| B-TOUGH A1, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A1 is recommended for use in liquid type epoxy systems (lowest polarity grade). | |
| B-TOUGH A2, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A2 is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). | |
| B-TOUGH A3, TOUGHENING AGENT FOR EPOXY ADHESIVES | Croda Coatings & Polymers | Epoxy functionalized toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. B-Tough A3 is recommended for use in solid type epoxy formulations (medium polarity grade). | |
| Brij™ C2 | Croda Coatings & Polymers | Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...Vea Mas Brij™ C2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ C20 | Croda Coatings & Polymers | Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...Vea Mas Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ L23 | Croda Coatings & Polymers | Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...Vea Mas Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ L4 | Croda Coatings & Polymers | Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...Vea Mas Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ O10 | Croda Coatings & Polymers | Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...Vea Mas Brij™ O10 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ O2 | Croda Coatings & Polymers | Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...Vea Mas Brij™ O2 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ O20 | Croda Coatings & Polymers | Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...Vea Mas Brij™ O20 is a multifunctional, non-silicone and non-fluorinated pale yellow liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ S10 | Croda Coatings & Polymers | Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...Vea Mas Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ S100 | Croda Coatings & Polymers | Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...Vea Mas Brij™ S100 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ S2 | Croda Coatings & Polymers | Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...Vea Mas Brij™ S2 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ S20 | Croda Coatings & Polymers | Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...Vea Mas Brij™ S20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| Brij™ S721 | Croda Coatings & Polymers | Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety...Vea Mas Brij™ S721 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. Vea Menos | |
| CRODACOR BE | Croda Coatings & Polymers | Inhibidor de corrosión soluble en agua compatible con una amplia gama de formulaciones, particularmente formulaciones de base acuosa contenidas dentro de las latas aerosol de acero estañado. | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...Vea Mas Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. Vea Menos | |
| Crodamide S | Croda Coatings & Polymers | Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pre...Vea Mas Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures. This product is used to prevent adhesive granulates from sticking together during storage at moderate and low temperatures. Crodamide S also prevents adhesive film layers to attract dirt or stick together before application by reactivation or melting. It can be incorporated directly into polymers to prevent any unwanted adhesion. The amide migrates fast to the surface of the material on cooling to form a non-sticking ‘release’ layer. It may be used in conjunction with organic additives such as talc to enhance performance. Vea Menos | |
| Hypermer A70 | Croda Coatings & Polymers | Emulsor polimérico O/W y dispersor en líquidos no polares para estabilidad coloidal superior y impacto mínimo en propiedades de revestimiento. | |
| LoVOCoat Form 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Form 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in Exxsol D80. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| LoVOCoat Stable 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Stable 100 - Polymeric Surfactant is a polymeric surfactant and is 20% in water. It is especially developed to develop high quality, low VOC trim paints, varnishes, and stains. | |
| Maxemul 5010 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Surfactante no iónico de copolimerizable utilizado como emulsor O/W. | |
| Maxemul 5011 - Copolymerizable Nonionic Surfactant | Croda Coatings & Polymers | Surfactante no migratorio, no iónico para resistencia de humedad excelente, buena tolerancia electrolítica y estabilidad de emulsión en sistemas de látex para revestimientos y adhesivos. | |
| Maxemul 6106 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Surfactante no migratorio, aniónico para estabilidad superior de emulsión en sistemas de látex y resistencia de humedad excelente, tiene propiedades antiestáticas en revestimientos o películas adhesivas. | |
| Maxemul 6112 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Surfactante no migratorio, aniónico para estabilidad superior de emulsión en sistemas de látex y excelente resistencia a la humedad o propiedades adhesivas en revestimientos o psa's. | |
| Maxemul™ 7000 Series | Croda Coatings & Polymers | Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory dir...Vea Mas Maxemul™ 7000 Series are novel polymeric non-migratory and polymeric reactive emulsifiers. The coatings produced from these resin emulsions result in properties that are essentially equal to that of solvent-borne systems. The current global regulatory directives will dramatically change the coatings market in the coming years and solvent-borne resins could disappear. One use of these polymeric non-migratory or reactive emulsifiers is to produce zero VOC resin emulsions to overcome these regulatory issues. Vea Menos | |
| Maxemul™ 7201 | Croda Coatings & Polymers | Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range o...Vea Mas Maxemul™ 7201 is an anionic surfactant, oil soluble, resin compatible, pigment wetter and dispersant for aqueous and non-aqueous dispersions, resin emulsifier, and compatibiliser. It has improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. This product is used for industrial coatings and decorative coatings and paints. Vea Menos | |
| Maxemul™ 8201 | Croda Coatings & Polymers | Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has impro...Vea Mas Maxemul™ 8201 is a reactive nonionic polymeric emulsifier that produces zero VOC resin emulsions with small particle size and good shelf-life. Its film properties such as drying rate and hardness are equal to solvent borne resin systems. It also has improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. Vea Menos | |
| Maxemul™ 9107 – A Versatile Emulsifier for VOC Free Epoxy Emulsions | Croda Coatings & Polymers | Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film ...Vea Mas Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film properties. Its versatility makes it suitable for floor coatings, wall paints and direct-to-metal applications. Vea Menos | |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ Multifunctional Wetting Agents Sample Kit | Croda Coatings & Polymers | Multiwet™ Multifunctional Wetting Agents Sample Kit offers a range of functionalities to suit any aqueous formulation. The kit contains 5 Multiwet products. | |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| Myrj™ S100 | Croda Coatings & Polymers | Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applica...Vea Mas Myrj™ S100 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. Vea Menos | |
| Myrj™ S40 | Croda Coatings & Polymers | Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicat...Vea Mas Myrj™ S40 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. Vea Menos | |
| Myrj™ S8 | Croda Coatings & Polymers | Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applicati...Vea Mas Myrj™ S8 is a solid O/W emulsifier. It is a highly efficient emulsifier with improved cycle time and excellent stability. It covers a wide range of HLB values to match your formulation needs. This product is used for decorative coating and paint applications. Vea Menos | |
| Priamine™ 1073 | Croda Coatings & Polymers | Priamine™ 1073 is for high end polyamide applications, for which it offers the highest purity and di-functionality. | |
| Priamine™ 1074 | Croda Coatings & Polymers | Priamine™ 1074 is for high end polyamide applications, for which it offers the highest purity and di-functionality. | |
| Priamine™ 1075 | Croda Coatings & Polymers | Priamine™ 1075 is for high molecular weight polyamides for high-end applications. This dimer diamine grade has a high purity, high difunctionality and low color. | |
| Priplast™ 1838 Polyester Diol | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero, bloque básico de construcción para los adhesivos PU (Poliuretano), sellantes y elastómeros que proporcionan una hidrofobicidad extrema, color y durabilidad excelente y buenas propiedades de flujo y de hum...Vea Mas Poliol de poliéster a base de acido graso dímero, bloque básico de construcción para los adhesivos PU (Poliuretano), sellantes y elastómeros que proporcionan una hidrofobicidad extrema, color y durabilidad excelente y buenas propiedades de flujo y de humectación en los substratos no polares, como los plásticos. Vea Menos | |
| Priplast™ 1839 Polyester Diol | Croda Coatings & Polymers | Diol de poliéster con un valor de acidez de 1. | |
| Priplast™ 2101 | Croda Coatings & Polymers | Resina epóxido-endurecida que proporciona flexibilidad. | |
| Priplast™ 2102 | Croda Coatings & Polymers | Resina epóxido-endurecida que aumenta la hidrofobicidad, la intemperización y la compatibilidad con matrices orgánicas (alquitrán etc.). | |
| Priplast™ 2103 | Croda Coatings & Polymers | Resina y adhesivo epóxido-endurecida. | |
| Priplast™ 2104 | Croda Coatings & Polymers | Resina epóxido-endurecida hecha con materias primas naturales. | |
| Priplast™ 3162 Polyester Diol | Croda Coatings & Polymers | Diol de poliéster. | |
| Priplast™ 3172 Polyester Diol | Croda Coatings & Polymers | Diol de poliéster con un rango de valor de hidróxido de 35 a 41. | |
| Priplast™ 3186 Polyester Polyol | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero, bloque básico de construcción para los adhesivos reticulados de PU (Poliuretano), espumas y sellantes; proporciona una excelente estabilidad hidrolítica y repelencia al agua. | |
| Priplast™ 3187 | Croda Coatings & Polymers | Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent w...Vea Mas Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent water resistance, hydrolytic stability, and good flow and wetting properties. This product is used for adhesives & sealants and elastomers applications. Vea Menos | |
| Priplast™ 3190 | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero, líquido, semi-cristalino, bloque básico de construcción para revestimientos de PU (Poliuretano), adhesivos y sellantes con buena compatibilidad con los polioles de poliéter y poliéster. | |
| Priplast™ 3192 | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero, semi-cristalino, bloque básico de construcción para revestimientos de PU (Poliuretano) y adhesivos con excelente resistencia hidrolítica y propiedades mecánicas. | |
| Priplast™ 3196 Polyester Diol | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero, bloque básico de construcción para sellantes y elastómeros de PU (Poliuretano), que proporcionan una hidrofobicidad extrema, durabilidad excelente y buena compatibilidad con hidrocarburo para el mezclas d...Vea Mas Poliol de poliéster a base de acido graso dímero, bloque básico de construcción para sellantes y elastómeros de PU (Poliuretano), que proporcionan una hidrofobicidad extrema, durabilidad excelente y buena compatibilidad con hidrocarburo para el mezclas de polímero. Con posible utilización en aplicaciones suaves al tacto. Vea Menos | |
| Priplast™ 3198 Polyester Polyol | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero de bajo MW, bloque básico de construcción para revestimientos de PU (Poliuretano), adhesivos y sellantes con buena compatibilidad con los polioles de poliéter y de poliéster, y hidrofobicidad excelente. | |
| Priplast™ 3286 | Croda Coatings & Polymers | Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow an...Vea Mas Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow and wetting properties. This product is used for adhesives & sealants, foams, and industrial coating applications. Vea Menos | |
| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative ...Vea Mas Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. Vea Menos | |
| Pripol 1006 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Acido dímero hidrogenado de Poliuretano elevada, bloque básico de construcción para epóxido, poliuretano, poliéster, y para revestimientos y adhesivos de poliamida. Proporciona un buen color, repelencia al agua, flexibilidad, estabilidad termo-oxidativa ...Vea Mas Acido dímero hidrogenado de Poliuretano elevada, bloque básico de construcción para epóxido, poliuretano, poliéster, y para revestimientos y adhesivos de poliamida. Proporciona un buen color, repelencia al agua, flexibilidad, estabilidad termo-oxidativa y excelente hidrólisis/ resistencia química. Vea Menos | |
| Pripol™ 1006 F | Croda Coatings & Polymers | Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wettin...Vea Mas Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1006 F also is approved for food contact applications. Vea Menos | |
| Pripol 1009 Dimer Acid Hydrogenated | Croda Coatings & Polymers | Acido dímero hidrogenado, bloque básico de construcción con alta difuncionalidad para revestimientos de epóxido, poliuretano, poliéster y de poliamida, adhesivos y plásticos /elastómeros. Proporciona repelencia al agua, flexibilidad, estabilidad termo-ox...Vea Mas Acido dímero hidrogenado, bloque básico de construcción con alta difuncionalidad para revestimientos de epóxido, poliuretano, poliéster y de poliamida, adhesivos y plásticos /elastómeros. Proporciona repelencia al agua, flexibilidad, estabilidad termo-oxidativa y excelente hidrólisis/resistencia química. Vea Menos | |
| Pripol™ 1010 | Croda Coatings & Polymers | Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, im...Vea Mas Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, advanced ceramics, and industrial coating applications. Vea Menos | |
| Pripol™ 1010 F | Croda Coatings & Polymers | Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, ...Vea Mas Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1010 F also is approved for food contact applications. Vea Menos | |
| Pripol™ 1013 | Croda Coatings & Polymers | Pripol™ 1013 is a high purity dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysi...Vea Mas Pripol™ 1013 is a high purity dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. Vea Menos | |
| Pripol™ 1017 | Croda Coatings & Polymers | Pripol™ 1017 is a dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemic...Vea Mas Pripol™ 1017 is a dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. Vea Menos | |
| Pripol™ 1025 | Croda Coatings & Polymers | Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow an...Vea Mas Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. Vea Menos | |
| Pripol™ 1025 F | Croda Coatings & Polymers | Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chem...Vea Mas Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product also features good flow and wetting properties and is approved for food contact applications. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. Vea Menos | |
| Pripol™ 1027 | Croda Coatings & Polymers | Pripol™ 1027 is a low color grade, dimer acid building block for epoxy, polyurethane, as well as polyester and polyamide coatings and adhesives. It is used for resin modification that brings extreme water repellency, improved flexibility, excellent hydrol...Vea Mas Pripol™ 1027 is a low color grade, dimer acid building block for epoxy, polyurethane, as well as polyester and polyamide coatings and adhesives. It is used for resin modification that brings extreme water repellency, improved flexibility, excellent hydrolysis and chemical resistance, hydrolytic stability, as well as good flow and wetting properties. Vea Menos | |
| Pripol 2033 Dimerdiol | Croda Coatings & Polymers | Diol dímero, bloque básico de construcción con alta difuncionalidad para revestimientos de poliuretano y de poliéster, adhesivos y elastómeros. Proporciona buen color, repelencia al agua, flexibilidad, estabilidad termo-oxidativa y excepcional hidrólisis...Vea Mas Diol dímero, bloque básico de construcción con alta difuncionalidad para revestimientos de poliuretano y de poliéster, adhesivos y elastómeros. Proporciona buen color, repelencia al agua, flexibilidad, estabilidad termo-oxidativa y excepcional hidrólisis/resistencia química. Vea Menos | |
| Pycal® 94 | Croda Coatings & Polymers | Plastificante para adhesivos de emulsión. | |
| Span™ 20 | Croda Coatings & Polymers | Span™ 20 is a W/O emulsifier, O/W co-emulsifier, pigment dispersant, and carrier liquid. It has particle morphology control in S-PVC. As a highly efficient emulsifier, it has improved cycle time and excellent stability, covering a wide range of HLB values...Vea Mas Span™ 20 is a W/O emulsifier, O/W co-emulsifier, pigment dispersant, and carrier liquid. It has particle morphology control in S-PVC. As a highly efficient emulsifier, it has improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It also is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. Vea Menos | |
| Span™ 40 | Croda Coatings & Polymers | Span™ 40 is a W/O emulsifier and O/W co-emulsifier, pigment dispersant and carrier liquid. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Span™ 60 | Croda Coatings & Polymers | Span™ 60 is a W/O emulsifier and O/W co-emulsifier, pigment dispersant in non-polar liquids. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Span™ 85 | Croda Coatings & Polymers | Span™ 85 is an easy to handle W/O emulsifier and dispersing agent for a-polar liquids. It is a primary emulsifier for inverse emulsion polymerisation with improved cycle time and excellent stability, covering a wide range of HLB values to match your formu...Vea Mas Span™ 85 is an easy to handle W/O emulsifier and dispersing agent for a-polar liquids. It is a primary emulsifier for inverse emulsion polymerisation with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. Vea Menos | |
| Synperonic™ 13/12 | Croda Coatings & Polymers | Synperonic™ 13/12 is a nonionic surfactant with good pigment wetting and emulsifying properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Synperonic™ 13/6 | Croda Coatings & Polymers | Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional...Vea Mas Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. Vea Menos | |
| Synperonic™ T/1301 | Croda Coatings & Polymers | Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle t...Vea Mas Synperonic™ T/1301 is an effective defoamer as well as a polyether polyol building block with enhanced reactivity. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. Vea Menos | |
| Synperonic™ T/908 | Croda Coatings & Polymers | Synperonic™ T/908 is an excellent cross-linker for hydrophilic PU systems. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a ...Vea Mas Synperonic™ T/908 is an excellent cross-linker for hydrophilic PU systems. It is an effective dispersant for solid particles in water or lower alcohols. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. Vea Menos | |
| Tween™ 21 | Croda Coatings & Polymers | Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...Vea Mas Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. Vea Menos | |
| Tween™ 40 | Croda Coatings & Polymers | Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...Vea Mas Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. Vea Menos | |
| Zephrym™ 3300-B | Croda Coatings & Polymers | Zephrym™ 3300-B is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. This product is well...Vea Mas Zephrym™ 3300-B is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. This product is well suited for both organic and inorganic pigments and fillers. Vea Menos | |
| Zephrym™ ColorFX Carbon Black Pigment Dispersant | Croda Coatings & Polymers | Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, signifi...Vea Mas Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, significantly lowers usage levels, lower viscosity and improved stability. Vea Menos | |
| Zephrym™ PD 2206 | Croda Coatings & Polymers | Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced di...Vea Mas Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced dispersion of particles in low polarity solvent and resin systems. This product is well suited for both organic and inorganic pigments and fillers, as well as carbon black. It is FDA indirect food contact approved and provides excellent performance in liquid color for plastics. Vea Menos | |
| Zephrym™ PD 2234 | Croda Coatings & Polymers | Zephrym™ PD 2234 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improv...Vea Mas Zephrym™ PD 2234 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improved dispersion viscosity, longer storage capability, and superior color development in low polarity non-aqueous systems. It is particularly well suited for both organic and inorganic pigments. Vea Menos | |
| Zephrym™ PD 2246 | Croda Coatings & Polymers | Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improve...Vea Mas Zephrym™ PD 2246 is a solid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It also has improved dispersion of particles in low polarity non-aqueous systems. It is well suited for both organic and inorganic pigments and fillers, as well as carbon black. This product has very good high temperature and high shear stability. Vea Menos | |
| Zephrym™ PD 3315 | Croda Coatings & Polymers | Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of wi...Vea Mas Zephrym™ PD 3315 is a liquid, anionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It is capable of withstanding high ion concentrations. Vea Menos | |
| Zephrym™ PD 4913 | Croda Coatings & Polymers | Zephrym™ PD 4913 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has superior di...Vea Mas Zephrym™ PD 4913 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has superior dispersion capabilities for organic pigments, as well as inorganic pigments and fillers in aqueous environments. It produces high quality dispersions using untreated pigments. Vea Menos | |
| Zephrym™ PD 4974 Iron Oxide Pigment Dispersant | Croda Coatings & Polymers | Zephrym™ PD 4974 Iron Oxide Pigment Dispersant is a low VOC polymeric dispersant specifically designed for iron oxide pigments. It dramatically improves stability, enhances color development and reduces the need for thickeners. | |
| Zephrym™ PD 7000 | Croda Coatings & Polymers | Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dis...Vea Mas Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dispersion of carbon black, inorganic pigments and fillers, and for use in electronics and adhesives applications. Vea Menos |
