BYK has an established history of innovation such as being the first additive manufacturer to begin using Controlled Polymerization Technology (CPT), launching the first rheology-modified wax emulsion, and being one of the first companies to use nanotechnology for improving Coatings properties. BYK invests approximately 7.5% of its earnings in R&D—three times more than the industry average.
Aditivos humectantes y dispersantes, de molecularidad elevada, para sistemas transmitidos por solvente. Solución de una sal ácida policarboxílica de amidas de poliamina.
Aditivos humectantes y dispersantes, de molecularidad elevada, para sistemas transmitidos por solvente. Solución de una sal ácida policarboxílica de amidas de poliamina.
ANTI-TERRA®-210 is a wetting and dispersing additive to prevent fumed silica settling in laminating resins based on unsaturated polymers. It contains multiple active groups which attach to fumed silica particles and stabilize the existing network. This co...Vea Mas
ANTI-TERRA®-210 is a wetting and dispersing additive to prevent fumed silica settling in laminating resins based on unsaturated polymers. It contains multiple active groups which attach to fumed silica particles and stabilize the existing network. This controlled flocculation effect prevents the fumed silica particles settling in the resin. The side effects are increased thixotropy and improved sag resistance. The typical “stir-before-use” procedure is no longer necessary. The additive guarantees safe handling and improved storage stability of the laminating resin. ANTI-TERRA®-210 has no impact on curing properties. Vea Menos
Aditivo humectante y de dispersión para sistemas transmitidos por solvente y sin solvente. Solución de una sal de poliaminamidas no-saturadas y poliésteres ácidos de bajo peso molecular.
Aditivo humectante y de dispersión para sistemas transmitidos por solvente y sin solvente. Solución de una sal de poliaminamidas no-saturadas y poliésteres ácidos de bajo peso molecular.
AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes.
AQUACER 1031 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous care products. It offers an anti-slip effect and good foot traffic resistance.
AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds.
Cera de emulsión para mejorar las propiedades de superficie de los revestimientos de lata transmitidos por agua. Emulsión aniónica de una cera de polietileno oxidado de dispersion alta.
AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the s...Vea Mas
AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. Vea Menos
AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip.
AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...Vea Mas
AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 506 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 506 is compatible with all known polymer dispersions and plasticizers. Vea Menos
Ceras de emulsión para mejorar las propiedades de superficie de los sistemas de pintura transmitidos por agua. Emulsión aniónica de una cera oxidada de polietileno de HD (Dispersión Alta).
Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de las tintas de impresión acuosos. Emulsión no-iónica basada en una cera oxidada del polietileno de dispersión alta.
AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...Vea Mas
AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 519 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 519 is compatible with all known polymer dispersions and plasticizers. Vea Menos
Emulsión de la Cera para revestimientos de efecto transmitidos por agua . Emulsión de una cera aniónico-modificada de Acetato-Copolímero de Etileno-Vinilo (EVA).
AQUACER 528 is an emulsion based on an ethylene-acrylic acid-copolymer wax for improving the surface properties of aqueous care products. It offers strong anti-slip effect and good foot traffic resistance.
AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks.
Emulsión de cera, para mejorar las propiedades de superficie de pinturas y de tintas de impresión industriales, transmitidos por agua. Emulsión no-iónica basada en una cera modificada de polietileno.
Cera de emulsión para mejorar las propiedades de superficie de los sistemas de pintura, transmitidos por agua. Emulsión aniónica basada en una cera de parafina modificada.
Ceras de emulsión para mejorar las propiedades de superficie de sistemas transmitidos por agua. Emulsión aniónica basada en una cera de parafina modificada.
Ceras de emulsión para mejorar las propiedades de superficie de sistemas transmitidos por agua. Emulsión no-iónica basada en una cera de parafina modificada.
Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de la tintas de impresión, acuosos. Emulsión no iónica basada en una cera oxidada del polietileno de dispersión alta.
AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the ...Vea Mas
AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. Vea Menos
AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts.
Cera de emulsión para mejorar el anti-deslizamiento en los sistemas de pintura y de tintas de impresión transmitidos por agua. Emulsión no-iónica de una cera modificada de polipropileno.
AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack...Vea Mas
AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack effect. Vea Menos
Ceras de emulsión para mejorar las propiedades de superficie de los sistemas de pintura transmitidos por agua . Emulsión catiónica de una cera oxidada de polietileno de dispersión alta.
Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de pintura y de tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta.
Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de la pintura y de las tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta.
Emulsión de cera modificadora por reología, para mejorar la orientación de los pigmentos de efecto en sistemas transmitidos por agua. Emulsión de una cera Copolímera de Etileno-Vinilo-Acetato (EVA), modificada.
BYK-011 is a silicone-free, polymer-based defoamer for aqueous coating systems (also radiation curable systems). It is particularly recommended for two pack polyurethane systems and offers very good recoatability.
BYK-015 is a silicone-free, polymer-based defoamer with anti-popping properties for aqueous coatings. Particularly recommended for automotive and industrial coatings.
Antiespumante de aceite mineral para pinturas y yesos de emulsión. Mezcla de aceites minerales con base de parafina y componentes hidrofóbicos, conteniendo silicón.
Antiespumante de aceite mineral para pinturas de emulsión, emulsiones industriales, yesos de emulsión y adhesivos de emulsión; para des-airar durante la producción y la aplicación.
Antiespumante del aceite mineral para pinturas de emulsión, emulsiones industriales, yesos de emulsión y adhesivos de emulsión; para des-airar durante la producción y la aplicación.
BYK-039 is a mineral oil-based, VOC- and silicone-free defoamer for aqueous emulsion systems within a PVC range of 35-70. Does not contain alkylphenol ethoxylates. Also suitable for high-solid PUR leather coatings.
Un antiespumante libre de silicón y aditivo liberador de aire para sistemas solvente-basados y sin solvente. Es especialmente adecuado para sistemas sin solvente como los pisos de epoxi y de PUR (Poliuretano).
BYK®-081 es un antiespumante libre de flúor para sistemas amino-neutralizados y a base de solventes. Es un antiespumante muy espontáneo y efectivo. Se puede utilizar en sistemas de revestimiento amino-neutralizados, reducibles en agua y en revestimientos ...Vea Mas
BYK®-081 es un antiespumante libre de flúor para sistemas amino-neutralizados y a base de solventes. Es un antiespumante muy espontáneo y efectivo. Se puede utilizar en sistemas de revestimiento amino-neutralizados, reducibles en agua y en revestimientos a base de solventes. Es especialmente apropiado para sistemas alquídicos con alto contenido de sólidos en el sector de revestimientos arquitectónicos. El aditivo muestra buena compatibilidad con revestimientos transparentes. BYK®-081 no es apropiado para sistemas acuosos que contengan poca cantidad o que directamente no contengan solventes orgánicos como co-solventes. Vea Menos
Antiespumante de silicón de alta persistencia para sistemas acuosos. Mezcla de polisiolaxanos destructores de espuma y de sólidos hidrofóbicos en poliglicol.
BYK-1611 is a VOC-free silicone-containing defoamer for aqueous coatings and adhesives. Preferably used in dispersion systems within a PVC range of 35-70. Cost-effective alternative to mineral oil defoamers.
BYK-1616 is a silicone-containing defoamer for aqueous printing inks and overprint varnishes, as well as aqueous wood and furniture coatings and general industrial coatings.
BYK-1617 is a VOC-free silicone-containing defoamer for aqueous architectural coatings and adhesives. Preferably used in dispersion systems within a PVC range of 60-85. Cost-effective alternative to mineral oil defoamers.
BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage.
BYK-1679 is a silicone defoamer on the basis of an emulsion for aqueous textile coatings. It is a very easy to incorporate defoamer for aqueous adhesive systems. The additive is extremely well suited to being incorporated without high shear forces in very...Vea Mas
BYK-1679 is a silicone defoamer on the basis of an emulsion for aqueous textile coatings. It is a very easy to incorporate defoamer for aqueous adhesive systems. The additive is extremely well suited to being incorporated without high shear forces in very low viscosity systems. It is particularly suitable for defoaming primary PE emulsions (e.g. HORDAMER types). BYK-1679 is a suitable defoamer for use in the cooling water circuit when performing the underwater granulation of hot melt adhesives where HORDAMER is being used as an anti-blocking additive. Vea Menos
BYK®-1709 is a silicone-containing defoamer for aqueous pigment concentrates for use in coatings, printing inks and overprint varnishes. Prevents foam during grinding. Long-term and shear stability. Particularly suited to resin-free grinds (slurries).
BYK®-1710 es una mezcla de polímeros destructores de espuma y sólidos hidrofóbicos. Este producto posee excelentes propiedades antiespumantes, especialmente en pinturas de emulsión alquídica, híbridos, PU, y revestimientos de EP.
BYK-1723 is a VOC-free silicone-containing defoamer for aqueous architectural coatings, and adhesives. Preferably used in dispersion systems within a PVC range of 60-85. Cost-effective alternative to mineral oil defoamers.
BYK-1724 is a VOC-free silicone-containing defoamer for aqueous emulsion paints, printing inks, overprint varnishes, and emulsion adhesives. Compatible defoamer. All-purpose and easy to incorporate.
Antiespumante de silicón, COV ( Compuesto Organico Volatil)-libre, para sistemas acuosos. Mezcla de polisiolaxanos destructores de espuma y de sólidos hidrofóbicos en poliglicol.
BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings.
BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems.
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
Lo sentimos pero la industria que ha escogido no esta disponible en el idioma seleccionado en este momentos. Usted puede seleccionar un idioma a continuación para avanzar en esta industria o cerrar este dialogo.
