| Epotec® YDFM 253 | Aditya Birla | Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface tension. This product is ideal for use in high solids...Vea Mas Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface tension. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. Vea Menos | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...Vea Mas 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. Vea Menos | |
| LAROMER® PO 8982 | BASF Dispersions & Resins | Laromer® PO 8982 is a polyether-modified acrylic resin. It can be diluted with up to 25% water without the development of clouds. This covers a broad viscosity range and allows formulations for roller or spray applications. Combined with energy curable emulsions such as Laromer® PE 22 WN or Laromer® PE 55 WN, high solids...Vea Mas Laromer® PO 8982 is a polyether-modified acrylic resin. It can be diluted with up to 25% water without the development of clouds. This covers a broad viscosity range and allows formulations for roller or spray applications. Combined with energy curable emulsions such as Laromer® PE 22 WN or Laromer® PE 55 WN, high solids adhesive primers for parquet flooring can be formulated. Vea Menos | |
| SETAL® 21-3610 | Allnex | SETAL® 21-3610 is a long oil, oxidizing alkyd resin used in exterior deck and other penetrating wood stains. It features ultra-high solids, excellent penetration, and ages by erosive wear rather than by flaking. This traditional solvent-borne alkyd is ca...Vea Mas SETAL® 21-3610 is a long oil, oxidizing alkyd resin used in exterior deck and other penetrating wood stains. It features ultra-high solids, excellent penetration, and ages by erosive wear rather than by flaking. This traditional solvent-borne alkyd is capable of achieving low formulated VOC's of 250 g/L or 100 g/L (with exempt solvents) while outperforming higher VOC competitors. Vea Menos | Request Sample |
| Siltech® C-101 | Siltech Corp. | Siltech® C-101 is a water-soluble silicone glycol copolymer with carbinol functionality. Its primary uses are to reduce surface tension, enhancing flow-out, leveling and wetting. Siltech® C-101 can be added into water-based, solvent based, high solids and...Vea Mas Siltech® C-101 is a water-soluble silicone glycol copolymer with carbinol functionality. Its primary uses are to reduce surface tension, enhancing flow-out, leveling and wetting. Siltech® C-101 can be added into water-based, solvent based, high solids and solventless organic paints, inks and coatings. It reduces surface tension, improves wetting, flow-out, mar resistance, leveling, gloss and prevents blocking. Vea Menos | |
| Resiflow® L5 | Estron Chemical, Inc. | Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...Vea Mas Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. Vea Menos | |
| JONCRYL® 935 | BASF Dispersions & Resins | Joncryl® 935 is a high performance polyol for polyurethane coatings suitable for automotive refinish and industrial applications. It offers excellent exterior durability with good chemical resistance and is available in PCBTF as Joncryl® 939. | |
| CYMEL® 1130 | Allnex | Un agente de reticulación metilado, butilado de melamina-formaldehído, con un alto grado de alquilación, un contenido de metilol bajo y baja funcionalidad de imino. | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids...Vea Mas HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. Vea Menos | Request Sample |
| MACRYNAL® SM 2727/70X | Allnex | MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fa...Vea Mas MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fast drying systems with high hardness. The principal application area is industrial coatings, in particular primers and topcoats. Such paints display a low content of volatile organic compounds (VOC). Vea Menos | Request Sample |
| VINAVIL® 2433 | VINAVIL Americas Corp. | VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and work...Vea Mas VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and works best with non-polar surfaces such as polypropylene or polyethylene. This product can be used both for permanent and temporary labeling applications. Vea Menos | |
| K-STAY® 501 | King Industries, Inc. | K-STAY® 501 is a metal sulfonate rheology control agent that prevents or decreases sag in conventional and high solids thermoset coatings. K-STAY® 501 can also be used to enhance the sag resistance of many other types of coatings, such as air dry alkyds,...Vea Mas K-STAY® 501 is a metal sulfonate rheology control agent that prevents or decreases sag in conventional and high solids thermoset coatings. K-STAY® 501 can also be used to enhance the sag resistance of many other types of coatings, such as air dry alkyds, urethanes and epoxies. This product appears as a light brown liquid, can be post added, is 50% active, and can be applied to high gloss coatings. Vea Menos | |
| JONCRYL® 910 | BASF Dispersions & Resins | Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate f...Vea Mas Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry time characteristics for maintenance, transportation, and other applications, at VOC levels as low as 3.2 pounds per gallon without exempt solvents. Vea Menos | |
| RayCryl® 1859 | Specialty Polymers | RayCryl® 1859 is a high solids 100% acrylic emulsion polymer that develops a medium flexible film that can be used for domestic or industrial textile fabric coatings. Is apart of a self crosslinking and carboxyl group. Features a medium flexible free film...Vea Mas RayCryl® 1859 is a high solids 100% acrylic emulsion polymer that develops a medium flexible film that can be used for domestic or industrial textile fabric coatings. Is apart of a self crosslinking and carboxyl group. Features a medium flexible free film, is an excellent foamer, APEO free, can be filled with clay, starch or calcium carbonate, and has outstanding UV resistance and film clarity. Vea Menos | |
| Hycar® FF 26916 | Lubrizol Advanced Materials, Inc. | Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good solvent resistance to saturated substrates. Hycar FF 26916 can also be used in coating applications requiring superior high solids...Vea Mas Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good solvent resistance to saturated substrates. Hycar FF 26916 can also be used in coating applications requiring superior high solids formulation stability and excellent scrub resistance. Vea Menos | |
| EFKA® RM 1469 | BASF Formulation Additives | EFKA® RM 1469 is rheology modifier for solvent based systems. It is particularly recommended in the application of pigment preparations as well as in clear or topcoats which require maximum gloss. It is suitable for a wide range of solvent based synthetic resins like nitrocellulose, 2K PU, CAB, TPA, polyester and melamine. EFKA® RM 1469 can be used in both high solids...Vea Mas EFKA® RM 1469 is rheology modifier for solvent based systems. It is particularly recommended in the application of pigment preparations as well as in clear or topcoats which require maximum gloss. It is suitable for a wide range of solvent based synthetic resins like nitrocellulose, 2K PU, CAB, TPA, polyester and melamine. EFKA® RM 1469 can be used in both high solids and conventional systems. Vea Menos | |
| Epotec® YDFM 250 | Aditya Birla | Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins. This product is ideal for use in solvent-based, high solids...Vea Mas Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. Vea Menos | |
| Versamid® 253 | BASF Corporation, Chemical Intermediates | Versamid® 253 is a low viscosity polyamide resin designed for reactions with liquid or solid epoxy resins. When used with standard epoxy resins, it exhibits the same high quality properties formulators have come to expect from the Versamid® product line. ...Vea Mas Versamid® 253 is a low viscosity polyamide resin designed for reactions with liquid or solid epoxy resins. When used with standard epoxy resins, it exhibits the same high quality properties formulators have come to expect from the Versamid® product line. Versamid® 253 offers high solids capabilities, no necessary induction time, and no bloom or blush in high humidity environments. Versamid® 253 and epoxy resin systems are recommended for applications such as Industrial maintenance coating applications. Vea Menos | |
| Epokukdo YD-119 | Kukdo Chemical Co., Ltd. | Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids...Vea Mas Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. Vea Menos | |
| PLIOWAY® Ultra 350LV | Omnova Solutions | PLIOWAY® Ultra 350LV is a vinyl acrylate copolymer. This newtonian low viscosity resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ultra 350LV form by solvent evaporation, with low internal tension, making them ideal for renovation of old problematic coatings. Typical applications include: high solids...Vea Mas PLIOWAY® Ultra 350LV is a vinyl acrylate copolymer. This newtonian low viscosity resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ultra 350LV form by solvent evaporation, with low internal tension, making them ideal for renovation of old problematic coatings. Typical applications include: high solids odorless primers, intumescent coatings. Vea Menos | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...Vea Mas Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. Vea Menos | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...Vea Mas Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. Vea Menos | |
| VINAVIL® 2841 | VINAVIL Americas Corp. | VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for film...Vea Mas VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for films, double-sided tapes, foams, textiles and labels. It can also be used in floor adhesives and in textile screen printing applications. This product coats well on silicone-coated release paper. Vea Menos | |
| ADDITOL® XL 482 | Allnex | ADDITOL® XL 482 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC...Vea Mas ADDITOL® XL 482 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC coatings as well as sensitive compositions that require specific solvents. It is effective with most resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL XL 482 contains no silicone ingredients. Vea Menos | Request Sample |
| Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...Vea Mas Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. Vea Menos | |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced perfor...Vea Mas HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| CYMEL® U-65 | Allnex | La resina CYMEL® U-65 es una resina de urea metilada, con alto contenido de sólidos, diseñada para usar en sistemas solubles en solventes orgánicos y en agua como agente reticulante para una variedad de polímeros que contienen hidroxil. | Request Sample |
| SETAL® 21-1494 | Allnex | SETAL® 21-1494 is a high solids chain-stopped soybean oil alkyd for use in the manufacture of coatings that must comply with VOC levels 3.5 lbs / gal or lower. Coatings based upon this resin are characterized by fast cure response, high specular gloss, ch...Vea Mas SETAL® 21-1494 is a high solids chain-stopped soybean oil alkyd for use in the manufacture of coatings that must comply with VOC levels 3.5 lbs / gal or lower. Coatings based upon this resin are characterized by fast cure response, high specular gloss, chemical resistance and good color retention. SETAL® 21-1494 reduces rapidly with aromatic or oxygenated solvents to provide low VOC paint requirements. This resin is compatible with otherfilm Vea Menos | Request Sample |
| SETAL® 21-1491 | Allnex | SETAL® 21-1491 is a premium high solids chain-stopped alkyd for use in the manufacture of coatings that must comply with VOC levels of 3.5 lbs / gallon or lower. Coatings based upon this resin are characterized by high specular gloss, very fast dry, good ...Vea Mas SETAL® 21-1491 is a premium high solids chain-stopped alkyd for use in the manufacture of coatings that must comply with VOC levels of 3.5 lbs / gallon or lower. Coatings based upon this resin are characterized by high specular gloss, very fast dry, good color retention, and excellent exterior durability. SETAL® 21-1491 reduces rapidly with aromatic solvents to provide low VOC paint requirements. HAPs free versions of this product areSETAL® 2 Vea Menos | Request Sample |
| FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids...Vea Mas FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. Vea Menos | |
| RHOPLEX 928 | Univar Solutions | RHOPLEX 928 is a high-solids acrylic copolymer emulsion that can be used as a binder for both clear and pigmented sealant formulations. Clear sealants exhibit exceptional clarity, rate of clarity development and water resistance. Pigmented sealants can be...Vea Mas RHOPLEX 928 is a high-solids acrylic copolymer emulsion that can be used as a binder for both clear and pigmented sealant formulations. Clear sealants exhibit exceptional clarity, rate of clarity development and water resistance. Pigmented sealants can be formulated to meet ASTM C834 and to have the paint crack resistance properties painters require. Both clear and pigmented sealants have excellent adhesion to a wide variety of substrates. . Vea Menos | Request Sample |
| TEGO® Flow 375 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's s...Vea Mas TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's surface energy or slip. It is used as the primer/basecoat and as the topcoat for lacquer coats, and is soluble in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA). Vea Menos | Request Sample |
| Epokukdo YD-115E | Kukdo Chemical Co., Ltd. | Epokukdo YD-115E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether (C12-C14). YD-115E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-115E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids...Vea Mas Epokukdo YD-115E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether (C12-C14). YD-115E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-115E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. Vea Menos | |
| Epokukdo YD-114E | Kukdo Chemical Co., Ltd. | Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids...Vea Mas Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coating. Vea Menos | |
| Epokukdo YD-114 | Kukdo Chemical Co., Ltd. | Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids...Vea Mas Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. Vea Menos | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids...Vea Mas NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. Vea Menos | |
| SpaceRite® S-3 Alumina Trihydrate | Huber Engineered Materials | SpaceRite® S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distributions. SpaceRite S-3 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives. SpaceRite S-3 has many uses in architectural coatings and high solids...Vea Mas SpaceRite® S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distributions. SpaceRite S-3 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives. SpaceRite S-3 has many uses in architectural coatings and high solids/low VOC coatings. Vea Menos | |
| Epokukdo YD-114EF | Kukdo Chemical Co., Ltd. | Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids...Vea Mas Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings. Vea Menos | |
| Epokukdo YD-114F | Kukdo Chemical Co., Ltd. | Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids...Vea Mas Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings Vea Menos | |
| Ecodis™ P 50 | Arkema Rheology & Specialty Additives | ECODIS P 50 es un polímero de acrílico diseñado especialmente para una dispersión acuosa de caolín y carbonato de calcio. | Request Sample |
| CYMEL® 202 | Allnex | La resina CYMEL® 202 es un reticulante de melamina de alto contenido de amino, metilado/n-butilado, suministrado en n-butanol. Su naturaleza hidrófoba combinada con una alta reactividad, alto contenido de sólidos, y baja emisión de formaldehído durante el...Vea Mas La resina CYMEL® 202 es un reticulante de melamina de alto contenido de amino, metilado/n-butilado, suministrado en n-butanol. Su naturaleza hidrófoba combinada con una alta reactividad, alto contenido de sólidos, y baja emisión de formaldehído durante el proceso de curado, hace que este producto sea adecuado para una amplia gama de aplicaciones de horneado a base de agua con medio a alto contenido de sólidos, como formulaciones de revestimiento de latas y contenedores, revestimientos de automotrices y sistemas de bajo curado para mejorar la apariencia de la película y las propiedades de resistencia. Tiene una alta tendencia a la autocondensación a temperaturas relativamente bajas de horneado, lo que proporciona películas con muy buena dureza, brillo, resistencia química y durabilidad en exteriores. Vea Menos | Request Sample |
| ECOPOLEDER-D-BASE | Ecopol Tech | ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longe...Vea Mas ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longevity in applications. Adapted to leather impregnation processes, ECOPOLEDER-D-BASE offers exceptional elasticity, contributing to the flexibility and strength of the material. In particular, ECOPOLEDER-D-BASE exhibits exceptional adhesive strength, creating solid bonds with the leather substrate. This dispersion features advanced polymer technology, offering a high solids solution that elevates leather properties in durability, flexibility and handling. Vea Menos | |
| FS-290 Polyamine | Epoxy Chemicals, Inc. | FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener...Vea Mas FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener systems to improve thin film cure. It functions as a curing agent for liquid epoxy resins, and finds application in construction adhesives, solvent free high solids coatings, crack injection resins, accelerate flooring systems, and hardened concrete adhesives. Vea Menos | |
| SETYRENE™ 23-3319 | Allnex | SETYRENE 23-3319 is the low HAPs containing high solids version of SETYRENE 23-3317 styrene acrylic modified copolymer alkyd. This resin possesses the very desirable properties of good set / dry speed with high gloss and good general film performance. Imp...Vea Mas SETYRENE 23-3319 is the low HAPs containing high solids version of SETYRENE 23-3317 styrene acrylic modified copolymer alkyd. This resin possesses the very desirable properties of good set / dry speed with high gloss and good general film performance. Improved flexibility may be attained via modification with Paraplex G-31 at the level of 5 to 7% on resin non-volatile. SETYRENE 23-3319 will allow formulation of 3.5 lb/gal / 420 g/l VOC coatings. Vea Menos | Request Sample |
| DOWSIL™ 100F Additive | Univar Solutions | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...Vea Mas Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. Vea Menos | Request Sample |
| DOWSIL™ 100F Additive | Dow Performance Silicones | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...Vea Mas Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. Vea Menos | |
| Polychem 7517-M-75 | OPC Polymers | Polychem 7517-M-75 is a clear to slightly hazy, high solids medium TOFA oil low-HAP alkyd in a low aromatic mineral spirits solvent. It can be used in brush enamels or spray or dip primers used in air dry or forced dry systems. HAP free (below 1% HAP) coa...Vea Mas Polychem 7517-M-75 is a clear to slightly hazy, high solids medium TOFA oil low-HAP alkyd in a low aromatic mineral spirits solvent. It can be used in brush enamels or spray or dip primers used in air dry or forced dry systems. HAP free (below 1% HAP) coatings and brush enamels and primers with a VOC level of 340-400 grams per liter can be formulated with this product. Vea Menos | |
| SETAL® 21-3469 | Allnex | SETAL 21-3469 is a flexible high-solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhe...Vea Mas SETAL 21-3469 is a flexible high-solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhesion over chalky substrates. SETAL 21-3469 also improves brushing qualities of medium and long oil based house paints. SETAL 21-3469 is a HAPS-free version of SETAL 21-3461. Vea Menos | Request Sample |
| NACURE® 2107 | King Industries, Inc. | NACURE® 2107 appears as a clear, straw liquid and is an amine counterbalanced para-Toluenesulfonic (p-TSA) stimulant that is made for fast cure response. It improves metal scratch resistance of acid catalyzed formulations and offers waterborne or high sol...Vea Mas NACURE® 2107 appears as a clear, straw liquid and is an amine counterbalanced para-Toluenesulfonic (p-TSA) stimulant that is made for fast cure response. It improves metal scratch resistance of acid catalyzed formulations and offers waterborne or high solids coatings. This product can be applied to general industrials, appliance finishes, and coil coatings. It is soluble in alcohols, ethers, water, and glycols, partially soluble in ketones and aromatic hydrocarbons, and insoluble in aliphatic hydrocarbons. Vea Menos | |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...Vea Mas HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. Vea Menos | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids...Vea Mas HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. Vea Menos | Request Sample |
| RHOPLEX™ 585 | Univar Solutions | RHOPLEX™ 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The lo...Vea Mas RHOPLEX™ 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The low coalescent demand of RHOPLEX™TM 585 allows the formulator to meet the 50g/VOC regulations while still maintaining some freeze thaw stability. Due to its 100% acrylic composition, RHOPLEX™TM 585 offers good exterior durability. Vea Menos | Request Sample |
| WorléePol® 6756 | Worlée-Chemie G.m.b.H. | Un saturada, resina de poliéster hidroxi funcional para la fabricación de disolventes a base de "sólidos ultra alto" 2 componentes sistemas PUR de reparación de pinturas industriales y automotriz, con buenas propiedades mecánicas y excelente resistencia q...Vea Mas Un saturada, resina de poliéster hidroxi funcional para la fabricación de disolventes a base de "sólidos ultra alto" 2 componentes sistemas PUR de reparación de pinturas industriales y automotriz, con buenas propiedades mecánicas y excelente resistencia química y al clima. Vea Menos | |
| MACRYNAL® SM 516/70BAC | Allnex | Macrynal® SM 516/70BAC es una resina acrílica que contiene grupos hidroxilo para la reticulación con poliisocianatos o melaminas. Se utiliza en sistemas de dos componentes de secado al aire y secado forzado con medio a alto contenido de sólidos con alto ...Vea Mas Macrynal® SM 516/70BAC es una resina acrílica que contiene grupos hidroxilo para la reticulación con poliisocianatos o melaminas. Se utiliza en sistemas de dos componentes de secado al aire y secado forzado con medio a alto contenido de sólidos con alto brillo. Tiene excelentes propiedades mecánicas, excelente resistencia química y una buena estabilidad al aire libre para el acabado de automóviles. Vea Menos | Request Sample |
| HPP-9598 | US Polymers - Accurez LLC | HPP-9598 is an innovative high solids hydroxyl functional polyester designed to crosslink with a polyisocyanates at room temperature to produce high performance finish coatings for a variety of industrial applications. This polyester has a decreased isocy...Vea Mas HPP-9598 is an innovative high solids hydroxyl functional polyester designed to crosslink with a polyisocyanates at room temperature to produce high performance finish coatings for a variety of industrial applications. This polyester has a decreased isocyanate demand and produces coatings with good hardness, chemical and abrasion resistance. The product is designed to be used over general industrial metal substrates and heavy equipment. The color and gloss retention of coatings with this product is much superior than two component epoxy systems. Vea Menos | Request Sample |
| tert-Butyl Methacrylate (TBMA) | Kowa American Corporation | Monómero de alto Tg que puede mejorar sustancialmente la erosión, la retención de brillo y resistencia al agua. | Request Sample |
| Ancamine® 2726 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2726 es una amina cicloalifática modificada que ofrece buen color y estabilidad del color. Proporciona alto brillo, películas sin arrebol con buena resistencia química. Este producto se utiliza en revestimientos de alto contenido en sólidos y si...Vea Mas Ancamine® 2726 es una amina cicloalifática modificada que ofrece buen color y estabilidad del color. Proporciona alto brillo, películas sin arrebol con buena resistencia química. Este producto se utiliza en revestimientos de alto contenido en sólidos y sin solventes, recubrimientos de gel y pisos autonivelantes. Vea Menos | Request Sample |
| MACRYNAL® SM 515/70BAC | Allnex | Macrynal® SM 515/70BAC es un agente reticulable de resina acrílica hidroxi-funcional con poliisocianatos, y cuando se combina con poliisocianatos alifáticos, se recomienda para sistemas de dos componentes de secado al aire y secado forzado con aire con al...Vea Mas Macrynal® SM 515/70BAC es un agente reticulable de resina acrílica hidroxi-funcional con poliisocianatos, y cuando se combina con poliisocianatos alifáticos, se recomienda para sistemas de dos componentes de secado al aire y secado forzado con aire con alto contenido en sólidos para revestimientos OEM y de reacabado de automóviles. Vea Menos | Request Sample |
| Eco-Set™ 4802 A | Lawter | Eco-Set™ 4802 A is an eco-friendly fast setting high solids gel vehicle with phenol formaldehyde-free and renewable content allowing it to comply with demands for a greener and cleaner ink chemistry. The product offers moderate gel structure and hard dryi...Vea Mas Eco-Set™ 4802 A is an eco-friendly fast setting high solids gel vehicle with phenol formaldehyde-free and renewable content allowing it to comply with demands for a greener and cleaner ink chemistry. The product offers moderate gel structure and hard drying features along with good gloss and enhanced ink film hardness. It is suitable for use in commercial sheet-fed and letterpress inks, along with uses in packaging sheet-fed inks and laser form inks. Vea Menos | |
| Michem® Prime 498340R | Michelman | Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical...Vea Mas Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical version of Michem® Prime 4983R. The adhesion properties of Michem® Prime facilitate its use as a primer for extrusion coatings. Utilizing this "tie coat" functionality, dissimilar materials can be combined to produce a substrate with the unique properties of each material. Vea Menos | |
| NACURE® 2500 | King Industries, Inc. | NACURE® 2500 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid and is made for low temperature curing and maximum viscosity stability. It offers good cure response, exterior durability, and waterborne or high solids...Vea Mas NACURE® 2500 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid and is made for low temperature curing and maximum viscosity stability. It offers good cure response, exterior durability, and waterborne or high solids coatings. This product is soluble in alcohols, glycol ethers, glycols, and water, partially soluble in ketones, and insoluble in aliphatic and aromatic hydrocarbons. It can be applied in general industrials, appliance finishes, automotive topcoats, and coil coatings. Vea Menos | |
| BECKOSOL® 6423-A4K4-75 | Polynt Composites | BECKOSOL® 6423-A4K4-75 is a high-solids, chain-stopped short-oil alkyd resin supplied at 75% non-volatiles in n-butyl acetate and methyl amyl ketones. This product does not contain HAPs. It can be used in industrial maintenance primers and topcoats, as we...Vea Mas BECKOSOL® 6423-A4K4-75 is a high-solids, chain-stopped short-oil alkyd resin supplied at 75% non-volatiles in n-butyl acetate and methyl amyl ketones. This product does not contain HAPs. It can be used in industrial maintenance primers and topcoats, as well as air-dry and force-dry finishes for farm implements, refinishes, and general industrial uses. This product dries rapidly, and the end product will have good humidity resistance and gloss retention. Vea Menos | |
| Carboset® AE-960 | Lubrizol Advanced Materials, Inc. | Carboset® AE-960 is a high solids, water-based, 100% acrylic emulsion specifically developed for elastomeric roofing and vertical masonry coatings. The robust nature of Carboset® AE-960 allows for flexibility in formulating tough, durable coatings for a b...Vea Mas Carboset® AE-960 is a high solids, water-based, 100% acrylic emulsion specifically developed for elastomeric roofing and vertical masonry coatings. The robust nature of Carboset® AE-960 allows for flexibility in formulating tough, durable coatings for a broad range of applications including bitumen, single-ply, metal, concrete block, brick, stucco, EIFS and fiber-cement surfaces. This flexibility allows Carboset® AE-960 to be formulated to satisfy codes and approvals, such as ASTM D 6083, across all geographic regions. Vea Menos | |
| Ecodis™ P 90 | Arkema Rheology & Specialty Additives | ECODIS P 90 asegura la dispersión completa de las extensiones y de los pigmentos inorgánicos en alto contenido de sólidos y en sistemas con alto P.V.C. (Cloruro de Polivinil) | Request Sample |
| Polisat 714-70 HF | Polidur San Luis | Resina poliester saturada al 70 % en high flash. Propiedades : Excelente resistencia al amarilleo. Excelente elasticidad y embutido. Muy buena reactividad en ciclos de horneo cortos. Aplicaciones : Esmaltes para coil coating. Esmaltes para can coating. Es...Vea Mas Resina poliester saturada al 70 % en high flash. Propiedades : Excelente resistencia al amarilleo. Excelente elasticidad y embutido. Muy buena reactividad en ciclos de horneo cortos. Aplicaciones : Esmaltes para coil coating. Esmaltes para can coating. Esmaltes horneables de altos sólidos. Vea Menos | |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...Vea Mas K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. Vea Menos | |
| SB 432 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ...Vea Mas SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part. Vea Menos | |
| BASONOL® HPE 1170 B | BASF Dispersions & Resins | Basonol® HPE 1170 B is a hyperbranched polyester polyol designed as a co-binder for 2K polyurethane coatings and 1K baking enamels for improved performance. It has low impact on VOC in high solids coating systems. It offers improved scratch resistance and...Vea Mas Basonol® HPE 1170 B is a hyperbranched polyester polyol designed as a co-binder for 2K polyurethane coatings and 1K baking enamels for improved performance. It has low impact on VOC in high solids coating systems. It offers improved scratch resistance and good reflow characteristics, improved early and final hardness, improved chemical resistance, low hydrolysis sensitivity, and excellent weathering performance. When used as a co-binder in 2K polyurethane coatings, Basonol HPE 1170 B additionally exhibits longer potlife and improved reflow behavior. Vea Menos | |
| Resiflow® L-67 | Estron Chemical, Inc. | Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and lev...Vea Mas Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and leveling (orange peel) and can improve the flexibility of coatings. Resiflow® L-67 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems, as the product has compatibility with all coating resins. Vea Menos | |
| BECKOSOL® 6422-K3-75 | Polynt Composites | BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construct...Vea Mas BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construction equipment finishes, among other uses. This product dries tack-free in two hours and provides good color and color retention. It has strong water-spot, humidity, and salt spray resistance and will retain gloss in exterior exposures. Vea Menos | |
| SILRES® HP 2000 | Wacker Chemical Corporation | SILRES® HP 2000 es una solución de resina de silicón fenilo metílica del amino funcional. | Request Sample |
| Ecodis™ P 30 | Arkema Rheology & Specialty Additives | ECODIS™ P 30 se debe añadir preferiblemente al agua antes de la incorporación del pigmento. El nivel óptimo es determinado para cada mezcla de pigmento, trazando el gráfico de las viscosidades de dispersión del pigmento en agua, versus la cantidad de disp...Vea Mas ECODIS™ P 30 se debe añadir preferiblemente al agua antes de la incorporación del pigmento. El nivel óptimo es determinado para cada mezcla de pigmento, trazando el gráfico de las viscosidades de dispersión del pigmento en agua, versus la cantidad de dispersor. Se elige el nivel de dispersor correspondiente a la viscosidad mínima. La cantidad requerida varía de 0.1% a 0.5% de ingredientes activos basados en el peso total de los pigmentos y rellenos. Vea Menos | Request Sample |
| CYMEL® 1161 | Allnex | La resina CYMEL® 1161 es un reticulante de melamina metilado/iso-butilado altamente monomérico con un alto grado de alquilación. Su alto contenido de monómero permite la formulación de revestimientos de alto contenido de sólidos con aspecto, adhesión al r...Vea Mas La resina CYMEL® 1161 es un reticulante de melamina metilado/iso-butilado altamente monomérico con un alto grado de alquilación. Su alto contenido de monómero permite la formulación de revestimientos de alto contenido de sólidos con aspecto, adhesión al revestimiento y flexibilidad excelentes. Está especialmente recomendado para capas protectoras de la industria automotriz, acabados metálicos en general, y revestimiento de bobinas. Vea Menos | Request Sample |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1220A-300 es un poliol de poliéster sólido al 100 % saturado altamente ramificado a base de TRIMET® TME (trimetiloletano). La estructura altamente ramificada de TRI-REZ® Polyol 1220A-300 lo hace una opción ideal para la formulación de reve...Vea Mas TRI-REZ® Polyol 1220A-300 es un poliol de poliéster sólido al 100 % saturado altamente ramificado a base de TRIMET® TME (trimetiloletano). La estructura altamente ramificada de TRI-REZ® Polyol 1220A-300 lo hace una opción ideal para la formulación de revestimientos de poliuretano con alto contenido sólido, de dos componentes, y elastómeros que requieren excelentes propiedades de resistencia química y la luz UV. Vea Menos | |
| NACURE® 2558 | King Industries, Inc. | NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially ef...Vea Mas NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially effective in controlling wrinkling, popping and blistering in high solids coatings. It is soluble in alcohols, water, glycols, glycol ethers, and is insoluble in aliphatic and aromatic hydrocarbons, esters, and ketones. This product can be applied in automotive finishes, waterborne coatings, coil coatings, and general industrials. Vea Menos | |
| Hauthane HD-2334 | Hauthaway | Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 w...Vea Mas Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. Vea Menos | |
| Pluriol® A 700 VP | BASF Formulation Technologies | Pluriol® A 700 VP provides plasticizing functionality within the field of emulsion polymerization. Compatible with ethynically-unsaturated monomers, this readily-biodegradable comonomer efficiently reduces MFFT (minimum film formation temperatures) in formulations, decreasing the need for coalescing agents without contributing to VOC content. The low Tg monomer (-70 C) is also capable of reducing viscosity of high-solids...Vea Mas Pluriol® A 700 VP provides plasticizing functionality within the field of emulsion polymerization. Compatible with ethynically-unsaturated monomers, this readily-biodegradable comonomer efficiently reduces MFFT (minimum film formation temperatures) in formulations, decreasing the need for coalescing agents without contributing to VOC content. The low Tg monomer (-70 C) is also capable of reducing viscosity of high-solids latex formulations while maintaining expected particle sizes. These distinctive performance factors make Pluriol A 700 VP a multifaceted tool for use in your next generation of EP formulating. Vea Menos | |
| NACURE® 3525 | King Industries, Inc. | NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, esp...Vea Mas NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, especially in high solids polyester and alkyd formulations. It offers good ahesion, salt spray and water resistance, and no wrinkling. It is soluble in water, alcohol, glycol ethers, ketones, and glycols. It is usually applied in metal decorating, automotive topcoats, coil coatings, can coatings, appliance finishes, general industrials, and electrostatic spray. Vea Menos | |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve fl...Vea Mas Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. Vea Menos | |
| Duramac® 51-5186 | Polynt Composites | Duramac® 51-5186 is a medium oil alkyd resin that can be formulated into high drink, lower solids coatings, can be used in air-dry or bake systems. | |
| SETAL® 26-1089 | Allnex | Setal® 26-1089 is a resin of saturated polyester, destined to be used in industrial finishes of high quality. This resin offers excellent curing qualities, hardness, chemical resistance, gloss retention, durability and resistance to calcination. Setal® 26...Vea Mas Setal® 26-1089 is a resin of saturated polyester, destined to be used in industrial finishes of high quality. This resin offers excellent curing qualities, hardness, chemical resistance, gloss retention, durability and resistance to calcination. Setal® 26-1089 has good compatibility with aliphatic solvents and limited compatibility with aromatic solvents. Vea Menos | Request Sample |
| BECKOPOX™ EP 140/80SNB | Allnex | Una resina de epoxi líquido. | Request Sample |
| TINUVIN® 123 | BASF Dispersions & Resins | Tinuvin® 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate sy...Vea Mas Tinuvin® 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate systems or one-coat opaque thermosetting acrylate and polyester coatings. Its low basicity prevents possible interactions with acidic paint ingredients such as catalysts. Its efficiency provides significant improvement in coatings performance by minimizing paint defects such as cracking and gloss reduction for clear coats as well as chalking for pigmented paints. Vea Menos | |
| Busperse® 39 | Buckman Laboratories, Inc. | Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Buspe...Vea Mas Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Busperse® 39 also provides excellent viscosity stability when using reactive pigments. It exhibits good color acceptance, is low foaming, and is not corrosive. Busperse® 39 has good compatibility with glycols and is therefore well-suited for use in gloss latex paint formulations. This product is a translucent, pale yellow liquid. Vea Menos | |
| K-KAT® 4205 | King Industries, Inc. | K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack fr...Vea Mas K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. Vea Menos | |
| EFKA® SI 2723 | BASF Formulation Additives | EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. On the other hand, it presents the advantage of low odor. EFKA® SI 2723 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy and polyurethane systems, low odor, high-solids...Vea Mas EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. On the other hand, it presents the advantage of low odor. EFKA® SI 2723 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy and polyurethane systems, low odor, high-solids two-pack systems and solvent-free radiation-curable systems. Vea Menos | |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids...Vea Mas HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| Sulfonex™ M-80 | Estron Chemical, Inc. | Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticizers. Solutions of Sulfonex™ M-80 have a low viscosity and offer the advantage of formulating high solids...Vea Mas Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticizers. Solutions of Sulfonex™ M-80 have a low viscosity and offer the advantage of formulating high solids lacquers. Sulfonex™ M-80 improves the compatibility of resins with plasticizers and pigments which may otherwise remain incompatible. In adhesives formulations, Sulfonex™ M-80 helps in bonding many substrates such as cellophane and aluminum foils to themselves or to paper. Vea Menos | |
| SILRES® SY 409 | Wacker Chemical Corporation | SILRES® SY 409 es un grupo metilfenil que contiene una solución de resina de silicona que se recomienda como aglutinante para pinturas resistentes al calor con contenido de sólidos medio o alto en combinación con otras resinas orgánicas. Es muy adecuado p...Vea Mas SILRES® SY 409 es un grupo metilfenil que contiene una solución de resina de silicona que se recomienda como aglutinante para pinturas resistentes al calor con contenido de sólidos medio o alto en combinación con otras resinas orgánicas. Es muy adecuado para la introducción de un componente de silicona compatible en otros sistemas aglutinantes para incrementar la resistencia al calor y a la intemperie y se aplica en revestimientos resistentes al calor. Vea Menos | Request Sample |
| AAEM | Kowa American Corporation | AAEM is a specialty methacrylic monomer with three available sites for chemical reaction. AAEM is used to formulate high solids solution acrylic resins and acrylic emulsions for lower VOC emission high performance industrial and architectural coatings. Th...Vea Mas AAEM is a specialty methacrylic monomer with three available sites for chemical reaction. AAEM is used to formulate high solids solution acrylic resins and acrylic emulsions for lower VOC emission high performance industrial and architectural coatings. The methacrylic functionality may be used to react AAEM into an acrylic polymer backbone, leaving an acetoacetyl group pendant to the polymer chain. This pendant group contains the two reactive sites which may be used to add substituents to the polymer or for cross-linking. Many reactions can be carried out at these sites. The chemistry of AAEM provides many new options for designing acrylic copolymer systems. Vea Menos | Request Sample |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | Un aditivo antiespumante y desaeración altamente eficaz, a base de silicona para pinturas a base de disolvente y tintas de impresión de composiciones diferentes. . | |
| JONCRYL® 551 | BASF Dispersions & Resins | Joncryl® 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially ...Vea Mas Joncryl® 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin. Joncryl® 551 differs from Joncryl® 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of Joncryl® 587. Vea Menos | |
| Talkron® Zero 11 | Minerals Girona S.A. | Talkron® Zero 11 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto...Vea Mas Talkron® Zero 11 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto contenido de sólidos. Este producto tiene un índice de ignición de 8'07%, un contenido soluble HCI de 3'70% y un corte superior de 25 micras. Vea Menos | |
| Talkron® Zero 18 | Minerals Girona S.A. | Talkron® Zero 18 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto...Vea Mas Talkron® Zero 18 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto contenido de sólidos. Este producto tiene un índice de ignición de 8'07%, un contenido soluble HCI de 3'70% y un corte superior de 40 micras. Vea Menos | |
| Talkron® Zero 22 | Minerals Girona S.A. | Talkron® Zero 22 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto...Vea Mas Talkron® Zero 22 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto contenido de sólidos. Este producto tiene un índice de ignición de 8'07%, un contenido soluble HCI de 3'70% y un corte superior de 70 micras. Vea Menos | |
| CYMEL® XW 3106 | Allnex | La resina CYMEL® XW 3106 es un agente de reticulación de melamina de alto contenido en sólidos, especialmente diseñado para formulaciones de dos componentes a base de solventes a temperaturas de horneado bajas y ambiente. El potencial de curado a baja tem...Vea Mas La resina CYMEL® XW 3106 es un agente de reticulación de melamina de alto contenido en sólidos, especialmente diseñado para formulaciones de dos componentes a base de solventes a temperaturas de horneado bajas y ambiente. El potencial de curado a baja temperatura para este agente de reticulación proporciona la oportunidad de formular revestimientos de alto rendimiento para sustratos sensibles al calor. Estos sistemas tienen unas excelentes propiedades de dureza temprana, resistencia, aspecto y flexibilidad en ciclos de frío-calor. Vea Menos | Request Sample |
| NUOSPERSE® 9100 | Elementis | NUOSPERSE® 9100 es un agente dispersante en polvo diseñado para sistemas con alto contenido de sólidos y UV. Es soluble en una amplia variedad de solventes, monómeros, diluyentes reactivos y es compatible con la mayoría de los sistemas no acuosos. Se pued...Vea Mas NUOSPERSE® 9100 es un agente dispersante en polvo diseñado para sistemas con alto contenido de sólidos y UV. Es soluble en una amplia variedad de solventes, monómeros, diluyentes reactivos y es compatible con la mayoría de los sistemas no acuosos. Se puede emplear como resina dispersante única para preparar dispersiones muy concentradas de pigmentos orgánicos e inorgánicos. Vea Menos | Request Sample |
| JONCRYL® 550 | BASF Dispersions & Resins | Joncryl® 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially ...Vea Mas Joncryl® 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin that is supplied in a 65/35 blend of PM-acetate/toluene. Joncryl® 550 differs from Joncryl® 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of Joncryl® 587. Vea Menos | |
| WorléeCryl® 7123 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7123 es una dispersión de copolímero acrílico con alto contenido de sólidos. Es muy elástica, incluso a baja temperatura y ofrece excelente resistencia al agua y a la intemperie y también adhesión en diferentes sustratos. Los campos de aplicac...Vea Mas WorléeCryl® 7123 es una dispersión de copolímero acrílico con alto contenido de sólidos. Es muy elástica, incluso a baja temperatura y ofrece excelente resistencia al agua y a la intemperie y también adhesión en diferentes sustratos. Los campos de aplicación incluyen masillas, revestimientos para techos y adhesivos que demandan una alta resistencia al álcali y la humedad. Debido a su alta resistencia al álcali, WorléeCryl® 7123 también puede usarse en concreto fresco. Vea Menos | |
| CYMEL® 327 | Allnex | La resina CYMEL® 327 es un reticulante de melamina, metilado, de alta funcionalidad de iminas suministrado en iso-butanol. Es altamente reactivo y tiene tendencia a la autocondensación a temperaturas normales de horneado, lo que proporciona películas con ...Vea Mas La resina CYMEL® 327 es un reticulante de melamina, metilado, de alta funcionalidad de iminas suministrado en iso-butanol. Es altamente reactivo y tiene tendencia a la autocondensación a temperaturas normales de horneado, lo que proporciona películas con buena dureza, brillo, resistencia química y durabilidad en el exterior. Su principal ventaja en comparación a otras resinas de alta funcionalidad de iminas es su potencial a VOC en formulaciones con alto contenido de sólidos. Vea Menos | Request Sample |
| DISPERBYK®-2164 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para sistemas transmitidos por solvente y concentrados de pigmento. Soluciones de los copolímeros de bloque, de peso molecular alto, con grupos afines al pigmento. | Request Sample |
