| Reactol™ 1717H A | Lawter | Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment we...Vea Mas Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion. Reactol™ 1717H A is used in vinyl sealers and coatings, cellulose lacquers and in flexographic and rotogravure inks. Vea Menos | |
| Reactol™ 1979 A | Lawter | Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and ni...Vea Mas Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and nitrocellulose and can be cross-linked with melamine to create a glossy thermoset coating with good color retention. Reactol™ 1979 A is used in flexographic and gravure inks and in paper and wood coatings. Vea Menos | |
| Reactol™ 3107 A | Lawter | Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use ...Vea Mas Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use of the resin binder eliminates discoloration tendencies, leading to cleaner colors. The product is used in liquid inks and coatings and in wood stains and lacquers. Vea Menos | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...Vea Mas Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. Vea Menos | |
| Rebrygs D 70 | SGS Polimeros | Rebrygs D 70 is a ester in solution developed to confer prolonged tack. This product is used in the formulation of polychloroprene based adhesives. | |
| Rebrygs G 60 | SGS Polimeros | Rebrygs G 60 is a maleic resin in solution characterized by its drying, hardness, and melting point properties. This product is used in the formulation of sealants, flexographic varnishes and paints, lacquers, and in the preparation of polychloroprene bas...Vea Mas Rebrygs G 60 is a maleic resin in solution characterized by its drying, hardness, and melting point properties. This product is used in the formulation of sealants, flexographic varnishes and paints, lacquers, and in the preparation of polychloroprene based adhesives. Vea Menos | |
| Reflex Blue | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Reflex Blue is a transparent dark blue pigment paste featuring strong color strength and bright color. This product has a density of 1.22 g/cm3 and a pH value of 6-9, and it is commonly used in inks and high grade inks. | |
| Relca® PU-406 | Stahl Polymers | Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties,...Vea Mas Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties, good chemical resistance properties, good UV resistance properties, good heat resistance properties, and good adhesion properties. Vea Menos | |
| Relca® PU-415 | Stahl Polymers | Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...Vea Mas Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. Vea Menos | |
| Relca® PU-477 | Stahl Polymers | Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resi...Vea Mas Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resistance properties, good chemical resistance properties, good UV resistance properties, good hydrolysis resistance properties, and good adhesion properties with PVC, PUR, and pretreated TPO. Vea Menos | |
| Relca® PU-968 | Stahl Polymers | Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion p...Vea Mas Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion properties, and is crosslinkable at room temperature with polycarbodiimides. Vea Menos | |
| Resinate-776 | D.S.V. Chemicals Pvt. Ltd. | Resinate-776 is a calcium-based polymer. This product has a melting point range of 85-95 degrees Celsius. It can be used as a tackifier. It can also be used in low printing inks for absorbent stocks, paints, and economical liquid inks. | |
| Resinate-777 | D.S.V. Chemicals Pvt. Ltd. | Resinate-777 is a zinc-calcium polymer. This product has a melting point range of 105-115 degrees Celsius. It can be used as a tackifier, and in low printing inks for absorbent stocks, paints, and economical liquid inks. | |
| Resinate-778 | D.S.V. Chemicals Pvt. Ltd. | Resinate-778 is a calcium-magnesium polymer. This product has a melting point range of 145-155 degrees Celsius. It can be used in offset gravure inks, economical paints, and other printing ink media systems. | |
| Resygs CG 3070 | SGS Polimeros | Resygs CG 3070 is a pure alkydic resin, in cocunut oil, characterized by its flexibility, weather resistance, retention, color, and shine. This product is used in furniture paints, polyurethanic primers, sealants, varnishes, automotive repainting, and lac...Vea Mas Resygs CG 3070 is a pure alkydic resin, in cocunut oil, characterized by its flexibility, weather resistance, retention, color, and shine. This product is used in furniture paints, polyurethanic primers, sealants, varnishes, automotive repainting, and lacquers. Vea Menos | |
| Resygs MG 4860 | SGS Polimeros | Resygs MG 4860 is a pure alkyd resin, characterized by its weather resistance and flexibility. This product is used in paints, varnishes, primers, sealants, lacquers, and automotive repainting primers and varnishes. | |
| Resygs SPG 4060 | SGS Polimeros | Resygs SPG 4060 is a pure alkyd resin, characterized by its high viscosity, chemical resistance, and hardness. This product is used in furniture paints, primers, sealants, lacquers, fillers, and automotive repainting varnishes. | |
| Resygs SPG 5050 | SGS Polimeros | Resygs SPG 5050 is a conventional alkyd resin. This product is designed for mechanical paints, synthetic paints and primers, automotive repainting, dye concentrates, decorative enamels, and wood varnishes and sealants. | |
| Rexin 143 | S.A.P.I.C.I. SpA | Rexin 143 is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Rexin 1543 | S.A.P.I.C.I. SpA | Rexin 1543 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane...Vea Mas Rexin 1543 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane coatings. Vea Menos | |
| Rexin 160 | S.A.P.I.C.I. SpA | Rexin 160 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane ...Vea Mas Rexin 160 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane coatings. Vea Menos | |
| Rexin 2281/70X | S.A.P.I.C.I. SpA | Rexin 2281/70X is a short-oil alkyd resin. This product is compatible with short, medium or long oil alkyd resins, saturated polyesters, acrylic, epoxy, melamine or urea resins, and chetonic or maleic resins. It is incompatible with unsaturated polyeste...Vea Mas Rexin 2281/70X is a short-oil alkyd resin. This product is compatible with short, medium or long oil alkyd resins, saturated polyesters, acrylic, epoxy, melamine or urea resins, and chetonic or maleic resins. It is incompatible with unsaturated polyester or waterborne resins. It can be used as a binder for universal pigment pastes. Vea Menos | |
| Rexin 256 AB | S.A.P.I.C.I. SpA | Rexin 256 AB is a short-oil alkyd resin. This product has good gloss, high hardness, elasticity, and yellowing resistance. It can be used in clear or pigmented polyurethane coatings. It can also be used in combination with urea and melamine resins for ...Vea Mas Rexin 256 AB is a short-oil alkyd resin. This product has good gloss, high hardness, elasticity, and yellowing resistance. It can be used in clear or pigmented polyurethane coatings. It can also be used in combination with urea and melamine resins for stoving enamels, and as a binder for universal pigmented pastes. Vea Menos | |
| Rexin 5380 | S.A.P.I.C.I. SpA | Rexin 5380 is a short-oil alkyd resin. This product has good substrate wetting characteristics that high quality filling and levelling tendencies. It can be used in high-quality basecoats with a long pot life. | |
| Rexin DP 127 | S.A.P.I.C.I. SpA | Rexin DP 127 is a saturated polyester resin. This product has good abrasion and yellowing resistance. It can be used in high-gloss and fast-drying clear or pigmented 2K polyurethane coatings. It is particularly recommended for pigmented paste formulati...Vea Mas Rexin DP 127 is a saturated polyester resin. This product has good abrasion and yellowing resistance. It can be used in high-gloss and fast-drying clear or pigmented 2K polyurethane coatings. It is particularly recommended for pigmented paste formulations. Vea Menos | |
| Rexin DP 417 | S.A.P.I.C.I. SpA | Rexin DP 417 is a solventless saturated polyester resin. This product has good elasticity. It can be used in enamels and coatings for paper, leather, plastic and rubber. It is particularly used for the formation of soft-touch effect coatings. | |
| Rexin DP 430 | S.A.P.I.C.I. SpA | Rexin DP 430 is a solventless saturated polyester resin. This product has good elasticity. It can be used in coatings and enamels for leather, plastic, rubber and paper coatings. It is used to formulate soft-touch effect coatings. | |
| Rexin HS XP 2109 | S.A.P.I.C.I. SpA | Rexin HS XP 2109 is a short-oil alkyd resin. This product dries quickly with good adhesion to substrates. It can be used as a coating for formulations in extreme weather conditions. This product is suitable for high solid formulations, and shows good h...Vea Mas Rexin HS XP 2109 is a short-oil alkyd resin. This product dries quickly with good adhesion to substrates. It can be used as a coating for formulations in extreme weather conditions. This product is suitable for high solid formulations, and shows good hardness and solvent release. Vea Menos | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...Vea Mas Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. Vea Menos | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...Vea Mas Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. Vea Menos | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin XP 81 | S.A.P.I.C.I. SpA | Rexin XP 81 is a linear polyester polyol based on bio-derived succinic acid and glycol. This product combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 82 | S.A.P.I.C.I. SpA | Rexin XP 82 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 86 | S.A.P.I.C.I. SpA | Rexin XP 86 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rhenogran® Resorcin-80 | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber ...Vea Mas Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. Vea Menos | |
| Rhenogran® Resorcin-80 SBR | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber t...Vea Mas Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 SBR finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. Vea Menos | |
| RHEOBYK-100 | BYK | RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings an...Vea Mas RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings and general industrial coatings. RHEOBYK-100 is also particularly suitable for use in thick-layered epoxy and vinyl resin systems. Vea Menos | |
| SAFIC-CHEM TI | Safic-Alcan | SAFIC-CHEM TI is a mono-functional isocyanate used in moisture-curing one or two components Paints, Adhesives, and Sealants. SAFIC-CHEM TI reacts with water, giving off carbon dioxide and resulting in the formation of reaction products (inert amide) which...Vea Mas SAFIC-CHEM TI is a mono-functional isocyanate used in moisture-curing one or two components Paints, Adhesives, and Sealants. SAFIC-CHEM TI reacts with water, giving off carbon dioxide and resulting in the formation of reaction products (inert amide) which are soluble in conventional solvent-based paints formulations. Approximately 12g of stabilizer is theoretically required for reaction with 1g of water. The suggested use level is between 0.5% and 4.0%, for 0.05% to 0.3% moisture. Experience has shown, however, that the reaction is more effective in the presence of an excess of SAFIC-CHEM TI. Vea Menos | Request Sample |
| Sandorin Yellow 4G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Sandorin Yellow 4G is a brilliant yellow pigment that has good performance in water-based systems. This product has a density of 1.4-1.5 g/cm3 and a pH value of 6.0-8.0, and it is commonly used in industrial paints and decorative paints. | |
| Sarbox SB510E35 | Sartomer Americas | Sarbox SB510E35 es un anhídrido y ácido carboxílico moderadamente funcional que contiene oligómero de metacrilato y monómero de triacrilato de trimetilolpropano etoxilado. Ofrece una excelente velocidad de curado, excelente adherencia a metal y plásticos,...Vea Mas Sarbox SB510E35 es un anhídrido y ácido carboxílico moderadamente funcional que contiene oligómero de metacrilato y monómero de triacrilato de trimetilolpropano etoxilado. Ofrece una excelente velocidad de curado, excelente adherencia a metal y plásticos, y buenas características de humectación y de flujo. Sarbox SB510E35 también ofrece una excelente adherencia de películas delgadas en acero electrorrevestido. Las aplicaciones sugeridas de este producto incluyen adhesivos, plastisoles, tintas de serigrafía, flexografía, huecograbado y revestimientos de papel, plástico, metal y madera. Vea Menos | |
| Sarbox SB520E35 | Sartomer Americas | Sarbox SB520E35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Los sólidos reactivos de este producto se presentan en un 100%. Sarbox SB520E35 ofrece una de las tasas más rápidas d...Vea Mas Sarbox SB520E35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Los sólidos reactivos de este producto se presentan en un 100%. Sarbox SB520E35 ofrece una de las tasas más rápidas de curado de la línea de productos Sarbox, excelente adherencia a metales y plásticos, y buenas características de humectación y de flujo. También ofrece alta resistencia al impacto y flexibilidad, y buena resistencia química, al agua y al calor. Otras aplicaciones sugeridas para este producto incluyen aplicaciones de tintas, revestimientos de madera y papel, y resinas fotosensibles y máscaras de soldadura para electrónica. Vea Menos | |
| Sarbox SB520M35 | Sartomer Americas | Sarbox SB520M35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Sarbox SB520M35 ofrece una de las tasas más rápidas de curado de la línea de productos Sarbox, excelente adherencia a...Vea Mas Sarbox SB520M35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Sarbox SB520M35 ofrece una de las tasas más rápidas de curado de la línea de productos Sarbox, excelente adherencia a metales y plásticos, y buenas características de humectación y de flujo. También ofrece alta resistencia al impacto y flexibilidad, y buena resistencia química, al agua y al calor. Otras aplicaciones sugeridas para este producto incluyen tintas serigráficas, flexográficas y de huecograbado, revestimientos de madera y de papel, y resinas fotosensibles y máscaras de soldadura para electrónica. Vea Menos | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...Vea Mas SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. Vea Menos | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...Vea Mas SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. Vea Menos | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...Vea Mas SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. Vea Menos | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...Vea Mas SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. Vea Menos | |
| Setaprint™ 145 A | Lawter | Setaprint™ 145 A is a phenolic modified rosin ester characterized by a high viscosity and molecular weight with a high tolerance for low KB ink oils. The product's high viscosity allows for greater lithographic performance when modifying less soluble resi...Vea Mas Setaprint™ 145 A is a phenolic modified rosin ester characterized by a high viscosity and molecular weight with a high tolerance for low KB ink oils. The product's high viscosity allows for greater lithographic performance when modifying less soluble resins. It is ideal for use in coatings and offset inks. Vea Menos | |
| Setaprint™ 2120 A | Lawter | Setaprint™ 2120 A is a phenolic modified rosin ester with a high viscosity and displaying good aliphatic solubility. The resin offers high gloss and strong holdout properties, along with a fast solvent release. It also has a good gel behavior towards alum...Vea Mas Setaprint™ 2120 A is a phenolic modified rosin ester with a high viscosity and displaying good aliphatic solubility. The resin offers high gloss and strong holdout properties, along with a fast solvent release. It also has a good gel behavior towards aluminum chelates in the majority of printing ink systems, including offset inks and coatings. Vea Menos | |
| Setaprint™ 2243 A | Lawter | Setaprint™ 2243 A is a phenolic modified rosin ester with a high viscosity, is moderately soluble and which displays a good solvent release. The resin shows good compatibility with drying oils, offering varnishes a hard and scuff-resistant surface. Setapr...Vea Mas Setaprint™ 2243 A is a phenolic modified rosin ester with a high viscosity, is moderately soluble and which displays a good solvent release. The resin shows good compatibility with drying oils, offering varnishes a hard and scuff-resistant surface. Setaprint™ 2243 A is ideally used in offset inks and coatings. Vea Menos | |
| Setaprint™ 2316 A | Lawter | Setaprint™ 2316 A is a phenolic modified rosin ester with medium viscosity and good aliphatic solubility, offering good low shear flow features. It facilitates hard, scuff-resistant surfaces in a large variety of ink systems. Setaprint™ 2316 A is commonly...Vea Mas Setaprint™ 2316 A is a phenolic modified rosin ester with medium viscosity and good aliphatic solubility, offering good low shear flow features. It facilitates hard, scuff-resistant surfaces in a large variety of ink systems. Setaprint™ 2316 A is commonly used in offset inks and coatings. Vea Menos | |
| Setaprint™ 2390 A | Lawter | Setaprint™ 2390 A is a phenolic modified rosin ester designed to offer a higher dilution in low KB ink solvents. It has a medium viscosity to provide ink vehicles with good holdout and setting properties in order to achieve maximum gloss and hardness. The...Vea Mas Setaprint™ 2390 A is a phenolic modified rosin ester designed to offer a higher dilution in low KB ink solvents. It has a medium viscosity to provide ink vehicles with good holdout and setting properties in order to achieve maximum gloss and hardness. The resin offers versatility by combining consistency and high performance in most ink vehicle systems. Setaprint™ 2390 A is ideally used in coatings and offset inks. Vea Menos | |
| Setaprint™ 260 A | Lawter | Setaprint™ 260 A is a phenolic modified rosin ester with more stability and structure that makes it a high performance resin for more demanding ink systems. The product offers improved gloss and high-speed transfer as it maintains a more stable rheology i...Vea Mas Setaprint™ 260 A is a phenolic modified rosin ester with more stability and structure that makes it a high performance resin for more demanding ink systems. The product offers improved gloss and high-speed transfer as it maintains a more stable rheology in various ink vehicles that use the resin. It is considered an exciting addition to the phenolic resins category, marking a new chapter of high performance modified phenolic resins. Setaprint™ 260 A is used in offset inks and coatings. Vea Menos | |
| Setaprint™ 999 A | Lawter | Setaprint™ 999 A is a phenolic modified rosin ester with a low viscosity and high solubility in aliphatic solvents. It offers good pigment wetting properties and facilitates low solution viscosity for high solid vehicles. The product has uses in offset in...Vea Mas Setaprint™ 999 A is a phenolic modified rosin ester with a low viscosity and high solubility in aliphatic solvents. It offers good pigment wetting properties and facilitates low solution viscosity for high solid vehicles. The product has uses in offset inks and coatings. Vea Menos | |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTT es una resina de poliéster siliconado para la producción de revestimientos decorativos. Es un líquido entre transparente y levemente turbio que se utiliza en revestimientos anti-adherentes en combinación con politetrafluoroetileno (PTFE) y...Vea Mas SILIKOFTAL® HTT es una resina de poliéster siliconado para la producción de revestimientos decorativos. Es un líquido entre transparente y levemente turbio que se utiliza en revestimientos anti-adherentes en combinación con politetrafluoroetileno (PTFE) y en revestimientos decorativos para elementos de cocina, electrodomésticos y calefactores eléctricos y a gas con una estabilidad térmica permanente de 250 °C. Algunas características especiales de SILIKOFTAL® HTL 2 incluyen excelente resistencia al detergente para lavaplatos, baja propensión a ponerse amarilla, buena retención del brillo, sin el agregado de compuestos de organoestaño. Vea Menos | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF es una resina de epóxi siliconada para revestimientos de protección resistentes a las altas temperaturas. Es una resina de secado al horno y se distingue por su buena adherencia y resistencia a los solventes. Se puede utilizar en paredes y p...Vea Mas SILIKOPON® EF es una resina de epóxi siliconada para revestimientos de protección resistentes a las altas temperaturas. Es una resina de secado al horno y se distingue por su buena adherencia y resistencia a los solventes. Se puede utilizar en paredes y pisos de concreto y para revestimientos de tejados, cañerías y transporte comercial. Algunas características especiales de SILIKOPON® EF son la retención del brillo, la resistencia a la intemperie, el efecto anti-graffiti, la excelente resistencia a la corrosión y que se puede utilizar en revestimientos con muy alta concentración de sólidos. Vea Menos | Request Sample |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, a...Vea Mas SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, and 2-pack coatings. Vea Menos | Request Sample |
| SmartHide™ | ShayoNano USA, Inc. | SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon z...Vea Mas SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primers, and paper coatings. Vea Menos | |
| Snowtack™ 765A | Lawter | Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfac...Vea Mas Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfaces. It is mechanically stable, has good wash-off behavior and is suitable for use in waterborne adhesives in building and construction and automotive and paper industries. Vea Menos | |
| Snowtack® 775 A | Lawter | Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended ...Vea Mas Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. Vea Menos | |
| Snowtack® 780A | Lawter | Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based d...Vea Mas Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. Vea Menos | |
| Snowtack® 880G | Lawter | Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emul...Vea Mas Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. Vea Menos | |
| Snowtack™ SE724G | Lawter | Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...Vea Mas Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. Vea Menos | |
| Snowtack™ SE780G | Lawter | Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...Vea Mas Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. Vea Menos | |
| Solvar™ A | Lawter | Solvar™ A is a drying, oil-modified polyester that functions as a low viscosity ink vehicle. It can be used as a diluent to increase flow and reduce tack while improving dry rub resistance. The product has good pigment wetting ability, a high molecular we...Vea Mas Solvar™ A is a drying, oil-modified polyester that functions as a low viscosity ink vehicle. It can be used as a diluent to increase flow and reduce tack while improving dry rub resistance. The product has good pigment wetting ability, a high molecular weight for viscosity and is ideally suited for use in heatset, letterpress and sheet-fed inks. Vea Menos | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...Vea Mas SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. Vea Menos | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...Vea Mas SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. Vea Menos | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...Vea Mas SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. Vea Menos | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...Vea Mas SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. Vea Menos | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...Vea Mas SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. Vea Menos | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...Vea Mas SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. Vea Menos | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...Vea Mas STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. Vea Menos | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...Vea Mas STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. Vea Menos | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...Vea Mas STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. Vea Menos | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...Vea Mas STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. Vea Menos | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...Vea Mas STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. Vea Menos | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...Vea Mas STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. Vea Menos | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...Vea Mas STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. Vea Menos | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...Vea Mas STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. Vea Menos | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...Vea Mas STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. Vea Menos | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...Vea Mas STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. Vea Menos | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...Vea Mas STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. Vea Menos | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...Vea Mas STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. Vea Menos | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...Vea Mas STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. Vea Menos | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...Vea Mas STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. Vea Menos | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...Vea Mas STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. Vea Menos | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...Vea Mas STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) Vea Menos | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...Vea Mas STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. Vea Menos | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...Vea Mas STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. Vea Menos | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...Vea Mas STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. Vea Menos | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...Vea Mas STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) Vea Menos | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...Vea Mas STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. Vea Menos | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...Vea Mas STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. Vea Menos | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...Vea Mas STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. Vea Menos | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...Vea Mas STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. Vea Menos | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...Vea Mas STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. Vea Menos | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...Vea Mas STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. Vea Menos |
