimica | FORTCRYL 8520 is an acrylic-vinyl copolymer in aqueous dispersion. It is compatible with most other anionic and non-ionic dispersions in the Oswaldo Cruz line. This product is also compatible with other acrylic thickeners and associative acrylic thickener...Vea Mas FORTCRYL 8520 is an acrylic-vinyl copolymer in aqueous dispersion. It is compatible with most other anionic and non-ionic dispersions in the Oswaldo Cruz line. This product is also compatible with other acrylic thickeners and associative acrylic thickeners in the market, but it is recommended to test before use. Vea Menos | |
| FORTCRYL ASR-17 | Oswaldo Cruz Quimica | FORTCRYL ASR-17 8520 is an acrylic copolymer in aqueous dispersion, free from plasticizers and solvents. It is a premium acrylic alkali soluble emulsion, therefore has broad compatibility with acrylic resins employed in floor finishes, and may also be emp...Vea Mas FORTCRYL ASR-17 8520 is an acrylic copolymer in aqueous dispersion, free from plasticizers and solvents. It is a premium acrylic alkali soluble emulsion, therefore has broad compatibility with acrylic resins employed in floor finishes, and may also be employed with a wide variety of wax emulsions. This enables the formulator numerous possibilities for carrying out their work in everyday life, without compromising the stability of the formulation. Vea Menos | |
| GRANUCOL® UP MGA/MGAFS | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | GRANUCOL® UP MGA/MGAFS is a blend of polyester granules (fully cured) and aluminium hydroxide. GRANUCOL® UP MGA/MGAFS is well suitable for highly decorative flooring applications. | |
| Graph'Up W3 | CARBON WATERS | Graph'Up W3 is a ready-to-use additive boosting anti-corrosion, UV resistance, anti-scratch, and anti-clogging performance of waterbased formulations. | |
| Hauthane HD-2113 | Hauthaway | Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without t...Vea Mas Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend. HD-2113 may be used as supplied or blended with acrylic emulsions for application by spray, rotogravure, reverse roll, flexible blade, or wire wound rod. Vea Menos | |
| Hauthane HD-2139 | Hauthaway | Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating du...Vea Mas Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. HD-2139 can be used as a sole vehicle or blended with acrylic emulsions and applied by rotogravure, reverse roll, flexible blade, or wire wound rod. It may be thickened for alternative application methods. Vea Menos | |
| Hauthane L-3385 | Hauthaway | Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-...Vea Mas Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. L-3385 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. Vea Menos | |
| HS23-60 | Tianyi Chemical Engineering Material Co., Ltd. | HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-re...Vea Mas HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-resistant characteristics. The end product will dry easily with a light-colored finish. Vea Menos | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...Vea Mas IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. Vea Menos | |
| Kingcure 800-C | Sanho Chemical Co., Ltd. | Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-F | Sanho Chemical Co., Ltd. | Kingcure 800-F is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s. Kingcure 800-F is most commonly used in construction adhesive formulation applications. | |
| KONDICRYL SV 166 | Pidilite Industries Ltd. - Resins Division | Da capas brillante y flexible que tiene una buena resistencia a la Gasolina. Kondicryl SV 166 tiene una amplia compatibilidad con otros vehículos de recubrimientos, tales como la Nitrocelulosa, Acetato Butirato de Celulosa y Vinilos. Kondicryl SV 166 pued...Vea Mas Da capas brillante y flexible que tiene una buena resistencia a la Gasolina. Kondicryl SV 166 tiene una amplia compatibilidad con otros vehículos de recubrimientos, tales como la Nitrocelulosa, Acetato Butirato de Celulosa y Vinilos. Kondicryl SV 166 puede ser utilizado como aglutinante para Recubrimientos de Uso General para Metales y Plásticos, Recubrimientos, Mampostería de Alto Rendimiento y Pinturas de Acabado Automotriz y Tintas. Vea Menos | |
| KONDICRYL SV 167 | Pidilite Industries Ltd. - Resins Division | Da capas brillante y flexible que tiene una buena resistencia a la Gasolina. Kondicryl SV 167 tiene una amplia compatibilidad con otros vehículos de recubrimientos, tales como la Nitrocelulosa y Vinilos. Kondicryl SV 167 puede ser utilizado como aglutinan...Vea Mas Da capas brillante y flexible que tiene una buena resistencia a la Gasolina. Kondicryl SV 167 tiene una amplia compatibilidad con otros vehículos de recubrimientos, tales como la Nitrocelulosa y Vinilos. Kondicryl SV 167 puede ser utilizado como aglutinante para recubrimientos de Uso General, Recubrimientos, Mampostería de Alto Rendimiento y Pinturas de Acabado de Automóviles y Tintas. Vea Menos | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...Vea Mas KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...Vea Mas KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...Vea Mas KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...Vea Mas KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...Vea Mas KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...Vea Mas KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1111 KT Polymer | Univar Solutions | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...Vea Mas KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...Vea Mas KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1111 KU Polymer | Univar Solutions | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...Vea Mas KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...Vea Mas KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...Vea Mas KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1113 PT Polymer | Univar Solutions | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...Vea Mas KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...Vea Mas KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...Vea Mas KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1114 PSM Polymer | Univar Solutions | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...Vea Mas KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...Vea Mas KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1114 PT Polymer | Univar Solutions | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...Vea Mas KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...Vea Mas KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...Vea Mas KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...Vea Mas KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1117 PT Polymer | Univar Solutions | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...Vea Mas KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...Vea Mas KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...Vea Mas KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...Vea Mas KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. Vea Menos | |
| KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...Vea Mas KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...Vea Mas KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ES Polymer | Univar Solutions | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...Vea Mas KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...Vea Mas KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ESM Polymer | Univar Solutions | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...Vea Mas KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...Vea Mas KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ET Polymer | Univar Solutions | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...Vea Mas KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...Vea Mas KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 ETM Polymer | Univar Solutions | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...Vea Mas KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...Vea Mas KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1118 KTM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low visco...Vea Mas KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KTM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1119 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness,...Vea Mas KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1119 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...Vea Mas KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1119 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...Vea Mas KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1119 PT Polymer | Univar Solutions | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...Vea Mas KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1124 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardnes...Vea Mas KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1124 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...Vea Mas KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1124 PT Polymer | Univar Solutions | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...Vea Mas KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1126 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...Vea Mas KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1126 PT Polymer | Univar Solutions | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...Vea Mas KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...Vea Mas KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1153 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...Vea Mas KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1153 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...Vea Mas KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...Vea Mas KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1155 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and...Vea Mas KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 BO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1155 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...Vea Mas KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1155 ES Polymer | Univar Solutions | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...Vea Mas KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. Vea Menos | |
| KRATON® D1155 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...Vea Mas KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. Vea Menos | |
| KRATON® D1155 JOP Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...Vea Mas KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. Vea Menos |
