| Acetyl Tributyl Citrate (ATBC) | ChemCeed | El citrato de tributilo acetilado (Acetyl Tributyl Citrate, ATBC) se usa como plastificante biodegradable para PVC y derivados de celulosa, está aprobado para estar presente en los materiales que entran en contacto con alimentos e incluso puede usarse com...Vea Mas El citrato de tributilo acetilado (Acetyl Tributyl Citrate, ATBC) se usa como plastificante biodegradable para PVC y derivados de celulosa, está aprobado para estar presente en los materiales que entran en contacto con alimentos e incluso puede usarse como aditivo en estos. El ATBC se usa, además, como emoliente en los productos cosméticos/de cuidado personal, como aerosoles para el cabello o esmaltes para uñas. Además, el ATBC se puede usar en recubrimientos farmacéuticos (disponible la graduación de la Farmacopea de los Estados Unidos [United States Pharmacopoeia, USP]), lubricantes y tintas. Vea Menos | |
| Benzotriazole | ChemCeed | El benzotriazol es un inhibidor de corrosión para cobre y aleaciones de cobre, y se usa comúnmente en sistemas de enfriamiento de agua. Entre las aplicaciones adicionales del benzotriazol, se encuentran el uso como agente de pulido para plata en detergent...Vea Mas El benzotriazol es un inhibidor de corrosión para cobre y aleaciones de cobre, y se usa comúnmente en sistemas de enfriamiento de agua. Entre las aplicaciones adicionales del benzotriazol, se encuentran el uso como agente de pulido para plata en detergentes de vajilla, anticongelante para automotores, antióxido para fotografías y se usa como aditivo para lubricantes. Vea Menos | |
| Benzyl Alcohol USP | ChemCeed | El alcohol bencílico se usa como disolvente de pinturas, tintas y revestimientos. En productos para cuidado personal, el alcohol bencílico sirve como precursor en la producción de ésteres usados en jabones, perfumes y saborizantes. En el uso médico, el al...Vea Mas El alcohol bencílico se usa como disolvente de pinturas, tintas y revestimientos. En productos para cuidado personal, el alcohol bencílico sirve como precursor en la producción de ésteres usados en jabones, perfumes y saborizantes. En el uso médico, el alcohol bencílico se emplea como preservante debido a sus propiedades bacteriostáticas y antipruríticas. Vea Menos | |
| Benzyl Benzoate, USP | ChemCeed | El benzoato de bencilo es un plastificante de éster de benzoato de alta solvatación que se puede usar en aplicaciones tales como adhesivos, calafateos y selladores. En tintas y revestimientos, el benzoato de bencilo puede suavizar aglutinantes para mejora...Vea Mas El benzoato de bencilo es un plastificante de éster de benzoato de alta solvatación que se puede usar en aplicaciones tales como adhesivos, calafateos y selladores. En tintas y revestimientos, el benzoato de bencilo puede suavizar aglutinantes para mejorar la flexibilidad. Vea Menos | |
| Butyl Benzyl Phthalate (BBP) | ChemCeed | El butil bencil ftalato (BBP) es un plastificante de rápida fusión y alta solvatación con gran eficiencia, que puede usarse con una variedad de resinas. El BBP se usa para múltiples operaciones de formación de hojas de PVC y extrusión, y constituye un est...Vea Mas El butil bencil ftalato (BBP) es un plastificante de rápida fusión y alta solvatación con gran eficiencia, que puede usarse con una variedad de resinas. El BBP se usa para múltiples operaciones de formación de hojas de PVC y extrusión, y constituye un estándar de la industria de pisos de vinilo. El BBP también se emplea en muchos revestimientos, tintas, adhesivos y calafateos. Vea Menos | |
| CELLOXIDE 2000 | Daicel (U.S.A.), Inc. | CELLOXIDE 2000 is a cycloaliphatic epoxy resin containing a vinyl group. This product has almost no difunctional epoxy, which is a highly toxic byproduct. It is possible to synthesize derivatives containing a cycloaliphatic epoxy through the hydrosilylati...Vea Mas CELLOXIDE 2000 is a cycloaliphatic epoxy resin containing a vinyl group. This product has almost no difunctional epoxy, which is a highly toxic byproduct. It is possible to synthesize derivatives containing a cycloaliphatic epoxy through the hydrosilylation with vinyl group. Also, this product can be used as reactive diluent because of its low viscosity. Vea Menos | |
| CELLOXIDE 2021P | Daicel (U.S.A.), Inc. | CELLOXIDE 2021P can be easily cured by heat with acid anhydrides or phenol type curing agents. It is also possible to cure by heat or ultraviolet light when using a cationic catalyst. Since it has a high heat distortion temperature, electrical insulation ...Vea Mas CELLOXIDE 2021P can be easily cured by heat with acid anhydrides or phenol type curing agents. It is also possible to cure by heat or ultraviolet light when using a cationic catalyst. Since it has a high heat distortion temperature, electrical insulation and excellent transparency, the cured product can be used in electrical insulating varnish, sealant applications and composite. Vea Menos | |
| CELLOXIDE 2081 | Daicel (U.S.A.), Inc. | CELLOXIDE 2081 is a cycloaliphatic epoxy resin with excellent flexibility. It can be used in applications such as electrical insulating varnish and semiconductor sealant casts which require flexibility. Also, when blended with other epoxy resins, it is po...Vea Mas CELLOXIDE 2081 is a cycloaliphatic epoxy resin with excellent flexibility. It can be used in applications such as electrical insulating varnish and semiconductor sealant casts which require flexibility. Also, when blended with other epoxy resins, it is possible to impart flexibility. Vea Menos | |
| CELLOXIDE 8000 | Daicel (U.S.A.), Inc. | CELLOXIDE 8000 is a difunctional cycloaliphatic epoxide. It can be easily cured by heat or ultraviolet light with high speed when using a cationic catalyst. It is also possible to cure by heat with acid anhydrides or phenol type curing agents. Since its c...Vea Mas CELLOXIDE 8000 is a difunctional cycloaliphatic epoxide. It can be easily cured by heat or ultraviolet light with high speed when using a cationic catalyst. It is also possible to cure by heat with acid anhydrides or phenol type curing agents. Since its cured materials have a highest hardness in epoxy products, they can be used to provide a hard coating or an alternative to glass. Vea Menos | |
| CELLOXIDE 8100 | Daicel (U.S.A.), Inc. | CELLOXIDE 8100 is a difunctional cycloaliphatic epoxide. It can be easily cured by heat or ultraviolet light when using a cationic catalyst. It is also possible to cure by heat with acid anhydrides or phenol type curing agents. It is especially excellent ...Vea Mas CELLOXIDE 8100 is a difunctional cycloaliphatic epoxide. It can be easily cured by heat or ultraviolet light when using a cationic catalyst. It is also possible to cure by heat with acid anhydrides or phenol type curing agents. It is especially excellent in yellowing resistance and reactivity of cationic curing. Since it has a high heat distortion temperature with transparency, the cured product can be used to provide an optical material or an alternative to glass. Vea Menos | |
| CYCLOMER M100 | Daicel (U.S.A.), Inc. | CYCLOMER M100, compared with GMA, is hard to gel when it is copolymerized with methacrylic acid. It has also good cationic reactivity. CYCLOMER M100 can be radically copolymerized with vinyl monomer such as styrene, methacrylate ester and ethylene, and ca...Vea Mas CYCLOMER M100, compared with GMA, is hard to gel when it is copolymerized with methacrylic acid. It has also good cationic reactivity. CYCLOMER M100 can be radically copolymerized with vinyl monomer such as styrene, methacrylate ester and ethylene, and can introduce a cycloaliphatic epoxy group into the side chain of the polymer. Using the reaction of the functional group having active hydrogen and cycloaliphatic epoxy, a methacryl group can be introduced into CYCLOMER M100 monomer or copolymer. CYCLOMER M100 is suitable for the introduction of the epoxy group to aqueous resin, because the cycloaliphatic epoxy group is stable in the water. Vea Menos | |
| Decabromodiphenyl Oxide | ChemCeed | El óxido de decabromodifenilo se usa como retardador de llama para elastómeros, alambres y cables, revestimientos textiles, equipos eléctricos y electrónicos, repuestos automotrices y materiales de construcción. | |
| Denatonium Benzoate, 20% in EG | ChemCeed | El benzoato de denatonio es un agente amargo que se usa para dar sabor amargo a los productos tóxicos para que estos sean más difíciles de ingerir. Entre los ejemplos de uso de benzoato de denatonio se encuentran los anticongelantes, detergentes, limpiado...Vea Mas El benzoato de denatonio es un agente amargo que se usa para dar sabor amargo a los productos tóxicos para que estos sean más difíciles de ingerir. Entre los ejemplos de uso de benzoato de denatonio se encuentran los anticongelantes, detergentes, limpiadores de pisos, removedores de pintura y limpiadores de retretes. Vea Menos | |
| Dibutyl Maleate (DBM) | ChemCeed | El dibutil maleato (DBM) es un plastificador para resinas de vinilo y se usa en aplicaciones de copolímeros que involucran acetatos de vinilo y PVC. El dibutil maleato es un éster no saturado que se usa para crear surfactantes sulfosuccinatos en detergent...Vea Mas El dibutil maleato (DBM) es un plastificador para resinas de vinilo y se usa en aplicaciones de copolímeros que involucran acetatos de vinilo y PVC. El dibutil maleato es un éster no saturado que se usa para crear surfactantes sulfosuccinatos en detergentes y pinturas. Otras aplicaciones del DBM incluyen el uso en plastisoles, dispersiones, revestimientos, adhesivos y lubricantes sintéticos. Vea Menos | |
| Dibutyl Phthalate (DBP) | ChemCeed | El dibutil ftalato (DBP) es un plastificante usado en aplicaciones tales como adhesivos, lacas y tintas de impresión. El dibutil ftalato se puede usar como plastificante secundario con otras ftalatos para compuestos de PVC altamente concentrados. | |
| Dibutyl Sebacate (DBS) | ChemCeed | El dibutil sebacato (DBS) se usa como plastificante apto para bajas temperaturas y es compatible con PVC, acrílicos, caucho nitrilo y celulosas. Debido a su rendimiento no tóxico y de baja temperatura, el DBS es ideal para las películas de vinilo que entr...Vea Mas El dibutil sebacato (DBS) se usa como plastificante apto para bajas temperaturas y es compatible con PVC, acrílicos, caucho nitrilo y celulosas. Debido a su rendimiento no tóxico y de baja temperatura, el DBS es ideal para las películas de vinilo que entran en contacto con alimentos. Además, el dibutil sebacato se usa en revestimientos, productos cosméticos, lubricantes y productos farmacéuticos. Vea Menos | |
| Diisodecyl Adipate (DIDA) | ChemCeed | El diisodecil adipato (DIDA) es un plastificante con excelentes propiedades a baja temperatura. El DIDA funciona bien como parte de una mezcla plastificante y es compatible con PVC, acetato-butirato de celulosa, etil celulosa, nitrocelulosa, policloropren...Vea Mas El diisodecil adipato (DIDA) es un plastificante con excelentes propiedades a baja temperatura. El DIDA funciona bien como parte de una mezcla plastificante y es compatible con PVC, acetato-butirato de celulosa, etil celulosa, nitrocelulosa, policloropreno y butiral de polivinilo. En tintas y revestimientos, el DIDA puede suavizar los aglutinantes para mejorar la flexibilidad. El DIDA también puede usarse en adhesivos, calafateos, selladores y pinturas para mejorar sus propiedades. Vea Menos | |
| Diisodecyl Phthalate (DIDP) | ChemCeed | El diisodecil ftalato (DIDP) es un plastificante de alto peso molecular, de uso general. Como plastificante de PVC, el DIDP se usa en fórmulas de tintas de impresión en pantallas. Asimismo, el DIDP se puede usar en aplicaciones tales como revestimientos d...Vea Mas El diisodecil ftalato (DIDP) es un plastificante de alto peso molecular, de uso general. Como plastificante de PVC, el DIDP se usa en fórmulas de tintas de impresión en pantallas. Asimismo, el DIDP se puede usar en aplicaciones tales como revestimientos de látex, tintas de impresión, revestimientos textiles, de papel, de cuero, tintas, adhesivos y selladores. Vea Menos | |
| Diisononyl Phthalate (DINP) | ChemCeed | El diisononilftalato (DINP) es un plastificante de alto peso molecular, de uso general. Como plastificante de PVC, el DINP se usa en fórmulas de tintas de impresión en pantallas. Además, el DINP se puede aplicar en pinturas anticorrosivas, pinturas antiin...Vea Mas El diisononilftalato (DINP) es un plastificante de alto peso molecular, de uso general. Como plastificante de PVC, el DINP se usa en fórmulas de tintas de impresión en pantallas. Además, el DINP se puede aplicar en pinturas anticorrosivas, pinturas antiincrustantes, lacas, tintas, adhesivos y selladores. Vea Menos | |
| Dimethyl Sebacate (DMS) | ChemCeed | El dimetil sebacato (DMS) es un plastificante para resinas de nitrocelulosa, caucho y vinilo. El dimetil sebacato se usa en la producción de estabilizadores ligeros que se usan en revestimientos para proteger superficies y pigmentos contra la fotodegradac...Vea Mas El dimetil sebacato (DMS) es un plastificante para resinas de nitrocelulosa, caucho y vinilo. El dimetil sebacato se usa en la producción de estabilizadores ligeros que se usan en revestimientos para proteger superficies y pigmentos contra la fotodegradación mediante la desactivación de radicales libres. El dimetil sebacato también puede usarse como disolvente para resinas y cauchos. En tintas y revestimientos, el DMS puede suavizar aglutinantes para mejorar la flexibilidad. Vea Menos | |
| Dioctyl Adipate (DOA) | ChemCeed | El dioctil adipato (DOA) es un plastificante de PVC que también se usa, comúnmente, con plastificantes primarios, como el DOP, para crear aceites de base para lubricantes. El dioctil adipato también se usa en pinturas a modo de dispersar pigmentos. Para l...Vea Mas El dioctil adipato (DOA) es un plastificante de PVC que también se usa, comúnmente, con plastificantes primarios, como el DOP, para crear aceites de base para lubricantes. El dioctil adipato también se usa en pinturas a modo de dispersar pigmentos. Para las aplicaciones que implican alimentos, el dioctil adipato se puede usar como plastificante en polímeros y cauchos que entran en contacto con los alimentos. Vea Menos | |
| Dioctyl Phthalate (DOP) | ChemCeed | El dioctil ftalato (DOP) es un plastificante de uso general. Como plastificante de PVC, el DOP se usa en fórmulas de tintas de impresión en pantallas. Conocido por su buena estabilidad ante el calor y la luz ultravioleta, el DOP puede usarse en aplicacion...Vea Mas El dioctil ftalato (DOP) es un plastificante de uso general. Como plastificante de PVC, el DOP se usa en fórmulas de tintas de impresión en pantallas. Conocido por su buena estabilidad ante el calor y la luz ultravioleta, el DOP puede usarse en aplicaciones tales como pinturas, lacas, tintas, adhesivos y selladores. Vea Menos | |
| Dioctyl Sebacate (DOS) | ChemCeed | El dioctil sebacato (DOS) es un plastificante libre de ftalatos usados para PVC, nitrocelulosas, resinas de estireno y cauchos sintéticos donde se requiere buen rendimiento a baja temperatura. Es soluble en hidrocarburos, alcoholes, ésteres, clorocarburos...Vea Mas El dioctil sebacato (DOS) es un plastificante libre de ftalatos usados para PVC, nitrocelulosas, resinas de estireno y cauchos sintéticos donde se requiere buen rendimiento a baja temperatura. Es soluble en hidrocarburos, alcoholes, ésteres, clorocarburos, éter, benceno y otros disolventes orgánicos. Se recomienda el DOS para uso en adhesivos y selladores. Vea Menos | |
| Dioctyl Terephthalate (DOTP) | ChemCeed | El dioctil tereftalato (DOPT) es un plastificante de uso general y se puede usar como reemplazo del ftalato. Como plastificante de PVC, el DOPT se usa en fórmulas de tintas de impresión en pantallas. Además, el DOTP se puede aplicar en pinturas, lacas, ti...Vea Mas El dioctil tereftalato (DOPT) es un plastificante de uso general y se puede usar como reemplazo del ftalato. Como plastificante de PVC, el DOPT se usa en fórmulas de tintas de impresión en pantallas. Además, el DOTP se puede aplicar en pinturas, lacas, tintas, adhesivos y selladores. Vea Menos | |
| Disodium Sebacate (DSS) | ChemCeed | El sebacato de disodio es un derivado del aceite de ricino que se puede usar en cosméticos, detergentes y como lubricante inhibidor de corrosión. | |
| EHPE3150 | Daicel (U.S.A.), Inc. | EHPE3150 is a multi-functional cycloaliphatic epoxy resin. This resin is a solid epoxy resin with a cyclohexane skeleton and terminal epoxy group. In addition, there is also EHPE3150CE, which is a liquid type diluted with cycloaliphatic epoxy. | |
| EHPE3150CE | Daicel (U.S.A.), Inc. | EHPE3150CE is a mixture of EHPE3150 and CELLOXIDE2021P. EHPE3150 is a solid multi-functional cycloaliphatic epoxy resin, but becomes liquid by dissolving it in CELLOXIDE2021P. Therefore the handling becomes easy. | |
| EPOFRIEND AT501 | Daicel (U.S.A.), Inc. | EPOFRIEND AT501 is a developed epoxidized thermoplastic elastomer. It has good compatibility with polar plastics, good adhesiveness to various substrates, and has reactive epoxy groups. | |
| EPOFRIEND CT310 | Daicel (U.S.A.), Inc. | EPOFRIEND CT310 is a developed epoxidized thermoplastic elastomer. It has good compatibility with polar plastics, good adhesiveness to various substrates, and has reactive epoxy groups. | |
| EPOLEAD GT401 | Daicel (U.S.A.), Inc. | EPOLEAD GT401 is a tetra-functional cycloaliphatic epoxide. Though EPOLEAD GT401 has multi-functional epoxy group, it is liquid. EPOLEAD GT401 has high curing rate and the cured product has toughness, flexibility and high Tg, because it has multi-function...Vea Mas EPOLEAD GT401 is a tetra-functional cycloaliphatic epoxide. Though EPOLEAD GT401 has multi-functional epoxy group, it is liquid. EPOLEAD GT401 has high curing rate and the cured product has toughness, flexibility and high Tg, because it has multi-functional epoxy group and flexible structure. Vea Menos | |
| EPOLEAD PB3600 | Daicel (U.S.A.), Inc. | EPOLEAD PB3600 is epoxidized polybutadiene which has both epoxy groups and vinyl groups in the molecules. Furthermore, EPOLEAD PB3600 has hydroxyl groups at its terminal, and the hydroxyl groups can be modified. Flexible and tough coatings are available b...Vea Mas EPOLEAD PB3600 is epoxidized polybutadiene which has both epoxy groups and vinyl groups in the molecules. Furthermore, EPOLEAD PB3600 has hydroxyl groups at its terminal, and the hydroxyl groups can be modified. Flexible and tough coatings are available by combining with the suitable polyamines and acid anhydrides. Vea Menos | |
| EPOLEAD PB4700 | Daicel (U.S.A.), Inc. | EPOLEAD PB4700 is epoxidized polybutadiene which has both epoxy groups and vinyl groups in the molecules. Flexible and tough coatings are available by combining with the suitable polyamines and acid anhydrides. | |
| Epoxidized Soybean Oil (ESO) | ChemCeed | El aceite de soya epoxidado (ESO) se usa como coplastificante en aplicaciones flexibles de PVC, así como estabilizador secundario para el calor y la luz. Además, el ESO actúa como un removedor de tintas a base de soya, productos químicos de uso agrícola e...Vea Mas El aceite de soya epoxidado (ESO) se usa como coplastificante en aplicaciones flexibles de PVC, así como estabilizador secundario para el calor y la luz. Además, el ESO actúa como un removedor de tintas a base de soya, productos químicos de uso agrícola e insecticidas. ESO puede usarse como agente de dispersión de pigmentos, intermediario químico y en lubricantes y aceites de corte. Vea Menos | |
| L911P Plasticizer | ChemCeed | Linear 911P es un plastificante usado cuando se requiere flexibilidad a baja temperatura o para aplicaciones de terminación específica, las cuales exigen un procesamiento único donde los requisitos de rendimiento no pueden cumplir con los plastificantes r...Vea Mas Linear 911P es un plastificante usado cuando se requiere flexibilidad a baja temperatura o para aplicaciones de terminación específica, las cuales exigen un procesamiento único donde los requisitos de rendimiento no pueden cumplir con los plastificantes ramificados. 911P es especialmente útil en los revestimientos antiniebla, selladores de automóviles y lustre de zapatos. Vea Menos | |
| PLACCEL 205 | Daicel (U.S.A.), Inc. | PLACCEL 205 is polycaprolactone diol and its molecular weight is 530. Since it is produced from diol and epsilon-caprolactone by ring opening polymerization reaction, control of hydroxyl group value is exact. In addition, there is no variation in quality....Vea Mas PLACCEL 205 is polycaprolactone diol and its molecular weight is 530. Since it is produced from diol and epsilon-caprolactone by ring opening polymerization reaction, control of hydroxyl group value is exact. In addition, there is no variation in quality. PLACCEL 205 can be used as modifying agent for polyurethane, paint resin, and epoxy resin. Especially, polyurethane made from PLACCEL 205 has high capacity for heat resistance, cold resistance, oil resistance, and abrasion resistance. Vea Menos | |
| PLACCEL 205C | Daicel (U.S.A.), Inc. | PLACCEL 205C is polycaprolactone diol and its molecular weight is 530. Since it is manufactured from diol and epsilon-caprolactone by ring opening polymerization, control of hydroxyl group value is exact. In addition, there is no variation in quality. PL...Vea Mas PLACCEL 205C is polycaprolactone diol and its molecular weight is 530. Since it is manufactured from diol and epsilon-caprolactone by ring opening polymerization, control of hydroxyl group value is exact. In addition, there is no variation in quality. PLACCEL 205C can be used as modifying agent for polyurethane, paint resin, and epoxy resin. Especially, polyurethane made from PLACCEL 205C has high capacity for heat resistance, cold resistance, oil resistance, and abrasion resistance. Vea Menos | |
| PLACCEL 205K | Daicel (U.S.A.), Inc. | PLACCEL 205K is polycaplolactone diol and its molecular weight is 550. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to human he...Vea Mas PLACCEL 205K is polycaplolactone diol and its molecular weight is 550. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to human health and environment in recent years. Even if with a non-tin catalyst, polycaprolactonepolyols can be successfully obtained with quality equivalent to the case which tin catalyst is used. Vea Menos | |
| PLACCEL 205U | Daicel (U.S.A.), Inc. | PLACCEL 205U is polycaprolactone diol and its molecular weight is 530. It is characterized by its narrow molecular weight distribution and low acid value. In addition, PLACCEL 205U is liquid-state oligomer. Urethane acrylates made from PLACCEL 205U show ...Vea Mas PLACCEL 205U is polycaprolactone diol and its molecular weight is 530. It is characterized by its narrow molecular weight distribution and low acid value. In addition, PLACCEL 205U is liquid-state oligomer. Urethane acrylates made from PLACCEL 205U show low viscosity and low crystallinity. Therefore, these are used for various base materials such as UV coating, UV binder, UV adhesive, and UV ink etc., and also give these materials high flexibility and good hydrolysis resistance Vea Menos | |
| PLACCEL 205UC | Daicel (U.S.A.), Inc. | PLACCEL 205UC was developed for synthesizing urethane acrylate oligomers. PLACCEL 205UC is characterized for its narrow molecular weight distribution and its low acid value. Urethane acrylates made from PLACCEL 205UC show low viscosity and low crystalline...Vea Mas PLACCEL 205UC was developed for synthesizing urethane acrylate oligomers. PLACCEL 205UC is characterized for its narrow molecular weight distribution and its low acid value. Urethane acrylates made from PLACCEL 205UC show low viscosity and low crystalline when compared to adipate polyesters. And the coat which be curing by ultraviolet(UV) or electron beam(EB) shows high flexibility, good hydrolysis resistance and weathering resistance. The recommended applications of these urethane acrylate oligomers are UV coating, UV binder, and UV adhesives, UV ink, etc. to various base materials. Vea Menos | |
| PLACCEL 208 | Daicel (U.S.A.), Inc. | PLACCEL 208 is general purpose type polycaplolactone diol and its molecular weight is 830. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols....Vea Mas PLACCEL 208 is general purpose type polycaplolactone diol and its molecular weight is 830. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. PLACCEL 208 can be used as modifying agents, such as polyurethane, paint resin, and epoxy resin. Especially, the polyurethane of 208 bases is excellent in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics, and it can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. Vea Menos | |
| PLACCEL 210 | Daicel (U.S.A.), Inc. | PLACCEL 210 is general-purpose type polycaplolactone diol which is the molecular weight 1000. Since it is manufactured by the ring-opening-polymerization reaction of the diol with epsilon-caprolactone, control of hydroxyl group value is exact and there is...Vea Mas PLACCEL 210 is general-purpose type polycaplolactone diol which is the molecular weight 1000. Since it is manufactured by the ring-opening-polymerization reaction of the diol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 210 can be used as modifying agents, such as polyurethane, paint resin, and epoxy resin. Especially, the polyurethane of 210 bases is excellent in durability, hydrolysis resistance, oil resistance, heat resistance and low-temperature characteristics, and it can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. Vea Menos | |
| PLACCEL 210CP | Daicel (U.S.A.), Inc. | PLACCEL 210CP is characterized for its low crystallization. In addition, it is more narrow molecular weight distribution than PLACCEL 210 which is general-purpose type. The recommended applications of these polyurethane made from PLACCEL 210CP are elastom...Vea Mas PLACCEL 210CP is characterized for its low crystallization. In addition, it is more narrow molecular weight distribution than PLACCEL 210 which is general-purpose type. The recommended applications of these polyurethane made from PLACCEL 210CP are elastomer, synthetic/artificial leather, adhesive, binder and spandex. Polyurethane elastomers made from PLACCEL 210CP show good compression set, elastic recovery and hydrolysis resistance. Vea Menos | |
| PLACCEL 210N | Daicel (U.S.A.), Inc. | PLACCEL 210N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 210N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elas...Vea Mas PLACCEL 210N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 210N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit, the so-called “blooming” is not likely to occur. Vea Menos | |
| PLACCEL 212 | Daicel (U.S.A.), Inc. | PLACCEL 212 is a general purpose type polycaprolactone diol and its molecular weight is 1250. Polycaprolactone diols have better properties of UV resistance and heat resistance than polyether diols. In addition, they also have better property of hydrolysi...Vea Mas PLACCEL 212 is a general purpose type polycaprolactone diol and its molecular weight is 1250. Polycaprolactone diols have better properties of UV resistance and heat resistance than polyether diols. In addition, they also have better property of hydrolysis resistance than adipate based polyester diols. PLACCEL 212 can be used as a modifying agent, such as polyurethane, paint resin, and epoxy resin. Especially, polyurethane made from PLACCEL 212 shows excellent properties in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics and can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. Vea Menos | |
| PLACCEL 212CP | Daicel (U.S.A.), Inc. | PLACCEL 212CP is polycaprolactone diol and its molecular weight is 1250. Polycaprolactone diols have better properties of UV resistance and heat resistance than polyether diols. In addition, they also have better property of hydrolysis resistance than adi...Vea Mas PLACCEL 212CP is polycaprolactone diol and its molecular weight is 1250. Polycaprolactone diols have better properties of UV resistance and heat resistance than polyether diols. In addition, they also have better property of hydrolysis resistance than adipate based polyester diols. PLACCEL 212CP can be used as a modifying agent, such as polyurethane, paint resin, and epoxy resin. Especially, polyurethane made from PLACCEL 212CP shows excellent properties in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics and can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. Vea Menos | |
| PLACCEL 220 | Daicel (U.S.A.), Inc. | PLACCEL 220 is general purpose type polycaprolactone diol and its molecular weight is 2000. The properties of polycaprolactone diols for UV resistance and heat resistance is better than polyether diols. In addition, polycaprolactone diols also have better...Vea Mas PLACCEL 220 is general purpose type polycaprolactone diol and its molecular weight is 2000. The properties of polycaprolactone diols for UV resistance and heat resistance is better than polyether diols. In addition, polycaprolactone diols also have better property for hydrolysis resistance than adipate based polyester diols. PLACCEL 220 can be used as modifying agents for polyurethane, paint resin, and epoxy resin. Especially, polyurethane made from PLACCEL 220 has excellent properties in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics and can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. Vea Menos | |
| PLACCEL 220CPB | Daicel (U.S.A.), Inc. | PLACCEL 220CPB is a polycaprolactone diol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible. The recommended applications of the polyure...Vea Mas PLACCEL 220CPB is a polycaprolactone diol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible. The recommended applications of the polyurethane made from PLACCEL 220CPB are elastomer, synthetic/artificial leather, adhesive, binder and spandex. Polyurethane elastomers made from PLACCEL 220CPB has good property of compression set resistance because of its narrow molecule weight distribution. PLACCEL 220CPB can improve hydrolytic stability and elastic recovery by its low acid value and chemical structure. Vea Menos | |
| PLACCEL 220CPK | Daicel (U.S.A.), Inc. | PLACCEL 220CPK is polycaplolactone diol and its molecular weight is 2000. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to a hum...Vea Mas PLACCEL 220CPK is polycaplolactone diol and its molecular weight is 2000. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to a human health and environment in recent years. Even if we use non-tin catalyst, we succeeded in obtaining polycaprolactonepolyols with quality equivalent to the case which tin catalyst is used. Vea Menos | |
| PLACCEL 220CPT | Daicel (U.S.A.), Inc. | PLACCEL 220CPT is a polycaprolactone diol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, control of hydroxyl group value is exact. The recommended applications of the polyurethane mad...Vea Mas PLACCEL 220CPT is a polycaprolactone diol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, control of hydroxyl group value is exact. The recommended applications of the polyurethane made from PLACCEL 220CPT are elastomer, synthetic/artificial leather, adhesive, binder and spandex. Polyurethane elastomers made from PLACCEL 220CPT show good compression set because of its narrow molecule weight distribution. PLACCEL 220CPT can improve hydrolytic stability and elastic recovery by its controlled low acid value and chemical structure. Vea Menos | |
| PLACCEL 220EB | Daicel (U.S.A.), Inc. | PLACCEL 220EB is adipate-based polyester diol and its molecular weight is 2000. PLACCEL 220EB is liquid-type polyester diol and easy to handle. In addition, PLACCEL 220EB is characterized by its good hydrolytic stability, adhesion to metal and shock absor...Vea Mas PLACCEL 220EB is adipate-based polyester diol and its molecular weight is 2000. PLACCEL 220EB is liquid-type polyester diol and easy to handle. In addition, PLACCEL 220EB is characterized by its good hydrolytic stability, adhesion to metal and shock absorption. PLACCEL 220EB can be used as modifying agent for polyurethane, such as urethane adhesive, coating, gravure ink binder and polyurethane elastomer and so on. Vea Menos | |
| PLACCEL 220EC | Daicel (U.S.A.), Inc. | PLACCEL 220EC is a polyester diol copolymerized with polycarbonate. Its molecular weight is 2000. It is liquid, easy to handle, has excellent mechanical properties such as good elastic recovery, and shows excellent hydrolytic stability. This product is su...Vea Mas PLACCEL 220EC is a polyester diol copolymerized with polycarbonate. Its molecular weight is 2000. It is liquid, easy to handle, has excellent mechanical properties such as good elastic recovery, and shows excellent hydrolytic stability. This product is suitable for urethane adhesives, gravure ink binders, polyurethane elastomers, and plastizers for paints and epoxy-resins. Vea Menos | |
| PLACCEL 220N | Daicel (U.S.A.), Inc. | PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLAC...Vea Mas PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLACCEL 220N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 220N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit, the so-called “blooming” is not likely to occur. Vea Menos | |
| PLACCEL 220UA | Daicel (U.S.A.), Inc. | PLACCEL 220UA is polycaprolactone diol and its molecular weight is 2000. In particular, it is characterized by its higher meltability than other PLACCEL 220 series. PLACCEL 220UA is mainly used as modifying agent for polyurethane, such as urethane adhesiv...Vea Mas PLACCEL 220UA is polycaprolactone diol and its molecular weight is 2000. In particular, it is characterized by its higher meltability than other PLACCEL 220 series. PLACCEL 220UA is mainly used as modifying agent for polyurethane, such as urethane adhesive, urethane binder and urethane elastomer. Especially, polyurethane made from PLACCEL 220UA has excellent properties in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics. Vea Menos | |
| PLACCEL 230 | Daicel (U.S.A.), Inc. | PLACCEL 230 is general purpose type polycaprolactone diol and its molecular weight is 3000. Since it is manufactured by the ring opening polymerization of epsilon- caprolactone, exact control of hydroxyl group value is possible and there is no variation i...Vea Mas PLACCEL 230 is general purpose type polycaprolactone diol and its molecular weight is 3000. Since it is manufactured by the ring opening polymerization of epsilon- caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 230 can mainly be used as modifying agent for polyurethane. Especially, polyurethane made from PLACCEL 230 has excellent properties in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics and it can be used for applications as urethane adhesive, urethane binder and so on. Vea Menos | |
| PLACCEL 230N | Daicel (U.S.A.), Inc. | PLACCEL 230N is polycaprolactone diol and its molecular weight is 3000. In particular, PLACCEL 230N is characterized by its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 230N have excellent properties of abrasion resistan...Vea Mas PLACCEL 230N is polycaprolactone diol and its molecular weight is 3000. In particular, PLACCEL 230N is characterized by its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 230N have excellent properties of abrasion resistance and compression permanent set resistance. Application of the polyurethane elastomers to solid tires, rollers and scratching blades of toner in copy machines are preferable because the so-called “blooming” is not likely to occur. Vea Menos | |
| PLACCEL 240 | Daicel (U.S.A.), Inc. | PLACCEL 240 is general purpose type polycaprolactone diol and its molecular weight is 4000. Since it is manufactured by the ring opening polymerization of epsilon- caprolactone, exact control of hydroxyl group value is possible and there is no variation i...Vea Mas PLACCEL 240 is general purpose type polycaprolactone diol and its molecular weight is 4000. Since it is manufactured by the ring opening polymerization of epsilon- caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 240 can mainly be used as modifying agent for polyurethane. Especially, polyurethane made from PLACCEL 240 has excellent properties in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics and it can be applied to urethane adhesive and so on. Vea Menos | |
| PLACCEL 303 | Daicel (U.S.A.), Inc. | PLACCEL 303 is a polycaplolactone triol and its molecular weight is 310. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL ...Vea Mas PLACCEL 303 is a polycaplolactone triol and its molecular weight is 310. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 303 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. Vea Menos | |
| PLACCEL 305 | Daicel (U.S.A.), Inc. | PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quali...Vea Mas PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 305. Vea Menos | |
| PLACCEL 305T | Daicel (U.S.A.), Inc. | PLACCEL 305T is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon- caprolactone, control of hydroxyl group value is exact and there is no variation in qua...Vea Mas PLACCEL 305T is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon- caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305T is raw material of CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. In addition, it can improve hydrolytic stability than using PLACCEL 305 by its controlled low acid value. Vea Menos | |
| PLACCEL 308 | Daicel (U.S.A.), Inc. | PLACCEL 308 is a polycaplolactone triol and its molecular weight is 850. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL ...Vea Mas PLACCEL 308 is a polycaplolactone triol and its molecular weight is 850. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 305 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. Vea Menos | |
| PLACCEL 309 | Daicel (U.S.A.), Inc. | PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quali...Vea Mas PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 309 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 309. Vea Menos | |
| PLACCEL 312 | Daicel (U.S.A.), Inc. | PLACCEL 312 is a polycaplolactone triol and its molecular weight is 1250. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL...Vea Mas PLACCEL 312 is a polycaplolactone triol and its molecular weight is 1250. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 312 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. Vea Menos | |
| PLACCEL 320 | Daicel (U.S.A.), Inc. | PLACCEL 320 is a polycaplolactone triol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL...Vea Mas PLACCEL 320 is a polycaplolactone triol and its molecular weight is 2000. Since it is manufactured by the ring opening polymerization of epsilon-caprolactone, exact control of hydroxyl group value is possible and there is no variation in quality. PLACCEL 320 is a raw material for CASE (Coating, Adhesion, Sealant, Elastomer). It can be used as modifying agents or cross linking agent for polyurethane, paint resin, epoxy resin and so on. Vea Menos | |
| PLACCEL 410 | Daicel (U.S.A.), Inc. | PLACCEL 410 is a polycaprolactone-tetraol which has four primary hydroxyl groups. It can be used as a urethane resin cross-linking agent and raw material for coatings. It can form advanced bridge structure, as well as maintain flexibility. | |
| PLACCEL CD205PL | Daicel (U.S.A.), Inc. | PLACCEL CD205PL is a polycarbonate diol and its molecular weight is 550. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and ...Vea Mas PLACCEL CD205PL is a polycarbonate diol and its molecular weight is 550. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and so on. Polyurethanes made with polycarbonate polyols show high resistance against deterioration by heat, hydrolysis, and weather. The level of the resistance is unattainable by the other polyols such as polyester polyols, polyether polyols. Vea Menos | |
| PLACCEL CD210 | Daicel (U.S.A.), Inc. | PLACCEL CD210 is a polycarbonate diol and its molecular weight is 1000. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and s...Vea Mas PLACCEL CD210 is a polycarbonate diol and its molecular weight is 1000. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and so on. Polyurethanes made with polycarbonate polyols show high resistance against deterioration by heat, hydrolysis, and weather. The level of the resistance is unattainable by the other polyols such as polyester polyols, polyether polyols, and polytetramethyleneether polyols. Vea Menos | |
| PLACCEL CD220 | Daicel (U.S.A.), Inc. | PLACCEL CD220 is a polycarbonate diol and its molecular weight is 2000. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and s...Vea Mas PLACCEL CD220 is a polycarbonate diol and its molecular weight is 2000. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and so on. Polyurethanes made with polycarbonate polyols show high resistance against deterioration by heat, hydrolysis, and weather. The level of the resistance is unattainable by the other polyols such as polyester polyols, polyether polyols, and polytetramethyleneether polyols. Vea Menos | |
| PLACCEL CD220PL | Daicel (U.S.A.), Inc. | PLACCEL CD220PL is a polycarbonate diol and its molecular weight is 2000. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and...Vea Mas PLACCEL CD220PL is a polycarbonate diol and its molecular weight is 2000. It was developed for important building blocks of polyurethanes having wide applications such as synthetic rubbers, fibers, adhesives, paints, artificial leathers, tape binders, and so on. Polyurethanes made with polycarbonate polyols show high resistance against deterioration by heat, hydrolysis, and weather. The level of the resistance is unattainable by the other polyols such as polyester polyols, polyether polyols. Vea Menos | |
| PLACCEL FA1DDM | Daicel (U.S.A.), Inc. | PLACCEL FA1DDM is macromonomer having an acrylic double bond and a primary hydroxyl group. Copolymerization with PLACCEL FA1DDM introduces primary hydroxyl groups in the acrylpolyol resin. These hydroxyl groups are dangling from acrylpolyol main chain, an...Vea Mas PLACCEL FA1DDM is macromonomer having an acrylic double bond and a primary hydroxyl group. Copolymerization with PLACCEL FA1DDM introduces primary hydroxyl groups in the acrylpolyol resin. These hydroxyl groups are dangling from acrylpolyol main chain, and they can easily react with melamine or other hardening agents such as polyisocyanate, to form crosslinking. This results in elastic and tough coating films. Vea Menos | |
| PLACCEL FA2D | Daicel (U.S.A.), Inc. | PLACCEL FA2D is macro monomer with an acrylic double bond and a primary hydroxyl group used as the modifying agent for acrylic resins. It’s especially used as the material of urethane-acrylates giving the ability to reduce crystallinity and viscosity. The...Vea Mas PLACCEL FA2D is macro monomer with an acrylic double bond and a primary hydroxyl group used as the modifying agent for acrylic resins. It’s especially used as the material of urethane-acrylates giving the ability to reduce crystallinity and viscosity. Therefore, urethane-acrylates made from PLACCEL FA2D show higher flexibility. This results in strong and flexible coating films. Vea Menos | |
| PLACCEL FA2K | Daicel (U.S.A.), Inc. | PLACCEL FA2K is macro monomer with an acrylic double bond and a primary hydroxyl group used as the modifying agent for acrylic resins. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catal...Vea Mas PLACCEL FA2K is macro monomer with an acrylic double bond and a primary hydroxyl group used as the modifying agent for acrylic resins. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to a human health and environment in recent years. Even if we use non-tin catalyst, we succeeded in obtaining polycaprolactonepolyols with quality equivalent to the case which tin catalyst is used. Vea Menos | |
| PLACCEL FM1D | Daicel (U.S.A.), Inc. | PLACCEL FM1D is macro monomer with a methacrylic double bond and a primary hydroxyl group. Primary hydroxyl groups in the acrylpolyol resin are composed by a copolymerization of the PLACCEL FM series. These are located at the end of a flexible polycaprola...Vea Mas PLACCEL FM1D is macro monomer with a methacrylic double bond and a primary hydroxyl group. Primary hydroxyl groups in the acrylpolyol resin are composed by a copolymerization of the PLACCEL FM series. These are located at the end of a flexible polycaprolactone chain and far from the main chain of structure. Consequently, the resins can be easily reacted with melamine or other hardening agent such as polyisocyanate to complete crosslinking. This results in elastic and strong coating films. Vea Menos | |
| PLACCEL FM2D | Daicel (U.S.A.), Inc. | PLACCEL FM2D is macro monomer with a methacrylic double bond and a primary hydroxyl group. Primary hydroxyl groups in the acrylpolyol resin are composed by a copolymerization of the PLACCEL FM series. These are located at the end of a flexible polycaprola...Vea Mas PLACCEL FM2D is macro monomer with a methacrylic double bond and a primary hydroxyl group. Primary hydroxyl groups in the acrylpolyol resin are composed by a copolymerization of the PLACCEL FM series. These are located at the end of a flexible polycaprolactone chain and far from the main chain of structure. Consequently, the resins can be easily reacted with melamine or other hardening agent such as polyisocyanate to complete crosslinking. This results in elastic and strong coating films. Vea Menos | |
| PLACCEL FM3 | Daicel (U.S.A.), Inc. | PLACCEL FM3 is macromonomer having a methacrylic double bond and a primary hydroxyl group. Copolymerization with PLACCEL FM3 introduces primary hydroxyl groups in the acrylpolyol resin. These hydroxyl groups are dangling from acrylpolyol main chain via fl...Vea Mas PLACCEL FM3 is macromonomer having a methacrylic double bond and a primary hydroxyl group. Copolymerization with PLACCEL FM3 introduces primary hydroxyl groups in the acrylpolyol resin. These hydroxyl groups are dangling from acrylpolyol main chain via flexible polycaprolactone chain. Hence they can easily react with melamine or other hardening agents such as polyisocyanate to form crosslinking. This results in elastic and tough coating films. Vea Menos | |
| PLACCEL FM5 | Daicel (U.S.A.), Inc. | PLACCEL FM5 is macromonomer having a methacrylic double bond and a primary hydroxyl group. Copolymerization with PLACCEL FM5 introduces primary hydroxyl groups in the acrylpolyol resin. These hydroxyl groups are dangling from acrylpolyol main chain via fl...Vea Mas PLACCEL FM5 is macromonomer having a methacrylic double bond and a primary hydroxyl group. Copolymerization with PLACCEL FM5 introduces primary hydroxyl groups in the acrylpolyol resin. These hydroxyl groups are dangling from acrylpolyol main chain via flexible polycaprolactone chain. Hence they can easily react with melamine or other hardening agents such as polyisocyanate to form crosslinking. This results in elastic and tough coating films. Vea Menos | |
| PLACCEL H1P | Daicel (U.S.A.), Inc. | PLACCEL H1P is polycaprolactone diol and its molecular weight is 10000. PLACCEL H1P is thermoplastic resin and easy to transform into any shape under more than 60℃, because the melting point of this product is lower than other plastics. In addition, PLACC...Vea Mas PLACCEL H1P is polycaprolactone diol and its molecular weight is 10000. PLACCEL H1P is thermoplastic resin and easy to transform into any shape under more than 60℃, because the melting point of this product is lower than other plastics. In addition, PLACCEL H1P is ecological plastic because of its biodegradability. PLACCEL H1P can be processed by extrusion or injection molding machines into polymeric films, polymeric sheets, fibers and so on. Vea Menos | |
| PLACCEL L205AL | Daicel (U.S.A.), Inc. | PLACCEL L205AL is a liquid type polycaprolactone polyol and its molecular weight is 500. It is an amorphous and viscous liquid, easier to handle than the other waxy ones. By using PLACCEL L205AL, we can make a polyurethane with excellent mechanical proper...Vea Mas PLACCEL L205AL is a liquid type polycaprolactone polyol and its molecular weight is 500. It is an amorphous and viscous liquid, easier to handle than the other waxy ones. By using PLACCEL L205AL, we can make a polyurethane with excellent mechanical properties such as good elastic recovery. This product has a wide range of applications as urethane adhesive, urethane binder for graver ink, polyurethane elastomer or plasticizer for paint and epoxy-resin. Vea Menos | |
| PLACCEL L212AL | Daicel (U.S.A.), Inc. | PLACCEL L212AL is a liquid type polycaprolactone diol and its molecular weight is 1250. It is an amorphous and viscous liquid, easier to handle than the other waxy ones. By using PLACCEL L212AL, we can make a polyurethane with excellent mechanical propert...Vea Mas PLACCEL L212AL is a liquid type polycaprolactone diol and its molecular weight is 1250. It is an amorphous and viscous liquid, easier to handle than the other waxy ones. By using PLACCEL L212AL, we can make a polyurethane with excellent mechanical properties such as good elastic recovery. This product has a wide range of applications as urethane adhesive, urethane binder for graver ink, polyurethane elastomer or plasticizer for paint and epoxy-resin. Vea Menos | |
| PLACCEL L220AL | Daicel (U.S.A.), Inc. | PLACCEL L220AL is a liquid type polycaprolactone diol and its molecular weight is 2000. It is an amorphous and viscous liquid, easier to handle than the other waxy ones. By using PLACCEL L220AL, we can make a polyurethane with excellent mechanical propert...Vea Mas PLACCEL L220AL is a liquid type polycaprolactone diol and its molecular weight is 2000. It is an amorphous and viscous liquid, easier to handle than the other waxy ones. By using PLACCEL L220AL, we can make a polyurethane with excellent mechanical properties such as good elastic recovery. This product has a wide range of applications as urethane adhesive, urethane binder for graver ink, polyurethane elastomer or plasticizer for paint and epoxy-resin. Vea Menos | |
| PLACCEL L320AL | Daicel (U.S.A.), Inc. | PLACCEL L320AL is a liquid polycaprolactone-triol. Ordinary polycaprolactone-polyols of high molecular weight are a waxy substance with high crystalline material. PLACCEL L320AL is a part of a series that are amorphous and viscous liquid of polycaprolacto...Vea Mas PLACCEL L320AL is a liquid polycaprolactone-triol. Ordinary polycaprolactone-polyols of high molecular weight are a waxy substance with high crystalline material. PLACCEL L320AL is a part of a series that are amorphous and viscous liquid of polycaprolactone-polyols. This liquid polycaprolactone-polyols are easier to handle than the other waxy ones. Besides, we can make a polyurethane which has an excellent mechanical property such as good elastic recovery by using the liquid polycaprolactone-polyols. Consequently, PLACCEL L series have a wide range of applications which are urethane adhesive, urethane binder for graver ink, polyurethane elastomer and plasticizer for paint and epoxy-resin. Vea Menos | |
| PLACCEL M | Daicel (U.S.A.), Inc. | PLACCEL M is 7 membered-lactone (epsilon-caprolactone) and is mainly used as monomer for ring-opening polymerization with polyols to manufacture polycaprolactone. With its excellent chemical reactivity, various kinds of resins and organic compounds can be...Vea Mas PLACCEL M is 7 membered-lactone (epsilon-caprolactone) and is mainly used as monomer for ring-opening polymerization with polyols to manufacture polycaprolactone. With its excellent chemical reactivity, various kinds of resins and organic compounds can be modified by PLACCEL M to improve compatibility, solubility, flexibility and reactivity. Vea Menos | |
| PLACCEL P3403 | Daicel (U.S.A.), Inc. | PLACCEL P3403 is polyetherester triol and its molecular weight is 4000. It is manufactured from PPG triol and epsilon-caprolactone by ring-opening polymerization. This product is characterized by its high urethane reactivity because secondary hydroxyl gro...Vea Mas PLACCEL P3403 is polyetherester triol and its molecular weight is 4000. It is manufactured from PPG triol and epsilon-caprolactone by ring-opening polymerization. This product is characterized by its high urethane reactivity because secondary hydroxyl group in PPG is modified by epsilon-caprolactone to make terminal primary hydroxyl group. PLACCEL P3403 can be used as modifying agent for polyurethane, such as urethane adhesive, elastomer, sealant, and artificial leather and so on. Vea Menos | |
| PLACCEL T2205 | Daicel (U.S.A.), Inc. | PLACCEL T2205 is polyetherester diol and its molecular weight is 2000. It is manufactured from PTMG and epsilon-caprolactone by ring-opening polymerization. This product is characterized by its excellent properties at low temperature, good compression per...Vea Mas PLACCEL T2205 is polyetherester diol and its molecular weight is 2000. It is manufactured from PTMG and epsilon-caprolactone by ring-opening polymerization. This product is characterized by its excellent properties at low temperature, good compression permanent and durability. PLACCEL T2205 can be used as modifying agent for polyurethane, such as polyurethane elastomer. Vea Menos | |
| Tetrahydrofuran | ChemCeed | El tetrahidrofurano (THF) es un disolvente versátil, altamente polar, que se utiliza en la fabricación de adhesivos, celofanes, elastómeros, tintas, productos farmacéuticos, revestimientos de poliuretano, cemento para PVC y películas de vinilo. El THF se ...Vea Mas El tetrahidrofurano (THF) es un disolvente versátil, altamente polar, que se utiliza en la fabricación de adhesivos, celofanes, elastómeros, tintas, productos farmacéuticos, revestimientos de poliuretano, cemento para PVC y películas de vinilo. El THF se usa como precursor de numerosos polímeros o síntesis químicas. Vea Menos | |
| Titanium Dioxide (TiO2) - Rutile | ChemCeed | El dióxido de titanio es un pigmento blanco que se usa para brindar blanqueamiento y opacidad a productos tales como pinturas, revestimientos, plásticos, papeles y tintas. | |
| Tolyltriazole | ChemCeed | El toliltriazol es un inhibidor de corrosión para cobre y aleaciones de cobre, y se usa comúnmente en sistemas de enfriamiento de agua. Entre sus aplicaciones adicionales, se incluyen fluidos de metalurgia, lubricantes, descongelante para pistas y líquido...Vea Mas El toliltriazol es un inhibidor de corrosión para cobre y aleaciones de cobre, y se usa comúnmente en sistemas de enfriamiento de agua. Entre sus aplicaciones adicionales, se incluyen fluidos de metalurgia, lubricantes, descongelante para pistas y líquido de frenos. Vea Menos | |
| Trioctyl Trimellitate (TOTM) | ChemCeed | El trioctil trimelitato (TOTM) es un plastificante no ftalato que es útil para los adhesivos y epoxis. Es compatible con cauchos clorados, epiclorhidrina, nitrilo hidrogenado, caucho hidrogenado, policloropreno y cloruro de polivinilo. |
