| CYMEL® 385 | Allnex | La resina CYMEL® 385 es una resina de melamina metilada, de alta funcionalidad de iminas, con bajo grado de alquilación. Se suministra en agua y se recomienda como agente de reticulación para polímeros de emulsión con hidroxilo y otros sistemas acuosos q...Vea Mas La resina CYMEL® 385 es una resina de melamina metilada, de alta funcionalidad de iminas, con bajo grado de alquilación. Se suministra en agua y se recomienda como agente de reticulación para polímeros de emulsión con hidroxilo y otros sistemas acuosos que contienen hidroxilo y funcionalidad de amidas. Tiene una alta tendencia a la autocondensación y puede utilizarse para aumentar las propiedades de dureza y resistencia de polímeros termoplásticos a base de agua. Vea Menos | Request Sample |
| CYMEL® 5010 | Allnex | La resina CYMEL® 5010 es una resina de benzoguanamina parcialmente n-butilada suministrada en una mezcla de n-butanol y xileno y está diseñada para revestimientos a base de solventes. Al igual que otras resinas de benzoguanamina, este producto proporcion...Vea Mas La resina CYMEL® 5010 es una resina de benzoguanamina parcialmente n-butilada suministrada en una mezcla de n-butanol y xileno y está diseñada para revestimientos a base de solventes. Al igual que otras resinas de benzoguanamina, este producto proporciona excelente adhesión y resistencia química al revestimiento, aunque no requiere un catalizador externo en la formulación. Vea Menos | Request Sample |
| CYMEL® 5010B | Allnex | CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but wit...Vea Mas CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL 5010B is not suitable for exterior applications. Vea Menos | Request Sample |
| CYMEL® 659 | Allnex | La resina CYMEL® 659 es una resina de benzoguanamina parcialmente n-butilada suministrada en n-butanol. Al igual que otras resinas de benzoguanamina, este producto proporciona excelente adhesión y resistencia química al revestimiento, aunque no requiere u...Vea Mas La resina CYMEL® 659 es una resina de benzoguanamina parcialmente n-butilada suministrada en n-butanol. Al igual que otras resinas de benzoguanamina, este producto proporciona excelente adhesión y resistencia química al revestimiento, aunque no requiere un catalizador externo en la formulación. Debido a las limitadas propiedades de resistencia de las resinas de benzoguanamina, CYMEL® 659 no es adecuada para aplicaciones en el exterior. Vea Menos | Request Sample |
| CYMEL® MB-94 Resin | Allnex | CYMEL® MB-94 resin is an n-butylated melamine crosslinker with a high degree of alkylation and very low free formaldehyde. CYMEL® MB-94 resin is designed for use in combination with urea resins for acid curing wood finishes to improve chemical resistance ...Vea Mas CYMEL® MB-94 resin is an n-butylated melamine crosslinker with a high degree of alkylation and very low free formaldehyde. CYMEL® MB-94 resin is designed for use in combination with urea resins for acid curing wood finishes to improve chemical resistance and cold check properties while maintaining fast drying properties. Vea Menos | Request Sample |
| CYMEL® MI-12-I | Allnex | La resina CYMEL® MI-12-I es una melamina parcialmente iso-butilada suministrada en iso-butanol. Su alta reactividad, combinada con muy buenas propiedades de nivelación, hace que este producto sea adecuado para aplicaciones industriales de secado rápido, c...Vea Mas La resina CYMEL® MI-12-I es una melamina parcialmente iso-butilada suministrada en iso-butanol. Su alta reactividad, combinada con muy buenas propiedades de nivelación, hace que este producto sea adecuado para aplicaciones industriales de secado rápido, como recubrimientos posteriores de espejos, imprimadores y esmaltes de inmersión. Vea Menos | Request Sample |
| CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films th...Vea Mas CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. Vea Menos | Request Sample |
| CYMEL® NF 3030 | Allnex | CYMEL® NF-3030 resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA am...Vea Mas CYMEL® NF-3030 resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA amine-free acrylic emulsion. Resulting formulas exhibit superior catalyzed pot life relative to isocyanate-based conversion varnishes. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility. Vea Menos | Request Sample |
| CYMEL® NF 3041 | Allnex | La resina CYMEL® NF-3041 es un agente reticulante sin formaldehido, parcialmente -butilado, suministrado en n-butanol. Fue diseñado especialmente para usar en barnices de conversión de dos componentes a base de solventes, de curado a temperatura ambiente,...Vea Mas La resina CYMEL® NF-3041 es un agente reticulante sin formaldehido, parcialmente -butilado, suministrado en n-butanol. Fue diseñado especialmente para usar en barnices de conversión de dos componentes a base de solventes, de curado a temperatura ambiente, para madera a nivel industrial. Los sistemas que contienen este producto, exhiben una vida útil superior en el pote en relación a barnices de conversión a base de urea y requieren significativamente menor cantidad de catalizador para llevar a cabo el curado. Los revestimientos resultantes tienen excelentes propiedades de aspecto, dureza y resistencia y flexibilidad en frío y calor. Vea Menos | Request Sample |
| CYMEL® U-1050-10 Resin | Allnex | La resina CYMEL® U-1050-10 es una resina de urea parcialmente butilada y es la versión sin solventes de la resina CYMEL U-1050. Este producto tiene amplia compatibilidad con otros formadores de película y es útil en acabados de horneado industriales de cu...Vea Mas La resina CYMEL® U-1050-10 es una resina de urea parcialmente butilada y es la versión sin solventes de la resina CYMEL U-1050. Este producto tiene amplia compatibilidad con otros formadores de película y es útil en acabados de horneado industriales de curado rápido y en barnices de conversión con curado a baja temperatura. Vea Menos | Request Sample |
| CYMEL® U-1051 | Allnex | La resina CYMEL® U-1051 es una resina de urea parcialmente iso-butilada suministrada en una mezcla de n-butanol y xileno. Este producto tiene amplia compatibilidad con otros formadores de película y es útil en acabados de horneado industriales de curado r...Vea Mas La resina CYMEL® U-1051 es una resina de urea parcialmente iso-butilada suministrada en una mezcla de n-butanol y xileno. Este producto tiene amplia compatibilidad con otros formadores de película y es útil en acabados de horneado industriales de curado rápido y en barnices de conversión con curado a baja temperatura. Vea Menos | Request Sample |
| CYMEL® U-1052-8 | Allnex | La resina CYMEL® U-1052-8 es un agente reticulador de urea y formaldehido n-butilado suministrado en una mezcla de n-butanol y sileno. Tiene una excelente compatibilidad con resinas epoxi y es particularmente adecuado para revestimientos interiores de lat...Vea Mas La resina CYMEL® U-1052-8 es un agente reticulador de urea y formaldehido n-butilado suministrado en una mezcla de n-butanol y sileno. Tiene una excelente compatibilidad con resinas epoxi y es particularmente adecuado para revestimientos interiores de latas, donde contribuye a la buena adhesión y a la resistencia a la pasteurización. Vea Menos | Request Sample |
| CYMEL® U-1054 | Allnex | La resina CYMEL® U-1054 es un agente reticulador de urea parcialmente n-butilado suministrado en una mezcla de n-butanol y etanol. Es adecuado para formulaciones industriales de imprimadores de curado por calor debido a sus excelentes propiedades de adhes...Vea Mas La resina CYMEL® U-1054 es un agente reticulador de urea parcialmente n-butilado suministrado en una mezcla de n-butanol y etanol. Es adecuado para formulaciones industriales de imprimadores de curado por calor debido a sus excelentes propiedades de adhesión y resistencia al agua y a la corrosión. En formulaciones de revestimientos de latas, este producto proporciona un excelente equilibrio entre adhesión y flexibilidad de capas, especialmente después de varios ciclos de curado. Vea Menos | Request Sample |
| CYMEL® U-216-10LF | Allnex | La resina CYMEL® U-216-10LF es una resina de urea n-butilada que tiene una excelente compatibilidad con resinas hidrófobas. Es la versión de CYMEL® 216-8 sin solventes con el beneficio adicional de menor formaldehido libre. Está diseñada para revestimient...Vea Mas La resina CYMEL® U-216-10LF es una resina de urea n-butilada que tiene una excelente compatibilidad con resinas hidrófobas. Es la versión de CYMEL® 216-8 sin solventes con el beneficio adicional de menor formaldehido libre. Está diseñada para revestimientos decorativos metálicos, revestimientos de latas e imprimadores de revestimiento de bobinas. Este producto también puede agregarse como agente de nivelación en sistemas de resinas epoxi de aminas catalizadas de curado en frío. Vea Menos | Request Sample |
| CYMEL® U-216-8 | Allnex | La resina CYMEL® U-216-8 es un agente reticulante parcialmente n-butilado suministrado en una mezcla de n-butanol y xileno. Presenta una excelente compatibilidad con la mayoría de las resinas hidrófobas, como las resinas epoxi, y puede contribuir para mej...Vea Mas La resina CYMEL® U-216-8 es un agente reticulante parcialmente n-butilado suministrado en una mezcla de n-butanol y xileno. Presenta una excelente compatibilidad con la mayoría de las resinas hidrófobas, como las resinas epoxi, y puede contribuir para mejorar las características de nivelación y adhesión. Este producto se recomienda como un reticulante de revestimientos imprimadores, revestimientos de latas y acabados decorativos. Vea Menos | Request Sample |
| CYMEL® U-227-8 | Allnex | CYMEL® U-227-8 es un agente reticulante de urea parcialmante n-butilado con un grado medio de alquidación, contenido medio de metinol, baja funcionalidad de imino, peso molecular de medio a bajo y viscosidad media. Se recomienda para usar en imprimadores ...Vea Mas CYMEL® U-227-8 es un agente reticulante de urea parcialmante n-butilado con un grado medio de alquidación, contenido medio de metinol, baja funcionalidad de imino, peso molecular de medio a bajo y viscosidad media. Se recomienda para usar en imprimadores epoxi o metálicos de urea, revestimientos decorativos de metal y barnices de inmersión y cilindros. Vea Menos | Request Sample |
| CYMEL® U-65 | Allnex | La resina CYMEL® U-65 es una resina de urea metilada, con alto contenido de sólidos, diseñada para usar en sistemas solubles en solventes orgánicos y en agua como agente reticulante para una variedad de polímeros que contienen hidroxil. | Request Sample |
| CYMEL® U-662 | Allnex | CYMEL® U-662 es un agente reticulante de urea-formaldehido parcialmente isobutilado con un grado medio de alquidación, contenido medio de metinol, baja funcionalidad de imino, medio peso molecular y viscosidad media a alta. Es muy adecuado para aplicacion...Vea Mas CYMEL® U-662 es un agente reticulante de urea-formaldehido parcialmente isobutilado con un grado medio de alquidación, contenido medio de metinol, baja funcionalidad de imino, medio peso molecular y viscosidad media a alta. Es muy adecuado para aplicaciones de revestimientos de madera de curado con ácido, donde se requiere baja emisión de formaldehido. Vea Menos | Request Sample |
| CYMEL® U-663 | Allnex | CYMEL® U-663 es un agente reticulante urea-aldehído parcialmente isobutilado con un grado medio de alquilación, contenido medio de metilol, una funcionalidad imino bastante baja, peso molecular medio, grado medio de reactividad y una viscosidad entre medi...Vea Mas CYMEL® U-663 es un agente reticulante urea-aldehído parcialmente isobutilado con un grado medio de alquilación, contenido medio de metilol, una funcionalidad imino bastante baja, peso molecular medio, grado medio de reactividad y una viscosidad entre media y alta. Es muy útil para las aplicaciones de revestimiento sobre madera con cura de ácidos, donde se requieren baja emisión de formaldehídos y alto brillo de la película. Vea Menos | Request Sample |
| CYMEL® U-80 | Allnex | CYMEL® U-80 es una resina de urea-formaldehído altamente butilada con una excelente compatibilidad con la mayoría de los formadores de película. Es soluble en la mayoría de los solventes y tiene una excelente compatibilidad con hidrocarburos alifáticos. E...Vea Mas CYMEL® U-80 es una resina de urea-formaldehído altamente butilada con una excelente compatibilidad con la mayoría de los formadores de película. Es soluble en la mayoría de los solventes y tiene una excelente compatibilidad con hidrocarburos alifáticos. Este producto es adecuado para una amplia gama de aplicaciones de revestimiento de alto contenido de sólidos, incluidos imprimadores para revestimientos de automóviles, industriales en general y revestimientos de envases, proporcionando mejor flexibilidad de la película y adhesión en varios sustratos. Vea Menos | Request Sample |
| CYMEL® UB-30-B | Allnex | La resina CYMEL® UB-30-B es un agente de reticulación de urea parcialmente n-butilado suministrado en n-butanol. El rápido desarrollo de la dureza de la película combinado con excelentes propiedades de adherencia lo convierten en un producto adecuado para...Vea Mas La resina CYMEL® UB-30-B es un agente de reticulación de urea parcialmente n-butilado suministrado en n-butanol. El rápido desarrollo de la dureza de la película combinado con excelentes propiedades de adherencia lo convierten en un producto adecuado para una amplia gama de aplicaciones de horneado industriales. Debido a las limitadas propiedades de resistencia a los rayos UV de las resinas de urea, este producto no es adecuado para aplicaciones en el exterior. Vea Menos | Request Sample |
| CYMEL® UI-19-I | Allnex | La resina CYMEL® UI-19-I es una resina de urea parcialmente iso-butilada suministrada en iso-butanol. Las propiedades de secado rápido ofrecen una buena resistencia al bloqueo y hacen que este producto sea adecuado para acabados industriales de madera de ...Vea Mas La resina CYMEL® UI-19-I es una resina de urea parcialmente iso-butilada suministrada en iso-butanol. Las propiedades de secado rápido ofrecen una buena resistencia al bloqueo y hacen que este producto sea adecuado para acabados industriales de madera de horneado a temperaturas bajas y a temperatura ambiente. Vea Menos | Request Sample |
| CYMEL® UI-19-IE | Allnex | CYMEL UI-19-IE resin is a partially iso-butylated urea crosslinker supplied in isobutanol and ethanol. The very fast drying properties combined with very good stackability properties makes CYMEL UI-19-IE resin suitable for fast drying acid curing wood coa...Vea Mas CYMEL UI-19-IE resin is a partially iso-butylated urea crosslinker supplied in isobutanol and ethanol. The very fast drying properties combined with very good stackability properties makes CYMEL UI-19-IE resin suitable for fast drying acid curing wood coating applications where low odor formulations are required. Vea Menos | Request Sample |
| CYMEL® UI-21-E Resin | Allnex | La resina CYMEL® UI-21-E es una resina de urea parcialmente iso-butilada suministrada en etanol. Ha sido diseñada para una amplia gama de acabados industriales de madera alto espesor y poco olor. | Request Sample |
| CYMEL® UI-27-EI | Allnex | La resina CYMEL® UI-27-EI es una resina de urea parcialmente iso-butilada suministrada en una mezcla de etanol e iso-butanol. Es adecuada para usar tanto en aplicaciones de revestimiento de madera de curado con ácido como en formulaciones industriales de ...Vea Mas La resina CYMEL® UI-27-EI es una resina de urea parcialmente iso-butilada suministrada en una mezcla de etanol e iso-butanol. Es adecuada para usar tanto en aplicaciones de revestimiento de madera de curado con ácido como en formulaciones industriales de imprimación en general y capas de protección. Este producto no es adecuado para aplicaciones en el exterior. Vea Menos | Request Sample |
| CYMEL® UI-38-I Resin | Allnex | La resina CYMEL® UI-38-I es un agente de reticulación de urea parcialmente iso-butilado suministrado en iso-butanol y destinado para su uso en aplicaciones de secado industrial y especialmente en sistemas aplicados por pulverización electrostática. Debido...Vea Mas La resina CYMEL® UI-38-I es un agente de reticulación de urea parcialmente iso-butilado suministrado en iso-butanol y destinado para su uso en aplicaciones de secado industrial y especialmente en sistemas aplicados por pulverización electrostática. Debido a la pobre resistencia a la intemperie de las resinas de urea, este producto no se recomienda para aplicaciones en el exterior. Vea Menos | Request Sample |
| CYMEL® XW 3106 | Allnex | La resina CYMEL® XW 3106 es un agente de reticulación de melamina de alto contenido en sólidos, especialmente diseñado para formulaciones de dos componentes a base de solventes a temperaturas de horneado bajas y ambiente. El potencial de curado a baja tem...Vea Mas La resina CYMEL® XW 3106 es un agente de reticulación de melamina de alto contenido en sólidos, especialmente diseñado para formulaciones de dos componentes a base de solventes a temperaturas de horneado bajas y ambiente. El potencial de curado a baja temperatura para este agente de reticulación proporciona la oportunidad de formular revestimientos de alto rendimiento para sustratos sensibles al calor. Estos sistemas tienen unas excelentes propiedades de dureza temprana, resistencia, aspecto y flexibilidad en ciclos de frío-calor. Vea Menos | Request Sample |
| CYREZ® 400 | Allnex | CYREZ® 400 is a HMMM-based resin using precipitated silica as a carrier. This resin is 72% active ingredient HMMM and functions as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinfo...Vea Mas CYREZ® 400 is a HMMM-based resin using precipitated silica as a carrier. This resin is 72% active ingredient HMMM and functions as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. Vea Menos | Request Sample |
| CYREZ® 963 Product Family (100% HMMM) | Allnex | CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ...Vea Mas CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ 963 products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. Vea Menos | Request Sample |
| CYREZ® 966 RESIN | Allnex | CYREZ® 966 resin is a highly methylated melamine crosslinking agent and is the purest form of hexamethoxymethylmelamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYREZ® 966 resin an excellent ...Vea Mas CYREZ® 966 resin is a highly methylated melamine crosslinking agent and is the purest form of hexamethoxymethylmelamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYREZ® 966 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings. Vea Menos | Request Sample |
| CYREZ® CRA 200-300 Product Family (72% HMMM) | Allnex | CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to ...Vea Mas CYREZ® 200-300 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 72% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. These products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. Vea Menos | Request Sample |
| DAOTAN® STW 6434/40WA | Allnex | DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for...Vea Mas DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for waterborne OEM primer-surfacers to improve stone chipping resistance. Vea Menos | Request Sample |
| DAOTAN® TW 1225/40WANEP | Allnex | Daotan® TW 1225/40WANEP is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has shear stability and pigment compatibility, giving highly flexible films. | Request Sample |
| DAOTAN® TW 1252/42WA | Allnex | DAOTAN® TW 1252/42WA es una dispersión de poliuretano modificado con ácidos grasos de secado. Se caracteriza por un secado muy rápido y capas decorativas superiores de mucho brillo. Exhibe buena resistencia al agua y a la intemperie, y no contiene aminas ...Vea Mas DAOTAN® TW 1252/42WA es una dispersión de poliuretano modificado con ácidos grasos de secado. Se caracteriza por un secado muy rápido y capas decorativas superiores de mucho brillo. Exhibe buena resistencia al agua y a la intemperie, y no contiene aminas orgánicas. DAOTAN® TW 1252/42WA está diseñado como único aglutinante para la formulación especialmente de revestimientos industriales de secado rápido. El curado rápido permite su utilización en métodos de pulverización. Vea Menos | Request Sample |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly ...Vea Mas Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. Vea Menos | Request Sample |
| DAOTAN® TW 6431/45WA | Allnex | Físicamente secado, libre de solvente y surfactante, poliuretano-urea-dispersión alifática acuosa a base de poli-butadieno. Produce secado rápido y ofrece películas claras y libres de grietas y altamente flexibles. | Request Sample |
| DAOTAN® TW 6439/30WA | Allnex | Daotan® TW 6439/30WA se recomienda como alternativa a Daotan (V)TW 1237 sin NMP/NEP. Al igual que Daotan TW 6439, es una dispersión de poliuretano de alto peso molecular a base de poliéster. Cuando se seca a temperatura ambiente, este producto ofrece pelí...Vea Mas Daotan® TW 6439/30WA se recomienda como alternativa a Daotan (V)TW 1237 sin NMP/NEP. Al igual que Daotan TW 6439, es una dispersión de poliuretano de alto peso molecular a base de poliéster. Cuando se seca a temperatura ambiente, este producto ofrece películas transparentes, sin grietas sin la adición extra de disolventes orgánicos. Estas películas también presentan elasticidad y excelentes propiedades mecánicas. Vea Menos | Request Sample |
| DAOTAN® TW 6442/42WA | Allnex | DAOTAN® TW 6442/42WA is a Polyurethane dispersion modified with drying fatty acids. | Request Sample |
| DAOTAN® TW 6450/30WA | Allnex | DAOTAN® TW 6450/30WA es una dispersión acuosa de poliuretano alifático a base de policarbonato. Se recomienda como alternativa de Daotan™ (V)TW 1236 sin NMP/NEP. Cuando se seca a temperatura ambiente, este producto ofrece películas transparentes, sin grie...Vea Mas DAOTAN® TW 6450/30WA es una dispersión acuosa de poliuretano alifático a base de policarbonato. Se recomienda como alternativa de Daotan™ (V)TW 1236 sin NMP/NEP. Cuando se seca a temperatura ambiente, este producto ofrece películas transparentes, sin grietas sin la adición extra de disolventes orgánicos. Estas películas también presentan elasticidad y excelentes propiedades mecánicas, así como muy buena adhesión a diferentes sustratos plásticos Vea Menos | Request Sample |
| DAOTAN® TW 6452/30WA | Allnex | DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water r...Vea Mas DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water resistance as well as mechanical properties. Vea Menos | Request Sample |
| DAOTAN® TW 6464/36WA | Allnex | Daotan® TW 6464/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance. | Request Sample |
| DAOTAN® TW 6466/36WA | Allnex | DAOTAN® TW 6466/36WA es una emulsión acuosa de un híbrido de acrílico-uretano alifático, disolvente y libre de emulsionantes. Es una dispersión de poliuretano a base de poliéster, modificada con acrílico y de alto peso molecular. La resina brinda estabili...Vea Mas DAOTAN® TW 6466/36WA es una emulsión acuosa de un híbrido de acrílico-uretano alifático, disolvente y libre de emulsionantes. Es una dispersión de poliuretano a base de poliéster, modificada con acrílico y de alto peso molecular. La resina brinda estabilidad al corte y no contiene disolventes y emulsionantes. Secada a temperatura ambiente, DAOTAN® TW 6466 genera películas transparentes libres de grietas sin la adición previa de disolventes o aditivos de pintura. Vea Menos | Request Sample |
| DAOTAN® TW 6473/37WA | Allnex | Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provide...Vea Mas Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provides good shear stability and pigment compatibility. Vea Menos | Request Sample |
| DAOTAN® TW 6474/37WA | Allnex | Daotan® TW 6474/37WA es una dispersión acuosa de un híbrido de acrílico-poliuretano alifático. Es una dispersión de poliuretano de alto grado, particularmente apta para combinar con emulsiones alquídicas y acrílicas, lo que mejora considerablemente el tie...Vea Mas Daotan® TW 6474/37WA es una dispersión acuosa de un híbrido de acrílico-poliuretano alifático. Es una dispersión de poliuretano de alto grado, particularmente apta para combinar con emulsiones alquídicas y acrílicas, lo que mejora considerablemente el tiempo de secado y el desarrollo de la rigidez prematura. También puede utilizarse para mejorar la flexibilidad de los revestimientos de acrílico en dispersión. Vea Menos | Request Sample |
| DAOTAN® TW 6490/35WA | Allnex | Es una dispersión alifática de poliuretano transmitida por agua y sin solvente. | Request Sample |
| DAOTAN® TW 6491/33WA | Allnex | Daotan® TW 6491/33WA es una dispersión de poliuretano base de poliéster, de alto peso molecular, a base de agua, sin solventes ni emulsionantes. Los revestimientos a base de Daotan TW 6491 proporcionan un secado rápido y producen películas transparentes,...Vea Mas Daotan® TW 6491/33WA es una dispersión de poliuretano base de poliéster, de alto peso molecular, a base de agua, sin solventes ni emulsionantes. Los revestimientos a base de Daotan TW 6491 proporcionan un secado rápido y producen películas transparentes, sin grietas, sin la adición extra de otros solventes. Otras características sobresalientes son la alta elasticidad y la elongación. Vea Menos | Request Sample |
| DAOTAN® TW 6493/35WA | Allnex | Daotan® TW 6493/35WA es una dispersión de poliuretano alifático, a base de agua, sin solventes ni emulsionantes. Cuando se seca a temperatura elevada proporciona películas transparentes, sin grietas, en tanto que para el secado a temperatura ambiente se r...Vea Mas Daotan® TW 6493/35WA es una dispersión de poliuretano alifático, a base de agua, sin solventes ni emulsionantes. Cuando se seca a temperatura elevada proporciona películas transparentes, sin grietas, en tanto que para el secado a temperatura ambiente se requieren solventes adicionales. Vea Menos | Request Sample |
| DAOTAN® TW 6495/35WA | Allnex | DAOTAN® TW 6495/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films. It is recommended for waterborne plastic primers and basecoats. | Request Sample |
| DAOTAN® TW 7000/40WA | Allnex | Daotan® TW 7000/40WA es una dispersión de poliuretano de baja viscosidad, sin solventes orgánicos ni emulsionantes. Se recomienda especialmente para revestimientos plásticos (imprimación, capas base, monocapas) para el interior y el exterior de automóvile...Vea Mas Daotan® TW 7000/40WA es una dispersión de poliuretano de baja viscosidad, sin solventes orgánicos ni emulsionantes. Se recomienda especialmente para revestimientos plásticos (imprimación, capas base, monocapas) para el interior y el exterior de automóviles, vehículos utilitarios, revestimientos de láminas y para la industria en general (por ejemplo, artículos para el hogar). Vea Menos | Request Sample |
| DAOTAN® TW 7010/36WA | Allnex | DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for f...Vea Mas DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). Highest water and chemical resistance, high Tg, Vea Menos | Request Sample |
| DAOTAN® TW 7050/34WA | Allnex | DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous ad...Vea Mas DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous addition of solvents or paint additives. Vea Menos | Request Sample |
| DAOTAN® TW 7061/35WA | Allnex | DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free ...Vea Mas DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free films without any previous addition of solvents or paint additives. Vea Menos | Request Sample |
| DAOTAN® TW 7063/36WA | Allnex | DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free ...Vea Mas DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free films without any previous additions of solvents or paint additives. Vea Menos | Request Sample |
| DAOTAN® TW 7064/36WA | Allnex | DAOTAN® TW 7064/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance. | Request Sample |
| DAOTAN® TW 7065/36WA | Allnex | DAOTAN® TW 7065/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical and abrasion resistance. | Request Sample |
| DAOTAN® TW 7066/36WA | Allnex | DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free...Vea Mas DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free films without any previous addition of solvents or paint additives. Vea Menos | Request Sample |
| DAOTAN® VTW 1225/40WA | Allnex | Dispersión acuosa, alifática de poliuretano que contiene a grupos hidroxi. Sistemas de revestimiento altamente flexibles, especialmente para revestimientos base y revestimientos superiores decorativos para plásticos. | Request Sample |
| DAOTAN® VTW 1250/40WA | Allnex | Dispersión aromática de poliuretano, modificada con ácidos grasos en secado. | Request Sample |
| DAOTAN® VTW 1262/35WA | Allnex | Una emulsión de poliuretano que no necesita mas formadores de película para dar películas flexibles claras, cuando es secada en temperatura ambiente. | Request Sample |
| DAOTAN® VTW 1265/36WA | Allnex | Dispersión de poliuretano auto-reticulante, acuosa y sin solvente. | Request Sample |
| DAOTAN® VTW 1686/40WA | Allnex | Dispersión de acrílico, poliéster-modificada, que contiene grupos de epoxi usados como el único aglutinante, o en combinación con resinas de melamina y/o dispersiones de poliuretano, para la producción de pinturas industriales diluibles en agua, como ser ...Vea Mas Dispersión de acrílico, poliéster-modificada, que contiene grupos de epoxi usados como el único aglutinante, o en combinación con resinas de melamina y/o dispersiones de poliuretano, para la producción de pinturas industriales diluibles en agua, como ser revestimientos base. Vea Menos | Request Sample |
| DAOTAN® VTW 2229/40WANMP | Allnex | Es una dispersión aromática acuosa de poliuretano que contiene grupos hidroxi. | Request Sample |
| DAOTAN® VTW 6421/42WA | Allnex | Daotan® VTW 6421/42WA es una solución transparente de resina de poliuretano a base de agua, y tiene excelentes propiedades de adherencia y flexibilidad. Se puede utilizar como aglutinante adicional en formulaciones de revestimientos de 1 y 2 componentes y...Vea Mas Daotan® VTW 6421/42WA es una solución transparente de resina de poliuretano a base de agua, y tiene excelentes propiedades de adherencia y flexibilidad. Se puede utilizar como aglutinante adicional en formulaciones de revestimientos de 1 y 2 componentes y en adhesivos. Vea Menos | Request Sample |
| DAOTAN® VTW 6460/35WA | Allnex | Dispersión acuosa de poliuretano, sin solvente | Request Sample |
| DAOTAN® VTW 6462/36WA | Allnex | Dispersión acuosa de un uretano alifático-acril-híbrido, auto reticulante, libre de solvente y emulsionantes. | Request Sample |
| DAOTAN® VTW 6463/36WA | Allnex | Daotan® VTW 6463/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It has very good wetting properties, and quick curing to give clear crack-free films. | Request Sample |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...Vea Mas Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. Vea Menos | |
| Deco-Coat DC-2510 | Epoxies, Etc. | Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...Vea Mas Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. Vea Menos | |
| Deco-Coat DC-2550 | Epoxies, Etc. | Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this prod...Vea Mas Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this product is ideal for use in applications such as labels, plaques, emblems, badges, key & luggage tags, and wood trim kits. Vea Menos | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...Vea Mas Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. Vea Menos | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...Vea Mas Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. Vea Menos | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...Vea Mas DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Vea Menos | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...Vea Mas DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Vea Menos | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...Vea Mas DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Vea Menos | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...Vea Mas DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Vea Menos | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...Vea Mas DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Vea Menos | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...Vea Mas DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. Vea Menos | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...Vea Mas DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. Vea Menos | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...Vea Mas DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. Vea Menos | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...Vea Mas DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. Vea Menos | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...Vea Mas DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). Vea Menos | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...Vea Mas DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. Vea Menos | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...Vea Mas DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Vea Menos | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...Vea Mas DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Vea Menos | Request Sample |
| D.E.H.™ 20 | Univar Solutions | D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in ...Vea Mas D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. Vea Menos | |
| D.E.H.™ 24 | Univar Solutions | D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling poi...Vea Mas D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling point, and is used for maintenance paints, the manufacture of epoxyamine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. Vea Menos | |
| D.E.H.™ 29 | Univar Solutions | D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other appl...Vea Mas D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other applications where color is not a limitation. In adhesives, it yields much higher peel strength than DETA or TETA at comparable gel times and lower cost. Vea Menos | |
| D.E.H.™ 39 | Univar Solutions | D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil...Vea Mas D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, it is used for casting, potting and encapsulation. It is often used for epoxy composite materials. Vea Menos | |
| D.E.H.™ 4909 | Univar Solutions | D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications...Vea Mas D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications, and concrete primers. Manufactured without benzyl alcohol and nonylphenol. Vea Menos | |
| D.E.H.™ 52 | Univar Solutions | D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and m...Vea Mas D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, however it is much less hygroscopic than standard polyamines. Applications include maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates and particularly suitable for colorless systems. Vea Menos | |
| D.E.H.™ 530E32 | Univar Solutions | D.E.H.™ 530E32 is a cycloaliphatic amine cure agent for epoxy resin systems with low color, blush-free, especially designed for ambient and low temperature cure applications. | |
| D.E.H.™ 545 | Univar Solutions | D.E.H.™ 545 is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R™ 353 ...Vea Mas D.E.H.™ 545 is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R™ 353 and D.E.R 324 are recommended epoxy resins for use with D.E.H 545 as a starting formulation of primer systems. Vea Menos | |
| D.E.H.™ 546 | Univar Solutions | D.E.H.™ 546 is a low viscosity modified cycloaliphatic amine intended for ambient curing of liquid epoxy resins, providing good corrosion protection. Applications include industrial flooring, primers and sealers. | |
| D.E.H.™ 554 | Univar Solutions | D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low visc...Vea Mas D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low viscosity. Typical applications include self leveling flooring, concrete sealers and high solid coatings. Vea Menos | |
| D.E.H.™ 561 | Univar Solutions | D.E.H.™ 561 is a low viscosity, formulated, modified cycloaliphatic amine with low color and fast cure at low temperatures, is specially designed for use in high solids coatings, self leveling and screed floors. | |
| D.E.H.™ 570 | Univar Solutions | D.E.H.™ 570 is a low viscosity modified cycloaliphatic amine hardener. DEH 570 imparts high strength and excellent chemical resistance. | |
| D.E.H.™ 58 | Univar Solutions | D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatin...Vea Mas D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatings or adhesive systems. Vea Menos | |
| D.E.H.™ 582 | Univar Solutions | D.E.H.™ 582 is a cycloaliphatic amine hardener used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. | |
| D.E.H.™ 590 | Univar Solutions | D.E.H.™ 590 is a curing agent specifically designed for high chemical resistance. | |
| D.E.H.™ 598B | Univar Solutions | D.E.H.™ 598B is a modified aliphatic amine hardener used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. |
